This task is to ensure we have a clear definition and rules of how to
repair or optimize a table.
The rules are:
- REPAIR should be used with tables that are crashed and are
unreadable (hardware issues with not readable blocks, blocks with
'unexpected data' etc)
- OPTIMIZE table should be used to optimize the storage layout for the
table (recover space for delete rows and optimize the index
structure.
- ALTER TABLE table_name FORCE should be used to rebuild the .frm file
(the table definition) and the table (with the original table row
format). If the table is from and older MariaDB/MySQL release with a
different storage format, it will convert the data to the new
format. ALTER TABLE ... FORCE is used as part of mariadb-upgrade
Here follows some more background:
The 3 ways to repair a table are:
1) ALTER TABLE table_name FORCE" (not other options).
As an alias we allow: "ALTER TABLE table_name ENGINE=original_engine"
2) "REPAIR TABLE" (without FORCE)
3) "OPTIMIZE TABLE"
All of the above commands will optimize row space usage (which means that
space will be needed to hold a temporary copy of the table) and
re-generate all indexes. They will also try to replicate the original
table definition as exact as possible.
For ALTER TABLE and "REPAIR TABLE without FORCE", the following will hold:
If the table is from an older MariaDB version and data conversion is
needed (for example for old type HASH columns, MySQL JSON type or new
TIMESTAMP format) "ALTER TABLE table_name FORCE, algorithm=COPY" will be
used.
The differences between the algorithms are
1) Will use the fastest algorithm the engine supports to do a full repair
of the table (except if data conversions are is needed).
2) Will use the storage engine internal REPAIR facility (MyISAM, Aria).
If the engine does not support REPAIR then
"ALTER TABLE FORCE, ALGORITHM=COPY" will be used.
If there was data incompatibilities (which means that FORCE was used)
then there will be a warning after REPAIR that ALTER TABLE FORCE is
still needed.
The reason for this is that REPAIR may be able to go around data
errors (wrong incompatible data, crashed or unreadable sectors) that
ALTER TABLE cannot do.
3) Will use the storage engine internal OPTIMIZE. If engine does not
support optimize, then "ALTER TABLE FORCE" is used.
The above will ensure that ALTER TABLE FORCE is able to
correct almost any errors in the row or index data. In case of
corrupted blocks then REPAIR possible followed by ALTER TABLE is needed.
This is important as mariadb-upgrade executes ALTER TABLE table_name
FORCE for any table that must be re-created.
Bugs fixed with InnoDB tables when using ALTER TABLE FORCE:
- No error for INNODB_DEFAULT_ROW_FORMAT=COMPACT even if row length
would be too wide. (Independent of innodb_strict_mode).
- Tables using symlinks will be symlinked after any of the above commands
(Independent of the setting of --symbolic-links)
If one specifies an algorithm together with ALTER TABLE FORCE, things
will work as before (except if data conversion is required as then
the COPY algorithm is enforced).
ALTER TABLE .. OPTIMIZE ALL PARTITIONS will work as before.
Other things:
- FORCE argument added to REPAIR to allow one to first run internal
repair to fix damaged blocks and then follow it with ALTER TABLE.
- REPAIR will not update frm_version if ha_check_for_upgrade() finds
that table is still incompatible with current version. In this case the
REPAIR will end with an error.
- REPAIR for storage engines that does not have native repair, like InnoDB,
is now using ALTER TABLE FORCE.
- REPAIR csv-table USE_FRM now works.
- It did not work before as CSV tables had extension list in wrong
order.
- Default error messages length for %M increased from 128 to 256 to not
cut information from REPAIR.
- Documented HA_ADMIN_XX variables related to repair.
- Added HA_ADMIN_NEEDS_DATA_CONVERSION to signal that we have to
do data conversions when converting the table (and thus ALTER TABLE
copy algorithm is needed).
- Fixed typo in error message (caused test changes).
