allow only three failed change_user per connection.
successful change_user do NOT reset the counter
tests/mysql_client_test.c:
make --error to work for --change_user errors
PROBLEM:
Threads end-up in deadlock due to locks acquired as described
below,
con1: Run Query on a table.
It is important that this SELECT must back-off while
trying to open the t1 and enter into wait_for_condition().
The SELECT then is blocked trying to lock mysys_var->mutex
which is held by con3. The very significant fact here is
that mysys_var->current_mutex will still point to LOCK_open,
even if LOCK_open is no longer held by con1 at this point.
con2: Try dropping table used in con1 or query some table.
It will hold LOCK_open and be blocked trying to lock
kernel_mutex held by con4.
con3: Try killing the query run by con1.
It will hold THD::LOCK_thd_data belonging to con1 while
trying to lock mysys_var->current_mutex belonging to con1.
But current_mutex will point to LOCK_open which is held
by con2.
con4: Get innodb engine status
It will hold kernel_mutex, trying to lock THD::LOCK_thd_data
belonging to con1 which is held by con3.
So while technically only con2, con3 and con4 participate in the
deadlock, con1's mysys_var->current_mutex pointing to LOCK_open
is a vital component of the deadlock.
CYCLE = (THD::LOCK_thd_data -> LOCK_open ->
kernel_mutex -> THD::LOCK_thd_data)
FIX:
LOCK_thd_data has responsibility of protecting,
1) thd->query, thd->query_length
2) VIO
3) thd->mysys_var (used by KILL statement and shutdown)
4) THD during thread delete.
Among above responsibilities, 1), 2)and (3,4) seems to be three
independent group of responsibility. If there is different LOCK
owning responsibility of (3,4), the above mentioned deadlock cycle
can be avoid. This fix introduces LOCK_thd_kill to handle
responsibility (3,4), which eliminates the deadlock issue.
Note: The problem is not found in 5.5. Introduction MDL subsystem
caused metadata locking responsibility to be moved from TDC/TC to
MDL subsystem. Due to this, responsibility of LOCK_open is reduced.
As the use of LOCK_open is removed in open_table() and
mysql_rm_table() the above mentioned CYCLE does not form.
Revision ID for changes,
open_table() = dlenev@mysql.com-20100727133458-m3ua9oslnx8fbbvz
mysql_rm_table() = jon.hauglid@oracle.com-20101116100012-kxep9txz2fxy3nmw
BUG#11761686 insert_id event is not filtered.
Two issues are covered.
INSERT into autoincrement field which is not the first part in the composed primary key
is unsafe by autoincrement logging design. The case is specific to MyISAM engine
because Innodb does not allow such table definition.
However no warnings and row-format logging in the MIXED mode was done, and
that is fixed.
Int-, Rand-, User-var log-events were not filtered along with their parent
query that made possible them to screw up execution context of the following
query.
Fixed with deferring their execution until the parent query.
******
Bug#11754117
Post review fixes.
mysql-test/suite/rpl/r/rpl_auto_increment_bug45679.result:
a new result file is added.
mysql-test/suite/rpl/r/rpl_filter_tables_not_exist.result:
results updated.
mysql-test/suite/rpl/t/rpl_auto_increment_bug45679.test:
regression test for BUG#11754117-45670 is added.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
regression test for filtering issue of BUG#11754117 - 45670 is added.
sql/log_event.cc:
Logics are added for deferring and executing events associated
with the Query event.
sql/log_event.h:
Interface to deferred events batch execution is added.
sql/rpl_rli.cc:
initialization for new RLI members is added.
sql/rpl_rli.h:
New members to RLI are added to facilitate deferred events gathering
and execution control;
two general character RLI cleanup methods are constructed.
sql/rpl_utility.cc:
Deferred_log_events methods are difined.
sql/rpl_utility.h:
A new class Deferred_log_events is defined to implement
IRU events gathering, execution and cleanup.
sql/slave.cc:
Necessary changes to initialize `rli->deferred_events' and prevent
deferred event deletion in the main read-exec branch.
sql/sql_base.cc:
A new safe-check function for multi-part pk with auto-increment is defined
and deployed in lock_tables().
sql/sql_class.cc:
Initialization for a new member and replication cleanups are added
to THD class.
sql/sql_class.h:
THD class receives a new member to hold a specific execution
context for slave applier.
sql/sql_parse.cc:
Execution of the deferred event in started prior to its parent query.
