Enable unusable key notes for non-equality predicates:
<, <=, =>, >, BETWEEN, IN, LIKE
Note, in some scenarios it displays duplicate notes, e.g.
for queries with ORDER BY:
SELECT * FROM t1
WHERE indexed_string_column >= 10
ORDER BY indexed_string_column
LIMIT 5;
This should be tolarable. Getting rid of the diplicate note
completely would need a much more complex patch, which is
not desiable in 10.6.
Details:
- Changing RANGE_OPT_PARAM::note_unusable_keys from bool
to a new data type Item_func::Bitmap, so the caller can
choose with a better granuality which predicates
should raise unusable key notes inside the range optimizer:
a. all predicates (=, <=>, <, <=, =>, >, BETWEEN, IN, LIKE)
b. all predicates except equality (=, <=>)
c. none of the predicates
"b." is needed because in some scenarios equality predicates (=, <=>)
send unusable key notes at an earlier stage, before the range optimizer,
during update_ref_and_keys(). Calling the range optimizer with
"all predicates" would produce duplicate notes for = and <=> in such cases.
- Fixing get_quick_record_count() to call the range optimizer
with "all predicates except equality" instead of "none of the predicates".
Before this change the range optimizer suppressed all notes for
non-equality predicates: <, <=, =>, >, BETWEEN, IN, LIKE.
This actually fixes the reported problem.
- Fixing JOIN::make_range_rowid_filters() to call the range optimizer
with "all predicates except equality" instead of "all predicates".
Before this change the range optimizer produced duplicate notes
for = and <=> during a rowid_filter optimization.
- Cleanup:
Adding the op_collation argument to Field::raise_note_cannot_use_key_part()
and displaying the operation collation rather than the argument collation
in the unusable key note. This is important for operations with more than
two arguments: BETWEEN and IN, e.g.:
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
BETWEEN 'a' AND 'b' COLLATE utf8mb3_unicode_ci;
SELECT * FROM t1
WHERE column_utf8mb3_general_ci
IN ('a', 'b' COLLATE utf8mb3_unicode_ci);
The note for 'a' now prints utf8mb3_unicode_ci as the collation.
which is the collation of the entire operation:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_unicode_ci`
Before this change it printed the collation of 'a',
so the note was confusing:
Cannot use key key1 part[0] for lookup:
"`column_utf8mb3_general_ci`" of collation `utf8mb3_general_ci` >=
"'a'" of collation `utf8mb3_general_ci`"
During the 10.5->10.6 merge please use the 10.6 code on conflicts.
This is the 10.5 version of the patch (a backport of the 10.6 version).
Unlike 10.6 version, it makes changes in plugin/type_inet/sql_type_inet.*
rather than in sql/sql_type_fixedbin.h
Item_bool_rowready_func2, Item_func_between, Item_func_in
did not check if a not-NULL argument of an arbitrary data type
can produce a NULL value on conversion to INET6.
This caused a crash on DBUG_ASSERT() in conversion failures,
because the function returned SQL NULL for something that
has Item::maybe_null() equal to false.
Adding setting NULL-ability in such cases.
Details:
- Removing the code in Item_func::setup_args_and_comparator()
performing character set aggregation with optional narrowing.
This aggregation is done inside Arg_comparator::set_cmp_func_string().
So this code was redundant
- Removing Item_func::setup_args_and_comparator() as it git simplified to
just to two lines:
convert_const_compared_to_int_field(thd);
return cmp->set_cmp_func(thd, this, &args[0], &args[1], true);
Using these lines directly in:
- Item_bool_rowready_func2::fix_length_and_dec()
- Item_func_nullif::fix_length_and_dec()
- Adding a new virtual method:
- Type_handler::Item_bool_rowready_func2_fix_length_and_dec().
- Adding tests detecting if the data type conversion can return SQL NULL into
the following methods of Type_handler_inet6:
- Item_bool_rowready_func2_fix_length_and_dec
- Item_func_between_fix_length_and_dec
- Item_func_in_fix_comparator_compatible_types
This is the 10.6 version of the patch.
