~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
MySQL Bug#71095: Wrong results with PARTITION BY LIST COLUMNS()
MySQL Bug#72803: Wrong "Impossible where" with LIST partitioning
MDEV-6240: Wrong "Impossible where" with LIST partitioning
- Backprot the fix from MySQL Bug#71095.
CORRUPTS FRM
Analysis:
---------
ALTER TABLE on a partitioned table resulted in the wrong
engine being written into the table's FRM file and displayed
in SHOW CREATE TABLE.
The prep_alter_part_table() modifies the partition_info object
for TABLE instance representing the old version of table.
If the ALTER TABLE ENGINE statement fails, the partition_info
object for the TABLE contains the altered storage engine name.
The SHOW CREATE TABLE uses the TABLE object to display the table
information, hence displays incorrect storage engine for the table.
Also a subsequent successful ALTER TABLE operation will write the
incorrect engine information into the FRM file.
Fix:
---
A copy of the partition_info object is created before modification so
that any changes would not cause the the original partition_info object
to be modified if the ALTER TABLE fails.(Backported part of the code
provided as fix for bug#14156617 in mysql-5.6.6).
Typo leading to not including the last list values (partition).
Also improved pruning to skip last partition if not used.
rb#4762 approved by Aditya and Marko.
AS A INNODB PARTITTION.
PROBLEM
-------
The correct engine_type was not being set during
rebuild of the partition due to which the handler
was always created with the default engine,
which is innodb for 5.5+ ,therefore even if the
table was myisam, after rebuilding the partitions
ended up as innodb partitions.
FIX
---
Set the correct engine type during rebuild.
[Approved by mattiasj #rb3599]
Inside a loop in a stored procedure, we create a partitioned
table. The CREATE statement is thus treated as a prepared statement:
it is prepared once, and then executed by each iteration. Thus its Lex
is reused many times. This Lex contains a part_info member, which
describes how the partitions should be laid out, including the
partitioning function. Each execution of the CREATE does this, in
open_table_from_share ():
tmp= mysql_unpack_partition(thd, share->partition_info_str,
share->partition_info_str_len,
outparam, is_create_table,
share->default_part_db_type,
&work_part_info_used);
...
tmp= fix_partition_func(thd, outparam, is_create_table);
The first line calls init_lex_with_single_table() which creates
a TABLE_LIST, necessary for the "field fixing" which will be
done by the second line; this is how it is created:
if ((!(table_ident= new Table_ident(thd,
table->s->db,
table->s->table_name, TRUE))) ||
(!(table_list= select_lex->add_table_to_list(thd,
table_ident,
NULL,
0))))
return TRUE;
it is allocated in the execution memory root.
Then the partitioning function ("id", stored in Lex -> part_info)
is fixed, which calls Item_ident:: fix_fields (), which resolves
"id" to the table_list above, and stores in the item's
cached_table a pointer to this table_list.
The table is created, later it is dropped by another statement,
then we execute again the prepared CREATE. This reuses the Lex,
thus also its part_info, thus also the item representing the
partitioning function (part_info is cloned but it's a shallow
cloning); CREATE wants to fix the item again (which is
normal, every execution fixes items again), fix_fields ()
sees that the cached_table pointer is set and picks up the
pointed table_list. But this last object does not exist
anymore (it was allocated in the execution memory root of
the previous execution, so it has been freed), so we access
invalid memory.
The solution: when creating the table_list, mark that it
cannot be cached.
The problem was in get_partition_id_cols_range_for_endpoint
and cmp_rec_and_tuple_prune, which stepped one partition too long.
Solution was to move a small portion of logic to cmp_rec_and_tuple_prune,
to simplify both get_partition_id_cols_range_for_endpoint and
get_partition_id_cols_list_for_endpoint.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
Due to an internal change in the server code in between 5.1 and 5.5
(wl#2649) the hash function used in KEY partitioning changed
for numeric and date/time columns (from binary hash calculation
to character based hash calculation).
Also enum/set changed from latin1 ci based hash calculation to
binary hash between 5.1 and 5.5. (bug#11759782).
These changes makes KEY [sub]partitioned tables on any of
the affected column types incompatible with 5.5 and above,
since the calculation of partition id differs.
Also since InnoDB asserts that a deleted row was previously
read (positioned), the server asserts on delete of a row that
is in the wrong partition.