Currently SHOW MASTER LOGS and SHOW BINARY LOGS require the SUPER
privilege. Monitoring tools (such as MEM) often want to check this
output - for instance MEM generates the SUM of the sizes of the logs
reported here, and puts that in the Replication overview within the MEM
Dashboard.
However, because of the SUPER requirement, these tools often have an
account that holds open the connection whilst monitoring, and can lock
out administrators when the server gets overloaded and reaches
max_connections - there is already another SUPER privileged account
connected, the "monitor".
As SHOW MASTER STATUS, and all other replication related statements,
return with either REPLICATION CLIENT or SUPER privileges, this worklog
is to make SHOW MASTER LOGS and SHOW BINARY LOGS be consistent with this
as well, and allow both of these commands with either SUPER or
REPLICATION CLIENT.
This allows monitoring tools to not require a SUPER privilege any more,
so is safer in overloaded situations, as well as being more secure, as
lighter privileges can be given to users of such tools or scripts.
If a query's end time is before before its start time, the system clock has been turn back
(daylight savings time etc.). When the system clock is changed, we can't tell for certain a
given query was actually slow. We did not protect against logging such a query with a bogus
execution time (resulting from end_time - start_time being negative), and possibly logging it
even though it did not really take long to run.
We now have a sanity check in place.
sql/sql_parse.cc:
Make sure end time is not before start time - otherwise, we can be SURE the system clock
was changed in between, but not by how much. In other words, when the clock is changed,
we don't know how long a query ran, and whether it was slow.
A buffer large enough to hold the query _plus_ some additional
data is allocated before parsing is started. The additional data
is used by the query cache, and consists of the name of the current
database and a set of flags.
When a packet containing multiple SQL statements is sent to the
server and one of the statements changes the current database
(a "USE <db>" statement), and the name of the new current database
is longer than of the previous, there is not enough space in the
buffer for the new name, and we write out over the buffer boundary.
The fix adds an extra field to store the number of bytes
allocated to the database name in the buffer. If the current
database name changes, and the new name is longer than the
previous one, we refuse to cache the query.
Cleanup: Changed procedure type from a int/char to an enum for easier to manage and debug code.
mysql-test/r/trigger.result:
Test that mysql.proc is not used as part of creating or using a trigger.
mysql-test/t/trigger.test:
Test that mysql.proc is not used as part of creating or using a trigger.
sql/sp.cc:
The main bug fix is to not look up triggers in mysql.proc; This is done by ignoreing type == TYPE_ENUM_TRIGGER in sp_add_used_routine()
Cleanup: Changed procedure type from a int/char to an enum.
sql/sp.h:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sp_head.h:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sql_db.cc:
Fix include order
sql/sql_lex.cc:
Fix include order
sql/sql_parse.cc:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sql_show.cc:
Fix include order
sql/sql_view.cc:
Fix include order
The main problem was that lex_start() was forgotten to be called before processing
COM_REFRESH.
Another problem discovered was that if failures to flush the error log were not properly
handled, which resulted in the server crash.
The user-visible effect of these problems were:
- if COM_REFRESH command was sent after SQL-queries of some sort,
the server would crash.
- if COM_REFRESH was requested with REFRESH_LOG only, and the error log
failed to flush, the server would crash. The error log fails to flush
when it points to unavailable file (for example, due to restricted
permissions).
The fixes are:
- call lex_start() in the beginning of COM_REFRESH;
- handle failures to flush the error log properly, i.e. raise ER_UNKNOWN_ERROR.
sql/sql_parse.cc:
Fix for Bug#13001491: MYSQL_REFRESH CRASHES WHEN STORED ROUTINES ARE RUN CONCURRENTLY.
tests/mysql_client_test.c:
A test case for Bug#13001491: MYSQL_REFRESH CRASHES WHEN STORED ROUTINES
ARE RUN CONCURRENTLY.
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
thd->user_connect is now handled in thd->clenup() which will ensure that it works in all context (including slaves).
I added also some DBUG_ASSERT() to ensure that things are working correctly.
sql/sql_acl.cc:
Reset thd->user_connect on failed check_for_max_user_connections() to ensure we don't decrement value twice.
Removed not needed call to decrease_user_connections() as thd->cleanup() will now do it.
sql/sql_class.cc:
Call decrease_user_connections() in thd->cleanup()
sql/sql_connect.cc:
Ensure we don't allocate thd->user_connect twice.
Simplify check_for_max_user_connections().
sql/sql_parse.cc:
Ensure that thd->user_connect is handled properly in for 'change_user' command.
