"Table is already up to date" vs. "OK"
On MacOSX 10.5 when you cast something to "bool"
(the built in C type) it takes values 0 or 1
instead of 0-255 as it seems to be on older compilers.
Fixed by removing the typecast (not needed).
No test case needed : there are tests that test it.
corrupts a MERGE table
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Bug 25038 - Waiting TRUNCATE
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Bug 19627 - temporary merge table locking
Bug 27660 - Falcon: merge table possible
Bug 30273 - merge tables: Can't lock file (errno: 155)
The problems were:
Bug 26379 - Combination of FLUSH TABLE and REPAIR TABLE
corrupts a MERGE table
1. A thread trying to lock a MERGE table performs busy waiting while
REPAIR TABLE or a similar table administration task is ongoing on
one or more of its MyISAM tables.
2. A thread trying to lock a MERGE table performs busy waiting until all
threads that did REPAIR TABLE or similar table administration tasks
on one or more of its MyISAM tables in LOCK TABLES segments do UNLOCK
TABLES. The difference against problem #1 is that the busy waiting
takes place *after* the administration task. It is terminated by
UNLOCK TABLES only.
3. Two FLUSH TABLES within a LOCK TABLES segment can invalidate the
lock. This does *not* require a MERGE table. The first FLUSH TABLES
can be replaced by any statement that requires other threads to
reopen the table. In 5.0 and 5.1 a single FLUSH TABLES can provoke
the problem.
Bug 26867 - LOCK TABLES + REPAIR + merge table result in
memory/cpu hogging
Trying DML on a MERGE table, which has a child locked and
repaired by another thread, made an infinite loop in the server.
Bug 26377 - Deadlock with MERGE and FLUSH TABLE
Locking a MERGE table and its children in parent-child order
and flushing the child deadlocked the server.
Bug 25038 - Waiting TRUNCATE
Truncating a MERGE child, while the MERGE table was in use,
let the truncate fail instead of waiting for the table to
become free.
Bug 25700 - merge base tables get corrupted by
optimize/analyze/repair table
Repairing a child of an open MERGE table corrupted the child.
It was necessary to FLUSH the child first.
Bug 30275 - Merge tables: flush tables or unlock tables
causes server to crash
Flushing and optimizing locked MERGE children crashed the server.
Bug 19627 - temporary merge table locking
Use of a temporary MERGE table with non-temporary children
could corrupt the children.
Temporary tables are never locked. So we do now prohibit
non-temporary chidlren of a temporary MERGE table.
Bug 27660 - Falcon: merge table possible
It was possible to create a MERGE table with non-MyISAM children.
Bug 30273 - merge tables: Can't lock file (errno: 155)
This was a Windows-only bug. Table administration statements
sometimes failed with "Can't lock file (errno: 155)".
These bugs are fixed by a new implementation of MERGE table open.
When opening a MERGE table in open_tables() we do now add the
child tables to the list of tables to be opened by open_tables()
(the "query_list"). The children are not opened in the handler at
this stage.
After opening the parent, open_tables() opens each child from the
now extended query_list. When the last child is opened, we remove
the children from the query_list again and attach the children to
the parent. This behaves similar to the old open. However it does
not open the MyISAM tables directly, but grabs them from the already
open children.
When closing a MERGE table in close_thread_table() we detach the
children only. Closing of the children is done implicitly because
they are in thd->open_tables.
For more detail see the comment at the top of ha_myisammrg.cc.
Changed from open_ltable() to open_and_lock_tables() in all places
that can be relevant for MERGE tables. The latter can handle tables
added to the list on the fly. When open_ltable() was used in a loop
over a list of tables, the list must be temporarily terminated
after every table for open_and_lock_tables().
table_list->required_type is set to FRMTYPE_TABLE to avoid open of
special tables. Handling of derived tables is suppressed.
These details are handled by the new function
open_n_lock_single_table(), which has nearly the same signature as
open_ltable() and can replace it in most cases.
In reopen_tables() some of the tables open by a thread can be
closed and reopened. When a MERGE child is affected, the parent
must be closed and reopened too. Closing of the parent is forced
before the first child is closed. Reopen happens in the order of
thd->open_tables. MERGE parents do not attach their children
automatically at open. This is done after all tables are reopened.
So all children are open when attaching them.
Special lock handling like mysql_lock_abort() or mysql_lock_remove()
needs to be suppressed for MERGE children or forwarded to the parent.
This depends on the situation. In loops over all open tables one
suppresses child lock handling. When a single table is touched,
forwarding is done.
Behavioral changes:
===================
This patch changes the behavior of temporary MERGE tables.
Temporary MERGE must have temporary children.
The old behavior was wrong. A temporary table is not locked. Hence
even non-temporary children were not locked. See
Bug 19627 - temporary merge table locking.
