------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
Bug #47304 Test main.mdl_sync fails on embedded server
The problem was that SHOW PROCESSLIST was trying to access
a thread that was not properly running and therefore had an
uninitialized mutex.
This patch explicitly resets thd->mysys_var after each embedded
server command to prevent the mutex from being accessed in an
illegal state.
The patch also re-enables lock_multi.test and mdl_sync.test for
embedded server as they had been disabled because of this bug.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
This patch provides performance improvements:
- send_fields() when character_set_results = latin1
is now about twice faster for column/table/database
names, consisting on ASCII characters.
Changes:
- Protocol doesn't use "convert" temporary buffer anymore,
and converts strings directly to "packet".
- General conversion optimization: quick conversion
of ASCII strings was added.
modified files:
include/m_ctype.h
- Adding a new flag.
- Adding a new function prototype
libmysqld/lib_sql.cc
- Adding quick conversion method for embedded library:
conversion is now done directly to result buffer,
without using a temporary buffer.
mysys/charset.c
- Mark all dynamic ucs2 character sets as non-ASCII
- Mark some dymamic 7bit and 8bit charsets as non-ASCII
(for example swe7 is not fully ASCII compatible).
sql/protocol.cc
- Adding quick method to convert a string directly
into protocol buffer, without using a temporary buffer.
sql/protocol.h
- Adding a new method prototype
sql/sql_string.cc
Optimization for conversion between two ASCII-compatible charsets:
- quickly convert ASCII strings,
switch to mc_wc->wc_mb method only when a non-ASCII character is met.
- copy four ASCII characters at once on i386
strings/conf_to_src.c
- Marking non-ASCII character sets with a flag.
strings/ctype-extra.c
- Regenerating ctype-extra.c by running "conf_to_src".
strings/ctype-uca.c
- Marking UCS2 character set as non-ASCII.
strings/ctype-ucs2.c
- Marking UCS2 character set as non-ASCII.
strings/ctype.c
- A new function to detect if a 7bit or 8bit character set
is ascii compatible.
an assertion in a debug build.
The reason is that the C API doesn't support multiple result sets for prepared
statements and attempting to execute a stored routine which returns multiple result
sets sometimes lead to a network error. The network error sets the diagnostic area
prematurely which later leads to the assert when an attempt is made to set a second
server state.
This patch fixes the issue by changing the scope of the error code returned by
sp_instr_stmt::execute() to include any error which happened during the execution.
To assure that Diagnostic_area::is_sent really mean that the message was sent all
network related functions are checked for return status.
the thread->mysys_var parameter should be empty for the idle
embedded-server threads so that working threads can safely free
this memory.
per-file comments:
libmysqld/lib_sql.cc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
set thread->mysys_var= 0 after the query is handled
mysql-test/include/concurrent.inc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
enable these for the embedded-server mode
sql/sql_show.cc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
show thread lock status in the query result
The problem here is that embedded server starts handle_thread manager
thread on mysql_library_init() does not stop it on mysql_library_end().
At shutdown, my_thread_global_end() waits for thread count to become 0,
but since we did not stop the thread it will give up after 5 seconds.
Solution is to move shutdown for handle_manager thread from kill_server()
(mysqld specific) to clean_up() that is used by both embedded and mysqld.
This patch also contains some refactorings - to avoid duplicate code,
start_handle_manager() and stop_handle_manager() functions are introduced.
Unused variables are eliminated. handle_manager does not rely on global
variable abort_loop anymore to stop (abort_loop is not set for embedded).
Note: Specifically on Windows and when using DBUG version of libmysqld,
the complete solution requires removing obsolete code my_thread_init()
from my_thread_var(). This has a side effect that a DBUG statement
after my_thread_end() can cause thread counter to be incremented, and
embedded will hang for some seconds. Or worse, my_thread_init() will
crash if critical sections have been deleted by the global cleanup
routine that runs in a different thread.
This patch also fixes and revert prior changes for Bug#38293
"Libmysqld crash in mysql_library_init if language file missing".
Root cause of the crash observed in Bug#38293 was bug in my_thread_init()
described above
GLOBAL STATUS is calculated by studying the list of threads. In the
embedded server threads were not linked to the internal list, so the
calculation always returns 0. Fixed by 'linking' the embedded-server
threads to the same list
per-file comments:
libmysqld/lib_sql.cc
Bug#34517 SHOW GLOBAL STATUS does not work properly in embedded server.