There are 2 volatile condition constructions AND/OR constructions and fields(references) when first
good supported to be top elements of conditions because it is normal practice
(see copy_andor_structure for example) fields without any expression in the condition is really rare
and mostly useless case however it could lead to problems when optimiser changes/moves them unaware
of other variables referring to them. An easy solution of this problem is just to replace single field
in a condition with equivalent expression well supported by the server (<field> -> <field> != 0).
mysql-test/r/view.result:
New test added.
mysql-test/t/view.test:
New test added.
sql/sql_parse.cc:
<field> -> <field> != 0
sql/sql_yacc.yy:
<field> -> <field> != 0
When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.
We now defer working out the default engine till execution of
CREATE TABLE.
mysql-test/r/sp_trans.result:
results!
mysql-test/t/sp_trans.test:
Show that CREATE TABLE (called from store routine) heeds
any changes after CREATE SP / parse-time. Show that explicitly
requesting an ENGINE still works.
sql/sql_parse.cc:
If no ENGINE=... was given at parse-time, determine default
engine at execution time of CREATE TABLE.
sql/sql_yacc.yy:
If CREATE TABLE is not given ENGINE=..., don't bother
figuring out the default engine during parsing; we'll
do it at execution time instead to be aware of the
latest updates.
Noted that there was no memory leak, just a lot of used partitioned tables.
Fixed old bug: 'show status' now shows memory usage when compiled with safemalloc.
Added option --flush to mysqlcheck.c to run a 'flush tables' between each check to keep down memory usage.
Changed '--safemalloc' options to mysqld so that one can use --safemalloc and --skip-safemalloc.
Now skip-safemalloc is default (ie, we only do checking of memory overrun during free()) to speed up tests.
client/client_priv.h:
Added OPT_FLUSH_TABLES
client/mysqlcheck.c:
Added option --flush to mysqlcheck.c to run a 'flush tables' between each check to keep down memory usage.
mysql-test/mysql-test-run.pl:
Always run tests with --loose-skip-safemysqld for higher speed
sql/mysqld.cc:
Changed '--safemalloc' options so that one can use --safemalloc and --skip-safemalloc.
Now skip-safemalloc is default (ie, we only do checking of memory overrun during free()) to speed up tests
sql/sql_parse.cc:
Fixed old bug: 'show status' now shows memory usage when compiled with safemalloc.
storage/archive/archive_reader.c:
Changed all malloc() calls to use my_malloc()/my_free()
Added checks of malloc() calls.
storage/archive/ha_archive.cc:
Detect failure if init_archive_reader() and return errno. This fixed assert crash in my_seek().
Changed all malloc() calls to use my_malloc()/my_free()
SYNTAX TRIGGERS IN ANY WAY
Table with triggers which were using deprecated (5.0-only) syntax became
unavailable for any DML and DDL after upgrade to 5.1 version of server.
Attempt to execute any statement on such a table resulted in parsing
error reported. Since this included DROP TRIGGER and DROP TABLE
statements (actually, the latter was allowed but was not functioning
properly for such tables) it was impossible to fix the problem without
manual operations on .TRG and .TRN files in data directory.
The problem was that failure to parse trigger body (due to 5.0-only
syntax) when opening trigger file for a table prevented the table
from being open. This made all operations on the table impossible
(except DROP TABLE which due to peculiarity in its implementation
dropped the table but left trigger files around).
This patch solves this problem by silencing error which occurs when
we parse trigger body during table open. Error message is preserved
for the future use and table is marked as having a broken trigger.
We also try to analyze parse tree to recover trigger name, which
will be needed in order to drop the broken trigger. DML statements
which invoke triggers on the table marked as having broken trigger
are prohibited and emit saved error message. The same happens for
DDL which change triggers except DROP TRIGGER and DROP TABLE which
try their best to do what was requested. Table becomes no longer
marked as having broken trigger when last such trigger is dropped.
mysql-test/r/trigger-compat.result:
Add results for test case for bug#45235
mysql-test/t/trigger-compat.test:
Add test case for bug#45235.
sql/sp_head.cc:
Added protection against MEM_ROOT double restoring to
sp_head::restore_thd_mem_root() method. Since this
method can be sometimes called twice during parsing
of stored routine (the first time during normal flow
of parsing, and the second time when a syntax error
is detected) we need to shortcut execution of the
method to avoid damaging MEM_ROOT by the second
consecutive call to this method.
sql/sql_trigger.cc:
Added error handler Deprecated_trigger_syntax_handler to
catch non-OOM errors during parsing of trigger body.
Added handling of parse errors into method
Table_triggers_list::check_n_load().
sql/sql_trigger.h:
Added new members to handle broken triggers and error messages.