The solution for this situation is:
1) The partitioning engine will check that delete/update will go to the
partition the row was read from and give an error otherwise, consisting
of the rows partitioning fields. This will avoid asserts in InnoDB and
also alert the user that there is a misplaced row. A detailed error
message will be given, including an entry to the error log consisting
of both table name, partition and row content (PK if exists, otherwise
all partitioning columns).
2) A new optional syntax for KEY () partitioning in 5.5 is allowed:
[SUB]PARTITION BY KEY [ALGORITHM = N] (list_of_cols)
Where N = 1 uses the same hashing as 5.1 (Numeric/date/time fields uses
binary hashing, ENUM/SET uses charset hashing) N = 2 uses the same
hashing as 5.5 (Numeric/date/time fields uses charset hashing,
ENUM/SET uses binary hashing). If not set on CREATE/ALTER it will
default to 2.
This new syntax should probably be ignored by NDB.
3) Since there is a demand for avoiding scanning through the full
table, during upgrade the ALTER TABLE t PARTITION BY ... command is
considered a no-op (only .frm change) if everything except ALGORITHM
is the same and ALGORITHM was not set before, which allows manually
upgrading such table by something like:
ALTER TABLE t PARTITION BY KEY ALGORITHM = 1 () or
ALTER TABLE t PARTITION BY KEY ALGORITHM = 2 ()
4) Enhanced partitioning with CHECK/REPAIR to also check for/repair
misplaced rows. (Also works for ALTER TABLE t CHECK/REPAIR PARTITION)
CHECK FOR UPGRADE:
If the .frm version is < 5.5.3
and uses KEY [sub]partitioning
and an affected column type
then it will fail with an message:
KEY () partitioning changed, please run:
ALTER TABLE `test`.`t1` PARTITION BY KEY ALGORITHM = 1 (a)
PARTITIONS 12
(i.e. current partitioning clause, with the addition of
ALGORITHM = 1)
CHECK without FOR UPGRADE:
if MEDIUM (default) or EXTENDED options are given:
Scan all rows and verify that it is in the correct partition.
Fail for the first misplaced row.
REPAIR:
if default or EXTENDED (i.e. not QUICK/USE_FRM):
Scan all rows and every misplaced row is moved into its correct
partitions.
5) Updated mysqlcheck (called by mysql_upgrade) to handle the
new output from CHECK FOR UPGRADE, to run the ALTER statement
instead of running REPAIR.
This will allow mysql_upgrade (or CHECK TABLE t FOR UPGRADE) to upgrade
a KEY [sub]partitioned table that has any affected field type
and a .frm version < 5.5.3 to ALGORITHM = 1 without rebuild.
Also notice that if the .frm has a version of >= 5.5.3 and ALGORITHM
is not set, it is not possible to know if it consists of rows from
5.1 or 5.5! In these cases I suggest that the user does:
(optional)
LOCK TABLE t WRITE;
SHOW CREATE TABLE t;
(verify that it has no ALGORITHM = N, and to be safe, I would suggest
backing up the .frm file, to be used if one need to change to another
ALGORITHM = N, without needing to rebuild/repair)
ALTER TABLE t <old partitioning clause, but with ALGORITHM = N>;
which should set the ALGORITHM to N (if the table has rows from
5.1 I would suggest N = 1, otherwise N = 2)
CHECK TABLE t;
(here one could use the backed up .frm instead and change to a new N
and run CHECK again and see if it passes)
and if there are misplaced rows:
REPAIR TABLE t;
(optional)
UNLOCK TABLES;
Analysis:
---------
When the server is out of memory, an error is raised
to indicate the same. Handling the error requires
more memory to be allocated which fails, hence the
error handling loops in a recursion and causes the
server to crash.
Fix:
---
a) Prevents pushing the 'out of memory' error condition
to the diagnostic area as it requires memory allocation.
GET DIAGNOSTICS, SHOW WARNINGS and SHOW ERRORS statements
will not show information about this error. However the
'out of memory' error is returned to the client.
b) It sets the ME_FATALERROR flag when 'out of memory' errors
are reported (for places where the flag is not already set).
This flag prevents activation of SP error handlers which also
require memory allocation and therefore are likely to fail.
INCLUDES FIRST PARTITION WHEN PRUNING
PROBLEM
-------
TO_DAYS()/TO_SECONDS() can return NULL for invalid dates which
was stored in the first partition ,therefore the first partition
was always included for the scan when range was specified.
