Avoid starting transactions in wsrep-lib side when wsrep is
disabled. It is unnecessary, and causes spurious deadlock errors on
transaction clean up.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This patch also fixes:
MDEV-33050 Build-in schemas like oracle_schema are accent insensitive
MDEV-33084 LASTVAL(t1) and LASTVAL(T1) do not work well with lower-case-table-names=0
MDEV-33085 Tables T1 and t1 do not work well with ENGINE=CSV and lower-case-table-names=0
MDEV-33086 SHOW OPEN TABLES IN DB1 -- is case insensitive with lower-case-table-names=0
MDEV-33088 Cannot create triggers in the database `MYSQL`
MDEV-33103 LOCK TABLE t1 AS t2 -- alias is not case sensitive with lower-case-table-names=0
MDEV-33109 DROP DATABASE MYSQL -- does not drop SP with lower-case-table-names=0
MDEV-33110 HANDLER commands are case insensitive with lower-case-table-names=0
MDEV-33119 User is case insensitive in INFORMATION_SCHEMA.VIEWS
MDEV-33120 System log table names are case insensitive with lower-cast-table-names=0
- Removing the virtual function strnncoll() from MY_COLLATION_HANDLER
- Adding a wrapper function CHARSET_INFO::streq(), to compare
two strings for equality. For now it calls strnncoll() internally.
In the future it will turn into a virtual function.
- Adding new accent sensitive case insensitive collations:
- utf8mb4_general1400_as_ci
- utf8mb3_general1400_as_ci
They implement accent sensitive case insensitive comparison.
The weight of a character is equal to the code point of its
upper case variant. These collations use Unicode-14.0.0 casefolding data.
The result of
my_charset_utf8mb3_general1400_as_ci.strcoll()
is very close to the former
my_charset_utf8mb3_general_ci.strcasecmp()
There is only a difference in a couple dozen rare characters, because:
- the switch from "tolower" to "toupper" comparison, to make
utf8mb3_general1400_as_ci closer to utf8mb3_general_ci
- the switch from Unicode-3.0.0 to Unicode-14.0.0
This difference should be tolarable. See the list of affected
characters in the MDEV description.
Note, utf8mb4_general1400_as_ci correctly handles non-BMP characters!
Unlike utf8mb4_general_ci, it does not treat all BMP characters
as equal.
- Adding classes representing names of the file based database objects:
Lex_ident_db
Lex_ident_table
Lex_ident_trigger
Their comparison collation depends on the underlying
file system case sensitivity and on --lower-case-table-names
and can be either my_charset_bin or my_charset_utf8mb3_general1400_as_ci.
- Adding classes representing names of other database objects,
whose names have case insensitive comparison style,
using my_charset_utf8mb3_general1400_as_ci:
Lex_ident_column
Lex_ident_sys_var
Lex_ident_user_var
Lex_ident_sp_var
Lex_ident_ps
Lex_ident_i_s_table
Lex_ident_window
Lex_ident_func
Lex_ident_partition
Lex_ident_with_element
Lex_ident_rpl_filter
Lex_ident_master_info
Lex_ident_host
Lex_ident_locale
Lex_ident_plugin
Lex_ident_engine
Lex_ident_server
Lex_ident_savepoint
Lex_ident_charset
engine_option_value::Name
- All the mentioned Lex_ident_xxx classes implement a method streq():
if (ident1.streq(ident2))
do_equal();
This method works as a wrapper for CHARSET_INFO::streq().
- Changing a lot of "LEX_CSTRING name" to "Lex_ident_xxx name"
in class members and in function/method parameters.
- Replacing all calls like
system_charset_info->coll->strcasecmp(ident1, ident2)
to
ident1.streq(ident2)
- Taking advantage of the c++11 user defined literal operator
for LEX_CSTRING (see m_strings.h) and Lex_ident_xxx (see lex_ident.h)
data types. Use example:
const Lex_ident_column primary_key_name= "PRIMARY"_Lex_ident_column;
is now a shorter version of:
const Lex_ident_column primary_key_name=
Lex_ident_column({STRING_WITH_LEN("PRIMARY")});
Some fixes related to commit f838b2d799 and
Rows_log_event::do_apply_event() and Update_rows_log_event::do_exec_row()
for system-versioned tables were provided by Nikita Malyavin.