In sql_class.cc, 'row_count', of type 'ha_rows', was used as last argument for
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD which is
"Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld".
So 'ha_rows' was used as 'long'.
On SPARC32 Solaris builds, 'long' is 4 bytes and 'ha_rows' is 'longlong' i.e. 8 bytes.
So the printf-like code was reading only the first 4 bytes.
Because the CPU is big-endian, 1LL is 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01
so the first four bytes yield 0. So the warning message had "row 0" instead of
"row 1" in test outfile_loaddata.test:
-Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 1
+Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 0
All error-messaging functions which internally invoke some printf-life function
are potential candidate for such mistakes.
One apparently easy way to catch such mistakes is to use
ATTRIBUTE_FORMAT (from my_attribute.h).
But this works only when call site has both:
a) the format as a string literal
b) the types of arguments.
So:
func(ER(ER_BLAH), 10);
will silently not be checked, because ER(ER_BLAH) is not known at
compile time (it is known at run-time, and depends on the chosen
language).
And
func("%s", a va_list argument);
has the same problem, as the *real* type of arguments is not
known at this site at compile time (it's known in some caller).
Moreover,
func(ER(ER_BLAH));
though possibly correct (if ER(ER_BLAH) has no '%' markers), will not
compile (gcc says "error: format not a string literal and no format
arguments").
Consequences:
1) ATTRIBUTE_FORMAT is here added only to functions which in practice
take "string literal" formats: "my_error_reporter" and "print_admin_msg".
2) it cannot be added to the other functions: my_error(),
push_warning_printf(), Table_check_intact::report_error(),
general_log_print().
To do a one-time check of functions listed in (2), the following
"static code analysis" has been done:
1) replace
my_error(ER_xxx, arguments for substitution in format)
with the equivalent
my_printf_error(ER_xxx,ER(ER_xxx), arguments for substitution in
format),
so that we have ER(ER_xxx) and the arguments *in the same call site*
2) add ATTRIBUTE_FORMAT to push_warning_printf(),
Table_check_intact::report_error(), general_log_print()
3) replace ER(xxx) with the hard-coded English text found in
errmsg.txt (like: ER(ER_UNKNOWN_ERROR) is replaced with
"Unknown error"), so that a call site has the format as string literal
4) this way, ATTRIBUTE_FORMAT can effectively do its job
5) compile, fix errors detected by ATTRIBUTE_FORMAT
6) revert steps 1-2-3.
The present patch has no compiler error when submitted again to the
static code analysis above.
It cannot catch all problems though: see Field::set_warning(), in
which a call to push_warning_printf() has a variable error
(thus, not replacable by a string literal); I checked set_warning() calls
by hand though.
See also WL 5883 for one proposal to avoid such bugs from appearing
again in the future.
The issues fixed in the patch are:
a) mismatch in types (like 'int' passed to '%ld')
b) more arguments passed than specified in the format.
This patch resolves mismatches by changing the type/number of arguments,
not by changing error messages of sql/share/errmsg.txt. The latter would be wrong,
per the following old rule: errmsg.txt must be as stable as possible; no insertions
or deletions of messages, no changes of type or number of printf-like format specifiers,
are allowed, as long as the change impacts a message already released in a GA version.
If this rule is not followed:
- Connectors, which use error message numbers, will be confused (by insertions/deletions
of messages)
- using errmsg.sys of MySQL 5.1.n with mysqld of MySQL 5.1.(n+1)
could produce wrong messages or crash; such usage can easily happen if
installing 5.1.(n+1) while /etc/my.cnf still has --language=/path/to/5.1.n/xxx;
or if copying mysqld from 5.1.(n+1) into a 5.1.n installation.
When fixing b), I have verified that the superfluous arguments were not used in the format
in the first 5.1 GA (5.1.30 'bteam@astra04-20081114162938-z8mctjp6st27uobm').
