* comments
* cosmetic changes, *(ptr+5) -> ptr[5]
* a couple of trivial functions -> inline
* remove unused argument from pack_header()
* create_frm() no longer creates frm file (the function used to prepare and
fill a memory buffer and call my_create at the end. Now it only prepares
a memory buffer). Renamed accordingly.
* don't call pack_screen twice, go for a smaller screen area in the first attempt
* remove useless calls to check_duplicate_warning()
* don't write unireg screens to .frm files
* remove make_new_entry(), it's basically dead code, always calculating
and writing into frm the same string value. replace the function call
with the constant string.
* print "table doesn't exist in engine" when a table doesn't exist in the engine,
instead of "file not found" (if no file was involved)
* print a complete filename that cannot be found ('t1.MYI', not 't1')
* it's not an error for a DROP if a table doesn't exist in the engine (or some table
files cannot be found) - if the DROP succeeded regardless
after all engines have discovered their tables
side effect: correct alphabetical sorting as in ORDER BY ... COLLATE utf8_bin,
information_schema is no longer the first after find_files(),
tables like #mysql50#zzz are sorted first (as per table name),
not last (as per file name zzz).
Replace CHANGE MASTER TO ... master_gtid_pos='xxx' with a new system
variable @@global.gtid_pos.
This is more logical; @@gtid_pos is global, not per-master, and it is not
affected by RESET SLAVE.
Also rename master_gtid_pos=AUTO to master_use_gtid=1, which again is more
logical.
Move combining slave and gtid binlog state into a separate function.
Make SHOW ALL SLAVES STATUS use the same function, so it shows the
same value used by slave connect.
Add a test case.
More fixes for test failures in Buildbot:
- Do not run crashing test in Valgrind.
- FLUSH TABLES did not work to avoid errors about not closed tables when
crashing server. Suppress the messages instead.
- Rewrite multi-source test case to only start one pair of slave threads at a
time, to work-around the bug MDEV-4352.
Fix yet another race in the rpl_gtid_startpos test case.
Implement include/wait_for_purge.inc to purge binary logs; we need to
retry the purge multiple times until it succeeds in removing all the logs
we want, as binlog dump threads can be slow to stop on loaded machines and
hold back purge of logs that are still referenced by the thread.
Add tests crashing the slave in the middle of replication and checking that
replication picks-up again on restart in a crash-safe way.
Fix silly code that causes crash by inserting uninitialised data into a hash.
Test crashing the master, check that it recovers the binlog state.
Fix one bug introduced by previous commit (crash-recoved binlog state was
overwritten by loading stale binlog state file).
Fix Windows build error.
Implement test case rpl_gtid_stop_start.test to test normal stop and restart
of master and slave mysqld servers.
Fix a couple bugs found with the test:
- When InnoDB is disabled (no XA), the binlog state was not read when master
mysqld starts.
- Remove old code that puts a bogus D-S-0 into the initial binlog state, it
is not correct in current design.
- Fix memory leak in gtid_find_binlog_file().
When slave requested to start at some GTID, and that GTID was the very
last event (within its replication domain) in some binlog file, we did
not allow the binlog dump thread on the master to start from the
beginning of a following binlog file. This is a problem, since the
binlog file containing the GTID is likely to be purged if the
replication domain is unused for long.
With this fix, if the Gtid list event at the start of a binlog file
contains exactly the GTID requested by the slave, we allow to start
the binlog dump thread from this file, taking care not to skip any
events from that domain in the file.
Fix MDEV-4329. When user does CHANGE MASTER TO
MASTER_GTID_POS='<explicit GTID state>', we check that this state
does not conflict with the binlog. But the code forgot to give an
error in the case where a domain was completely missing from the
requested position (eg. MASTER_GTID_POS='').
--BINLOG-IGNORE-DB AND FULLY QUALIFIED TABLE
Problem:
=======
An ALTER TABLE statement is not written to binlog if server
started with "--binlog-ignore-db some database" and 'fully
qualified' table names are used in the ALTER TABLE statement
altering table different from current database context.