You cannot change the union list of a non-temporary MERGE table
when LOCK TABLES is in effect. The following does *not* work:
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ...;
LOCK TABLES t1 WRITE, t2 WRITE, m1 WRITE;
ALTER TABLE m1 ... UNION=(t1,t2) ...;
However, you can do this with a temporary MERGE table.
You cannot create a MERGE table with CREATE ... SELECT, neither
as a temporary MERGE table, nor as a non-temporary MERGE table.
CREATE TABLE m1 ... ENGINE=MRG_MYISAM ... SELECT ...;
Gives error message: table is not BASE TABLE.
Faster thr_alarm()
Added 'Opened_files' status variable to track calls to my_open()
Don't give warnings when running mysql_install_db
Added option --source-install to mysql_install_db
I had to do the following renames() as used polymorphism didn't work with Forte compiler on 64 bit systems
index_read() -> index_read_map()
index_read_idx() -> index_read_idx_map()
index_read_last() -> index_read_last_map()
Additional changes for bug#29903
- Changed to do embedded build part as normal build, when
WITH_EMBEDDED_SERVER is set.
- Allow both normal and debug build with embedded.
- Build static embedded library by pointing out all source and compile
it all, i.e. not building libraries from libraries, not portable.
- Let embedded use generated files from the "sql" directory, added
dependencies to make sure built before embedded.
- Mark library "dbug" in TARGET_LINK_LIBRARIES() with "debug", so only
linked in when debug target is used.
- Removed change of target name with "mysqld${MYSQLD_EXE_SUFFIX}", as
others can't depend on it, not defined at configure time. Instead
set the output file name.
- Created work around for bug in CMake 2.4.6 and output names, to
set the "mysqld<suffix>.pdb" name to the same base name.
- Set the correct manifest "name" (patch by iggy)
They had been introduced in 5.1 and were only later backported to 5.0;
as a consequence, the files in the 5.1 tree do not depend on the 5.0 ones,
and changes in 5.0 do not propagate into the 5.1 files.
To fix this, the (previous) files in 5.1 now are deleted ("bk rm"),
and the previously deleted files depending on 5.0 are now moved to the
respective source directories ("bk mv").
The current 5.1 contents is restored in these files.
If you need the previous history of the 5.1 files ("bk revtool"),
access those in "BitKeeper/deleted".
Contrary to the original plan, I did not introduce the name
"CMakeLists.historic" - mostly in order not to clutter the source tree.
This fixes bug#29982.
Bug#25422 (Hang with log tables)
Bug 17876 (Truncating mysql.slow_log in a SP after using cursor locks the
thread)
Bug 23044 (Warnings on flush of a log table)
Bug 29129 (Resetting general_log while the GLOBAL READ LOCK is set causes
a deadlock)
Prior to this fix, the server would hang when performing concurrent
ALTER TABLE or TRUNCATE TABLE statements against the LOG TABLES,
which are mysql.general_log and mysql.slow_log.
The root cause traces to the following code:
in sql_base.cc, open_table()
if (table->in_use != thd)
{
/* wait_for_condition will unlock LOCK_open for us */
wait_for_condition(thd, &LOCK_open, &COND_refresh);
}
The problem with this code is that the current implementation of the
LOGGER creates 'fake' THD objects, like
- Log_to_csv_event_handler::general_log_thd
- Log_to_csv_event_handler::slow_log_thd
which are not associated to a real thread running in the server,
so that waiting for these non-existing threads to release table locks
cause the dead lock.
In general, the design of Log_to_csv_event_handler does not fit into the
general architecture of the server, so that the concept of general_log_thd
and slow_log_thd has to be abandoned:
- this implementation does not work with table locking
- it will not work with commands like SHOW PROCESSLIST
- having the log tables always opened does not integrate well with DDL
operations / FLUSH TABLES / SET GLOBAL READ_ONLY
With this patch, the fundamental design of the LOGGER has been changed to:
- always open and close a log table when writing a log
- remove totally the usage of fake THD objects
- clarify how locking of log tables is implemented in general.
See WL#3984 for details related to the new locking design.
Additional changes (misc bugs exposed and fixed):
1)
mysqldump which would ignore some tables in dump_all_tables_in_db(),
but forget to ignore the same in dump_all_views_in_db().
2)
mysqldump would also issue an empty "LOCK TABLE" command when all the tables
to lock are to be ignored (numrows == 0), instead of not issuing the query.
3)
Internal errors handlers could intercept errors but not warnings
(see sql_error.cc).
4)
Implementing a nested call to open tables, for the performance schema tables,
exposed an existing bug in remove_table_from_cache(), which would perform:
in_use->some_tables_deleted=1;
against another thread, without any consideration about thread locking.
This call inside remove_table_from_cache() was not required anyway,
since calling mysql_lock_abort() takes care of aborting -- cleanly -- threads
that might hold a lock on a table.
This line (in_use->some_tables_deleted=1) has been removed.