This was required by test versioning.rpl,trx_id,row.
This will makes it easier to find out what replication workers are
doing and what they are waiting for.
Things changed in processlist:
- Slave_SQL time was not consistent. Now time for state "Slave has
read all relay log; waiting for more updates" shows how long it has
waited for getting the next event.
- Slave_worker threads did often show "Closing tables" for a long
time. Now the state is reverted to the previous state after
"Closing tables" is done.
- Commit and Rollback states where not shown for replication (and some
other threads). Now Commit and Rollback states are always shown and
the state is reverted to previous state when the Commit/Rollback
have finished.
Code changes:
- Added thd->set_time_for_next_stage() for parallel replication when
when starting to wait for prior transactions to commit, group commit,
and FTWRL and for free space in thread pool.
Before we reset the time only after the above events.
- Moved THD_STAGE_INFO(stage_rollback) and THD_STAGE_INFO(stage_commit)
from sql_parse.cc to transaction.cc to ensure this is done for
all commits and not only 'normal connection queries'.
Test case changes:
- close_thread_tables() reverting stage to previous stage caused the
counter in performance_schema to be increased. In many case it is
the 'sql/starting' stage that was effected.
- We only change to "Commit" stage if there is a need for a commit.
This caused some "Commit" stages to disapper from perfschema reports.
TODO in 11.#:
- Slave_IO always showes "Waiting for master to send event" and the time is
from SLAVE START. We should in 11.# change this to be the time since
reading the last event.
Use standard handlerton functions for savepoint add/rollback.
To identify the savepoint, the pointer passed is used.
Every table that has online alter in progress maintains a list of
savepoints independently.
Also this removes setting a value to a global variable savepoint_alloc_size
without any protection, which was a race condition bug.
In MariaDB, we have a confusing problem where:
* The transaction_isolation option can be set in a configuration file, but it cannot be set dynamically.
* The tx_isolation system variable can be set dynamically, but it cannot be set in a configuration file.
Therefore, we have two different names for the same thing in different contexts. This is needlessly confusing, and it complicates the documentation. The same thing applys for transaction_read_only.
MySQL 5.7 solved this problem by making them into system variables. https://dev.mysql.com/doc/relnotes/mysql/5.7/en/news-5-7-20.html
This commit takes a similar approach by adding new system variables and marking the original ones as deprecated. This commit also resolves some legacy problems related to SET STATEMENT and transaction_isolation.
:: Syntax change ::
Keyword AUTO enables history partition auto-creation.
Examples:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 MONTH
STARTS '2021-01-01 00:00:00' AUTO PARTITIONS 12;
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME LIMIT 1000 AUTO;
Or with explicit partitions:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO
(PARTITION p0 HISTORY, PARTITION pn CURRENT);
To disable or enable auto-creation one can use ALTER TABLE by adding
or removing AUTO from partitioning specification:
CREATE TABLE t1 (x int) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
# Disables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR;
# Enables auto-creation:
ALTER TABLE t1 PARTITION BY SYSTEM_TIME INTERVAL 1 HOUR AUTO;
If the rest of partitioning specification is identical to CREATE TABLE
no repartitioning will be done (for details see MDEV-27328).
:: Description ::
Before executing history-generating DML command (see the list of commands below)
add N history partitions, so that N would be sufficient for potentially
generated history. N > 1 may be required when history partitions are switched
by INTERVAL and current_timestamp is N times further than the interval
boundary of the last history partition.
If the last history partition equals or exceeds LIMIT records then new history
partition is created and selected as the working partition. According to
MDEV-28411 partitions cannot be switched (or created) while the command is
running. Thus LIMIT does not carry strict limitation and the history partition
size must be planned as LIMIT value plus average number of history one DML
command can generate.
