The problem was that the COM_STMT_SEND_LONG_DATA was sending a response
packet if the prepared statement wasn't found in the server (due to
reconnection). The commands COM_STMT_SEND_LONG_DATA and COM_STMT_CLOSE
should not send any packets, even error packets should not be sent since
they are not expected by the client API.
The solution is to clear generated during the execution of the aforementioned
commands and to skip resend of prepared statement commands. Another fix is
that if the connection breaks during the send of prepared statement command,
the command is not sent again since the prepared statement is no longer in the
server.
sporadically
Under some circumstances, the mysql_insert_id() value after SELECT ...
INSERT could return a wrong value. This could happen when the last
SELECT ... INSERT did not involve an AUTO_INCREMENT column, but the
value of mysql_insert_id() was changed by some previous statements.
Fixed by checking the value of thd->insert_id_used in
select_insert::send_eof() and returning 0 for mysql_insert_id() if it
is not set.
Executing a prepared statement associated with a materialized
cursor yields to the client a metadata packet with wrong table
and database names. The problem was occurring because the server
was sending the the name of the temporary table used by the cursor
instead of the table name of the original table. The same problem
occurs when selecting from views, in which case the table name was
being sent and not the name of the view.
The solution is to fill the list item from the temporary table but
preserving the table and database names of the original fields. This
is achieved by tweaking the Select_materialize to accept a pointer to
the Materialized_cursor class which contains the item list to be filled.
server status wasn't properly sent to the client after the error
by the embedded server. Wasn't noticed before as one usually stopped
retrieving results after he gets an error.
insert ... select.
The 5.0 manual page for mysql_insert_id() does not mention anything
about INSERT ... SELECT, though its current behavior is incosistent
with what the manual says about the plain INSERT.
Fixed by changing the AUTO_INCREMENT and mysql_insert_id() handling
logic in INSERT ... SELECT to be consistent with the INSERT behavior,
the manual, and the changes in 5.1 introduced by WL3146:
- mysql_insert_id() now returns the first automatically generated
AUTO_INCREMENT value that was successfully inserted by INSERT ... SELECT
- if an INSERT ... SELECT statement is executed, and no automatically
generated value is successfully inserted, mysql_insert_id() now returns
the ID of the last inserted row.
only on some occasions
Referencing an element from the SELECT list in a WHERE
clause is not permitted. The namespace of the WHERE
clause is the table columns only. This was not enforced
correctly when resolving outer references in sub-queries.
Fixed by not allowing references to aliases in a
sub-query in WHERE.
crashes.
MySQL distributions contain a number of programs that are used only by
the MySQL test suite internally, i.e. they are not indended to be
invoked directly by a user. As a result, such programs are not
documented, do not have any built-in help or proper error reporting,
which may confuse users.
This patch fixes the problem with the following changes:
- mytest, libmysqltest and all references to them were removed from the
distribution since they are not used anymore
- bug25714 now displays an error message when run with incorrect
arguments or with the --help option
- mysql_client_test now does not call abort() in case of errors,
instead it does a clean exit() with a proper error status.
The problem is that when copying the supplied username and
database, no bounds checking is performed on the fixed-length
buffer. A sufficiently large (> 512) user string can easily
cause stack corruption. Since this API can be used from PHP
and other programs, this is a serious problem.
The solution is to increase the buffer size to the accepted
size in similar functions and perform bounds checking when
copying the username and database.
The change_to_use_tmp_fields function leaves the orig_table member of an
expression's tmp table field filled for the new Item_field being created.
Later orig_table is used by the Field::make_field function to provide some
info about original table and field name to a user. This is ok for a field
but for an expression it should be empty.
The change_to_use_tmp_fields function now resets orig_table member of
an expression's tmp table field to prevent providing a wrong info to a user.
The Field::make_field function now resets the table_name and the org_col_name
variables when the orig_table is set to 0.
make sure that if builder configured with a non-standard (!= 3306)
default TCP port that value actually gets used throughout. if they
didn't configure a value, assume "use a sensible default", which
will be read from /etc/services or, failing that, from the factory
default. That makes the order of preference
- command-line option
- my.cnf, where applicable
- $MYSQL_TCP_PORT environment variable
- /etc/services (unless configured --with-tcp-port)
- default port (--with-tcp-port=... or factory default)
The cli_read_binary_rows function is used to fetch data from the server
after a prepared statement execution. It accepts a statement handler and gets
the connection handler from it. But when the auto-reconnect option is set
the connection handler is reset to NULL after reconnection because the
prepared statement is lost and the handler became useless. This case
wasn't checked in the cli_read_binary_rows function and caused server crash.
Now the cli_read_binary_rows function checks the connection handler to be
not NULL and returns an error if it is.
VIEW".
mysql_list_fields() C API function would incorrectly set MYSQL_FIELD::decimals
member for some view columns.
The problem was in an incomplete implementation of
Item_ident_for_show::make_field(), which is responsible for view
columns metadata.