This patch also fixes:
MDEV-33050 Build-in schemas like oracle_schema are accent insensitive
MDEV-33084 LASTVAL(t1) and LASTVAL(T1) do not work well with lower-case-table-names=0
MDEV-33085 Tables T1 and t1 do not work well with ENGINE=CSV and lower-case-table-names=0
MDEV-33086 SHOW OPEN TABLES IN DB1 -- is case insensitive with lower-case-table-names=0
MDEV-33088 Cannot create triggers in the database `MYSQL`
MDEV-33103 LOCK TABLE t1 AS t2 -- alias is not case sensitive with lower-case-table-names=0
MDEV-33109 DROP DATABASE MYSQL -- does not drop SP with lower-case-table-names=0
MDEV-33110 HANDLER commands are case insensitive with lower-case-table-names=0
MDEV-33119 User is case insensitive in INFORMATION_SCHEMA.VIEWS
MDEV-33120 System log table names are case insensitive with lower-cast-table-names=0
- Removing the virtual function strnncoll() from MY_COLLATION_HANDLER
- Adding a wrapper function CHARSET_INFO::streq(), to compare
two strings for equality. For now it calls strnncoll() internally.
In the future it will turn into a virtual function.
- Adding new accent sensitive case insensitive collations:
- utf8mb4_general1400_as_ci
- utf8mb3_general1400_as_ci
They implement accent sensitive case insensitive comparison.
The weight of a character is equal to the code point of its
upper case variant. These collations use Unicode-14.0.0 casefolding data.
The result of
my_charset_utf8mb3_general1400_as_ci.strcoll()
is very close to the former
my_charset_utf8mb3_general_ci.strcasecmp()
There is only a difference in a couple dozen rare characters, because:
- the switch from "tolower" to "toupper" comparison, to make
utf8mb3_general1400_as_ci closer to utf8mb3_general_ci
- the switch from Unicode-3.0.0 to Unicode-14.0.0
This difference should be tolarable. See the list of affected
characters in the MDEV description.
Note, utf8mb4_general1400_as_ci correctly handles non-BMP characters!
Unlike utf8mb4_general_ci, it does not treat all BMP characters
as equal.
- Adding classes representing names of the file based database objects:
Lex_ident_db
Lex_ident_table
Lex_ident_trigger
Their comparison collation depends on the underlying
file system case sensitivity and on --lower-case-table-names
and can be either my_charset_bin or my_charset_utf8mb3_general1400_as_ci.
- Adding classes representing names of other database objects,
whose names have case insensitive comparison style,
using my_charset_utf8mb3_general1400_as_ci:
Lex_ident_column
Lex_ident_sys_var
Lex_ident_user_var
Lex_ident_sp_var
Lex_ident_ps
Lex_ident_i_s_table
Lex_ident_window
Lex_ident_func
Lex_ident_partition
Lex_ident_with_element
Lex_ident_rpl_filter
Lex_ident_master_info
Lex_ident_host
Lex_ident_locale
Lex_ident_plugin
Lex_ident_engine
Lex_ident_server
Lex_ident_savepoint
Lex_ident_charset
engine_option_value::Name
- All the mentioned Lex_ident_xxx classes implement a method streq():
if (ident1.streq(ident2))
do_equal();
This method works as a wrapper for CHARSET_INFO::streq().
- Changing a lot of "LEX_CSTRING name" to "Lex_ident_xxx name"
in class members and in function/method parameters.
- Replacing all calls like
system_charset_info->coll->strcasecmp(ident1, ident2)
to
ident1.streq(ident2)
- Taking advantage of the c++11 user defined literal operator
for LEX_CSTRING (see m_strings.h) and Lex_ident_xxx (see lex_ident.h)
data types. Use example:
const Lex_ident_column primary_key_name= "PRIMARY"_Lex_ident_column;
is now a shorter version of:
const Lex_ident_column primary_key_name=
Lex_ident_column({STRING_WITH_LEN("PRIMARY")});
If a query contained a CTE whose name coincided with the name of one of
the base tables used in the specification of the CTE and the query had at
least two references to this CTE in the specifications of other CTEs then
processing of the query led to unlimited recursion that ultimately caused
a crash of the server.
Any secondary non-recursive reference to a CTE requires creation of a copy
of the CTE specification. All the references to CTEs in this copy must be
resolved. If the specification contains a reference to a base table whose
name coincides with the name of then CTE then it should be ensured that
this reference in no way can be resolved against the name of the CTE.