Analysis:
========
The above mentioned problem not only affects "ALTER TABLE"
statements but also to all kind of statements. Once the
current default database becomes "NULL" none of the
statements will be binlogged.
The current behaviour is such that if the user has specified
restrictions on which database needs to be replicated and the
default db is not specified, then do not replicate.
This means that "NULL" is considered to be equivalent to
everything (default db = null implied ignore don't log the
statement).
Fix:
===
"NULL" should not be considered as equivalent to everything.
Since the filtering criteria is not equal to "NULL" the
statement should be logged into binlog.
mysql-test/suite/rpl/r/rpl_loaddata_m.result:
Earlier when defalut database was "NULL" DROP TABLE
was not getting logged. Post this fix it will be logged
and the DROP will fail at slave as the table creation
was skipped by master as --binlog-ignore-db=test.
mysql-test/suite/rpl/t/rpl_loaddata_m.test:
Earlier when defalut database was "NULL" DROP TABLE
was not getting logged. Post this fix it will be logged
and the DROP will fail at slave as the table creation
was skipped by master as --binlog-ignore-db=test.
sql/rpl_filter.cc:
Replaced DBUG_RETURN(0) with DBUG_RETURN(1).
Adjust full test suite to work with GTID.
Huge patch, mainly due to having to update .result file for all SHOW BINLOG
EVENTS and mysqlbinlog outputs, where the new GTID events pop up.
Everything was painstakingly checked to be still correct and valid .result
file updates.
During server shutdown, we need to wait for binlog checkpointing to
finish in the binlog background thread before closing the binlog.
This was not done, so we could get assert and failure to finish the
final binlog checkpoint if shutdown happened in the middle.
-Change my_rnd() slightly to make it safer if two threads use it at the same time.
-Avoid some sprintf and strmov in vio.
-Changed thread_count to be automaticly incremented (instead of under LOCK_thread_count).
-Thread cache now uses LOCK_thread_cache instead of LOCK_thread_count.
-Moved delete thd out from LOCK_thread_count.
-Save some mysql_cond_broadcast(&COND_thread_count) calls.
-Removed call to getsockname() during connect.
-Initialize random generator without locks.
Other things:
-Fixed test cases that depends on changes for LOCK_grant
-Added thread_safe_decrement32() and thread_safe_increment32()
-Removed sql_rnd_with_mutex() and get_thread_running()
-In check_table_access() don't lock LOCK_grant if we can resolve the grant with user or db level grants (the normal case).
-Don't use a lock for setting THD->query_id.
-Fixed bug where thd->set_query_id() could be set to same value by multiple threads.
Thanks to Yoshinori Matsunobu for the benchmark of connection speed and to
Domas Mituzas for the inspiration for many of the fixes.
include/violite.h:
Change desc to a string pointer
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/perfschema/t/func_mutex.test:
Test for LOCK_system_variables_hash instead of LOCK_grant, as LOCK_grant is not anymore always taken for SELECT's.
mysys/my_gethwaddr.c:
More DBUG
mysys/my_rnd.c:
Change my_rnd() slightly to make it safer if two threads use it at the same time.
sql/event_scheduler.cc:
Changed thread_count to be automically incremented
Moved some safe things out from LOCK_thread_count.
Simplify deleting of THD for running thread.
sql/mysqld.cc:
Changed thread_count to be automically incremented
Thread cache now uses LOCK_thread_cache instead of LOCK_thread_count
Added delete_running_thd()
Moved delete thd out from LOCK_thread_count
More DBUG
Only call mysql_cond_broadcast(&COND_thread_count) if thread_count is 0
Removed call to getsockname() (old not anymore needed check)
sql/mysqld.h:
Removed sql_rnd_with_mutex() (not needed anymore)
Removed not used function get_thread_running()
Added thread_safe_decrement32() and thread_safe_increment32()
Simplified dec_thread_running() and inc_thread_running()
next_query_id() should return the original value for global_query_id, not the next one.