FIX
---
The fix is a small optimization which we have included ,which will
prune the scanning of NULL/first partition if the dates specified
in the range are valid and in the same year and month . TO_SECONDS()
function is not supported in 5.1 so removed it from the fix and test
scripts for mysql-5.1 version.
mysql-test/r/partition.result:
Added test case
mysql-test/t/partition.test:
Added test case
sql/sql_partition.cc:
Do mysql_trans_prepare_alter_copy_data() after all original tables are locked.
(We don't want to disable transactions for the original tables, that still may be in the cache)
sql/sql_table.cc:
Fixed two wrong DBUG_ENTER
Changed HA_EXTRA_NORMAL to HA_EXTRA_NOT_USED (more clean)
mysql-test/suite/maria/lock.result:
More extensive tests of LOCK TABLE with FLUSH and REPAIR
mysql-test/suite/maria/lock.test:
More extensive tests of LOCK TABLE with FLUSH and REPAIR
sql/sql_admin.cc:
Fix that REPAIR TABLE ... USE_FRM works with LOCK TABLES
sql/sql_base.cc:
Ensure that transactions are closed in ARIA when doing flush
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
Don't call extra many times for a table in close_all_tables_for_name()
Added test if table_list->table as this can happen in error situations
sql/sql_partition.cc:
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
sql/sql_reload.cc:
Fixed comment
sql/sql_table.cc:
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
sql/sql_trigger.cc:
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
sql/sql_truncate.cc:
HA_EXTRA_FORCE_REOPEN -> HA_EXTRA_PREPARE_FOR_DROP for truncate, as this speeds up truncate by not having to flush the cache to disk.
mysql-test/suite/maria/maria-partitioning.result:
New test case
mysql-test/suite/maria/maria-partitioning.test:
New test case
sql/sql_base.cc:
Ignore HA_EXTRA_NORMAL for wait_while_table_is_used()
More DBUG
sql/sql_partition.cc:
Don't use HA_EXTRA_FORCE_REOPEN for wait_while_table_is_used() as the table is opened multiple times (in prep_alter_part_table)
This fixes the assert in Aria where we check if table is opened multiple times if HA_EXTRA_FORCE_REOPEN is issued
- 5.5 was missing calls to ha_extra(HA_PREPARE_FOR_DROP | HA_PREPARE_FOR_RENAME); Lost in merge 5.3 -> 5.5
sql/sql_admin.cc:
Updated arguments for close_all_tables_for_name
sql/sql_base.h:
Updated arguments for close_all_tables_for_name
sql/sql_partition.cc:
Updated arguments for close_all_tables_for_name
sql/sql_table.cc:
Updated arguments for close_all_tables_for_name
Removed test of kill, as we have already called 'ha_extra(HA_PREPARE_FOR_DROP)' and the table may be inconsistent.
sql/sql_trigger.cc:
Updated arguments for close_all_tables_for_name
sql/sql_truncate.cc:
For truncate that is done with drop + recreate, signal that the table will be dropped.
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
ALTER TABLE AFTER DROP PARTITION
Bug#13608188 - 64038: CRASH IN HANDLER::HA_THD ON ALTER TABLE AFTER
REPAIR NON-EXISTING PARTITION
Backport of bug#13357766 from -trunk to -5.5.
The state of some partitions was not reset on failure, leading
to invalid states of partitions in consequent statements.
Fixed by reverting back to original state for all partitions
if not all partition names was resolved.
Also adding extra security by forcing tables to be reopened
in case of error in mysql_alter_table.
(There is also removal of \r at the end of some lines.)
client/CMakeLists.txt:
1. -rdynamic is a linker flag.
2. it should be used in all builds, not debug only
libmysql/get_password.c:
prefer a standard function, when possible
(otherwise a plugin will need to load it from the client)
- ensure that mtr supressions table is flushed before doing controlled crash and restart
- use DBUG_SUICIDE() rather than abort() in partition tests - avoids a crash message/warning
- disable perfschema all_instances test on Windows- there are legitimate reasons for output to be different on Unix (some different threads, some different locks), the differences are expected to grow in the future, e.g with threadpool.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
In sql_class.cc, 'row_count', of type 'ha_rows', was used as last argument for
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD which is
"Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld".
So 'ha_rows' was used as 'long'.
On SPARC32 Solaris builds, 'long' is 4 bytes and 'ha_rows' is 'longlong' i.e. 8 bytes.
