Remove table_count from Query_tables_list (not used, moved to MYSQL_LOCK).
Rename table_count from LEX to avoid mixing it with other counters of tables.
Cause: a copy of the joined TABLE_LIST is created during multi_update::prepare
and TABLE::pos_in_table_list of the tables are set to point to the new
TABLE_LIST object. This prevents some optimization steps to perform correctly.
Solution: do not update pos_in_table_list during multi_update::prepare
not every index-using plan sets bits in table->quick_keys.
QUICK_ROR_INTERSECT_SELECT, for example, doesn't.
Use the fact that select->quick is set instead.
Also allow EXPLAIN to work.
- Handle stored function conditions correctly, with the same logic as with UDFs.
- When running queries on Spider SE, by default, we do not push down WHERE conditions containing usage of UDFs/stored functions to remote data nodes, unless the user demands (by setting spider_use_pushdown_udf).
- Disable direct update/delete when a udf condition is skipped.
The columns that are part of DEFAULT expression were not read-marked
in statements like UPDATE...SET b=DEFAULT.
The problem is `F(DEFAULT)` expression depends of the left-hand side of an
assignment. However, setup_fields accepts only right-hand side value.
Neither Item::fix_fields does.
Suchwise, b=DEFAULT(b) works fine, because Item_default_field has
information on what field it is default of:
if (thd->mark_used_columns != MARK_COLUMNS_NONE)
def_field->default_value->expr->update_used_tables();
in Item_default_value::fix_fields().
It is not reasonable to pass a left-hand side to Item:fix_fields, because
the case is rare, so the rewrite
b= F(DEFAULT) -> b= F(DEFAULT(b))
is made instead.
Both UPDATE and multi-UPDATE are affected, however any form of INSERT
is not: it marks all the fields in DEFAULT expressions for read in
TABLE::mark_default_fields_for_write().
Reformulate mark_columns_used_by_index* function family in a more laconic
way:
mark_columns_used_by_index -> mark_index_columns
mark_columns_used_by_index_for_read_no_reset -> mark_index_columns_for_read
mark_columns_used_by_index_no_reset -> mark_index_columns_no_reset
static mark_index_columns -> do_mark_index_columns
Both EXPLAIN and EXPLAIN EXTENDED statements produce different results set
in case it is run in normal way and in PS mode for the statements
UPDATE/DELETE with subquery.
The use case below reproduces the issue:
MariaDB [test]> CREATE TABLE t1 (c1 INT KEY) ENGINE=MyISAM;
Query OK, 0 rows affected (0,128 sec)
MariaDB [test]> CREATE TABLE t2 (c2 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,023 sec)
MariaDB [test]> CREATE TABLE t3 (c3 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,021 sec)
MariaDB [test]> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | Impossible WHERE noticed after reading const tables
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,002 sec)
MariaDB [test]> PREPARE stmt FROM
-> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> EXECUTE stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | no matching row in const table |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,000 sec)
The reason by that different result sets are produced is that on execution
of the statement 'EXECUTE stmt' the flag SELECT_DESCRIBE not set
in the data member SELECT_LEX::options for instances of SELECT_LEX that
correspond to subqueries used in the UPDTAE/DELETE statements.
Initially, these flags were set on parsing the statement
PREPARE stmt FROM "EXPLAIN EXTENDED UPDATE t3 SET ..."
but latter they were reset before starting real execution of
the parsed query during handling the statement 'EXECUTE stmt';
So, to fix the issue the functions mysql_update()/mysql_delete()
have been modified to set the flag SELECT_DESCRIBE forcibly
in the data member SELECT_LEX::options for the primary SELECT_LEX
of the UPDATE/DELETE statement.
This commits replaces the call of the function setup_tables() with
a call of the function setup_tables_and_check_access() in the method
Multiupdate_prelocking_strategy::handle_end().
There is no known bug that would require this change. However the change
aligns this piece of code with the code existed before the patch for
MDEV-24823.
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
through 2nd execution of SP
This bug caused a server crash on the second call of any stored procedure
that contained an UPDATE statement over a multi-table view reporting an
error message at the prepare stage.