(Bug introduced with MySQL 5.5 merge).
sql/sql_acl.cc:
In check_table_access() don't lock LOCK_grant if we can resolve the grant with user or db level grants (the normal case).
sql/sql_class.cc:
Removed thd_lock_thread_count() and thd_unlock_thread_count()
Initialize random generator without locks
Don't use a lock for setting THD->query_id.
(This is only accessed by thread owning the THD)
sql/sql_class.h:
Don't use a lock for setting THD->query_id.
sql/sql_insert.cc:
Changed thread_count to be automically incremented
sql/sql_parse.cc:
Changed thread_count to be automically incremented
Fixed bug where thd->set_query_id() could be set to same value by multiple threads.
vio/vio.c:
Don't generate 'desc' with sprintf/strmov. Assign a pointer instead.
(Good enough as this is just for debugging)
Fix MDEV-4278: Slave does not check that master understands GTID.
Now the slave will abort with a suitable error if an attempt is made to connect
with GTID to a master that does not support GTID.
Fix MDEV-4275 - I/O thread restart duplicates events in the relay log.
The first time we connect to master after CHANGE MASTER or restart, we connect
from the GTID position. But then subsequent reconnects or IO thread restarts
reconnect with the old-style file/offset binlog pos from where it left off at
last disconnect. This is necessary to avoid duplicate events in the relay
logs, as there is nothing that synchronises the SQL thread update of GTID
state (multiple threads in case of multi-source) with IO thread reconnects.
Test cases.
Some small cleanups and fixes.
Fix things so that a master can switch with MASTER_GTID_POS=AUTO to a slave
that was previously running with log_slave_updates=0, by looking into the
slave replication state on the master when the slave requests something not
present in the binlog.
Be a bit more strict about what position the slave can ask for, to avoid some
easy-to-hit misconfiguration errors.
Start over with seq_no counter when RESET MASTER.
mysql-test/r/keywords.result:
Test that option works as table/column/variable
mysql-test/suite/funcs_1/r/storedproc.result:
OPTION is now a valid identifier
mysql-test/suite/funcs_1/t/storedproc.test:
OPTION is now a valid identifier
mysql-test/t/keywords.test:
Test that option works as table/column/variable
sql/sql_yacc.yy:
OPTION is now a valid identifier
Improvements to record_gtid():
- Check for correct table definition of mysql.rpl_slave_state
- Use autocommit, to save one call to ha_commit_trans()
- Slightly more efficient way to set table->write_set
- Use ha_index_read_map() to locate rows to support any storage engine.
mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
Fix that CHANGE MASTER ... MASTER_GTID_POS="" works to start from the very
beginning of the binary log (with test case).
Fix that not finding the requested GTID position in master binlog results in
fatal error, not endless connect retry.
Add test case demonstrating multi-source replication with GTID.
Test that we can move from being slave of two masters to be a slave
deeper down in the hierarchy (of a higher-up multi-source slave),
and vice versa.
- Add first basic mysql-test-run test case which tests switch to new master
using MASTER_GTID_POS=AUTO.
- When we connect with GTID, do not use any old relay logs, as they may
contain the wrong events or be corrupt after crash.
- Fix old bug that fails replication if we receive a heartbeat event
immediately after an event was omitted in the stream from the master.
- Fix rpl_end to clear Gtid_Pos_Auto, to keep check_testcase happy.
PLATFORM= MACOSX10.6 X86_64 MAX
Problem: The test was failing on pb2's mac machine because
it was not cleaned up properly. The test checks if
the command 'start slave until' throws a proper
error when issued with a wrong number/type of
parameters. After this,the replication stream was
stopped using the include file 'rpl_end.inc'.
The errors thrown earlier left the slave in an
inconsistent state to be closed by the include
file which was caught by the mac machine.
Fix: Started slave by invoking start_slave.inc to have a
working slave before calling rpl_reset.inc
Problem: The test file was not in a good shape. It tested
start slave until relay log file/pos combination
wrongly. A couple of commands were executed at
master and replicated at slave. Next, the
coordinates in terms of relay log file and pos
were noted down followed by reset slave and start
slave until saved relay log file/pos. Reset slave
deletes all relay log files and makes the slave
forget its replication position. So, using the
saved coordiantes after reset slave is wrong.
