procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
variable. The problem was that THD::connect_utime could be
used without being initialized when the main thread is used
to handle connections (--thread-handling=no-threads).
The problem is that when a optimization of read-only transactions
(bypass 2-phase commit) was implemented, it removed the code that
reseted the XID once a transaction wasn't active anymore:
sql/sql_parse.cc:
- bzero(&thd->transaction.stmt, sizeof(thd->transaction.stmt));
- if (!thd->active_transaction())
- thd->transaction.xid_state.xid.null();
+ thd->transaction.stmt.reset();
This mostly worked fine as the transaction commit and rollback
functions (in handler.cc) reset the XID once the transaction is
ended. But those functions wouldn't reset the XID in case of
a empty transaction, leading to a assertion when a new starting
a new XA transaction.
The solution is to ensure that the XID state is reset when empty
transactions are ended (by either commit or rollback). This is
achieved by reorganizing the code so that the transaction cleanup
routine is invoked whenever a transaction is ended.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
MySQL crashes if a user without proper privileges attempts to create a procedure.
The crash happens because more than one error state is pushed onto the Diagnostic
area. In this particular case the user is denied to implicitly create a new user
account with the implicitly granted privileges ALTER- and EXECUTE ROUTINE.
The new account is needed if the original user account contained a host mask.
A user account with a host mask is a distinct user account in this context.
An alternative would be to first get the most permissive user account which
include the current user connection and then assign privileges to that
account. This behavior change is considered out of scope for this bug patch.
The implicit assignment of privileges when a user creates a stored routine is a
considered to be a feature for user convenience and as such it is not
a critical operation. Any failure to complete this operation is thus considered
non-fatal (an error becomes a warning).
The patch back ports a stack implementation of the internal error handler interface.
This enables the use of multiple error handlers so that it is possible to intercept
and cancel errors thrown by lower layers. This is needed as a error handler already
is used in the call stack emitting the errors which needs to be converted.
due to name_const substitution
Problem:
"In general, statements executed within a stored procedure
are written to the binary log using the same rules that
would apply were the statements to be executed in standalone
fashion. Some special care is taken when logging procedure
statements because statement execution within procedures
is not quite the same as in non-procedure context".
For example, each reference to a local variable in SP's
statements is replaced by NAME_CONST(var_name, var_value).
Queries like
"CREATE TABLE ... SELECT FUNC(local_var ..."
are logged as
"CREATE TABLE ... SELECT FUNC(NAME_CONST("local_var", var_value) ..."
that leads to differrent field names and
might result in "Incorrect column name" if var_value is long enough.
Fix: in 5.x we'll issue a warning in such a case.
In 6.0 we should get rid of NAME_CONST().
Note: this issue and change should be described in the documentation
("Binary Logging of Stored Programs").
Fine-tuning. Broke out comparison into method by
suggestion of Davi. Clarified comments. Reverting
test-case which I find too brittle; proper test
case in 5.1+.
When binlog_format is STATEMENT and the statement is unsafe before,
the unsafe warning/error message was issued without checking
whether the SQL_LOG_BIN was turned on or not.
Fixed with adding a sql_log_bin_toplevel flag in THD to check
whether SQL_LOG_BIN is ON in current session whatever the current is in sp or not.
- Add support for setting it as a server commandline argument
- Add support for those switches:
= no_index_merge
= no_index_merge_union
= no_index_merge_sort_union
= no_index_merge_intersection
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
BUG#39325 Server crash inside MYSQL_LOG::purge_first_log halts replicaiton
The patch reverses the order of the purging and updating events for log and relay-log.info/index files respectively.
This solves the problem of having holes caused by crashes happening between updating info/index files and purging logs.
NOTE: This is a combined patch for BUG#38826 and BUG#39325. This patch is based on bugteam tree and takes into account reviewers suggestions.
The problem was that the server did not robustly handle a
unilateral roll back issued by the Resource Manager (RM)
due to a resource deadlock within the transaction branch.
By not acknowledging the roll back, the server (TM) would
eventually corrupt the XA transaction state and crash.
The solution is to mark the transaction as rollback-only
if the RM indicates that it rolled back its branch of the
transaction.
The problem was that the server did not robustly handle a
unilateral roll back issued by the Resource Manager (RM)
due to a resource deadlock within the transaction branch.
By not acknowledging the roll back, the server (TM) would
eventually corrupt the XA transaction state and crash.
The solution is to mark the transaction as rollback-only
if the RM indicates that it rolled back its branch of the
transaction.
When running Stored Routines the Status Variable "Questions" was wrongly
incremented. According to the manual it should contain the "number of
statements that clients have sent to the server"
Introduced a new status variable 'questions' to replace the query_id
variable which currently corresponds badly with the number of statements
sent by the client.
The new behavior is ment to be backward compatible with 4.0 and at the
same time work with new features in a similar way.
This is a backport from 6.0
The failure was caused by executing a CREATE-SELECT statement that creates a
table in another database than the current one. In row-based logging, the
CREATE statement was written to the binary log without the database, hence
creating the table in the wrong database, causing the following inserts to
fail since the table didn't exist in the given database.
Fixed the bug by adding a parameter to store_create_info() that will make
the function print the database name before the table name and used that
in the calls that write the CREATE statement to the binary log. The database
name is only printed if it is different than the currently selected database.
The output of SHOW CREATE TABLE has not changed and is still printed without
the database name.
"Trigger fired multiple times leads to gaps in auto_increment sequence".
The bug was that if a trigger fired multiple times inside a top
statement (for example top-statement is a multi-row INSERT,
and trigger is ON INSERT), and that trigger inserted into an auto_increment
column, then gaps could be observed in the auto_increment sequence,
even if there were no other users of the database (no concurrency).
It was wrong usage of THD::auto_inc_intervals_in_cur_stmt_for_binlog.
Note that the fix changes "class handler", I'll tell the Storage Engine API team.
The assertion indicates that some data was left in the transaction
cache when the server was shut down, which means that a previous
statement did not commit or rollback correctly.
What happened was that a bug in the rollback of a transactional
table caused the transaction cache to be emptied, but not reset.
The error can be triggered by having a failing UPDATE or INSERT,
on a transactional table, causing an implicit rollback.
Fixed by always flushing the pending event to reset the state
properly.
The failure was caused by executing a CREATE-SELECT statement that creates a
table in another database than the current one. In row-based logging, the
CREATE statement was written to the binary log without the database, hence
creating the table in the wrong database, causing the following inserts to
fail since the table didn't exist in the given database.
Fixed the bug by adding a parameter to store_create_info() that will make
the function print the database name before the table name and used that
in the calls that write the CREATE statement to the binary log. The database
name is only printed if it is different than the currently selected database.
The output of SHOW CREATE TABLE has not changed and is still printed without
the database name.
The problem of this bug is that we need to get the list of tables
to be updated for a multi-table update statement, which requires to
open all the tables referenced by the statement and resolve all
the fields involved in update in order to figure out the list of
tables for update. However if there are replicate filter rules,
some tables might not exist on slave and result in a failure
before we could examine the filter rules.
I think the whole problem can not be solved on slave alone,
the master must record and send the information of tables
involved for update to slave, so that the slave do not need to
open all the tables referenced by the multi-table update statement to
figure out which tables are involved for update.
So a status variable is added to Query_log event to store the
value of table map for update on master. And on slave, it will
try to get the value of this variable and use it to examine
filter rules without opening any tables on slave, if this values
is not available, the old approach is used and thus the bug will
still occur for when replicating from old masters.