Had they been used, then passing them today, even if the message doesn't use them
anymore, would have been necessary, as explained above.
include/my_getopt.h:
this function pointer is used only with "string literal" formats, so we can add
ATTRIBUTE_FORMAT.
mysql-test/collections/default.experimental:
test should pass now
sql/derror.cc:
by having a format as string literal, ATTRIBUTE_FORMAT check becomes effective.
sql/events.cc:
Change justified by the following excerpt from sql/share/errmsg.txt:
ER_EVENT_SAME_NAME
eng "Same old and new event name"
ER_EVENT_SET_VAR_ERROR
eng "Error during starting/stopping of the scheduler. Error code %u"
sql/field.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_DISPLAYWIDTH 42000 S1009
eng "Display width out of range for column '%-.192s' (max = %lu)"
sql/ha_ndbcluster.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/ha_ndbcluster_binlog.cc:
Too many arguments for:
ER_GET_ERRMSG
eng "Got error %d '%-.100s' from %s"
Patch by Jonas Oreland.
sql/ha_partition.cc:
print_admin_msg() is used only with a literal as format, so ATTRIBUTE_FORMAT
works.
sql/handler.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/item_create.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
'c_len' and 'c_dec' are char*, passed as %d !! We don't know their value
(as strtoul() failed), but they are likely big, so we use INT_MAX.
'len' is ulong.
sql/item_func.cc:
ER_WARN_DATA_OUT_OF_RANGE 22003
eng "Out of range value for column '%s' at row %ld"
ER_CANT_FIND_UDF
eng "Can't load function '%-.192s'"
sql/item_strfunc.cc:
ER_TOO_BIG_FOR_UNCOMPRESS
eng "Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)"
max_allowed_packet is ulong.
sql/mysql_priv.h:
sql_print_message_func is a function _pointer_.
sql/sp_head.cc:
ER_SP_RECURSION_LIMIT
eng "Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %.192s"
max_sp_recursion_depth is ulong
sql/sql_acl.cc:
ER_PASSWORD_NO_MATCH 42000
eng "Can't find any matching row in the user table"
ER_CANT_CREATE_USER_WITH_GRANT 42000
eng "You are not allowed to create a user with GRANT"
sql/sql_base.cc:
ER_NOT_KEYFILE
eng "Incorrect key file for table '%-.200s'; try to repair it"
ER_TOO_MANY_TABLES
eng "Too many tables; MySQL can only use %d tables in a join"
MAX_TABLES is size_t.
sql/sql_binlog.cc:
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_class.cc:
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD
eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld"
WARN_DATA_TRUNCATED 01000
eng "Data truncated for column '%s' at row %ld"
sql/sql_connect.cc:
ER_HANDSHAKE_ERROR 08S01
eng "Bad handshake"
ER_BAD_HOST_ERROR 08S01
eng "Can't get hostname for your address"
sql/sql_insert.cc:
ER_WRONG_VALUE_COUNT_ON_ROW 21S01
eng "Column count doesn't match value count at row %ld"
sql/sql_parse.cc:
ER_WARN_HOSTNAME_WONT_WORK
eng "MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work"
ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT
eng "Too high level of nesting for select"
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_partition.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_plugin.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_prepare.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
ER_UNKNOWN_STMT_HANDLER
eng "Unknown prepared statement handler (%.*s) given to %s"
length value (for '%.*s') must be 'int', per the doc of printf()
and the code of my_vsnprintf().
sql/sql_show.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_table.cc:
ER_TOO_BIG_FIELDLENGTH 42000 S1009
eng "Column length too big for column '%-.192s' (max = %lu); use BLOB or TEXT instead"
sql/table.cc:
ER_NOT_FORM_FILE
eng "Incorrect information in file: '%-.200s'"
ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE
eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error."
table->s->mysql_version is ulong.
sql/unireg.cc:
ER_TOO_LONG_TABLE_COMMENT
eng "Comment for table '%-.64s' is too long (max = %lu)"
ER_TOO_LONG_FIELD_COMMENT
eng "Comment for field '%-.64s' is too long (max = %lu)"
ER_TOO_BIG_ROWSIZE 42000
eng "Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"
Bug#11765108 - Bug#58036: CLIENT UTF32, UTF16, UCS2 SHOULD BE DISALLOWED, THEY CRASH SERVER
Fixing wrong usage of DBUG_ASSERT.
In non-debug version thd_init_client_charset
was not executed at all.
Changed some String.ptr() -> String.c_ptr() for String that are not guaranteed to end with \0
Removed some c_ptr() usage from parameters to functions that takes ptr & length
Use preallocate buffers to avoid calling malloc() for most operations.
sql/event_db_repository.cc:
alias is now a String
sql/event_scheduler.cc:
c_ptr -> c_ptr_safe() to avoid warnings from valgrind.
sql/events.cc:
c_ptr -> c_ptr_safe() to avoid warnings from valgrind.