Fix: Split the test in two parts:
a) Test for start slave until master log file/pos and
checking for correct errors in the failure
scenarios.
b) Test for start slave until relay log file/pos.
Problem: The variables auto_increment_increment and
auto_increment_offset were set in the the include
file rpl_init.inc. This was only configured for
some connections that are rarely used by test
cases, so likely that it will cause confusion.
If replication tests want to setup these variables
they should do so explicitly.
Fix:
a) Removed code to set the variables
auto_increment_increment and auto_increment_offset
in the include file.
b) Updated tests files using the same.
mysql-test/suite/heap/heap.result:
Added test case
mysql-test/suite/heap/heap.test:
Added test case
storage/heap/hp_delete.c:
Fixed that we don't change order of keys for the current key when we delete them from the hash table.
Fixed that 'current_hash_ptr' is correct after heap_delete_key().
Don't "reset current_hash_ptr" on delete; This will improve time a lot for delete of rows when not all rows matches the search criteria.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
SUITE FOR 5.1
SYS_VARS suite is not enabled in MTR by default
run. Enabling it with this check-in.
mysql-test/suite/sys_vars/t/disabled.def:
Till the bugs are fixed, disabling the failed test scripts
innodb_bug12400341.test is disabled for valgrind daily test.
It might be affected by the previous test's undo slots existing,
because of slower execution.
Due to an internal change in the server code in between 5.1 and 5.5
(wl#2649) the hash function used in KEY partitioning changed
for numeric and date/time columns (from binary hash calculation
to character based hash calculation).
Also enum/set changed from latin1 ci based hash calculation to
binary hash between 5.1 and 5.5. (bug#11759782).
These changes makes KEY [sub]partitioned tables on any of
the affected column types incompatible with 5.5 and above,
since the calculation of partition id differs.
Also since InnoDB asserts that a deleted row was previously
read (positioned), the server asserts on delete of a row that
is in the wrong partition.
The solution for this situation is:
1) The partitioning engine will check that delete/update will go to the
partition the row was read from and give an error otherwise, consisting
of the rows partitioning fields. This will avoid asserts in InnoDB and
also alert the user that there is a misplaced row. A detailed error
message will be given, including an entry to the error log consisting
of both table name, partition and row content (PK if exists, otherwise
all partitioning columns).
2) A new optional syntax for KEY () partitioning in 5.5 is allowed:
[SUB]PARTITION BY KEY [ALGORITHM = N] (list_of_cols)
Where N = 1 uses the same hashing as 5.1 (Numeric/date/time fields uses
binary hashing, ENUM/SET uses charset hashing) N = 2 uses the same
hashing as 5.5 (Numeric/date/time fields uses charset hashing,
ENUM/SET uses binary hashing). If not set on CREATE/ALTER it will
default to 2.
This new syntax should probably be ignored by NDB.
3) Since there is a demand for avoiding scanning through the full
table, during upgrade the ALTER TABLE t PARTITION BY ... command is
considered a no-op (only .frm change) if everything except ALGORITHM
is the same and ALGORITHM was not set before, which allows manually
upgrading such table by something like:
ALTER TABLE t PARTITION BY KEY ALGORITHM = 1 () or
ALTER TABLE t PARTITION BY KEY ALGORITHM = 2 ()
4) Enhanced partitioning with CHECK/REPAIR to also check for/repair
misplaced rows. (Also works for ALTER TABLE t CHECK/REPAIR PARTITION)
CHECK FOR UPGRADE:
If the .frm version is < 5.5.3
and uses KEY [sub]partitioning
and an affected column type
then it will fail with an message:
KEY () partitioning changed, please run:
ALTER TABLE `test`.`t1` PARTITION BY KEY ALGORITHM = 1 (a)
PARTITIONS 12
(i.e. current partitioning clause, with the addition of
ALGORITHM = 1)
CHECK without FOR UPGRADE:
if MEDIUM (default) or EXTENDED options are given:
Scan all rows and verify that it is in the correct partition.
