function with distinct.
Loose index scan is used to find MIN/MAX values using appropriate index and
thus allow to avoid grouping. For each found row it updates non-aggregated
fields with values from row with found MIN/MAX value.
Without loose index scan non-aggregated fields are copied by end_send_group
function. With loose index scan there is no need in end_send_group and
end_send is used instead. Non-aggregated fields still need to be copied and
this was wrongly implemented in QUICK_GROUP_MIN_MAX_SELECT::get_next.
WL#3220 added a case when loose index scan can be used with end_send_group to
optimize calculation of aggregate functions with distinct. In this case
the row found by QUICK_GROUP_MIN_MAX_SELECT::get_next might belong to a next
group and copying it will produce wrong result.
Update of non-aggregated fields is moved to the end_send function from
QUICK_GROUP_MIN_MAX_SELECT::get_next.
mysql-test/r/group_min_max.result:
Added a test case for the bug#50539.
mysql-test/t/group_min_max.test:
Added a test case for the bug#50539.
sql/opt_range.cc:
Bug#50539: Wrong result when loose index scan is used for an aggregate
function with distinct.
Update of non-aggregated fields is moved to the end_send function from
QUICK_GROUP_MIN_MAX_SELECT::get_next.
sql/sql_select.cc:
Bug#50539: Wrong result when loose index scan is used for an aggregate
function with distinct.
Update of non-aggregated fields is moved to the end_send function from
QUICK_GROUP_MIN_MAX_SELECT::get_next.
--slave-load-tm
The MDL_SHARED lock was introduced for an object in 5.4, but the 'TABLE_LIST'
object was not initialized with the MDL_SHARED lock when applying event with
LOAD DATA INFILE into table. So the failure is caused when checking the
MDL_SHARED lock for the object.
To fix the problem, the 'TABLE_LIST' object was initialized with the MDL_SHARED
lock when applying event with LOAD DATA INFILE into table.
mysql-test/suite/rpl/t/disabled.def:
Got rid of the line for enabling 'rpl_cross_version' test.
causing crashes!
Adding a SPATIAL INDEX on a non-geometrical column caused a
segmentation fault when the table was subsequently
inserted into.
A test was added in mysql_prepare_create_table to explicitly
check whether non-geometrical columns are used in a
spatial index, and throw an error if so.
mysql-test/t/gis.test:
Added test cases to verify that only geometrical
columns can get a spatial index.
In addition, verify that only a single geom.
column can participate in a spatial index.
corruption and crash results
An index creation statement where the index key
is larger/wider than the column it references
should throw an error.
A statement like:
CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (A(255)))
did not error, but a segmentation fault followed when
an insertion was attempted on the table
The partial key validiation clause has been
restructured to (hopefully) better document which
uses of partial keys are valid.
We found that there are some tests that are not cleaning
up properly:
1. rpl_tmp_table_and_DDL
2. rpl_do_grant
3. rpl_sync
For #1 and #2 we found that the slave would not, for some
cases, replicate all the instructions the master processed
in the cleanup section. We fix these by deploying some
synchronization commands in the test cases so that slave
processes all clean up instructions.
As for #3, this is tracked as part of another bug
(BUG@50442).
Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
and the innodb monitor thread has no binding to that thd object. This cause
the crash because of bad derefencing.
Solution was to add a new macro which take the thd as an argument (which the innodb
thread uses for the call).
(Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
moved test to suite parts.)
mysql-test/suite/parts/r/partition_innodb_status_file.result:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test result file
mysql-test/suite/parts/t/partition_innodb_status_file-master.opt:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test opt file
mysql-test/suite/parts/t/partition_innodb_status_file.test:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test.
Note that the innodb monitor thread only runs every 15 seconds, so this
test will take at least 15 seconds, so I have moved it to the parts suite.
sql/sql_table.cc:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
Using thd safe ER macro.
sql/unireg.h:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
Added ER macros for use with specified thd pointer.
fails in PB sporadically)
The IO thread can concurrently access the relay log IO_CACHE
while another thread is performing an FLUSH LOGS procedure.
FLUSH LOGS closes and reopens the relay log and while doing so it
(re)initializes its IO_CACHE. During this procedure the IO_CACHE
mutex is also reinitialized, which can cause problems if some
other thread (namely the IO THREAD) is concurrently accessing it
at the time .