c_ptr -> ptr() as function takes ptr & length
sql/field.cc:
alias is now a String
sql/field.h:
alias is now a String
sql/ha_partition.cc:
alias is now a String
sql/handler.cc:
alias is now a String
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/item.cc:
Store error parameter in separarte buffer to ensure correct error message
sql/item_func.cc:
ptr() -> c_ptr_safe() as string is not guaranteed to be \0 terminated
sql/item_sum.h:
Use my_strtod() instead of my_atof() to not have to make string \0 terminated
sql/lock.cc:
alias is now a String
sql/log.cc:
c_ptr() -> ptr() as function takes ptr & length
sql/log_event.cc:
c_ptr_quick() -> ptr() as we only want to get the pointer to String buffer
sql/opt_range.cc:
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/opt_table_elimination.cc:
alias is now a String
sql/set_var.cc:
ptr() -> c_ptr() as string is not guaranteed to be \0 terminated
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
c_ptr() -> ptr() as function takes ptr & length
Simplify some code.
sql/sp.cc:
c_ptr() -> ptr() as function takes ptr & length
sql/sp_rcontext.cc:
alias is now a String
sql/sql_base.cc:
alias is now a String.
Here we win a realloc() for most alias usage.
sql/sql_class.cc:
Use size descriptor for printf() to avoid accessing bytes outside of buffer
sql/sql_insert.cc:
Change allocation of TABLE as it's now contains a String
_ptr() -> ptr() as function takes ptr & length
sql/sql_load.cc:
Use preallocate buffers to avoid calling malloc() for most operations.
sql/sql_parse.cc:
Use c_ptr_safe() to ensure string is \0 terminated.
sql/sql_plugin.cc:
c_ptr_quick() -> ptr() as function takes ptr & length
sql/sql_select.cc:
alias is now a String
sql/sql_show.cc:
alias is now a String
sql/sql_string.h:
Added move() function to change who owns the string (owner does the free)
sql/sql_table.cc:
alias is now a String
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
sql/sql_test.cc:
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
alias is now a String
sql/sql_trigger.cc:
c_ptr() -> c_ptr_safe() to avoid warnings from valgrind.
Use field->init() to setup pointers to alias.
sql/sql_update.cc:
alias is now a String
sql/sql_view.cc:
ptr() -> c_ptr_safe() as string is not guaranteed to be \0 terminated
sql/sql_yacc.yy:
r() -> c_ptr() as string is not guaranteed to be \0 terminated
sql/table.cc:
alias is now a String
sql/table.h:
alias is now a String
storage/federatedx/ha_federatedx.cc:
Remove extra 1 byte alloc that is automaticly done by strmake()
Ensure that error message ends with \0
storage/maria/ha_maria.cc:
alias is now a String
storage/myisam/ha_myisam.cc:
alias is now a String
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
A separate fix for 5.1 (as 5.1 and 5.5 have seriously
differged in the related pieces of the code).
A patch for 5.5 was approved earlier.
Problem: ucs2 was correctly disallowed in "SET NAMES" only,
while mysql_real_connect() and mysql_change_user() still allowed
to use ucs2, which made server crash.
Fix: disallow ucs2 in mysql_real_connect() and mysql_change_user().
@ sql/sql_priv.h
- changing return type for thd_init_client_charset() to bool,
to return errors to the caller
@ sql/sql_var.cc
- using new function
@ sql/sql_connect.cc
- thd_client_charset_init:
in case of unsupported client character set send error and return true;
in case of success return false
- check_connection:
Return error if character set initialization failed
@ sql/sql_parse.cc
- check charset in the very beginnig of the CMD_CHANGE_USER handling code
@ tests/mysql_client_test.c
- adding tests
Backport to 5.0.
/*![:version:] Query Code */, where [:version:] is a sequence of 5
digits representing the mysql server version(e.g /*!50200 ... */),
is a special comment that the query in it can be executed on those
servers whose versions are larger than the version appearing in the
comment. It leads to a security issue when slave's version is larger
than master's. A malicious user can improve his privileges on slaves.
Because slave SQL thread is running with SUPER privileges, so it can
execute queries that he/she does not have privileges on master.
This bug is fixed with the logic below:
- To replace '!' with ' ' in the magic comments which are not applied on
master. So they become common comments and will not be applied on slave.
- Example:
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /*!99999 ,(3)*/
will be binlogged as
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /* 99999 ,(3)*/
The patch also fixes a race in rpl_stop_slave.test.
On machines with lots of CPU and memory, something like `mtr --parallel=10`
can speed up the test suite enormously. However, we have a few test cases
that run for long (several minutes), and if we are unlucky and happen to
schedule those towards the end of the test suite, we end up with most
workers idle while waiting for the last slow test to end, significantly
delaying the finish of the entire suite.
