replication causing replication to fail.
Remove the temporary fix for MDEV-5914, which used READ COMMITTED for parallel
replication worker threads. Replace it with a better, more selective solution.
The issue is with certain edge cases of InnoDB gap locks, for example between
INSERT and ranged DELETE. It is possible for the gap lock set by the DELETE to
block the INSERT, if the DELETE runs first, while the record lock set by
INSERT does not block the DELETE, if the INSERT runs first. This can cause a
conflict between the two in parallel replication on the slave even though they
ran without conflicts on the master.
With this patch, InnoDB will ask the server layer about the two involved
transactions before blocking on a gap lock. If the server layer tells InnoDB
that the transactions are already fixed wrt. commit order, as they are in
parallel replication, InnoDB will ignore the gap lock and allow the two
transactions to proceed in parallel, avoiding the conflict.
Improve the fix for MDEV-6020. When InnoDB itself detects a deadlock, it now
asks the server layer for any preferences about which transaction to roll
back. In case of parallel replication with two transactions T1 and T2 fixed to
commit T1 before T2, the server layer will ask InnoDB to roll back T2 as the
deadlock victim, not T1. This helps in some cases to avoid excessive deadlock
rollback, as T2 will in any case need to wait for T1 to complete before it can
itself commit.
Also some misc. fixes found during development and testing:
- Remove thd_rpl_is_parallel(), it is not used or needed.
- Use KILL_CONNECTION instead of KILL_QUERY when a parallel replication
worker thread is killed to resolve a deadlock with fixed commit
ordering. There are some cases, eg. in sql/sql_parse.cc, where a KILL_QUERY
can be ignored if the query otherwise completed successfully, and this
could cause the deadlock kill to be lost, so that the deadlock was not
correctly resolved.
- Fix random test failure due to missing wait_for_binlog_checkpoint.inc.
- Make sure that deadlock or other temporary errors during parallel
replication are not printed to the the error log; there were some places
around the replication code with extra error logging. These conditions can
occur occasionally and are handled automatically without breaking
replication, so they should not pollute the error log.
- Fix handling of rgi->gtid_sub_id. We need to be able to access this also at
the end of a transaction, to be able to detect and resolve deadlocks due to
commit ordering. But this value was also used as a flag to mark whether
record_gtid() had been called, by being set to zero, losing the value. Now,
introduce a separate flag rgi->gtid_pending, so rgi->gtid_sub_id remains
valid for the entire duration of the transaction.
- Fix one place where the code to handle ignored errors called reset_killed()
unconditionally, even if no error was caught that should be ignored. This
could cause loss of a deadlock kill signal, breaking deadlock detection and
resolution.
- Fix a couple of missing mysql_reset_thd_for_next_command(). This could
cause a prior error condition to remain for the next event executed,
causing assertions about errors already being set and possibly giving
incorrect error handling for following event executions.
- Fix code that cleared thd->rgi_slave in the parallel replication worker
threads after each event execution; this caused the deadlock detection and
handling code to not be able to correctly process the associated
transactions as belonging to replication worker threads.
- Remove useless error code in slave_background_kill_request().
- Fix bug where wfc->wakeup_error was not cleared at
wait_for_commit::unregister_wait_for_prior_commit(). This could cause the
error condition to wrongly propagate to a later wait_for_prior_commit(),
causing spurious ER_PRIOR_COMMIT_FAILED errors.
- Do not put the binlog background thread into the processlist. It causes
too many result differences in mtr, but also it probably is not useful
for users to pollute the process list with a system thread that does not
really perform any user-visible tasks...
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
SHOW PROCESSLIST, SHOW BINLOGS
Problem: A deadlock was occurring when 4 threads were
involved in acquiring locks in the following way
Thread 1: Dump thread ( Slave is reconnecting, so on
Master, a new dump thread is trying kill
zombie dump threads. It acquired thread's
LOCK_thd_data and it is about to acquire
mysys_var->current_mutex ( which LOCK_log)
Thread 2: Application thread is executing show binlogs and
acquired LOCK_log and it is about to acquire
LOCK_index.
Thread 3: Application thread is executing Purge binary logs
and acquired LOCK_index and it is about to
acquire LOCK_thread_count.
Thread 4: Application thread is executing show processlist
and acquired LOCK_thread_count and it is
about to acquire zombie dump thread's
LOCK_thd_data.
Deadlock Cycle:
Thread 1 -> Thread 2 -> Thread 3-> Thread 4 ->Thread 1
The same above deadlock was observed even when thread 4 is
executing 'SELECT * FROM information_schema.processlist' command and
acquired LOCK_thread_count and it is about to acquire zombie
dump thread's LOCK_thd_data.
Analysis:
There are four locks involved in the deadlock. LOCK_log,
LOCK_thread_count, LOCK_index and LOCK_thd_data.
LOCK_log, LOCK_thread_count, LOCK_index are global mutexes
where as LOCK_thd_data is local to a thread.
We can divide these four locks in two groups.
Group 1 consists of LOCK_log and LOCK_index and the order
should be LOCK_log followed by LOCK_index.
Group 2 consists of other two mutexes
LOCK_thread_count, LOCK_thd_data and the order should
be LOCK_thread_count followed by LOCK_thd_data.
Unfortunately, there is no specific predefined lock order defined
to follow in the MySQL system when it comes to locks across these
two groups. In the above problematic example,
there is no problem in the way we are acquiring the locks
if you see each thread individually.
But If you combine all 4 threads, they end up in a deadlock.
Fix:
Since everything seems to be fine in the way threads are taking locks,
In this patch We are changing the duration of the locks in Thread 4
to break the deadlock. i.e., before the patch, Thread 4
('show processlist' command) mysqld_list_processes()
function acquires LOCK_thread_count for the complete duration
of the function and it also acquires/releases
each thread's LOCK_thd_data.
LOCK_thread_count is used to protect addition and
deletion of threads in global threads list. While show
process list is looping through all the existing threads,
it will be a problem if a thread is exited but there is no problem
if a new thread is added to the system. Hence a new mutex is
introduced "LOCK_thd_remove" which will protect deletion
of a thread from global threads list. All threads which are
getting exited should acquire LOCK_thd_remove
followed by LOCK_thread_count. (It should take LOCK_thread_count
also because other places of the code still thinks that exit thread
is protected with LOCK_thread_count. In this fix, we are changing
only 'show process list' query logic )
(Eg: unlink_thd logic will be protected with
LOCK_thd_remove).