On the first call of the stored procedure after reporting an error at
the preparation stage of the UPDATE statement finished without calling
the function SELECT_LEX::save_prep_leaf_tables() for the SELECT used as
the definition of the view. This left the SELECT_LEX structure used by
the UPDATE statement in an inconsistent state for second call of the stored
procedure.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Add history row outside of compare_record() check. For TRX_ID
versioning we have to fail can_compare_record to force InnoDB update
which adds history row; and there in ha_innobase::update_row() is
additional "row changed" check where we force history row anyway.
in queries like
create view v1 as select 2 like 1 escape (3 in (select 0 union select 1));
select 2 union select * from v1;
Item_func_like::escape was left uninitialized, because
Item_in_optimizer is const_during_execution()
but not actually const_item() during execution.
It's not, because const subquery evaluation was disabled for derived.
Practically it only needs to be disabled for multi-update
that runs fix_fields() before all tables are locked.
is_bulk_op())' fails on UPDATE on a partitioned table with subquery
(MySQL:71630)
Analysis and fix: Error is not checked. So correct error state is not returned.
Fix: Check for error and return the error state.
Cause
Join tmp table inserts null row because of OUTER JOIN, that's
expected. Since `multi_update::prepare2()` converted
`Item_temptable_rowid` into `Item_field` (28dbdf3)
`multi_update::send_data()` accesses join tmp record directly and
treats it as a normal row ignoring null status of ref field. NULL ref
field is then treated as normal in `multi_update::do_updates()` which
tries to position updated table by reference 0.
Note that reference 0 may be valid reference and the first row of
table can be wrongly updated (see multi_update.test).
Fix
Do not add row into multi-update tmp table in case of null ref
field. Join tmp table does not have null_row status at this time (as
well as `STATUS_NULL_ROW`) and cannot be skipped by these properties
(see first comment in multi_update::send_data()). But it has all null
fields (including the ref field).
Wrong assertion condition. SYSTEM_TIME_ALL indicates that
vers_setup_conds() is done. In case FOR SYSTEM_TIME ALL is specified
in command the assertion passes but not checks anything.
Turn read cache off for update and multi-update for versioned
table. no_cache is reinited on each TABLE open because it is
applicable for specific algorithms.
As a side fix vers_insert_history_row() honors vers_write setting.
Aria with row_format=fixed uses IO_CACHE of type READ_CACHE for
sequential read in update loop. When history row is inserted inside
this loop the cache misses it and fails with error.
TODO:
Currently maria_extra() does not support SEQ_READ_APPEND. Probably it
might be possible to use this type of cache.
MDEV-18957 UPDATE with LIMIT clause is wrong for versioned partitioned tables
UPDATE, DELETE: replace linear search of current/historical records
with vers_setup_conds().
Additional DML cases in view.test
- Any temporary tables created under read-only mode will never be logged
to binary log. Any usage of these tables to update normal tables, even
after read-only has been disabled, will use row base logging (as the
temporary table will not be on the slave).
- Analyze, check and repair table will not be logged in read-only mode.
Other things:
- Removed not used varaibles in
MYSQL_BIN_LOG::flush_and_set_pending_rows_event.
- Set table_share->table_creation_was_logged for all normal tables.
- THD::binlog_query() now returns -1 if statement was not logged., This
is used to update table_share->table_creation_was_logged.
- Don't log admin statements in opt_readonly is set.
- Table's that doesn't have table_creation_was_logged will set binlog format to row
logging.
- Removed not needed/wrong setting of table->s->table_creation_was_logged
in create_table_from_items()
Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
after BEFORE triggers
on UPDATE, compare_record() was comparing all columns that are marked
for writing. But generated columns that are written to the table are
always deterministic and cannot change unless normal non-generated
columns were changed. So it's enough to compare only non-generated
columns that were explicitly assigned values in the SET clause.
* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time
don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"
as well as
MDEV-19500 Update with join stopped worked if there is a call to a procedure in a trigger
MDEV-19521 Update Table Fails with Trigger and Stored Function
MDEV-19497 Replication stops because table not found
MDEV-19527 UPDATE + JOIN + TRIGGERS = table doesn't exists error
Reimplement the fix for (5d510fdbf0)
MDEV-18507 can't update temporary table when joined with table with triggers on read-only
instead of calling open_tables() twice, put multi-update
prepare code inside open_tables() loop.
Add a test for a MDL backoff-and-retry loop inside open_tables()
across multi-update prepare code.