Fail for the first misplaced row.
REPAIR:
if default or EXTENDED (i.e. not QUICK/USE_FRM):
Scan all rows and every misplaced row is moved into its correct
partitions.
5) Updated mysqlcheck (called by mysql_upgrade) to handle the
new output from CHECK FOR UPGRADE, to run the ALTER statement
instead of running REPAIR.
This will allow mysql_upgrade (or CHECK TABLE t FOR UPGRADE) to upgrade
a KEY [sub]partitioned table that has any affected field type
and a .frm version < 5.5.3 to ALGORITHM = 1 without rebuild.
Also notice that if the .frm has a version of >= 5.5.3 and ALGORITHM
is not set, it is not possible to know if it consists of rows from
5.1 or 5.5! In these cases I suggest that the user does:
(optional)
LOCK TABLE t WRITE;
SHOW CREATE TABLE t;
(verify that it has no ALGORITHM = N, and to be safe, I would suggest
backing up the .frm file, to be used if one need to change to another
ALGORITHM = N, without needing to rebuild/repair)
ALTER TABLE t <old partitioning clause, but with ALGORITHM = N>;
which should set the ALGORITHM to N (if the table has rows from
5.1 I would suggest N = 1, otherwise N = 2)
CHECK TABLE t;
(here one could use the backed up .frm instead and change to a new N
and run CHECK again and see if it passes)
and if there are misplaced rows:
REPAIR TABLE t;
(optional)
UNLOCK TABLES;
When CHANGE MASTER fails, it may or may not have already added
the Master_info * to the index. Implement logic that properly
handles removal and freeing in both cases.
PROPERLY QUOTED IN BINLOG FILE
Problem: In load data file query, User variables are allowed
inside "Into_list" and "Set_list". These user variables used
inside these two lists are not properly guarded with backticks
while server is writting into binlog. Hence user variable names
like a` cannot be used in this context.
Fix: Properly quote these variables while
writting into binlog
mysql-test/r/func_compress.result:
changing result file
mysql-test/r/variables.result:
changing result file
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
changing result file
sql/item_func.cc:
Quote the user variable items
The problem was that a temporary table was re-created as a non-temporary table.
mysql-test/suite/maria/truncate.result:
Added test cases
mysql-test/suite/maria/truncate.test:
Added test cases
sql/sql_truncate.cc:
Mark that table to be created is a temporary table
storage/maria/ha_maria.cc:
Ensure that temporary tables are not transactional.
libmysqld/lib_sql.cc:
* don't overwrite my_progname in embedded
* this memroot is sometimes freed by the caller, outside of THD context
mysql-test/t/user_var.test:
typo: duplicate line
* remove unused mysql_option
* don't allocate 5GB of memory in the mtr tests
* restore the behavior in dynamic_column_offset_byte(), put the ifdef correctly
* prefer __attribute__((unused)) to #ifdef
* prefer UNINIT_VAR to LINT_INIT
* make most Warning_info users blissfully unaware of the postponed initialization
* use my_offsetof instead of offsetof where the compiler thinks the latter is incorrect
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
buf_page_get_gen(): Do not attempt to decompress a compressed-only
page when mode == BUF_PEEK_IF_IN_POOL. This mode is only being used by
btr_search_drop_page_hash_when_freed(). There cannot be any adaptive
hash index pointing to a page that does not exist in uncompressed
format in the buffer pool.
innodb_buffer_pool_evict_update(): New function for debug builds, to handle
SET GLOBAL innodb_buffer_pool_evicted='uncompressed'
by evicting all uncompressed page frames of compressed tablespaces
from the buffer pool.
rb#1873 approved by Jimmy Yang
The test, binlog.binlog_spurious_ddl_errors was failing on pb2 at the statement
"UNINSTALL PLUGIN example;" with this warning:
"Warning 1620 Plugin is busy and will be uninstalled on shutdown "
Fix
Spurious warnings occur in the test since we do not empty the Query cache,
used by the example plugin at the time of creating tables using the plugin.
Hence, the query chache is flushed before uninstalling the plugin.