Item_bool_rowready_func2, Item_func_between, Item_func_in
did not check if a not-NULL argument of an arbitrary data type
can produce a NULL value on conversion to INET6.
This caused a crash on DBUG_ASSERT() in conversion failures,
because the function returned SQL NULL for something that
has Item::maybe_null() equal to false.
Adding setting NULL-ability in such cases.
Details:
- Removing the code in Item_func::setup_args_and_comparator()
performing character set aggregation with optional narrowing.
This aggregation is done inside Arg_comparator::set_cmp_func_string().
So this code was redundant
- Removing Item_func::setup_args_and_comparator() as it git simplified to
just to two lines:
convert_const_compared_to_int_field(thd);
return cmp->set_cmp_func(thd, this, &args[0], &args[1], true);
Using these lines directly in:
- Item_bool_rowready_func2::fix_length_and_dec()
- Item_func_nullif::fix_length_and_dec()
- Adding a new virtual method:
- Type_handler::Item_bool_rowready_func2_fix_length_and_dec().
- Adding tests detecting if the data type conversion can return SQL NULL into
the following methods of Type_handler_fbt:
- Item_bool_rowready_func2_fix_length_and_dec
- Item_func_between_fix_length_and_dec
- Item_func_in_fix_comparator_compatible_types
The crash happened with an indexed virtual column whose
value is evaluated using a function that has a different meaning
in sql_mode='' vs sql_mode=ORACLE:
- DECODE()
- LTRIM()
- RTRIM()
- LPAD()
- RPAD()
- REPLACE()
- SUBSTR()
For example:
CREATE TABLE t1 (
b VARCHAR(1),
g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL,
KEY g(g)
);
So far we had replacement XXX_ORACLE() functions for all mentioned function,
e.g. SUBSTR_ORACLE() for SUBSTR(). So it was possible to correctly re-parse
SUBSTR_ORACLE() even in sql_mode=''.
But it was not possible to re-parse the MariaDB version of SUBSTR()
after switching to sql_mode=ORACLE. It was erroneously mis-interpreted
as SUBSTR_ORACLE().
As a result, this combination worked fine:
SET sql_mode=ORACLE;
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode='';
INSERT ...
But the other way around it crashed:
SET sql_mode='';
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode=ORACLE;
INSERT ...
At CREATE time, SUBSTR was instantiated as Item_func_substr and printed
in the FRM file as substr(). At re-open time with sql_mode=ORACLE, "substr()"
was erroneously instantiated as Item_func_substr_oracle.
Fix:
The fix proposes a symmetric solution. It provides a way to re-parse reliably
all sql_mode dependent functions to their original CREATE TABLE time meaning,
no matter what the open-time sql_mode is.
We take advantage of the same idea we previously used to resolve sql_mode
dependent data types.
Now all sql_mode dependent functions are printed by SHOW using a schema
qualifier when the current sql_mode differs from the function sql_mode:
SET sql_mode='';
CREATE TABLE t1 ... SUBSTR(a,b,c) ..;
SET sql_mode=ORACLE;
SHOW CREATE TABLE t1; -> mariadb_schema.substr(a,b,c)
SET sql_mode=ORACLE;
CREATE TABLE t2 ... SUBSTR(a,b,c) ..;
SET sql_mode='';
SHOW CREATE TABLE t1; -> oracle_schema.substr(a,b,c)
Old replacement names like substr_oracle() are still understood for
backward compatibility and used in FRM files (for downgrade compatibility),
but they are not printed by SHOW any more.
Change history in the affected code:
- Since 10.4.8 (MDEV-20397 and MDEV-23311), functions ROUND(), CEILING(),
FLOOR() return a TIME value for a TIME input.
- Since 10.4.14 (MDEV-23525), MIN() and MAX() calculate a result for a TIME
input using val_native() rather than val_str().
Problem:
The patch for MDEV-23525 did not take into account combinations like
MIN(ROUND(time)), MAX(FLOOR(time)), etc.