Logic of mysqld_list_processes(or file_schema_processlist)
will now be protected with 'LOCK_thd_remove' instead of
'LOCK_thread_count'.
Now the new locking order after this patch is:
LOCK_thd_remove -> LOCK_thd_data -> LOCK_log ->
LOCK_index -> LOCK_thread_count
The fill_schema_table() function used to call get_table_share() for a table name in WHERE
then clear the error list. That way plugins receive the superfluous error notification if it
happens in it. Also the problem was that error handler didn't prevent the suppressed
error message from logging anyway as the logging happens in THD::raise_condition
before the handler call.
Trigger_error_handler is remade into Warnings_only_error_handler, so it stores the error
message in all cases in the thd->stmt_da.
Then later the stored error is raised.
Due to how gap locks work, two transactions could group commit together on the
master, but get lock conflicts and then deadlock due to different thread
scheduling order on slave.
For now, remove these deadlocks by running the parallel slave in READ
COMMITTED mode. And let InnoDB/XtraDB allow statement-based binlogging for the
parallel slave in READ COMMITTED.
We are also investigating a different solution long-term, which is based on
relaxing the gap locks only between the transactions running in parallel for
one slave, but not against possibly external transactions.
Reason for the bug was an optimization for higher connect speed where we moved when global status was updated,
but forgot to update states when slave thread dies.
Fixed by adding thd->add_status_to_global() before deleting slave thread's thd.
mysys/my_delete.c:
Added missing newline
sql/mysqld.cc:
Use add_status_to_global()
sql/slave.cc:
Added missing add_status_to_global()
sql/sql_class.cc:
Use add_status_to_global()
sql/sql_class.h:
Simplify adding local status to global by adding add_status_to_global()
Clean up and improve the parallel implementation code, mainly related to
scheduling of work to threads and handling of stop and errors.
Fix a lot of bugs in various corner cases that could lead to crashes or
corruption.
Fix that a single replication domain could easily grab all worker threads and
stall all other domains; now a configuration variable
--slave-domain-parallel-threads allows to limit the number of
workers.
Allow next event group to start as soon as previous group begins the commit
phase (as opposed to when it ends it); this allows multiple event groups on
the slave to participate in group commit, even when no other opportunities for
parallelism are available.
Various fixes:
- Fix some races in the rpl.rpl_parallel test case.
- Fix an old incorrect assertion in Log_event iocache read.
- Fix repeated malloc/free of wait_for_commit and rpl_group_info objects.
- Simplify wait_for_commit wakeup logic.
- Fix one case in queue_for_group_commit() where killing one thread would
fail to correctly signal the error to the next, causing loss of the
transaction after slave restart.
- Fix leaking of pthreads (and their allocated stack) due to missing
PTHREAD_CREATE_DETACHED attribute.
- Fix how one batch of group-committed transactions wait for the previous
batch before starting to execute themselves. The old code had a very
complex scheduling where the first transaction was handled differently,
with subtle bugs in corner cases. Now each event group is always scheduled
for a new worker (in a round-robin fashion amongst available workers).
Keep a count of how many transactions have started to commit, and wait for
that counter to reach the appropriate value.
- Fix slave stop to wait for all workers to actually complete processing;
before, the wait was for update of last_committed_sub_id, which happens a
bit earlier, and could leave worker threads potentially accessing bits of
the replication state that is no longer valid after slave stop.
- Fix a couple of places where the test suite would kill a thread waiting
inside enter_cond() in connection with debug_sync; debug_sync + kill can
crash in rare cases due to a race with mysys_var_current_mutex in this
case.
- Fix some corner cases where we had enter_cond() but no exit_cond().
- Fix that we could get failure in wait_for_prior_commit() but forget to flag
the error with my_error().
- Fix slave stop (both for normal stop and stop due to error). Now, at stop
we pick a specific safe point (in terms of event groups executed) and make
sure that all event groups before that point are executed to completion,
and that no event group after start executing; this ensures a safe place to
restart replication, even for non-transactional stuff/DDL. In error stop,
make sure that all prior event groups are allowed to execute to completion,
and that any later event groups that have started are rolled back, if
possible. The old code could leave eg. T1 and T3 committed but T2 not, or
it could even leave half a transaction not rolled back in some random
worker, which would cause big problems when that worker was later reused
after slave restart.
- Fix the accounting of amount of events queued for one worker. Before, the
amount was reduced immediately as soon as the events were dequeued (which
happens all at once); this allowed twice the amount of events to be queued
in memory for each single worker, which is not what users would expect.
- Fix that an error set during execution of one event was sometimes not
cleared before executing the next, causing problems with the error
reporting.
- Fix incorrect handling of thd->killed in worker threads.
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
MDEV-4984: Implement MASTER_GTID_WAIT() and @@LAST_GTID.
MDEV-4726: Race in mysql-test/suite/rpl/t/rpl_gtid_stop_start.test
MDEV-5636: Deadlock in RESET MASTER
MASTER_GTID_WAIT() is similar to MASTER_POS_WAIT(), but works with a
GTID position rather than an old-style filename/offset.
@@LAST_GTID gives the GTID assigned to the last transaction written
into the binlog.
Together, the two can be used by applications to obtain the GTID of
an update on the master, and then do a MASTER_GTID_WAIT() for that
position on any read slave where it is important to get results that
are caught up with the master at least to the point of the update.
The implementation of MASTER_GTID_WAIT() is implemented in a way
that tries to minimise the performance impact on the SQL threads,
even in the presense of many waiters on single GTID positions (as
from @@LAST_GTID).
- CREATE TABLE is by default executed on the slave as CREATE OR REPLACE
- DROP TABLE is by default executed on the slave as DROP TABLE IF NOT EXISTS
This means that a slave will by default continue even if we try to create
a table that existed on the slave (the table will be deleted and re-created) or
if we try to drop a table that didn't exist on the slave.
This should be safe as instead of having the slave stop because of an inconsistency between
master and slave, it will fix the inconsistency.
Those that would prefer to get a stopped slave instead for the above cases can set slave_ddl_exec_mode to STRICT.
- Ensure that a CREATE OR REPLACE TABLE which dropped a table is replicated
- DROP TABLE that generated an error on master is handled as an identical DROP TABLE on the slave (IF NOT EXISTS is not added in this case)
- Added slave_ddl_exec_mode variable to decide how DDL's are replicated
New logic for handling BEGIN GTID ... COMMIT from the binary log:
- When we find a BEGIN GTID, we start a transaction and set OPTION_GTID_BEGIN
- When we find COMMIT, we reset OPTION_GTID_BEGIN and execute the normal COMMIT code.