This patch is actually follow-up for the task
MDEV-23902: MariaDB crash on calling function
to use correct query arena for a statement. In case invocation of
a function is in progress use its call arena, else use current
query arena that can be either a statement or a regular query arena.
The crash happened with an indexed virtual column whose
value is evaluated using a function that has a different meaning
in sql_mode='' vs sql_mode=ORACLE:
- DECODE()
- LTRIM()
- RTRIM()
- LPAD()
- RPAD()
- REPLACE()
- SUBSTR()
For example:
CREATE TABLE t1 (
b VARCHAR(1),
g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL,
KEY g(g)
);
So far we had replacement XXX_ORACLE() functions for all mentioned function,
e.g. SUBSTR_ORACLE() for SUBSTR(). So it was possible to correctly re-parse
SUBSTR_ORACLE() even in sql_mode=''.
But it was not possible to re-parse the MariaDB version of SUBSTR()
after switching to sql_mode=ORACLE. It was erroneously mis-interpreted
as SUBSTR_ORACLE().
As a result, this combination worked fine:
SET sql_mode=ORACLE;
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode='';
INSERT ...
But the other way around it crashed:
SET sql_mode='';
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode=ORACLE;
INSERT ...
At CREATE time, SUBSTR was instantiated as Item_func_substr and printed
in the FRM file as substr(). At re-open time with sql_mode=ORACLE, "substr()"
was erroneously instantiated as Item_func_substr_oracle.
Fix:
The fix proposes a symmetric solution. It provides a way to re-parse reliably
all sql_mode dependent functions to their original CREATE TABLE time meaning,
no matter what the open-time sql_mode is.
We take advantage of the same idea we previously used to resolve sql_mode
dependent data types.
Now all sql_mode dependent functions are printed by SHOW using a schema
qualifier when the current sql_mode differs from the function sql_mode:
SET sql_mode='';
CREATE TABLE t1 ... SUBSTR(a,b,c) ..;
SET sql_mode=ORACLE;
SHOW CREATE TABLE t1; -> mariadb_schema.substr(a,b,c)
SET sql_mode=ORACLE;
CREATE TABLE t2 ... SUBSTR(a,b,c) ..;
SET sql_mode='';
SHOW CREATE TABLE t1; -> oracle_schema.substr(a,b,c)
Old replacement names like substr_oracle() are still understood for
backward compatibility and used in FRM files (for downgrade compatibility),
but they are not printed by SHOW any more.
- Moved view checks after privilege tables are fixed. This is to avoid
warnings about wrongly defined mysql.proc when checking views.
- Don't use stat tables before they have been fixed.
- Don't run mysql_fix_view() if 'FOR MYSQL' is used if the view is
already a MariaDB view.
- Added 'FOR UPGRADE' as an option for 'REPAIR VIEW' to be able to
detect if the REPAIR command comes from mariadb_upgrade. In this
case we get a warning, instead of an error, if a definer of a view
does not exists.
This bug could cause a crash of the server when processing a query with
ROWNUM() if it used in its FROM list a reference to a mergeable view
defined as SELECT over more than one table that contained ORDER BY clause.
When a mergeable view with ORDER BY clause and without LIMIT clause is used
in the FROM list of a query that does not have ORDER BY clause the ORDER BY
clause of the view is moved to the query. The code that performed this
transformation forgot to delete the moved ORDER BY list from the view.
If a query contains ROWNUM() and uses a mergeable multi-table view with
ORDER BY then according to the current code of TABLE_LIST::init_derived()
the view has to be forcibly materialized. As the query and the view shared
the same items in its ORDER BY lists they could not be properly resolved
either in the query or in the view. This led to a crash of the server.
This patch has returned back the original signature of LEX::can_not_use_merged()
to comply with 10.4 code of the condition that checks whether a megeable
view has to be forcibly materialized.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Subselect_single_value_engine cannot handle table value constructor used as
subquery. That's why any table value constructor TVC used as subquery is
converted into a select over derived table whose specification is TVC.
Currently the names of the columns of the derived table DT are taken from
the first element of TVC and if the k-th component of the element happens
to be a subquery the text representation of this subquery serves as the
name of the k-th column of the derived table. References of all columns of
the derived table DT compose the select list of the result of the conversion.
