Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
WHERE predicates containing references to empty tables in a
subquery were handled incorrectly by the optimizer when
executing EXPLAIN. As a result, the optimizer could try to
evaluate such predicates rather than just stop with
"Impossible WHERE noticed after reading const tables" as
it would do in a non-subquery case. This led to valgrind
errors and crashes.
Fixed the code checking the above condition so that subqueries
are not excluded and hence are handled in the same way as top
level SELECTs.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
Arg_comparator initializes 'comparators' array in case of
ROW comparison and does not free this array on destruction.
It leads to memory leaks.
The fix:
-added Arg_comparator::cleanup() method which frees
'comparators' array.
-added Item_bool_func2::cleanup() method which calls
Arg_comparator::cleanup() method
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/subselect.result
Text conflict in mysql-test/r/subselect3.result
Text conflict in mysql-test/r/type_datetime.result
Text conflict in sql/share/Makefile.am
The problem is that not all column names retrieved from a SELECT
statement can be used as view column names due to length and format
restrictions. The server failed to properly check the conformity
of those automatically generated column names before storing the
final view definition on disk.
Since columns retrieved from a SELECT statement can be anything
ranging from functions to constants values of any format and length,
the solution is to rewrite to a pre-defined format any names that
are not acceptable as a view column name.
The name is rewritten to "Name_exp_%u" where %u translates to the
position of the column. To avoid this conversion scheme, define
explict names for the view columns via the column_list clause.
Also, aliases are now only generated for top level statements.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
on re-execution of prepared statement
Problem: some (see eq_ref_table()) ORDER BY/GROUP BY optimization
is called before each PS execution. However, we don't properly
initialize its stucture every time before the call.
Fix: properly initialize the sturture used.
2617.31.12, 2617.31.15, 2617.31.15, 2617.31.16, 2617.43.1
- initial changeset that introduced the fix for
Bug#989 and follow up fixes for all test suite failures
introduced in the initial changeset.
------------------------------------------------------------
revno: 2617.31.1
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Fri 2009-03-06 19:17:00 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
Currently the MySQL server does not keep metadata locks on
schema objects for the duration of a transaction, thus failing
to guarantee the integrity of the schema objects being used
during the transaction and to protect then from concurrent
DDL operations. This also poses a problem for replication as
a DDL operation might be replicated even thought there are
active transactions using the object being modified.
The solution is to defer the release of metadata locks until
a active transaction is either committed or rolled back. This
prevents other statements from modifying the table for the
entire duration of the transaction. This provides commitment
ordering for guaranteeing serializability across multiple
transactions.
- Incompatible change:
If MySQL's metadata locking system encounters a lock conflict,
the usual schema is to use the try and back-off technique to
avoid deadlocks -- this schema consists in releasing all locks
and trying to acquire them all in one go.
But in a transactional context this algorithm can't be utilized
as its not possible to release locks acquired during the course
of the transaction without breaking the transaction commitments.
To avoid deadlocks in this case, the ER_LOCK_DEADLOCK will be
returned if a lock conflict is encountered during a transaction.
Let's consider an example:
A transaction has two statements that modify table t1, then table
t2, and then commits. The first statement of the transaction will
acquire a shared metadata lock on table t1, and it will be kept
utill COMMIT to ensure serializability.
At the moment when the second statement attempts to acquire a
shared metadata lock on t2, a concurrent ALTER or DROP statement
might have locked t2 exclusively. The prescription of the current
locking protocol is that the acquirer of the shared lock backs off
-- gives up all his current locks and retries. This implies that
the entire multi-statement transaction has to be rolled back.
- Incompatible change:
FLUSH commands such as FLUSH PRIVILEGES and FLUSH TABLES WITH READ
LOCK won't cause locked tables to be implicitly unlocked anymore.
The problem was that the multiple evaluations of a ENCODE or
DECODE function within a single statement caused the random
generator to be reinitialized at each evaluation, even though
the parameters were constants.
The solution is to initialize the random generator only once
if the password (seed) parameter is constant.
This patch borrows code and ideas from Georgi Kodinov's patch.
Actually there is two different bugs.
The first one caused crash on queries with WHERE condition over views
containing WHERE condition. A wrong check for prepared statement phase led
to items for view fields being allocated in the execution memory and freed
at the end of execution. Thus the optimized WHERE condition refers to
unallocated memory on the second execution and server crashed.