- While OPTION_GTID_BEGIN is set:
- We don't generate implict commits before or after statements
- All tables are regarded as transactional tables in the binary log (to ensure things are executed exactly as on the master)
- We reset OPTION_GTID_BEGIN also on rollback
This will help ensuring that we don't get any sporadic commits (and thus new GTID's) on the slave and will help keep the GTID's between master and slave in sync.
mysql-test/extra/rpl_tests/rpl_log.test:
Added testing of mode slave_ddl_exec_mode=STRICT
mysql-test/r/mysqld--help.result:
New help messages
mysql-test/suite/rpl/r/create_or_replace_mix.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_row.result:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/r/create_or_replace_statement.result:
Testing replication of create or replace
mysql-test/suite/rpl/r/rpl_gtid_startpos.result:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/r/rpl_row_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Updated result
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_log.result:
Updated result
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated result
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result
mysql-test/suite/rpl/t/create_or_replace.inc:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_mix.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_row.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.cnf:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/create_or_replace_statement.test:
Testing of CREATE OR REPLACE TABLE with replication
mysql-test/suite/rpl/t/rpl_gtid_startpos.test:
Test must be run in slave_ddl_exec_mode=STRICT as part of the test depends on that DROP TABLE should fail on slave.
mysql-test/suite/rpl/t/rpl_stm_log.test:
Removed some lines
mysql-test/suite/sys_vars/r/slave_ddl_exec_mode_basic.result:
Testing of slave_ddl_exec_mode
mysql-test/suite/sys_vars/t/slave_ddl_exec_mode_basic.test:
Testing of slave_ddl_exec_mode
sql/handler.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
This is to ensure that statments are not commited too early if non transactional tables are used.
sql/log.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
Also treat 'direct' log events as transactional (to get them logged as they where on the master)
sql/log_event.cc:
Ensure that the new error from DROP TABLE when trying to drop a view is treated same as the old one.
Store error code that slave expects in THD.
Set OPTION_GTID_BEGIN if we find a BEGIN.
Reset OPTION_GTID_BEGIN if we find a COMMIT.
sql/mysqld.cc:
Added slave_ddl_exec_mode_options
sql/mysqld.h:
Added slave_ddl_exec_mode_options
sql/rpl_gtid.cc:
Reset OPTION_GTID_BEGIN if we record a gtid (safety)
sql/sql_class.cc:
Regard all tables as transactional in commit if OPTION_GTID_BEGIN is set.
sql/sql_class.h:
Added to THD: log_current_statement and slave_expected_error
sql/sql_insert.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
Don't do implicit commit for CREATE if we are under OPTION_GTID_BEGIN
sql/sql_parse.cc:
Change CREATE TABLE -> CREATE OR REPLACE TABLE for slaves
Change DROP TABLE -> DROP TABLE IF EXISTS for slaves
CREATE TABLE doesn't force implicit commit in case of OPTION_GTID_BEGIN
Don't do commits before or after any statement if OPTION_GTID_BEGIN was set.
sql/sql_priv.h:
Added OPTION_GTID_BEGIN
sql/sql_show.cc:
Enhanced store_create_info() to also be able to handle CREATE OR REPLACE
sql/sql_show.h:
Updated prototype
sql/sql_table.cc:
Ensure that CREATE OR REPLACE is logged if table was deleted.
sql/sys_vars.cc:
Added slave_ddl_exec_mode
sql/transaction.cc:
Added warning if we got a GTID under OPTION_GTID_BEGIN
on server shutdown after SELECT with CONVERT_TZ
It's wrong to return my_empty_string from val_str().
Removing my_empty_string. Using make_empty_result() instead.
Plugins get error notifications only when my_message_sql() is called.
But errors are launched with THD::raise_condition() calls in other
places. These are push_warning(), implementations of SIGNAL and
RESIGNAL commands.
So it makes sence to notify plugins there in THD::raise_condition().
Add another test case. This one for killing a query that is waiting
for a prior commit, when --log-slave-updates=0 (in this case the
wait happens in different code from --log-slave-updates=1).
Add a test case for killing a waiting query in parallel replication.
Fix several bugs found:
- We should not wakeup_subsequent_commits() in ha_rollback_trans(), since we
do not know the right wakeup_error() to give.
- When a wait_for_prior_commit() is killed, we must unregister from the
waitee so we do not race and get an extra (non-kill) wakeup.
- We need to deal with error propagation correctly in queue_for_group_commit
when one thread is killed.
- Fix one locking issue in queue_for_group_commit(), we could unlock the
waitee lock too early and this end up processing wakeup() with insufficient
locking.
- Fix Xid_log_event::do_apply_event; if commit fails it must not update the
in-memory @@gtid_slave_pos state.
- Fix and cleanup some things in the rpl_parallel.cc error handling.
- Add a missing check for killed in the slave sql driver thread, to avoid a
race.
This is now otherwise on level wsrep-25.9, but storage/innobase has not been fully merged
wsrep-5.5 is not good source for that, so we probably have to cherry pick innodb changes from wsrep-5.6
------------------------------------------------------------
revno: 3929 [merge]
fixes bug: https://launchpad.net/bugs/1243150
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Wed 2013-10-23 20:05:01 +0300
message: 8kB/s -
References lp:1243150 - initial wsrep hton cleanups
* Removed wsrep_seqno_changed boolean
* wsrep_cleanup_transaction() is now called explicitly whenever it is
clear that transaction has come to an end
* wsrep_trans_cache_is_empty() now checks from cache_mngr recardless of
command type
* Separated call to wsrep->post_commit() to own function, called from
transaction.cc whenever appropriate
* wsrep_thd_is_brute_force() now investigates only thd->wsrep_exec_mode
* More comments and debug time assertions
* Debug code to check that wsrep position stored in InnoDB is
monotinically increasing. Enabled with UNIV_DEBUG
------------------------------------------------------------
revno: 3928
fixes bug: https://launchpad.net/bugs/1237889
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Tue 2013-10-22 22:01:20 +0300
message:
References lp:1237889 - reverting fix in r3926, it broke crash recovery
------------------------------------------------------------
revno: 3927
fixes bug: https://launchpad.net/bugs/1240040
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Tue 2013-10-15 14:46:15 +0300
message:
References lp:1240040 - added WSREP_MYSQL_DB as a key for DROP VIEW
------------------------------------------------------------
revno: 3926
fixes bug: https://launchpad.net/bugs/1237889
committer: Teemu Ollakka <teemu.ollakka@codership.com>
branch nick: 5.5-23
timestamp: Thu 2013-10-10 14:22:58 +0300
message:
References lp:1237889 - register wsrep hton only if thd->wsrep_exec_mode == LO
CAL_STATE
------------------------------------------------------------
revno: 3925
fixes bug: https://launchpad.net/bugs/1235635
committer: Alexey Yurchenko <alexey.yurchenko@codership.com>
branch nick: 5.5-23
timestamp: Sat 2013-10-05 18:03:06 +0300
message:
References lp:1235635 - fixed the warning by initializing c_lock to NULL.