So the printf-like code was reading only the first 4 bytes.
Because the CPU is big-endian, 1LL is 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01
so the first four bytes yield 0. So the warning message had "row 0" instead of
"row 1" in test outfile_loaddata.test:
-Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 1
+Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 0
All error-messaging functions which internally invoke some printf-life function
are potential candidate for such mistakes.
One apparently easy way to catch such mistakes is to use
ATTRIBUTE_FORMAT (from my_attribute.h).
But this works only when call site has both:
a) the format as a string literal
b) the types of arguments.
So:
func(ER(ER_BLAH), 10);
will silently not be checked, because ER(ER_BLAH) is not known at
compile time (it is known at run-time, and depends on the chosen
language).
And
func("%s", a va_list argument);
has the same problem, as the *real* type of arguments is not
known at this site at compile time (it's known in some caller).
Moreover,
func(ER(ER_BLAH));
though possibly correct (if ER(ER_BLAH) has no '%' markers), will not
compile (gcc says "error: format not a string literal and no format
arguments").
Consequences:
1) ATTRIBUTE_FORMAT is here added only to functions which in practice
take "string literal" formats: "my_error_reporter" and "print_admin_msg".
2) it cannot be added to the other functions: my_error(),
push_warning_printf(), Table_check_intact::report_error(),
general_log_print().
To do a one-time check of functions listed in (2), the following
"static code analysis" has been done:
1) replace
my_error(ER_xxx, arguments for substitution in format)
with the equivalent
my_printf_error(ER_xxx,ER(ER_xxx), arguments for substitution in
format),
so that we have ER(ER_xxx) and the arguments *in the same call site*
2) add ATTRIBUTE_FORMAT to push_warning_printf(),
Table_check_intact::report_error(), general_log_print()
3) replace ER(xxx) with the hard-coded English text found in
errmsg.txt (like: ER(ER_UNKNOWN_ERROR) is replaced with
"Unknown error"), so that a call site has the format as string literal
4) this way, ATTRIBUTE_FORMAT can effectively do its job
5) compile, fix errors detected by ATTRIBUTE_FORMAT
6) revert steps 1-2-3.
The present patch has no compiler error when submitted again to the
static code analysis above.
It cannot catch all problems though: see Field::set_warning(), in
which a call to push_warning_printf() has a variable error
(thus, not replacable by a string literal); I checked set_warning() calls
by hand though.
See also WL 5883 for one proposal to avoid such bugs from appearing
again in the future.
The issues fixed in the patch are:
a) mismatch in types (like 'int' passed to '%ld')
b) more arguments passed than specified in the format.
This patch resolves mismatches by changing the type/number of arguments,
not by changing error messages of sql/share/errmsg.txt. The latter would be wrong,
per the following old rule: errmsg.txt must be as stable as possible; no insertions
or deletions of messages, no changes of type or number of printf-like format specifiers,
are allowed, as long as the change impacts a message already released in a GA version.
If this rule is not followed:
- Connectors, which use error message numbers, will be confused (by insertions/deletions
of messages)
- using errmsg.sys of MySQL 5.1.n with mysqld of MySQL 5.1.(n+1)
could produce wrong messages or crash; such usage can easily happen if
installing 5.1.(n+1) while /etc/my.cnf still has --language=/path/to/5.1.n/xxx;
or if copying mysqld from 5.1.(n+1) into a 5.1.n installation.
When fixing b), I have verified that the superfluous arguments were not used in the format
in the first 5.1 GA (5.1.30 'bteam@astra04-20081114162938-z8mctjp6st27uobm').
Had they been used, then passing them today, even if the message doesn't use them
anymore, would have been necessary, as explained above.
include/my_getopt.h:
this function pointer is used only with "string literal" formats, so we can add
ATTRIBUTE_FORMAT.
mysql-test/collections/default.experimental:
test should pass now
sql/derror.cc:
by having a format as string literal, ATTRIBUTE_FORMAT check becomes effective.
sql/events.cc:
Change justified by the following excerpt from sql/share/errmsg.txt:
ER_EVENT_SAME_NAME
eng "Same old and new event name"
ER_EVENT_SET_VAR_ERROR
eng "Error during starting/stopping of the scheduler. Error code %u"
sql/field.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_DISPLAYWIDTH 42000 S1009
eng "Display width out of range for column '%-.192s' (max = %lu)"
sql/ha_ndbcluster.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/ha_ndbcluster_binlog.cc:
Too many arguments for:
ER_GET_ERRMSG
eng "Got error %d '%-.100s' from %s"
Patch by Jonas Oreland.
sql/ha_partition.cc:
print_admin_msg() is used only with a literal as format, so ATTRIBUTE_FORMAT
works.
sql/handler.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/item_create.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
'c_len' and 'c_dec' are char*, passed as %d !! We don't know their value
(as strtoul() failed), but they are likely big, so we use INT_MAX.