MIN() and MAX() with ROUND(time), CEILING(time), FLOOR(time) as an argument
call the method val_native() of the undelying classes Item_func_round and
Item_func_int_val. However these classes implemented the method val_native()
as DBUG_ASSERT(0).
Fix:
This patch adds a TIME-specific code inside:
- Item_func_round::val_native()
- Item_func_int_val::val_native()
still with DBUG_ASSERT(0) for all other data types,
as other data types do not call val_native() of these classes.
We'll need a more generic solition eventualy, e.g.
turn Item_func_round and Item_func_int_val into Item_handled_func.
However, this change would be too risky for 10.4 at this point.
'long long int'; cast to an unsigned type to negate this value ..
to itself in Item_func_mul::int_op and Item_func_round::int_op
Problems:
The code in multiple places in the following methods:
- Item_func_mul::int_op()
- longlong Item_func_int_div::val_int()
- Item_func_mod::int_op()
- Item_func_round::int_op()
did not properly check for corner values LONGLONG_MIN
and (LONGLONG_MAX+1) before doing negation.
This cuased UBSAN to complain about undefined behaviour.
Fix summary:
- Adding helper classes ULonglong, ULonglong_null, ULonglong_hybrid
(in addition to their signed couterparts in sql/sql_type_int.h).
- Moving the code performing multiplication of ulonglong numbers
from Item_func_mul::int_op() to ULonglong_hybrid::ullmul().
- Moving the code responsible for extracting absolute values
from negative numbers to Longlong::abs().
It makes sure to perform negation without undefinite behavior:
LONGLONG_MIN is handled in a special way.
- Moving negation related code to ULonglong::operator-().
It makes sure to perform negation without undefinite behavior:
(LONGLONG_MAX + 1) is handled in a special way.
- Moving signed<=>unsigned conversion code to
Longlong_hybrid::val_int() and ULonglong_hybrid::val_int().
- Reusing old and new sql_type_int.h classes in multiple
places in Item_func_xxx::int_op().
Fix details (explain how sql_type_int.h classes are reused):
- Instead of straight negation of negative "longlong" arguments
*before* performing unsigned multiplication,
Item_func_mul::int_op() now calls ULonglong_null::ullmul()
using Longlong_hybrid_null::abs() to pass arguments.
This fixes undefined behavior N1.
- Instead of straight negation of "ulonglong" result
*after* performing unsigned multiplication,
Item_func_mul::int_op() now calls ULonglong_hybrid::val_int(),
which recursively calls ULonglong::operator-().
This fixes undefined behavior N2.
- Removing duplicate negating code from Item_func_mod::int_op().
Using ULonglong_hybrid::val_int() instead.
This fixes undefinite behavior N3.
- Removing literal "longlong" negation from Item_func_round::int_op().
Using Longlong::abs() instead, which correctly handler LONGLONG_MIN.
This fixes undefinite behavior N4.
- Removing the duplicate (negation related) code from
Item_func_int_div::val_int(). Reusing class ULonglong_hybrid.
There were no undefinite behavior in here.
However, this change allowed to reveal a bug in
"-9223372036854775808 DIV 1".
The removed negation code appeared to be incorrect when
negating +9223372036854775808. It returned the "out of range" error.
ULonglong_hybrid::operator-() now handles all values correctly
and returns +9223372036854775808 as a negation for -9223372036854775808.
Re-recording wrong results for
SELECT -9223372036854775808 DIV 1;
Now instead of "out of range", it returns -9223372036854775808,
which is the smallest possible value for the expression data type
(signed) BIGINT.
- Removing "no UBSAN" branch from Item_func_splus::int_opt()
and Item_func_minus::int_opt(), as it made UBSAN happy but
in RelWithDebInfo some MTR tests started to fail.
When a query does implicit grouping and join operation produces an empty
result set, a NULL-complemented row combination is generated.
However, constant table fields still show non-NULL values.
What happens in the is that end_send_group() is called with a
const row but without any rows matching the WHERE clause.