(and valgrind warnings)
* move thd userstat initialization to the same function
that was adding thd userstat to global counters.
* initialize thd->start_bytes_received in THD::init
(when thd->userstat_running is set)
MDEV-5217: Unlock of de-allocated mutex
There was a race in the code for wait_for_commit::wakeup().
Since the waiter does a dirty read of the waiting_for_commit
flag, it was possible for the waiter to complete and deallocate
the wait_for_commit object while the waitee was still running
inside wakeup(). This would cause the waitee to access invalid
memory.
Fixed by putting an extra lock/unlock in the destructor for
wait_for_commit, to ensure that waitee has finished with the
object before it is deallocated.
The merge is still missing a few hunks related to temporary tables and
InnoDB log file size. The associated code did not seem to exist in
10.0, so the merge of that needs more work. Until this is fixed, there
are a number of test failures as a result.
Add an error code to the wait_for_commit facility.
Now, when a transaction fails, it can signal the error to
any subsequent transaction that is waiting for it to commit.
The waiting transactions then receive the error code back from
wait_for_prior_commit() and can handle the error appropriately.
Also fix one race that could cause crash if @@slave_parallel_threads
were changed several times quickly in succession.
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
ORDER BY does not work
Use "dynamic" row format (instead of "block") for MARIA internal
temporary tables created for cursors.
With "block" row format MARIA may shuffle rows, with "dynamic" row
format records are inserted sequentially (there are no gaps in data
file while we fill temporary tables).
This is needed to preserve row order when scanning materialized cursors.
Temorary fix for a number of replication tests (rpl.rpl_temp_table_mix_row
rpl.rpl_trunc_temp rpl.rpl_current_user rpl.rpl_gtid_master_promote):
- THD::decide_logging_format() should not assume that mysql.gtid_slave_pos is
a non-replicated table. This used to cause unintended behavior for COMMIT
statement: replication would switch to row-based, etc.
The question of what should be done when a user issues a statement that
explicitly modifies mysql.gtid_slave_pos table remains open.
Description:
Original fix Bug#11765744 changed mutex to read write lock
to avoid multiple recursive lock acquire operation on
LOCK_status mutex.
On Windows, locking read-write lock recursively is not safe.
Slim read-write locks, which MySQL uses if they are supported by
Windows version, do not support recursion according to their
documentation. For our own implementation of read-write lock,
which is used in cases when Windows version doesn't support SRW,
recursive locking of read-write lock can easily lead to deadlock
if there are concurrent lock requests.
Fix:
This patch reverts the previous fix for bug#11765744 that used
read-write locks. Instead problem of recursive locking for
LOCK_status mutex is solved by tracking recursion level using
counter in THD object and acquiring lock only once when we enter
fill_status() function first time.
Description:
Original fix Bug#11765744 changed mutex to read write lock
to avoid multiple recursive lock acquire operation on
LOCK_status mutex.
On Windows, locking read-write lock recursively is not safe.
Slim read-write locks, which MySQL uses if they are supported by
Windows version, do not support recursion according to their
documentation. For our own implementation of read-write lock,
which is used in cases when Windows version doesn't support SRW,
recursive locking of read-write lock can easily lead to deadlock
if there are concurrent lock requests.
Fix:
This patch reverts the previous fix for bug#11765744 that used
read-write locks. Instead problem of recursive locking for
LOCK_status mutex is solved by tracking recursion level using
counter in THD object and acquiring lock only once when we enter
fill_status() function first time.
Description:
Original fix Bug#11765744 changed mutex to read write lock
to avoid multiple recursive lock acquire operation on
LOCK_status mutex.
On Windows, locking read-write lock recursively is not safe.
Slim read-write locks, which MySQL uses if they are supported by
Windows version, do not support recursion according to their
documentation. For our own implementation of read-write lock,
which is used in cases when Windows version doesn't support SRW,
recursive locking of read-write lock can easily lead to deadlock
if there are concurrent lock requests.
Fix:
This patch reverts the previous fix for bug#11765744 that used
read-write locks. Instead problem of recursive locking for
LOCK_status mutex is solved by tracking recursion level using
counter in THD object and acquiring lock only once when we enter
fill_status() function first time.
Description:
Original fix Bug#11765744 changed mutex to read write lock
to avoid multiple recursive lock acquire operation on
LOCK_status mutex.
On Windows, locking read-write lock recursively is not safe.
Slim read-write locks, which MySQL uses if they are supported by
Windows version, do not support recursion according to their
documentation. For our own implementation of read-write lock,
which is used in cases when Windows version doesn't support SRW,
recursive locking of read-write lock can easily lead to deadlock
if there are concurrent lock requests.
Fix:
This patch reverts the previous fix for bug#11765744 that used
read-write locks. Instead problem of recursive locking for
LOCK_status mutex is solved by tracking recursion level using
counter in THD object and acquiring lock only once when we enter
fill_status() function first time.
- Make THD::raise_condition() call push_warning() after set_error_status() call.
(they seem to have accidentally exchanged in this merge cset:
sergii@pisem.net-20130721143919-7cltcw2l9g29f983)
- Rollback the patch from two csets before (the one with comment:
Update filesort_debug.test (see comment #1 in MDEV-4786 for analysis))
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
Includes 5.6 changesets for:
*****
Fix for BUG#13489996 valgrind:conditional jump or move depends on uninitialised values-field_blob.
blob_ptr_size was not initialized properly: remove this variable.