Auto-creation is implemented by synchronous fast_alter_partition_table() call
from the thread of the executed DML command before the command itself is run
(by the fallback and retry mechanism similar to Discovery feature,
see Open_table_context).
The name for newly added partitions are generated like default partition names
with extension of MDEV-22155 (which avoids name clashes by extending assignment
counter to next free-enough gap).
These DML commands can trigger auto-creation:
DELETE (including multitable DELETE, excluding DELETE HISTORY)
UPDATE (including multitable UPDATE)
REPLACE (including REPLACE .. SELECT)
INSERT .. ON DUPLICATE KEY UPDATE (including INSERT .. SELECT .. ODKU)
LOAD DATA .. REPLACE
:: Bug fixes ::
MDEV-23642 Locking timeout caused by auto-creation affects original DML
The reasons for this are:
- Do not disrupt main business process (the history is auxiliary service);
- Consequences are non-fatal (history is not lost, but comes into wrong
partition; fixed by partitioning rebuild);
- There is more freedom for application to fail in this case or not: it may
read warning info and find corresponding error number.
- While non-failing command is easy to handle by an application and fail it,
the opposite is hard to handle: there is no automatic actions to fix
failed command and retry, DBA intervention is required and until then
application is non-functioning.
MDEV-23639 Auto-create does not work under LOCK TABLES or inside triggers
Don't do tdc_remove_table() for OT_ADD_HISTORY_PARTITION because it is
not possible in locked tables mode.
LTM_LOCK_TABLES mode (and LTM_PRELOCKED_UNDER_LOCK_TABLES) works out
of the box as fast_alter_partition_table() can reopen tables via
locked_tables_list.
In LTM_PRELOCKED we reopen and relock table manually.
:: More fixes ::
* some_table_marked_for_reopen flag fix
some_table_marked_for_reopen affets only reopen of
m_locked_tables. I.e. Locked_tables_list::reopen_tables() reopens only
tables from m_locked_tables.
* Unused can_recover_from_failed_open() condition
Is recover_from_failed_open() can be really used after
open_and_process_routine()?
:: Reviewed by ::
Sergei Golubchik <serg@mariadb.org>
rename OPTION_KEEP_LOG -> OPTION_BINLOG_THIS_TRX.
Meaning: transaction cache will be written to binlog even on rollback.
convert log_current_statement to OPTION_BINLOG_THIS_STMT.
Meaning: the statement will be written to binlog (or trx binlog cache)
even if it normally wouldn't be.
setting OPTION_BINLOG_THIS_STMT must always set OPTION_BINLOG_THIS_TRX,
otherwise the statement won't be logged if the transaction is rolled back.
Use OPTION_BINLOG_THIS to set both.
This is a backport of 161e4bfafd.
trans_rollback_to_savepoint(): Only release metadata locks (MDL)
if the storage engines agree, after the changes were already rolled back.
Ever since commit 3792693f31
and mysql/mysql-server@55ceedbc3f
we used to cheat here and always release MDL if the binlog is disabled.
MDL are supposed to prevent race conditions between DML and DDL also
when no replication is in use. MDL are supposed to be a superset of
InnoDB table locks: InnoDB table lock may only exist if the thread
also holds MDL on the table name.
In the included test case, ROLLBACK TO SAVEPOINT would wrongly release
the MDL on both tables and let ALTER TABLE proceed, even though the DML
transaction is actually holding locks on the table.
Until commit 1bd681c8b3 (MDEV-25506)
in MariaDB 10.6, InnoDB would often work around the locking violation
in a blatantly non-ACID way: If locks exist on a table that is being
dropped (in this case, actually a partition of a table that is being
rebuilt by ALTER TABLE), InnoDB could move the table (or partition)
into a queue, to be dropped after the locks and references had been
released. If the lock is not released and the original copy of the
table not dropped quickly enough, a name conflict could occur on
a subsequent ALTER TABLE.
The scenario of commit 3792693f31
is unaffected by this fix, because mysqldump
would use non-locking reads, and the transaction would not be holding
any InnoDB locks during the execution of ROLLBACK TO SAVEPOINT.