Add newly created 'threads' to the internal thread list.
Remove them from the list as they're freed.
mysql-test/r/information_schema.result
Bug#34517 SHOW GLOBAL STATUS does not work properly in embedded server.
test result
mysql-test/t/information_schema.test
Bug#34517 SHOW GLOBAL STATUS does not work properly in embedded server.
test case added
Several functions (mostly in mysqld.cc) directly call
exit() function in case of errors, which is not a desired
behaviour expecially in the embedded-server library.
Fixed by making these functions return error sign instead
of exiting.
per-file comments:
include/my_getopt.h
Bug#39289 libmysqld.a calls exit() upon error
added 'error' retvalue for my_getopt_register_get_addr
libmysqld/lib_sql.cc
Bug#39289 libmysqld.a calls exit() upon error
unireg_clear() function implemented
mysys/default.c
Bug#39289 libmysqld.a calls exit() upon error
error returned instead of exit() call
mysys/mf_tempdir.c
Bug#39289 libmysqld.a calls exit() upon error
free_tmpdir() - fixed so it's not produce crash on uninitialized
tmpdir structure
mysys/my_getopt.c
Bug#39289 libmysqld.a calls exit() upon error
error returned instead of exit() call
sql/mysql_priv.h
Bug#39289 libmysqld.a calls exit() upon error
unireg_abort definition fixed for the embedded server
sql/mysqld.cc
Bug#39289 libmysqld.a calls exit() upon error
various functions fixed
error returned instead of exit() call
partition is corrupt
Post push fix
an DBUG_ASSERT broke the embedded server, fixed by initializing
it in the embedded version of Protocol_text::prepare_for_resend
The problem was that when a embedded linked version of mysqltest
crashed there was no way to obtain a stack trace if no core file
is available. Another problem is that the embedded version of
libmysql was not behaving (crash) the same as the non-embedded with
respect to sending commands to a explicitly closed connection.
The solution is to generate a mysqltest's stack trace on crash
and to enable "reconnect" if the connection handle was explicitly
closed so the behavior matches the non-embedded one.
SHOW commands fail in embedded mode because schema_table array doesn't
correspond to enum_schema_tables.
This patch implements a dummy implementation of the abstract fill_table
function to be used when the event scheduler (or other core feature)
isn't part of the build.
If excluding Federated, make sure dynamic plugin is not built
Makefile.am:
Only run cluster test when compiled with cluster
lib_sql.cc:
Work around for Visual Studio 2003, that lacks vsnprintf() but has _vsnprintf()
Rename client_last_error to last_error and client_last_errno to last_errno
to not break connectors which use the internal net structure for error handling.
There was no way to return an error from the client library
if no MYSQL connections was established.
So here i added variables to store that king of errors and
made functions like mysql_error(NULL) to return these.
cause ROLLBACK of statement", part 1. Review fixes.
Do not send OK/EOF packets to the client until we reached the end of
the current statement.
This is a consolidation, to keep the functionality that is shared by all
SQL statements in one place in the server.
Currently this functionality includes:
- close_thread_tables()
- log_slow_statement().
After this patch and the subsequent patch for Bug#12713, it shall also include:
- ha_autocommit_or_rollback()
- net_end_statement()
- query_cache_end_of_result().
In future it may also include:
- mysql_reset_thd_for_next_command().
server status wasn't properly sent to the client after the error
by the embedded server. Wasn't noticed before as one usually stopped
retrieving results after he gets an error.
When mysql_server_init() interrupts on some error (wrong errmsg file
for example) in the middle of it's execution, it doesn't call
execute_ddl_log_recovery() so LOCK_gdl mutex isn't init-ed.
In this case we shouldn't execute release_ddl_log during cleanup
as it uses that mutex inside.
partitioned table
Post-pushbuild fix
Pushbuild detected a new need for lex initialization in
embedded server.
Fixed test for INSERT DELAYED in partitions_hash.test so that
it works with embedded server.
No functionality added or changed.
This is a pre-requisite for the fix for Bug#12713 Error in a stored
function called from a SELECT doesn't cause ROLLBACK of statem
Address post-review comments.