*****
Bug#14021323 CRASH IN FIELD::SET_NULL WHEN INSERTING ROWS TO NEW TABLE
*****
revno: 4559
committer: Marc Alff <marc.alff@oracle.com>
branch nick: mysql-5.6-bug14741537-v4
timestamp: Thu 2012-11-08 22:40:31 +0100
message:
Bug#14741537 - MYSQL 5.6, GTID AND PERFORMANCE_SCHEMA
Before this fix, statements using performance_schema tables:
- were marked as unsafe for replication,
- did cause warnings during execution,
- were written to the binlog, either in STATEMENT or ROW format.
When using replication with the new GTID feature,
unsafe warnings are elevated to errors,
which prevents to use both the performance_schema and GTID together.
The root cause of the problem is not related to raising warnings/errors
in some special cases, but deeper: statements involving the performance
schema should not even be written to the binary log in the first place,
because the content of the performance schema tables is 'local' to a server
instance, and may differ greatly between nodes in a replication
topology.
In particular, the DBA should be able to configure (INSERT, UPDATE, DELETE)
or flush (TRUNCATE) performance schema tables on one node,
without affecting other nodes.
This fix introduces the concept of a 'non-replicated' or 'local' table,
and adjusts the replication logic to ignore tables that are not replicated
when deciding if or how to log a statement to the binlog.
Note that while this issue was detected using the performance_schema,
other tables are also affected by the same problem.
This fix define as 'local' the following tables, which are then never
replicated:
- performance_schema.*
- mysql.general_log
- mysql.slow_log
- mysql.slave_relay_log_info
- mysql.slave_master_info
- mysql.slave_worker_info
Existing behavior for information_schema.* is unchanged by this fix,
to limit the scope of changes.
Coding wise, this fix implements the following changes:
1)
Performance schema tables are not using any replication flags,
since performance schema tables are not replicated.
2)
In open_table_from_share(),
tables with no replication capabilities (performance_schema.*),
tables with TABLE_CATEGORY_LOG (logs)
and tables with TABLE_CATEGORY_RPL_INFO (replication)
are marked as non replicated, with TABLE::no_replicate
3)
A new THD member, THD::m_binlog_filter_state,
indicate if the current statement is written to the binlog
(normal cases for most statements), or is to be discarded
(because the statements affects non replicated tables).
4)
In THD::decide_logging_format(), the replication logic
is changed to take into account non replicated tables.
Statements that affect only non replicated tables are
executed normally (no warning or errors), but not written
to the binlog.
Statements that affect (i.e., write to) a replicated table
while also using (i.e., reading from or writing to) a non replicated table
are executed normally in MIXED and ROW binlog format,
and cause a new error in STATEMENT binlog format.
THD::decide_logging_format() uses THD::m_binlog_filter_state
to indicate if a statement is to be ignored, when writing to
the binlog.
5)
In THD::binlog_query(), statements marked as ignored
are not written to the binary log.
6)
For row based replication, the existing test for 'table->no_replicate',
has been moved from binlog_log_row() to check_table_binlog_row_based().
SERIALIZABLE
Problem:
The documentation claims that WITH CONSISTENT SNAPSHOT will work for both
REPEATABLE READ and SERIALIZABLE isolation levels. But it will work only
for REPEATABLE READ isolation level. Also, the clause WITH CONSISTENT
SNAPSHOT is silently ignored when it is not applicable to the given isolation
level.
Solution:
Generate a warning when the clause WITH CONSISTENT SNAPSHOT is ignored.
rb#2797 approved by Kevin.
Note: Support team wanted to push this to 5.5+.
SERIALIZABLE
Problem:
The documentation claims that WITH CONSISTENT SNAPSHOT will work for both
REPEATABLE READ and SERIALIZABLE isolation levels. But it will work only
for REPEATABLE READ isolation level. Also, the clause WITH CONSISTENT
SNAPSHOT is silently ignored when it is not applicable to the given isolation
level.
Solution:
Generate a warning when the clause WITH CONSISTENT SNAPSHOT is ignored.
rb#2797 approved by Kevin.
Note: Support team wanted to push this to 5.5+.
Hook in the wait-for-prior-commit logic (not really tested yet).
Clean up some resource maintenance around rpl_group_info (may still be some
smaller issues there though).
Add a ToDo list at the top of rpl_parallel.cc
Implement facility for the commit in one thread to wait for the commit of
another to complete first. The wait is done in a way that does not hinder
that a waiter and a waitee can group commit together with a single fsync()
in both binlog and InnoDB. The wait is done efficiently with respect to
locking.
The patch was originally made to support TaoBao parallel replication with
in-order commit; now it will be adapted to also be used for parallel
replication of group-committed transactions.
A waiter THD registers itself with a prior waitee THD. The waiter will then
complete its commit at the earliest in the same group commit of the waitee
(when using binlog). The wait can also be done explicitly by the waitee.