MVCC reads inside InnoDB are only covered by MDL and page latches,
not by any table or record locks.
FIXME: It would be nice if storage engines were specifically asked
which MDL can be released, instead of only offering a choice
between all or nothing. InnoDB should be able to release any
locks for tables that are no longer in trx_t::mod_tables, except
if another transaction had converted some implicit record locks
to explicit ones, before the ROLLBACK TO SAVEPOINT had been completed.
Reviewed by: Sergei Golubchik
trans_rollback_to_savepoint(): Only release metadata locks (MDL)
if the storage engines agree, after the changes were already rolled back.
Ever since commit 3792693f31
and mysql/mysql-server@55ceedbc3f
we used to cheat here and always release MDL if the binlog is disabled.
MDL are supposed to prevent race conditions between DML and DDL also
when no replication is in use. MDL are supposed to be a superset of
InnoDB table locks: InnoDB table lock may only exist if the thread
also holds MDL on the table name.
In the included test case, ROLLBACK TO SAVEPOINT would wrongly release
the MDL on both tables and let ALTER TABLE proceed, even though the DML
transaction is actually holding locks on the table.
Until commit 1bd681c8b3 (MDEV-25506)
InnoDB worked around the locking violation in a blatantly non-ACID way:
If locks exist on a table that is being dropped (in this case, actually
a partition of a table that is being rebuilt by ALTER TABLE), InnoDB
would move the table (or partition) into a queue, to be dropped after
the locks and references had been released.
The scenario of commit 3792693f31
is unaffected by this fix, because mariadb-dump (a.k.a. mysqldump)
would use non-locking reads, and the transaction would not be holding
any InnoDB locks during the execution of ROLLBACK TO SAVEPOINT.
MVCC reads inside InnoDB are only covered by MDL and page latches,
not by any table or record locks.
FIXME: It would be nice if storage engines were specifically asked
which MDL can be released, instead of only offering a choice
between all or nothing. InnoDB should be able to release any
locks for tables that are no longer in trx_t::mod_tables, except
if another transaction had converted some implicit record locks
to explicit ones, before the ROLLBACK TO SAVEPOINT had been completed.
Reviewed by: Sergei Golubchik
The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.
For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
thd->release_transactional_locks(). The thd function will only call
the mdl_context function if there are no active transactional locks.
In 10.6 we will better fix where we will change the return value for
some trans_xxx() functions to indicate if transaction did close the
transaction or not. This will avoid the need of the indirect call.
Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
are doing additional work (like close_thread_tables) before calling
release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()
MDEV-22531 Remove maria::implicit_commit()
MDEV-22607 Assertion `ha_info->ht() != binlog_hton' failed in
MYSQL_BIN_LOG::unlog_xa_prepare
From the handler point of view, Aria now looks like a transactional
engine. One effect of this is that we don't need to call
maria::implicit_commit() anymore.
This change also forces the server to call trans_commit_stmt() after doing
any read or writes to system tables. This work will also make it easier
to later allow users to have system tables in other engines than Aria.
To handle the case that Aria doesn't support rollback, a new
handlerton flag, HTON_NO_ROLLBACK, was added to engines that has
transactions without rollback (for the moment only binlog and Aria).
Other things
- Moved freeing of MARIA_SHARE to a separate function as the MARIA_SHARE
can be still part of a transaction even if the table has closed.
- Changed Aria checkpoint to use the new MARIA_SHARE free function. This
fixes a possible memory leak when using S3 tables
- Changed testing of binlog_hton to instead test for HTON_NO_ROLLBACK
- Removed checking of has_transaction_manager() in handler.cc as we can
assume that as the transaction was started by the engine, it does
support transactions.
- Added new class 'start_new_trans' that can be used to start indepdendent
sub transactions, for example while reading mysql.proc, using help or
status tables etc.
- open_system_tables...() and open_proc_table_for_Read() doesn't anymore
take a Open_tables_backup list. This is now handled by 'start_new_trans'.