The second one caused by the Item_cond::compile function not saving changes
it made to the item tree. Thus on the next execution changes weren't
reverted and server crashed on dereferencing of unallocated space.
The new helper function called is_stmt_prepare_or_first_stmt_execute
is added to the Query_arena class.
The find_field_in_view function now uses
is_stmt_prepare_or_first_stmt_execute() to check whether
newly created view items should be freed at the end of the query execution.
The Item_cond::compile function now saves changes it makes to item tree.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
Original revision in 6.0:
------------------------------------------------------------
revno: 2630.13.11
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-wl4300
timestamp: Thu 2008-07-24 11:44:21 +0400
message:
A patch for WL#4300: Define privileges for tablespaces.
------------------------------------------------------------
per-file messages:
mysql-test/r/grant.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/ps.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/system_mysql_db.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/suite/falcon/r/falcon_tablespace_priv.result
Test case for WL#4300.
mysql-test/suite/falcon/t/falcon_tablespace_priv.test
Test case for WL#4300.
mysql-test/suite/ndb/r/ndb_dd_ddl.result
Test case for WL#4300.
mysql-test/suite/ndb/t/ndb_dd_ddl.test
Test case for WL#4300.
scripts/mysql_system_tables.sql
New columm 'Create_tablespace_priv' has been added to mysql.user.
scripts/mysql_system_tables_data.sql
'CREATE TABLESPACE' is granted by default to the root user.
scripts/mysql_system_tables_fix.sql
Grant 'CREATE TABLESPACE' privilege during system table upgrade
if a user had SUPER privilege.
sql/sql_acl.cc
Added CREATE TABLESPACE privilege.
sql/sql_acl.h
Added CREATE TABLESPACE privilege.
sql/sql_parse.cc
Check global 'CREATE TABLESPACE' privilege for the following SQL statements:
- CREATE | ALTER | DROP TABLESPACE
- CREATE | ALTER | DROP LOGFILE GROUP
sql/sql_show.cc
Added CREATE TABLESPACE privilege.
sql/sql_yacc.yy
Added CREATE TABLESPACE privilege.
In STRICT mode, out-of-bounds values caused an error message
to be queued (rather than just a warning), without any further
error-like processing happening. (The error is queued during
update, at which time it's too late. For it to be processed
properly, it would need to be queued during check-stage.)
The assertion rightfully complains that we're trying to send
an OK while having an error queued.
Changeset breaks a lot of tests out into check-stage. This also
allows us to send more correct warnings/error messages.
enabled)
Before this fix, the lexer and parser would treat the ';' character as a
different token (either ';' or END_OF_INPUT), based on convoluted logic,
which failed in simple cases where a stored procedure is implemented as a
single statement, and used in a multi query.
With this fix:
- the character ';' is always parsed as a ';' token in the lexer,
- parsing multi queries is implemented in the parser, in the 'query:' rules,
- the value of thd->client_capabilities, which is the capabilities
negotiated between the client and the server during bootstrap,
is immutable and not arbitrarily modified during parsing (which was the
root cause of the bug)
The problem is that passing anything other than a integer to a limit
clause in a prepared statement would fail. This limitation was introduced
to avoid replication problems (e.g: replicating the statement with a
string argument would cause a parse failure in the slave).
The solution is to convert arguments to the limit clause to a integer
value and use this converted value when persisting the query to the log.
The problem is that CREATE VIEW statements inside prepared statements
weren't being expanded during the prepare phase, which leads to objects
not being allocated in the appropriate memory arenas.
The solution is to perform the validation of CREATE VIEW statements
during the prepare phase of a prepared statement. The validation
during the prepare phase assures that transformations of the parsed
tree will use the permanent arena of the prepared statement.
The unsignedness of large integer user variables was not being
properly preserved when feeded to prepared statements. This was
happening because the unsigned flags wasn't being updated when
converting the user variable is converted to a parameter.
The solution is to copy the unsigned flag when converting the
user variable to a parameter and take the unsigned flag into
account when converting the integer to a string.
Default values of variables were not subject to upper/lower bounds
and step, while setting variables was. Bounds and step are also
applied to defaults now; defaults are corrected quietly, values
given by the user are corrected, and a correction-warning is thrown
as needed. Lastly, very large values could wrap around, starting
from 0 again. They are bounded at the maximum value for the
respective data-type now if no lower maximum is specified in the
variable's definition.