Improve this by marking the offending tests as taking "long", and trying
to schedule those tests early. This reduces the time towards the end of
the test suite run where some workers are waiting with nothing to do for
the remaining workers each to finish their last test.
Also, the rpl_stop_slave test had a race which could cause it to take
a 300 seconds debug_sync timeout; this is fixed.
Testing on a 4-core 8GB machine, this patch speeds up the test suite with
around 30% for --parallel=10 (debug build), allowing to run the entire
suite in 5 minutes.
- Removed files specific to compiling on OS/2
- Removed files specific to SCO Unix packaging
- Removed "libmysqld/copyright", text is included in documentation
- Removed LaTeX headers for NDB Doxygen documentation
- Removed obsolete NDB files
- Removed "mkisofs" binaries
- Removed the "cvs2cl.pl" script
- Changed a few GPL texts to use "program" instead of "library"
--Bug#52157 various crashes and assertions with multi-table update, stored function
--Bug#54475 improper error handling causes cascading crashing failures in innodb/ndb
--Bug#57703 create view cause Assertion failed: 0, file .\item_subselect.cc, line 846
--Bug#57352 valgrind warnings when creating view
--Recently discovered problem when a nested materialized derived table is used
before being populated and it leads to incorrect result
We have several modes when we should disable subquery evaluation.
The reasons for disabling are different. It could be
uselessness of the evaluation as in case of 'CREATE VIEW'
or 'PREPARE stmt', or we should disable subquery evaluation
if tables are not locked yet as it happens in bug#54475, or
too early evaluation of subqueries can lead to wrong result
as it happened in Bug#19077.
Main problem is that if subquery items are treated as const
they are evaluated in ::fix_fields(), ::fix_length_and_dec()
of the parental items as a lot of these methods have
Item::val_...() calls inside.
We have to make subqueries non-const to prevent unnecessary
subquery evaluation. At the moment we have different methods
for this. Here is a list of these modes:
1. PREPARE stmt;
We use UNCACHEABLE_PREPARE flag.
It is set during parsing in sql_parse.cc, mysql_new_select() for
each SELECT_LEX object and cleared at the end of PREPARE in
sql_prepare.cc, init_stmt_after_parse(). If this flag is set
subquery becomes non-const and evaluation does not happen.
2. CREATE|ALTER VIEW, SHOW CREATE VIEW, I_S tables which
process FRM files
We use LEX::view_prepare_mode field. We set it before
view preparation and check this flag in
::fix_fields(), ::fix_length_and_dec().
Some bugs are fixed using this approach,
some are not(Bug#57352, Bug#57703). The problem here is
that we have a lot of ::fix_fields(), ::fix_length_and_dec()
where we use Item::val_...() calls for const items.
3. Derived tables with subquery = wrong result(Bug19077)
The reason of this bug is too early subquery evaluation.
It was fixed by adding Item::with_subselect field
The check of this field in appropriate places prevents
const item evaluation if the item have subquery.
The fix for Bug19077 fixes only the problem with
convert_constant_item() function and does not cover
other places(::fix_fields(), ::fix_length_and_dec() again)
where subqueries could be evaluated.
Example:
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
SELECT * FROM (SELECT MIN(i) FROM t1
WHERE j = SUBSTRING('12', (SELECT * FROM (SELECT MIN(j) FROM t1) t2))) t3;
DROP TABLE t1;
4. Derived tables with subquery where subquery
is evaluated before table locking(Bug#54475, Bug#52157)
Suggested solution is following:
-Introduce new field LEX::context_analysis_only with the following
possible flags:
#define CONTEXT_ANALYSIS_ONLY_PREPARE 1
#define CONTEXT_ANALYSIS_ONLY_VIEW 2
#define CONTEXT_ANALYSIS_ONLY_DERIVED 4
-Set/clean these flags when we perform
context analysis operation
-Item_subselect::const_item() returns
result depending on LEX::context_analysis_only.
If context_analysis_only is set then we return
FALSE that means that subquery is non-const.
As all subquery types are wrapped by Item_subselect
it allow as to make subquery non-const when
it's necessary.
mysql-test/r/derived.result:
test case
mysql-test/r/multi_update.result:
test case
mysql-test/r/view.result:
test case
mysql-test/suite/innodb/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb/t/innodb_multi_update.test:
test case
mysql-test/suite/innodb_plugin/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb_plugin/t/innodb_multi_update.test:
test case
mysql-test/t/derived.test:
test case
mysql-test/t/multi_update.test:
test case
mysql-test/t/view.test:
test case
sql/item.cc:
--removed unnecessary code
sql/item_cmpfunc.cc:
--removed unnecessary checks
--THD::is_context_analysis_only() is replaced with LEX::is_ps_or_view_context_analysis()
sql/item_func.cc:
--refactored context analysis checks
sql/item_row.cc:
--removed unnecessary checks
sql/item_subselect.cc:
--removed unnecessary code
--added DBUG_ASSERT into Item_subselect::exec()
which asserts that subquery execution can not happen
if LEX::context_analysis_only is set, i.e. at context
analysis stage.