This patch fixes the problem by extending the interface of the
flush_master_info function to also include a second paramater,
"need_relay_log_lock", stating whether the thread should grab the
relay log lock or not before actually flushing the relay log.
Also, IO thread now calls flush_master_info with this flag set
when it flushes master info with in the event read_event loop.
Finally, we also increase loop time in rpl_heartbeat_basic test
case, so that the number of calls to flush logs doubles, stressing
this part of the code a little more.
mysql-test/suite/rpl/t/rpl_heartbeat_basic.test:
Doubled the number of iterations on the FLUSH LOGS loop by
doubling the time available to perform all iterations.
sql/repl_failsafe.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/rpl_mi.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/rpl_mi.h:
Changed flush_master_info interface. Now takes a second parameter
instead of just one. The second parameter is: need_lock_relay_log.
sql/rpl_rli.cc:
Small fix in comment.
sql/slave.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
sql/sql_repl.cc:
Updating flush_master_info call so that it uses two parameters
instead of one.
write()/read()
Sometimes stop/restart master or stop/restart salve can cause
network error, which can cause the 'invalid file descriptor
-1 in syscall write()/read()' warnings. All involved test
cases except rpl_slave_load_remove_tmpfile belong to the
kind of network error. So they are expected.
The 'rpl_slave_load_remove_tmpfile' belongs to file error,
but it is testing the file error as following code:
DBUG_EXECUTE_IF("remove_slave_load_file_before_write",
my_close(fd,MYF(0)); fd= -1; my_delete(fname, MYF(0)););
So it's expected too.
To fix the problem, add the valgrind warnings to the global
suppression list to suppress it.
mysql-test/include/mtr_warnings.sql:
Added code to suppress valgrind warnings: invalid file
descriptor -1 in syscall write()/read().
The test case rpl_binlog_corruption fails on windows because when
adding a line to the binary log index file it gets terminated
with a CR+LF (which btw, is the normal case in windows, but not on
Unixes - LF). This causes mismatch between the relay log names,
causing mysqld to report that it cannot find the log file.
We fix this by creating the instrumented index file through
mysql, ie, using SELECT ... INTO DUMPFILE ..., as opposed on
relying on ultimatly OS commands like: -- echo "..." >
index. These changes go into the file and make the procedure
platform independent:
include/setup_fake_relay_log.inc
Side note: when using SELECT ... INTO DUMPFILE ..., one needs to
check if mysqld is running with secure_file_priv. If it is, we do
it in two steps: 1. create the file on the allowed location;
2. move it to the datadir. If it is not, then we just create the
file directly on the datadir (so previous step 2. is not needed).
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
The root cause of the crash is that a TranxNode is freed before it is used.
A TranxNode is allocated and inserted into the active list each time
a log event is written and flushed into the binlog file.
The memory for TranxNode is allocated with thd_alloc and will be freed
at the end of the statement. The after_commit/after_rollback callback
was supposed to be called before the end of each statement and remove the node from
the active list. However this assumption is not correct in all cases(e.g. call
'CREATE TEMPORARY TABLE myisam_t SELECT * FROM innodb_t' in a transaction
and delete all temporary tables automatically when a session closed),
and can cause the memory allocated for TranxNode be freed
before it was removed from the active list. So The TranxNode pointer in the active
list would become a wild pointer and cause the crash.
After this patch, We have a class called a TranxNodeAllocate which manages the memory
for allocating and freeing TranxNode. It uses my_malloc to allocate memory.
sql/rpl_handler.cc:
params are not initialized.
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
column is used for ORDER BY
Problem: filesort isn't meant for null length sort data
(e.g. char(0)), that leads to a server crash.
Fix: disregard sort order if sort data record length is 0 (nothing
to sort).
mysql-test/r/select.result:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test result.
mysql-test/t/select.test:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test case.
sql/filesort.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- assert added as filesort cannot handle null length sort data.
sql/sql_select.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- don't sort null length data e.g. in case of ORDER BY CHAR(0).
- main.outfile_loaddata @solaris due to Bug#46895
- main.signal_demo3 @solaris due to Bug#47791
- main.sp @solaris due to Bug#47791
- rpl.rpl_slave_load_remove_tmpfile @windows due to Bug#50474
in multitable delete/subquery
SQL_BUFFER_RESULT should not have an effect on non-SELECT
statements according to our documentation.
Fixed by not passing it through to multi-table DELETE (similarly
to how it's done for multi-table UPDATE).