added:
include/mysql/service_thd_timezone.h
libservices/thd_timezone_service.c
storage/connect/inihandl.h
storage/connect/mysql-test/connect/r/grant.result
storage/connect/mysql-test/connect/r/ini_grant.result
storage/connect/mysql-test/connect/r/mysql_grant.result
storage/connect/mysql-test/connect/r/occur.result
storage/connect/mysql-test/connect/r/odbc_sqlite3_grant.result
storage/connect/mysql-test/connect/r/pivot.result
storage/connect/mysql-test/connect/r/xcol.result
storage/connect/mysql-test/connect/r/xml_grant.result
storage/connect/mysql-test/connect/std_data/expenses.txt
storage/connect/mysql-test/connect/t/grant.test
storage/connect/mysql-test/connect/t/have_odbc_sqlite3.inc
storage/connect/mysql-test/connect/t/ini_grant.test
storage/connect/mysql-test/connect/t/mysql_grant.test
storage/connect/mysql-test/connect/t/occur.test
storage/connect/mysql-test/connect/t/odbc_sqlite3_grant.test
storage/connect/mysql-test/connect/t/pivot.test
storage/connect/mysql-test/connect/t/xcol.test
storage/connect/mysql-test/connect/t/xml_grant.test
storage/connect/rcmsg.h
storage/connect/taboccur.cpp
storage/connect/taboccur.h
storage/connect/tabutil.cpp
storage/connect/tabutil.h
storage/connect/tabxcl.cpp
storage/connect/tabxcl.h
modified:
include/my_global.h
include/my_time.h
include/mysql.h.pp
include/mysql/plugin.h
include/mysql/plugin_audit.h.pp
include/mysql/plugin_auth.h.pp
include/mysql/plugin_ftparser.h.pp
include/mysql/services.h
include/mysql_time.h
include/probes_mysql_nodtrace.h
include/service_versions.h
libservices/CMakeLists.txt
mysql-test/r/handlersocket.result
mysql-test/r/plugin.result
mysql-test/suite/plugins/r/show_all_plugins.result
sql/item_func.cc
sql/mysqld.cc
sql/set_var.cc
sql/sql_class.cc
sql/sql_plugin.cc
sql/sql_plugin.h
sql/sql_plugin_services.h
sql/sql_show.cc
sql/sys_vars.cc
storage/connect/CMakeLists.txt
storage/connect/catalog.h
storage/connect/colblk.cpp
storage/connect/colblk.h
storage/connect/connect.cc
storage/connect/connect.h
storage/connect/filamdbf.cpp
storage/connect/global.h
storage/connect/ha_connect.cc
storage/connect/ha_connect.h
storage/connect/inihandl.c
storage/connect/maputil.h
storage/connect/mycat.cc
storage/connect/myconn.cpp
storage/connect/myconn.h
storage/connect/mysql-test/connect/r/bin.result
storage/connect/mysql-test/connect/r/csv.result
storage/connect/mysql-test/connect/r/dbf.result
storage/connect/mysql-test/connect/r/dir.result
storage/connect/mysql-test/connect/r/fix.result
storage/connect/mysql-test/connect/r/fmt.result
storage/connect/mysql-test/connect/r/ini.result
storage/connect/mysql-test/connect/r/mysql.result
storage/connect/mysql-test/connect/r/odbc_sqlite3.result
storage/connect/mysql-test/connect/r/tbl.result
storage/connect/mysql-test/connect/r/upd.result
storage/connect/mysql-test/connect/r/vec.result
storage/connect/mysql-test/connect/r/xml.result
storage/connect/mysql-test/connect/t/bin.test
storage/connect/mysql-test/connect/t/csv.test
storage/connect/mysql-test/connect/t/dbf.test
storage/connect/mysql-test/connect/t/dir.test
storage/connect/mysql-test/connect/t/fix.test
storage/connect/mysql-test/connect/t/fmt.test
storage/connect/mysql-test/connect/t/ini.test
storage/connect/mysql-test/connect/t/mysql.test
storage/connect/mysql-test/connect/t/odbc_sqlite3.test
storage/connect/mysql-test/connect/t/tbl.test
storage/connect/mysql-test/connect/t/vec.test
storage/connect/mysql-test/connect/t/xml.test
storage/connect/odbconn.cpp
storage/connect/osutil.c
storage/connect/osutil.h
storage/connect/plgcnx.h
storage/connect/plgdbsem.h
storage/connect/plgdbutl.cpp
storage/connect/plugutil.c
storage/connect/rcmsg.c
storage/connect/reldef.cpp
storage/connect/tabcol.cpp
storage/connect/tabcol.h
storage/connect/tabfmt.cpp
storage/connect/tabmysql.cpp
storage/connect/tabmysql.h
storage/connect/tabodbc.cpp
storage/connect/tabpivot.cpp
storage/connect/tabpivot.h
storage/connect/tabsys.cpp
storage/connect/tabsys.h
storage/connect/tabtbl.cpp
storage/connect/tabtbl.h
storage/connect/tabwmi.cpp
storage/connect/user_connect.cc
storage/connect/valblk.cpp
storage/connect/valblk.h
storage/connect/value.cpp
storage/connect/value.h
storage/connect/xobject.h
storage/connect/xtable.h
storage/perfschema/ha_perfschema.cc
pending merges:
Alexander Barkov 2013-06-08 Fixing a few compiler warnings
Olivier Bertrand 2013-06-05 - Change CRLF line endings to LF
Olivier Bertrand 2013-06-04 - Adding parallelism to the TBL table type
Sergei Golubchik 2013-06-03 compiler warnings
Alexander Barkov 2013-06-03 Fixing the problem with my_bool_t define...
Olivier Bertrand 2013-05-28 - Fix crash when a null qrp is returned ...
Olivier Bertrand 2013-05-28 - Extending connect_assisted_discovery c...
Alexander Barkov 2013-05-28 Recording test results forgotten in the ...
Alexander Barkov 2013-05-27 [merge] Merging with the latest 10.0
Alexander Barkov 2013-05-27 - Fixing embedded verision of the Connec...
Alexander Barkov 2013-05-27 Fixing ABI template, to take into accoun...
Alexander Barkov 2013-05-27 Fixing ABI template, to take into accoun...
Olivier Bertrand 2013-05-27 - Fix Windows compile error
Alexander Barkov 2013-05-24 Adding the timezone plugin service, to c...
Alexander Barkov 2013-05-24 Do not run mysql.test in case of embedde...
Alexander Barkov 2013-05-24 Splitting SQLite3 tests into two parts:
Alexander Barkov 2013-05-24 Removing more cases of direct use of thd.
Alexander Barkov 2013-05-24 Removing direct access to thd, using fun...
Olivier Bertrand 2013-05-24 - Fix setting default type to MYSQL->PRO...
Alexander Barkov 2013-05-23 Connect: fixing non thread-safe code.
Olivier Bertrand 2013-05-22 - Changing CONNECT version number and date
Alexander Barkov 2013-05-21 "mtr --suite=connect --embedded" tests d...
Olivier Bertrand 2013-05-20 - Correct misplaced parenthesis in last ...
Olivier Bertrand 2013-05-20 - Save and restore srcdef when getting a...
Olivier Bertrand 2013-05-19 - Removing unused copy file
Olivier Bertrand 2013-05-19 [merge] - Commit merged and resolve
Alexander Barkov 2013-05-13 Fixing warnings (mostly "no previous dec...
Alexander Barkov 2013-05-13 Fixing compiler warnings ("no previous d...
Alexander Barkov 2013-05-13 Fixing a few "no previous declaration" w...
Alexander Barkov 2013-05-13 Fixing a few compilation warnings ("no p...
Olivier Bertrand 2013-05-19 - Allowing views and queries as paramete...
Olivier Bertrand 2013-05-13 [merge] - Commit merged changes
Alexander Barkov 2013-05-13 [merge] Merge from maria-10.0
Alexander Barkov 2013-05-13 Enabling --suite=connect by default
Olivier Bertrand 2013-05-13 - Code cleaning. Eliminating unused code...