If a definition of a view contained a table value constructor used as a
subquery and the view was registered after this conversion had been
applied we could register an invalid view definition if the first element
of TVC contained a subquery as its component: the name of this component
was taken from the original subquery, while the name of the corresponding
column of the derived table was taken from the text representation of the
subquery produced by the function SELECT_LEX::print() and these names were
usually differ from each other.
To avoid registration of such invalid views the function SELECT_LEX::print()
now prints the original TVC instead of the select in which this TVC has
been wrapped. Now the specification of registered view looks like as if no
conversions from TVC to selects were done.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Specifically:
Revert "MDEV-29664 Assertion `!n_mysql_tables_in_use' failed in innobase_close_connection"
This reverts commit ba875e9396.
Revert "MDEV-29620 Assertion `next_insert_id == 0' failed in handler::ha_external_lock"
This reverts commit aa08a7442a.
Revert "MDEV-29628 Memory leak after CREATE OR REPLACE with foreign key"
This reverts commit c579d66ba6.
Revert "MDEV-29609 create_not_windows test fails with different result"
This reverts commit cb583b2f1b.
Revert "MDEV-29544 SIGSEGV in HA_CREATE_INFO::finalize_locked_tables"
This reverts commit dcd66c3814.
Revert "MDEV-28933 CREATE OR REPLACE fails to recreate same constraint name"
This reverts commit cf6c517632.
Revert "MDEV-28933 Moved RENAME_CONSTRAINT_IDS to include/sql_funcs.h"
This reverts commit f1e1c1335b.
Revert "MDEV-28956 Locking is broken if CREATE OR REPLACE fails under LOCK TABLES"
This reverts commit a228ec80e3.
Revert "MDEV-25292 gcol.gcol_bugfixes --ps fix"
This reverts commit 24fff8267d.
Revert "MDEV-25292 Disable atomic replace for slave-generated or-replace"
This reverts commit 2af15914cb.
Revert "MDEV-25292 backup_log improved"
This reverts commit 34398a20b5.
Revert "MDEV-25292 Atomic CREATE OR REPLACE TABLE"
This reverts commit 93c8252f02.
Revert "MDEV-25292 Table_name class for (db, table_name, alias)"
This reverts commit d145dda9c7.
Revert "MDEV-25292 ha_table_exists() cleanup and improvement"
This reverts commit 409b8a86de.
Revert "MDEV-25292 Cleanups"
This reverts commit 595dad83ad.
Revert "MDEV-25292 Refactoring: moved select_field_count into Alter_info."
This reverts commit f02af1d229.
To prevent ASAN heap-use-after-poison in the MDEV-16549 part of
./mtr --repeat=6 main.derived
the initialization of Name_resolution_context was cleaned up.
Read the version of the view share when we read definition to prevent
simultaniouse access to a view table SHARE (and so its MEM_ROOT)
from different threads.
The problem is that if table definition cache (TDC) is full of real tables
which are in tables cache, view definition can not stay there so will be
removed by its own underlying tables.
In situation above old mechanism of detection matching definition in PS
and current version always require reprepare and so prevent executing
the PS.
One work around is to increase TDC, other - improve version check for
views/triggers (which is done here). Now in suspicious cases we check:
- timestamp (microseconds) of the view to be sure that version really
have changed;
- time (microseconds) of creation of a trigger related to time
(microseconds) of statement preparation.
- Added missing information about database of corresponding table for various types of commands
- Update some typos
- Reviewed by: <vicentiu@mariadb.org>
Making changes to wsrep_mysqld.h causes large parts of server code to
be recompiled. The reason is that wsrep_mysqld.h is included by
sql_class.h, even tough very little of wsrep_mysqld.h is needed in
sql_class.h. This commit introduces a new header file, wsrep_on.h,
which is meant to be included from sql_class.h, and contains only
macros and variable declarations used to determine whether wsrep is
enabled.
Also, header wsrep.h should only contain definitions that are also
used outside of sql/. Therefore, move WSREP_TO_ISOLATION* and
WSREP_SYNC_WAIT macros to wsrep_mysqld.h.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