- Split thd::has_transactions() to thd::has_transactions() and
thd::has_transactions_and_rollback()
- Added handlerton code to free cached transactions objects.
Needed by InnoDB.
squash! 2ed35999f2a2d84f1c786a21ade5db716b6f1bbc
All changes (except one) is of type
thd->transaction. -> thd->transaction->
thd->transaction points by default to 'thd->default_transaction'
This allows us to 'easily' have multiple active transactions for a
THD object, like when reading data from the mysql.proc table
When binlog is disabled, WSREP will not behave correctly when
SAVEPOINT ROLLBACK is executed since we don't register handlers for such case.
Fixed by registering WSREP handlerton for SAVEPOINT related commands.
MDEV-21605 Clean up and speed up interfaces for binary row logging
MDEV-21617 Bug fix for previous version of this code
The intention is to have as few 'if' as possible in ha_write() and
related functions. This is done by pre-calculating once per statement the
row_logging state for all tables.
Benefits are simpler and faster code both when binary logging is disabled
and when it's enabled.
Changes:
- Added handler->row_logging to make it easy to check it table should be
row logged. This also made it easier to disabling row logging for system,
internal and temporary tables.
- The tables row_logging capabilities are checked once per "statements
that updates tables" in THD::binlog_prepare_for_row_logging() which
is called when needed from THD::decide_logging_format().
- Removed most usage of tmp_disable_binlog(), reenable_binlog() and
temporary saving and setting of thd->variables.option_bits.
- Moved checks that can't change during a statement from
check_table_binlog_row_based() to check_table_binlog_row_based_internal()
- Removed flag row_already_logged (used by sequence engine)
- Moved binlog_log_row() to a handler::
- Moved write_locked_table_maps() to THD::binlog_write_table_maps() as
most other related binlog functions are in THD.
- Removed binlog_write_table_map() and binlog_log_row_internal() as
they are now obsolete as 'has_transactions()' is pre-calculated in
prepare_for_row_logging().
- Remove 'is_transactional' argument from binlog_write_table_map() as this
can now be read from handler.
- Changed order of 'if's in handler::external_lock() and wsrep_mysqld.h
to first evaluate fast and likely cases before more complex ones.
- Added error checking in ha_write_row() and related functions if
binlog_log_row() failed.
- Don't clear check_table_binlog_row_based_result in
clear_cached_table_binlog_row_based_flag() as it's not needed.
- THD::clear_binlog_table_maps() has been replaced with
THD::reset_binlog_for_next_statement()
- Added 'MYSQL_OPEN_IGNORE_LOGGING_FORMAT' flag to open_and_lock_tables()
to avoid calculating of binary log format for internal opens. This flag
is also used to avoid reading statistics tables for internal tables.
- Added OPTION_BINLOG_LOG_OFF as a simple way to turn of binlog temporary
for create (instead of using THD::sql_log_bin_off.
- Removed flag THD::sql_log_bin_off (not needed anymore)
- Speed up THD::decide_logging_format() by remembering if blackhole engine
is used and avoid a loop over all tables if it's not used
(the common case).
- THD::decide_logging_format() is not called anymore if no tables are used
for the statement. This will speed up pure stored procedure code with
about 5%+ according to some simple tests.
- We now get annotated events on slave if a CREATE ... SELECT statement
is transformed on the slave from statement to row logging.
- In the original code, the master could come into a state where row
logging is enforced for all future events if statement could be used.
This is now partly fixed.
Other changes:
- Ensure that all tables used by a statement has query_id set.
- Had to restore the row_logging flag for not used tables in
THD::binlog_write_table_maps (not normal scenario)
- Removed injector::transaction::use_table(server_id_type sid, table tbl)
as it's not used.
- Cleaned up set_slave_thread_options()
- Some more DBUG_ENTER/DBUG_RETURN, code comments and minor indentation
changes.
- Ensure we only call THD::decide_logging_format_low() once in
mysql_insert() (inefficiency).
- Don't annotate INSERT DELAYED
- Removed zeroing pos_in_table_list in THD::open_temporary_table() as it's
already 0