'len' is ulong.
sql/item_func.cc:
ER_WARN_DATA_OUT_OF_RANGE 22003
eng "Out of range value for column '%s' at row %ld"
ER_CANT_FIND_UDF
eng "Can't load function '%-.192s'"
sql/item_strfunc.cc:
ER_TOO_BIG_FOR_UNCOMPRESS
eng "Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)"
max_allowed_packet is ulong.
sql/mysql_priv.h:
sql_print_message_func is a function _pointer_.
sql/sp_head.cc:
ER_SP_RECURSION_LIMIT
eng "Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %.192s"
max_sp_recursion_depth is ulong
sql/sql_acl.cc:
ER_PASSWORD_NO_MATCH 42000
eng "Can't find any matching row in the user table"
ER_CANT_CREATE_USER_WITH_GRANT 42000
eng "You are not allowed to create a user with GRANT"
sql/sql_base.cc:
ER_NOT_KEYFILE
eng "Incorrect key file for table '%-.200s'; try to repair it"
ER_TOO_MANY_TABLES
eng "Too many tables; MySQL can only use %d tables in a join"
MAX_TABLES is size_t.
sql/sql_binlog.cc:
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_class.cc:
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD
eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld"
WARN_DATA_TRUNCATED 01000
eng "Data truncated for column '%s' at row %ld"
sql/sql_connect.cc:
ER_HANDSHAKE_ERROR 08S01
eng "Bad handshake"
ER_BAD_HOST_ERROR 08S01
eng "Can't get hostname for your address"
sql/sql_insert.cc:
ER_WRONG_VALUE_COUNT_ON_ROW 21S01
eng "Column count doesn't match value count at row %ld"
sql/sql_parse.cc:
ER_WARN_HOSTNAME_WONT_WORK
eng "MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work"
ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT
eng "Too high level of nesting for select"
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_partition.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_plugin.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_prepare.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
ER_UNKNOWN_STMT_HANDLER
eng "Unknown prepared statement handler (%.*s) given to %s"
length value (for '%.*s') must be 'int', per the doc of printf()
and the code of my_vsnprintf().
sql/sql_show.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_table.cc:
ER_TOO_BIG_FIELDLENGTH 42000 S1009
eng "Column length too big for column '%-.192s' (max = %lu); use BLOB or TEXT instead"
sql/table.cc:
ER_NOT_FORM_FILE
eng "Incorrect information in file: '%-.200s'"
ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE
eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error."
table->s->mysql_version is ulong.
sql/unireg.cc:
ER_TOO_LONG_TABLE_COMMENT
eng "Comment for table '%-.64s' is too long (max = %lu)"
ER_TOO_LONG_FIELD_COMMENT
eng "Comment for field '%-.64s' is too long (max = %lu)"
ER_TOO_BIG_ROWSIZE 42000
eng "Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
Fixed that connection string is returned for partitioned federated tables.
mysql-test/r/partition_federated.result:
Fixed error message
mysql-test/suite/federated/federated_partition.result:
Added test to show that connection string is returned in 'show create'.
sql/ha_partition.cc:
Fixed a set of bugs introduced by the last federated patch:
- We can't allocate m_ordered_rec_buffer in memroot as it has to survive call to clear_handler_file()
sql/partition_element.h:
Ensure that connect_string is properly initialized.
(This caused crashed in partition tests)
sql/sql_partition.cc:
Print CONNECTION option for federated partitioned tables
multiple columns in the partition key
ndb crash if duplicate columns in the partitioning key.
Backport from mysql-5.1-telco-7.0, see bug#53354.
Changed from case sensitive field name comparision
to non case sensitive too.
mysql-test/r/partition_error.result:
updated result
mysql-test/t/partition_error.test:
Added test for the error in non-ndb partitioned table.
sql/sql_partition.cc:
Added check for duplicated field names in the
partitioning key.