This last part is shown by 'join->first_record' not being set.
This causes item->no_rows_in_result() to be called for all items to reset
all sum functions to their initial state. However fields are not set
to NULL.
The used fix is to produce NULL-complemented records for constant tables
as well. Also, reset the constant table's records back in case we're
in a subquery which may get re-executed.
An alternative fix would have item->no_rows_in_result() also work
with Item_field objects.
There is some other issues with the code:
- join->no_rows_in_result_called is used but never set.
- Tables that are used with group functions are not properly marked as
maybe_null, which is required if the table rows should be regarded as
null-complemented (not existing).
- The code that tries to detect if mixed_implicit_grouping should be set
didn't take into account all usage of fields and sum functions.
- Item_func::restore_to_before_no_rows_in_result() called the wrong
function.
- join->clear() does not use a table_map argument to clear_tables(),
which caused it to ignore constant tables.
- unclear_tables() does not correctly restore status to what is
was before clear_tables().
Main bug fix was to always use a table_map argument to clear_tables() and
always use join->clear() and clear_tables() together with unclear_tables().
Other fixes:
- Fixed Item_func::restore_to_before_no_rows_in_result()
- Set 'join->no_rows_in_result_called' when no_rows_in_result_set()
is called.
- Removed not used argument from setup_end_select_func().
- More code comments
- Ensure that end_send_group() modifies the same fields as are in the
result set.
- Changed return_zero_rows() to use pointers instead of references,
similar to the rest of the code.
Reviewer: Sergei Petrunia <sergey@mariadb.com>
When a query does implicit grouping and join operation produces an empty
result set, a NULL-complemented row combination is generated.
However, constant table fields still show non-NULL values.
What happens in the is that end_send_group() is called with a
const row but without any rows matching the WHERE clause.
This last part is shown by 'join->first_record' not being set.
This causes item->no_rows_in_result() to be called for all items to reset
all sum functions to their initial state. However fields are not set
to NULL.
The used fix is to produce NULL-complemented records for constant tables
as well. Also, reset the constant table's records back in case we're
in a subquery which may get re-executed.
An alternative fix would have item->no_rows_in_result() also work
with Item_field objects.
There is some other issues with the code:
- join->no_rows_in_result_called is used but never set.
- Tables that are used with group functions are not properly marked as
maybe_null, which is required if the table rows should be regarded as
null-complemented (not existing).
- The code that tries to detect if mixed_implicit_grouping should be set
didn't take into account all usage of fields and sum functions.
- Item_func::restore_to_before_no_rows_in_result() called the wrong
function.
- join->clear() does not use a table_map argument to clear_tables(),
which caused it to ignore constant tables.
- unclear_tables() does not correctly restore status to what is
was before clear_tables().
Main bug fix was to always use a table_map argument to clear_tables() and
always use join->clear() and clear_tables() together with unclear_tables().
Other fixes:
- Fixed Item_func::restore_to_before_no_rows_in_result()
- Set 'join->no_rows_in_result_called' when no_rows_in_result_set()
is called.
- Removed not used argument from setup_end_select_func().
- More code comments
- Ensure that end_send_group() modifies the same fields as are in the
result set.
- Changed return_zero_rows() to use pointers instead of references,
similar to the rest of the code.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
rename to stress that is a specific hack for Item_func_nextval
and should not be used for other items.
If a vcol uses Item_func_nextval, a corresponding table for the sequence
should be added to the prelocking list (in that sense NEXTVAL is not
simply a function, but more like a subquery), see add_internal_tables()
in DML_prelocking_strategy::handle_table(). At the moment it is only
implemented for DEFAULT, not for GENERATED ALWAYS AS, thus the
VCOL_NEXTVAL hack.
it's not "non deterministic", it's completely defined
by @@rand_seed1 and @@rand_seed2. And as a session func it needs
to be re-fixed at the beginning of every statement.
- Adding data type aliases:
using Lex_column_charset_collation_attrs_st = Lex_charset_collation_st;
using Lex_column_charset_collation_attrs = Lex_charset_collation;
and using them all around the code (except lex_charset.*)
instead of the original names.