--Item_subselect::const_item()
Return FALSE if LEX::context_analysis_only is set.
It prevents subquery evaluation in ::fix_fields &
::fix_length_and_dec at context analysis stage.
sql/item_subselect.h:
--removed unnecessary code
sql/mysql_priv.h:
--Added new set of flags.
sql/sql_class.h:
--removed unnecessary code
sql/sql_derived.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_lex.cc:
--init LEX::context_analysis_only field
sql/sql_lex.h:
--New LEX::context_analysis_only field
sql/sql_parse.cc:
--removed unnecessary code
sql/sql_prepare.cc:
--removed unnecessary code
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_select.cc:
--refactored context analysis checks
sql/sql_show.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_view.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
when generating new name.
If find_uniq_filename returns an error, then this error is not
being propagated upwards, and execution does not report error to
the user (although a entry in the error log is generated).
Additionally, some more errors were ignored in new_file_impl:
- when writing the rotate event
- when reopening the index and binary log file
This patch addresses this by propagating the error up in the
execution stack. Furthermore, when rotation of the binary log
fails, an incident event is written, because there may be a
chance that some changes for a given statement, were not properly
logged. For example, in SBR, LOAD DATA INFILE statement requires
more than one event to be logged, should rotation fail while
logging part of the LOAD DATA events, then the logged data would
become inconsistent with the data in the storage engine.
mysql-test/include/restart_mysqld.inc:
Refactored restart_mysqld so that it is not hardcoded for
mysqld.1, but rather for the current server.
mysql-test/suite/binlog/t/binlog_index.test:
The error on open of index and binary log on new_file_impl
is now caught. Thence the user will get an error message.
We need to accomodate this change in the test case for the
failing FLUSH LOGS.
mysql-test/suite/rpl/t/rpl_binlog_errors-master.opt:
Sets max_binlog_size to 4096.
mysql-test/suite/rpl/t/rpl_binlog_errors.test:
Added some test cases for asserting that the error is found
and reported.
sql/handler.cc:
Catching error now returned by unlog (in ha_commit_trans) and
returning it.
sql/log.cc:
Propagating errors from new_file_impl upwards. The errors that
new_file_impl catches now are:
- error on generate_new_name
- error on writing the rotate event
- error when opening the index or the binary log file.
sql/log.h:
Changing declaration of:
- rotate_and_purge
- new_file
- new_file_without_locking
- new_file_impl
- unlog
They now return int instead of void.
sql/mysql_priv.h:
Change signature of reload_acl_and_cache so that write_to_binlog
is an int instead of bool.
sql/mysqld.cc:
Redeclaring not_used var as int instead of bool.
sql/rpl_injector.cc:
Changes to catch the return from rotate_and_purge.
sql/slave.cc:
Changes to catch the return values for new_file and rotate_relay_log.
sql/slave.h:
Changes to rotate_relay_log declaration (now returns int
instead of void).
sql/sql_load.cc:
In SBR, some logging of LOAD DATA events goes through
IO_CACHE_CALLBACK invocation at mf_iocache.c:_my_b_get. The
IO_CACHE implementation is ignoring the return value for from
these callbacks (pre_read and post_read), so we need to find out
at the end of the execution if the error is set or not in THD.
sql/sql_parse.cc:
Catching the rotate_relay_log and rotate_and_purge return values.
Semantic change in reload_acl_and_cache so that we report errors
in binlog interactions through the write_to_binlog output parameter.
If there was any failure while rotating the binary log, we should
then report the error to the client when handling SQLCOMM_FLUSH.
Open issues:
- A better fix for #57688; Igor is working on this
- Test failure in index_merge_innodb.test ; Igor promised to look at this
- Some Innodb tests fails (need to merge with latest xtradb) ; Kristian promised to look at this.
- Failing tests: innodb_plugin.innodb_bug56143 innodb_plugin.innodb_bug56632 innodb_plugin.innodb_bug56680 innodb_plugin.innodb_bug57255
- Werror is disabled; Should be enabled after merge with xtradb.