Olivier Bertrand 2013-05-13 - fix use of uninitialized variable (colp)
Olivier Bertrand 2013-05-13 - Set tdbp to NULL when ignored
Olivier Bertrand 2013-05-12 - Changing mode from +x to -x
Olivier Bertrand 2013-05-12 - Code cleaning.
Olivier Bertrand 2013-05-11 - Fix tabpivot compile errors on Linux.
Olivier Bertrand 2013-05-11 - Added a test case for PIVOT tables
Olivier Bertrand 2013-05-10 - Add pivot table files and support
Olivier Bertrand 2013-05-10 - Added table type PIVOT
Olivier Bertrand 2013-05-09 - Fix inverted test on am in MYSQLDEF::D...
Olivier Bertrand 2013-05-05 - General code cleaning, eliminating a f...
Olivier Bertrand 2013-05-04 - Add test for XCOL and OCCUR tables
Olivier Bertrand 2013-05-02 - Adding a loop test to prevent PROXY ba...
Olivier Bertrand 2013-04-30 - Change in connect_assisted_discovery t...
Olivier Bertrand 2013-04-30 - Allow PROXY based tables to specify My...
Olivier Bertrand 2013-04-29 - Fix a bug causing a crash when using O...
Olivier Bertrand 2013-04-29 - Adding 3 new table types:
bzr merge lp:maria/5.5 -rtag:mariadb-5.5.31
Text conflict in cmake/cpack_rpm.cmake
Text conflict in debian/dist/Debian/control
Text conflict in debian/dist/Ubuntu/control
Text conflict in sql/CMakeLists.txt
Conflict adding file sql/db.opt. Moved existing file to sql/db.opt.moved.
Conflict adding file sql/db.opt.moved. Moved existing file to sql/db.opt.moved.moved.
Text conflict in sql/mysqld.cc
Text conflict in support-files/mysql.spec.sh
8 conflicts encountered.
MYSQL_TIME and my_time_t and back.
Using the new service instead of direct access to thd.
added:
include/mysql/service_thd_timezone.h
libservices/thd_timezone_service.c
modified:
include/my_time.h
include/mysql.h.pp
include/mysql/plugin.h
include/mysql/plugin_audit.h.pp
include/mysql/plugin_auth.h.pp
include/mysql/plugin_ftparser.h.pp
include/mysql/services.h
include/mysql_time.h
include/service_versions.h
libservices/CMakeLists.txt
sql/sql_class.cc
sql/sql_plugin_services.h
storage/connect/value.cpp
NUMBER ALREADY USED BY 5.6
The problem was that the patch for Bug#13004581 added a new error
message to 5.5. This causes it to use an error number already used
in 5.6 by ER_CANNOT_LOAD_FROM_TABLE_V2. Which means that error
message number stability between GA releases is broken.
This patch fixes the problem by removing the error message and
using ER_UNKNOWN_ERROR instead.
NUMBER ALREADY USED BY 5.6
The problem was that the patch for Bug#13004581 added a new error
message to 5.5. This causes it to use an error number already used
in 5.6 by ER_CANNOT_LOAD_FROM_TABLE_V2. Which means that error
message number stability between GA releases is broken.
This patch fixes the problem by removing the error message and
using ER_UNKNOWN_ERROR instead.
NUMBER ALREADY USED BY 5.6
The problem was that the patch for Bug#13004581 added a new error
message to 5.5. This causes it to use an error number already used
in 5.6 by ER_CANNOT_LOAD_FROM_TABLE_V2. Which means that error
message number stability between GA releases is broken.
This patch fixes the problem by removing the error message and
using ER_UNKNOWN_ERROR instead.
When logging to the binary log in row, updates and deletes to a BLACKHOLE
engine table are skipped.
It is impossible to log binary log in row format for updates and deletes to
a BLACKHOLE engine table, as no row events can be generated in these cases.
After fix, generate a warning for UPDATE/DELETE statements that modify a
BLACKHOLE table, as row events are not logged in row format.
When logging to the binary log in row, updates and deletes to a BLACKHOLE
engine table are skipped.
It is impossible to log binary log in row format for updates and deletes to
a BLACKHOLE engine table, as no row events can be generated in these cases.
After fix, generate a warning for UPDATE/DELETE statements that modify a
BLACKHOLE table, as row events are not logged in row format.
Merge of 10.0-mdev26 feature tree into 10.0-base.
Global transaction ID is prepended to each event group in the binlog.
Slave connect can request to start from GTID position instead of specifying
file name/offset of master binlog. This facilitates easy switch to a new
master.
Slave GTID state is stored in a table mysql.rpl_slave_state, which can be
InnoDB to get crash-safe slave state.
GTID includes a replication domain ID, allowing to keep track of distinct
positions for each of multiple masters.
Syntax modified to allow statements:
ALTER TABLE ADD/DROP COLUMN
ALTER TABLE ADD/DROP INDEX
ALTER TABLE ADD/DROP FOREIGN KEY
ALTER TABLE ADD/DROP PARTITION
ALTER TABLE CHANGE COLUMN
ALTER TABLE MODIFY COLUMN
DROP INDEX
to have IF (NOT) EXISTS options.
Appropriate implementations added to mysql_alter_table().
per-file comments:
mysql-test/r/alter_table.result
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
test result updated.
mysql-test/r/fulltext.result
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
mysql-test/r/partition.result
test result updated.
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
mysql-test/t/alter_table.test
tests added.
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
mysql-test/t/fulltext.test
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
tests added.
mysql-test/t/partition.test
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
tests added.
sql/field.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
create_if_not_exists field added.
sql/field.h
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
create_if_not_exists field added.
sql/partition_info.h
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
has_unique_name made public.
sql/sp_head.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
sql/sql_class.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
create_if_not_exists inited.
sql/sql_class.h
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
create_if_not_exists inited.
sql/sql_lex.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
check_exists inited.
sql/sql_lex.h
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
check_exists inited.
sql/sql_parse.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
check_exists inited.
sql/sql_table.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
handle_if_exists_options() added.
it's called in mysql_alter_table().
sql/sql_trigger.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
check_exists instead of drop_if_exists.
sql/sql_view.cc
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
check_exists instead of drop_if_exists.
sql/sql_yacc.yy
MDEV-318 IF (NOT) EXIST clauses for ALTER TABLE (MWL #252).
sintax modified.
The patch contributed by Konstantin Osipov applied.
Native comments:
Implement multiple user-level locks per connection.