- Renaming Lex_field_type_st::lex_charset_collation()
to charset_collation_attrs()
- Renaming Column_definition::set_lex_charset_collation()
to set_charset_collation_attrs()
- Renaming Column_definition::lex_charset_collation()
to charset_collation_attrs()
Rationale:
The name "Lex_charset_collation" was a not very good name.
It does not tell details about its properties:
1. if the charset is optional (yes)
2. if the collation is optional (yes)
3. if the charset can be exact (yes) or context (no)
4. if the collation can be: exact (yes) or context (yes)
5. if the clauses can be repeated multiple times (yes)
We'll need a few new data types soon with different properties.
For example, to fix MDEV-27896 and MDEV-27782, we'll need a new
data type which is very like Lex_charset_collation, but additionally
supports CHARACTER SET DEFAULT (which is allowed on table and database level,
but is not allowed on the column level yet), i.e. with:
"the charset can be exact (yes) or context (yes)" in N3.
So we'll have to rename Lex_charset_collation to something else,
e.g.: Lex_exact_charset_extended_collation_attrs,
and add a new data type:
e.g. Lex_extended_charset_extended_collation_attrs
Also, we'll possibly allow CHARACTER SET DEFAULT at the column level for
consistency with other places. So the storge on the column level can change:
- from Lex_exact_charset_extended_collation_attrs
- to Lex_extended_charset_extended_collation_attrs
Adding the aliases introduces a convenient abstraction against
upcoming renames and c++ data type changes.
This patch also fixes:
MDEV-27690 Crash on `CHARACTER SET csname COLLATE DEFAULT` in column definition
MDEV-27853 Wrong data type on column `COLLATE DEFAULT` and table `COLLATE some_non_default_collation`
MDEV-28067 Multiple conflicting column COLLATE clauses are not rejected
MDEV-28118 Wrong collation of `CAST(.. AS CHAR COLLATE DEFAULT)`
MDEV-28119 Wrong column collation on MODIFY + CONVERT
MDEV-25604 Atomic DDL: Binlog event written upon recovery does not
have default database
The purpose of this task is to ensure that ALTER TABLE is atomic even if
the MariaDB server would be killed at any point of the alter table.
This means that either the ALTER TABLE succeeds (including that triggers,
the status tables and the binary log are updated) or things should be
reverted to their original state.
If the server crashes before the new version is fully up to date and
commited, it will revert to the original table and remove all
temporary files and tables.
If the new version is commited, crash recovery will use the new version,
and update triggers, the status tables and the binary log.
The one execption is ALTER TABLE .. RENAME .. where no changes are done
to table definition. This one will work as RENAME and roll back unless
the whole statement completed, including updating the binary log (if
enabled).
Other changes:
- Added handlerton->check_version() function to allow the ddl recovery
code to check, in case of inplace alter table, if the table in the
storage engine is of the new or old version.
- Added handler->table_version() so that an engine can report the current
version of the table. This should be changed each time the table
definition changes.
- Added ha_signal_ddl_recovery_done() and
handlerton::signal_ddl_recovery_done() to inform all handlers when
ddl recovery has been done. (Needed by InnoDB).
- Added handlerton call inplace_alter_table_committed, to signal engine
that ddl_log has been closed for the alter table query.
- Added new handerton flag
HTON_REQUIRES_NOTIFY_TABLEDEF_CHANGED_AFTER_COMMIT to signal when we
should call hton->notify_tabledef_changed() during
mysql_inplace_alter_table. This was required as MyRocks and InnoDB
needed the call at different times.
- Added function server_uuid_value() to be able to generate a temporary
xid when ddl recovery writes the query to the binary log. This is
needed to be able to handle crashes during ddl log recovery.
- Moved freeing of the frm definition to end of mysql_alter_table() to
remove duplicate code and have a common exit strategy.