Aligned client library build and use with the Unix version when it
comes to what source to include directly in the builds, and what
libraries to link with (bug#30118).
Also reviewed, corrected and made more clear when static or dynamic
Thread Local Storage is to be used. Some code duplication was removed,
and some redundant library usage were removed, reducing the risk of
incorrect TLS usage.
"getGeneratedKeys() does not work with FEDERATED table"
mysql_insert() expected the storage engine to update the row data
during the write_row() operation with the value of the new auto-
increment field. The field must be updated when only one row has
been inserted as mysql_insert() would ignore the thd->last_insert.
This patch implements HA_STATUS_AUTO support in ha_federated::info()
and ensures that ha_federated::write_row() does update the row's
auto-increment value.
The test case was written in C as the protocol's 'id' value is
accessible through libmysqlclient and not via SQL statements.
mysql-test-run.pl was extended to enable running the test binary.
Sometimes a parameter slot may not get a value because of the protocol
data being plain wrong.
Such cases should be detected and handled by returning an error.
Fixed by checking data stream constraints where possible (like maximum
length) and reacting to the case where a value cannot be constructed.
flag is set.
When the CLIENT_FOUND_ROWS flag is set then the server should return
found number of rows independently whether they were updated or not.
But this wasn't the case for the INSERT statement which always returned
number of rows that were actually changed thus providing wrong info to
the user.
Now the select_insert::send_eof method and the mysql_insert function
are sending the number of touched rows if the CLIENT_FOUND_ROWS flag is set.
The root cause of this bug is related to the function skip_rear_comments,
in sql_lex.cc
Recent code changes in skip_rear_comments changed the prototype from
"const uchar*" to "const char*", which had an unforseen impact on this test:
(endp[-1] < ' ')
With unsigned characters, this code filters bytes of value [0x00 - 0x20]
With *signed* characters, this also filters bytes of value [0x80 - 0xFF].
This caused the regression reported, considering cyrillic characters in the
parameter name to be whitespace, and truncated.
Note that the regression is present both in 5.0 and 5.1.
With this fix:
- [0x80 - 0xFF] bytes are no longer considered whitespace.
This alone fixes the regression.
In addition, filtering [0x00 - 0x20] was found bogus and abusive,
so that the code now filters uses my_isspace when looking for whitespace.
Note that this fix is only addressing the regression affecting UTF-8
in general, but does not address a more fundamental problem with
skip_rear_comments: parsing a string *backwards*, starting at end[-1],
is not safe with multi-bytes characters, so that end[-1] can confuse the
last byte of a multi-byte characters with a characters to filter out.
The only known impact of this remaining issue affects objects that have to
meet all the conditions below:
- the object is a FUNCTION / PROCEDURE / TRIGGER / EVENT / VIEW
- the body consist of only *1* instruction, and does *not* contain a
BEGIN-END block
- the instruction ends, lexically, with <ident> <whitespace>* ';'?
For example, "select <ident>;" or "return <ident>;"
- The last character of <ident> is a multi-byte character
- the last byte of this character is ';' '*', '/' or whitespace
In this case, the body of the object will be truncated after parsing,
and stored in an invalid format.
This last issue has not been fixed in this patch, since the real fix
will be implemented by Bug 25411 (trigger code truncated), which is caused
by the very same code.
The real problem is that the function skip_rear_comments is only a
work-around, and should be removed entirely: see the proposed patch for
bug 25411 for details.
DATE and DATETIME can be compared either as strings or as int. Both
methods have their disadvantages. Strings can contain valid DATETIME value
but have insignificant zeros omitted thus became non-comparable with
other DATETIME strings. The comparison as int usually will require conversion
from the string representation and the automatic conversion in most cases is
carried out in a wrong way thus producing wrong comparison result. Another
problem occurs when one tries to compare DATE field with a DATETIME constant.
The constant is converted to DATE losing its precision i.e. losing time part.
This fix addresses the problems described above by adding a special
DATE/DATETIME comparator. The comparator correctly converts DATE/DATETIME
string values to int when it's necessary, adds zero time part (00:00:00)
to DATE values to compare them correctly to DATETIME values. Due to correct
conversion malformed DATETIME string values are correctly compared to other
DATE/DATETIME values.
As of this patch a DATE value equals to DATETIME value with zero time part.
For example '2001-01-01' equals to '2001-01-01 00:00:00'.
The compare_datetime() function is added to the Arg_comparator class.
It implements the correct comparator for DATE/DATETIME values.
Two supplementary functions called get_date_from_str() and get_datetime_value()
are added. The first one extracts DATE/DATETIME value from a string and the
second one retrieves the correct DATE/DATETIME value from an item.
The new Arg_comparator::can_compare_as_dates() function is added and used
to check whether two given items can be compared by the compare_datetime()
comparator.
Two caching variables were added to the Arg_comparator class to speedup the
DATE/DATETIME comparison.
One more store() method was added to the Item_cache_int class to cache int
values.
The new is_datetime() function was added to the Item class. It indicates
whether the item returns a DATE/DATETIME value.