GET_LOCK() function in MySQL allows a connection to hold at most
one user level lock. Taking a new lock automatically releases the
old lock, if any.
The limit of one lock per session existed since early versions
of MySQL didn't have a deadlock detector for SQL locks.
MDL patches in MySQL 5.5 added a deadlock detector,
so starting from 5.5 it became possible to take multiple locks
in any order -- a deadlock, should it occur, would be detected
and an error returned to the client which closed the wait chain.
This is exactly what is done in this patch: ULLs are moved
to use MDL subsystem.
SCHEDULER DROPS EVENTS
Problem: On a semi sync enabled server (Master/Slave),
if event scheduler drops an event after completion,
server crashes.
Analaysis: If an event is created with "ON COMPLETION
NOT PRESERVE" clause, event scheduler deletes the event
upon event completion(expiration) and the thread object
will be destroyed. In the destructor of the thread object,
mysys_var member is set to zero explicitly. Later from
the same destructor call(same execution path),
incase of semi sync enabled server, while cleanup is called,
THD::mysys_var member is accessed by THD::enter_cond()
function which causes server to crash.
Fix: mysys_var should not be explicitly set to zero and
also it is not required.
sql/sql_class.cc:
mysys_var should not be explicitly set to zero.
SCHEDULER DROPS EVENTS
Problem: On a semi sync enabled server (Master/Slave),
if event scheduler drops an event after completion,
server crashes.
Analaysis: If an event is created with "ON COMPLETION
NOT PRESERVE" clause, event scheduler deletes the event
upon event completion(expiration) and the thread object
will be destroyed. In the destructor of the thread object,
mysys_var member is set to zero explicitly. Later from
the same destructor call(same execution path),
incase of semi sync enabled server, while cleanup is called,
THD::mysys_var member is accessed by THD::enter_cond()
function which causes server to crash.
Fix: mysys_var should not be explicitly set to zero and
also it is not required.
-Change my_rnd() slightly to make it safer if two threads use it at the same time.
-Avoid some sprintf and strmov in vio.
-Changed thread_count to be automaticly incremented (instead of under LOCK_thread_count).
-Thread cache now uses LOCK_thread_cache instead of LOCK_thread_count.
-Moved delete thd out from LOCK_thread_count.
-Save some mysql_cond_broadcast(&COND_thread_count) calls.
-Removed call to getsockname() during connect.
-Initialize random generator without locks.
Other things:
-Fixed test cases that depends on changes for LOCK_grant
-Added thread_safe_decrement32() and thread_safe_increment32()
-Removed sql_rnd_with_mutex() and get_thread_running()
-In check_table_access() don't lock LOCK_grant if we can resolve the grant with user or db level grants (the normal case).
-Don't use a lock for setting THD->query_id.
-Fixed bug where thd->set_query_id() could be set to same value by multiple threads.
Thanks to Yoshinori Matsunobu for the benchmark of connection speed and to
Domas Mituzas for the inspiration for many of the fixes.
include/violite.h:
Change desc to a string pointer
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/perfschema/t/func_mutex.test:
Test for LOCK_system_variables_hash instead of LOCK_grant, as LOCK_grant is not anymore always taken for SELECT's.
mysys/my_gethwaddr.c:
More DBUG
mysys/my_rnd.c:
Change my_rnd() slightly to make it safer if two threads use it at the same time.
sql/event_scheduler.cc:
Changed thread_count to be automically incremented
Moved some safe things out from LOCK_thread_count.
Simplify deleting of THD for running thread.
sql/mysqld.cc:
Changed thread_count to be automically incremented
Thread cache now uses LOCK_thread_cache instead of LOCK_thread_count
Added delete_running_thd()
Moved delete thd out from LOCK_thread_count
More DBUG
Only call mysql_cond_broadcast(&COND_thread_count) if thread_count is 0
Removed call to getsockname() (old not anymore needed check)
sql/mysqld.h:
Removed sql_rnd_with_mutex() (not needed anymore)
Removed not used function get_thread_running()
Added thread_safe_decrement32() and thread_safe_increment32()
Simplified dec_thread_running() and inc_thread_running()
next_query_id() should return the original value for global_query_id, not the next one.
(Bug introduced with MySQL 5.5 merge).
sql/sql_acl.cc:
In check_table_access() don't lock LOCK_grant if we can resolve the grant with user or db level grants (the normal case).
sql/sql_class.cc:
Removed thd_lock_thread_count() and thd_unlock_thread_count()
Initialize random generator without locks
Don't use a lock for setting THD->query_id.
(This is only accessed by thread owning the THD)
sql/sql_class.h:
Don't use a lock for setting THD->query_id.
sql/sql_insert.cc:
Changed thread_count to be automically incremented
sql/sql_parse.cc:
Changed thread_count to be automically incremented
Fixed bug where thd->set_query_id() could be set to same value by multiple threads.
vio/vio.c:
Don't generate 'desc' with sprintf/strmov. Assign a pointer instead.
(Good enough as this is just for debugging)
revid:georgi.kodinov@oracle.com-20120309130449-82e3bs5v3et1x0ef
committer: Georgi Kodinov <Georgi.Kodinov@Oracle.com>
timestamp: Fri 2012-03-09 15:04:49 +0200
message:
Bug #12408412: GROUP_CONCAT + ORDER BY + INPUT/OUTPUT SAME
USER VARIABLE = CRASH
Moved the preparation of the variables that receive the output from
SELECT INTO from execution time (JOIN:execute) to compile time
(JOIN::prepare). This ensures that if the same variable is used in the
SELECT part of SELECT INTO it will be properly marked as non-const
for this query.
Test case added.
Used proper fast iterator.
a better fix (much smaller and without regressions) is coming from 5.1
MySQL Bug #12408412: GROUP_CONCAT + ORDER BY + INPUT/OUTPUT SAME USER VARIABLE = CRASH
and
MySQL Bug#14664077 SEVERE PERFORMANCE DEGRADATION IN SOME CASES WHEN USER VARIABLES ARE USED
sql/item_func.cc:
don't use anything from Item_func_set_user_var::fix_fields()
in Item_func_set_user_var::save_item_result()
sql/sql_class.cc:
Call suv->save_item_result(item) *before* doing suv->fix_fields(), because
the former evaluates the item (and caches its value), while the latter marks
the user variable as non-const. The problem is that the item was fix_field'ed
when the user variable was const, and it doesn't expect it to change to non-const
in the middle of the execution.