-------
InnoDB part of atomic ALTER TABLE
(Implemented by Marko Mäkelä)
innodb_check_version(): Compare the saved dict_table_t::def_trx_id
to determine whether an ALTER TABLE operation was committed.
We must correctly recover dict_table_t::def_trx_id for this to work.
Before purge removes any trace of DB_TRX_ID from system tables, it
will make an effort to load the user table into the cache, so that
the dict_table_t::def_trx_id can be recovered.
ha_innobase::table_version(): return garbage, or the trx_id that would
be used for committing an ALTER TABLE operation.
In InnoDB, table names starting with #sql-ib will remain special:
they will be dropped on startup. This may be revisited later in
MDEV-18518 when we implement proper undo logging and rollback
for creating or dropping multiple tables in a transaction.
Table names starting with #sql will retain some special meaning:
dict_table_t::parse_name() will not consider such names for
MDL acquisition, and dict_table_rename_in_cache() will treat such
names specially when handling FOREIGN KEY constraints.
Simplify InnoDB DROP INDEX.
Prevent purge wakeup
To ensure that dict_table_t::def_trx_id will be recovered correctly
in case the server is killed before ddl_log_complete(), we will block
the purge of any history in SYS_TABLES, SYS_INDEXES, SYS_COLUMNS
between ha_innobase::commit_inplace_alter_table(commit=true)
(purge_sys.stop_SYS()) and purge_sys.resume_SYS().
The completion callback purge_sys.resume_SYS() must be between
ddl_log_complete() and MDL release.
--------
MyRocks support for atomic ALTER TABLE
(Implemented by Sergui Petrunia)
Implement these SE API functions:
- ha_rocksdb::table_version()
- hton->check_version = rocksdb_check_versionMyRocks data dictionary
now stores table version for each table.
(Absence of table version record is interpreted as table_version=0,
that is, which means no upgrade changes are needed)
- For inplace alter table of a partitioned table, call the underlying
handlerton when checking if the table is ok. This assumes that the
partition engine commits all changes at once.
The ROWNUM() function is for SELECT mapped to JOIN->accepted_rows, which is
incremented for each accepted rows.
For Filesort, update, insert, delete and load data, we map ROWNUM() to
internal variables incremented when the table is changed.
The connection between the row counter and Item_func_rownum is done
in sql_select.cc::fix_items_after_optimize() and
sql_insert.cc::fix_rownum_pointers()
When ROWNUM() is used anywhere in query, the optimization to ignore ORDER
BY in sub queries are disabled. This was done to get the following common
Oracle query to work:
select * from (select * from t1 order by a desc) as t where rownum() <= 2;
MDEV-3926 "Wrong result with GROUP BY ... WITH ROLLUP" contains a discussion
about this topic.
LIMIT optimization is enabled when in a top level WHERE clause comparing
ROWNUM() with a numerical constant using any of the following expressions:
- ROWNUM() < #
- ROWNUM() <= #
- ROWNUM() = 1
ROWNUM() can be also be the right argument to the comparison function.
LIMIT optimization is done in two cases:
- For the current sub query when the ROWNUM comparison is done on the top
level:
SELECT * from t1 WHERE rownum() <= 2 AND t1.a > 0
- For an inner sub query, when the upper level has only a ROWNUM comparison
in the WHERE clause:
SELECT * from (select * from t1) as t WHERE rownum() <= 2
In Oracle mode, one can also use ROWNUM without parentheses.
Other things:
- Fixed bug where the optimizer tries to optimize away sub queries
with RAND_TABLE_BIT set (non-deterministic queries). Now these
sub queries will not be converted to joins. This bug fix was also
needed to get rownum() working inside subqueries.
- In remove_const() remove setting simple_order to FALSE if ROLLUP is
USED. This code was disable a long time ago because of wrong assignment
in the following code. Instead we set simple_order to false if
RAND_TABLE_BIT was used in the SELECT list. This ensures that
we don't delete ORDER BY if the result set is not deterministic, like
in 'SELECT RAND() AS 'r' FROM t1 ORDER BY r';
- Updated parameters for Sort_param::init_for_filesort() to be able
to provide filesort with information where the number of accepted
rows should be stored
- Reordered fields in class Filesort to optimize storage layout
- Added new error messsage to tell that a function can't be used in HAVING
- Added field 'with_rownum' to THD to mark that ROWNUM() is used in the
query.
Co-author: Oleksandr Byelkin <sanja@mariadb.com>
LIMIT optimization for sub query
Changes:
- To detect automatic strlen() I removed the methods in String that
uses 'const char *' without a length:
- String::append(const char*)
- Binary_string(const char *str)
- String(const char *str, CHARSET_INFO *cs)
- append_for_single_quote(const char *)
All usage of append(const char*) is changed to either use
String::append(char), String::append(const char*, size_t length) or
String::append(LEX_CSTRING)
- Added STRING_WITH_LEN() around constant string arguments to
String::append()
- Added overflow argument to escape_string_for_mysql() and
escape_quotes_for_mysql() instead of returning (size_t) -1 on overflow.
This was needed as most usage of the above functions never tested the
result for -1 and would have given wrong results or crashes in case
of overflows.
- Added Item_func_or_sum::func_name_cstring(), which returns LEX_CSTRING.
Changed all Item_func::func_name()'s to func_name_cstring()'s.
The old Item_func_or_sum::func_name() is now an inline function that
returns func_name_cstring().str.
- Changed Item::mode_name() and Item::func_name_ext() to return
LEX_CSTRING.
- Changed for some functions the name argument from const char * to
to const LEX_CSTRING &:
- Item::Item_func_fix_attributes()
- Item::check_type_...()
- Type_std_attributes::agg_item_collations()
- Type_std_attributes::agg_item_set_converter()
- Type_std_attributes::agg_arg_charsets...()
- Type_handler_hybrid_field_type::aggregate_for_result()
- Type_handler_geometry::check_type_geom_or_binary()
- Type_handler::Item_func_or_sum_illegal_param()
- Predicant_to_list_comparator::add_value_skip_null()
- Predicant_to_list_comparator::add_value()
- cmp_item_row::prepare_comparators()
- cmp_item_row::aggregate_row_elements_for_comparison()
- Cursor_ref::print_func()
- Removes String_space() as it was only used in one cases and that
could be simplified to not use String_space(), thanks to the fixed
my_vsnprintf().
- Added some const LEX_CSTRING's for common strings:
- NULL_clex_str, DATA_clex_str, INDEX_clex_str.
- Changed primary_key_name to a LEX_CSTRING
- Renamed String::set_quick() to String::set_buffer_if_not_allocated() to
clarify what the function really does.
- Rename of protocol function:
bool store(const char *from, CHARSET_INFO *cs) to
bool store_string_or_null(const char *from, CHARSET_INFO *cs).
This was done to both clarify the difference between this 'store' function
and also to make it easier to find unoptimal usage of store() calls.
- Added Protocol::store(const LEX_CSTRING*, CHARSET_INFO*)
- Changed some 'const char*' arrays to instead be of type LEX_CSTRING.
- class Item_func_units now used LEX_CSTRING for name.
Other things:
- Fixed a bug in mysql.cc:construct_prompt() where a wrong escape character
in the prompt would cause some part of the prompt to be duplicated.
- Fixed a lot of instances where the length of the argument to
append is known or easily obtain but was not used.
- Removed some not needed 'virtual' definition for functions that was
inherited from the parent. I added override to these.
- Fixed Ordered_key::print() to preallocate needed buffer. Old code could
case memory overruns.
- Simplified some loops when adding char * to a String with delimiters.
This was done to simplify copying of with_* flags
Other things:
- Changed Flags to C++ enums, which enables gdb to print
out bit values for the flags. This also enables compiler
errors if one tries to manipulate a non existing bit in
a variable.
- Added set_maybe_null() as a shortcut as setting the
MAYBE_NULL flags was used in a LOT of places.
- Renamed PARAM flag to SP_VAR to ensure it's not confused with persistent
statement parameters.