Also, as part of running the test across platforms, the plugin installation
script is changed.
The original patch with the implementation of virtual columns
did not support INSERT DELAYED into tables with virtual columns.
This patch fixes the problem.
WITH A VARIABLE AND ORDER BY
Bug#16035412 MYSQL SERVER 5.5.29 WRONG SORTING USING COMPLEX INDEX
This is a fix for a regression introduced by Bug#12667154:
Bug#12667154 attempted to fix a performance problem with subqueries
that did filesort. For doing filesort, the optimizer creates a quick
select object to use when building the sort index. This quick select
object was deleted after the first call to create_sort_index(). Thus,
for queries where the subquery was executed multiple times, the quick
object was only used for the first execution. For all later executions
of the subquery, filesort used a complete table scan for building the
sort index. The fix for Bug#12667154 tried to fix this by not deleting
the quick object after the first execution of create_sort_index() so
that it would be re-used for building the sort index by the following
executions of the subquery.
This regression introduced in Bug#12667154 is that due to not deleting
the quick select object after building the sort index, the quick
object could in some cases be used also during the second phase of the
execution of the subquery instead of using the created sort
index. This caused wrong results to be returned.
The fix for this issue is to delete the reference to the select object
after it has been used in create_sort_index(). In this way the select
and quick objects will not be available when doing the second phase
of the execution of the select operation. To ensure that the select
object can be re-used for the following executions of the subquery
we make a copy of the select pointer. This is used for restoring the
select object after the select operation is completed.
mysql-test/suite/innodb/r/innodb_mysql.result:
Changed explain output: The explain now contains "Using where" since we
have restored the select pointer after doing the filesort operation.
sql/sql_select.cc:
Change create_sort_index() so that it always sets the pointer to
the select object to NULL. This is done in order to avoid that the
select->quick object can be used when execution the main part of
the select operation.
sql/sql_select.h:
New member in JOIN_TAB: saved_select. Used by create_sort_index to
make a backup copy of the select pointer.
WITH A VARIABLE AND ORDER BY
Bug#16035412 MYSQL SERVER 5.5.29 WRONG SORTING USING COMPLEX INDEX
This is a fix for a regression introduced by Bug#12667154:
Bug#12667154 attempted to fix a performance problem with subqueries
that did filesort. For doing filesort, the optimizer creates a quick
select object to use when building the sort index. This quick select
object was deleted after the first call to create_sort_index(). Thus,
for queries where the subquery was executed multiple times, the quick
object was only used for the first execution. For all later executions
of the subquery, filesort used a complete table scan for building the
sort index. The fix for Bug#12667154 tried to fix this by not deleting
the quick object after the first execution of create_sort_index() so
that it would be re-used for building the sort index by the following
executions of the subquery.
This regression introduced in Bug#12667154 is that due to not deleting
the quick select object after building the sort index, the quick
object could in some cases be used also during the second phase of the
execution of the subquery instead of using the created sort
index. This caused wrong results to be returned.
The fix for this issue is to delete the reference to the select object
after it has been used in create_sort_index(). In this way the select
and quick objects will not be available when doing the second phase
of the execution of the select operation. To ensure that the select
object can be re-used for the following executions of the subquery
we make a copy of the select pointer. This is used for restoring the
select object after the select operation is completed.
mysql-test/suite/innodb/r/innodb_mysql.result:
Changed explain output: The explain now contains "Using where" since we
have restored the select pointer after doing the filesort operation.
sql/sql_select.cc:
Change create_sort_index() so that it always sets the pointer to
the select object to NULL. This is done in order to avoid that the
select->quick object can be used when execution the main part of
the select operation.
sql/sql_select.h:
New member in JOIN_TAB: saved_select. Used by create_sort_index to
make a backup copy of the select pointer.
- Added --verbose to BUILD scripts to get make to write out compile commands.
- Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 was used with build scripts.
- Don't write warnings about replication variables when doing bootstrap.
- Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
- Ignore some compiler warnings
BUILD/FINISH.sh:
Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 or --verbose was used
BUILD/SETUP.sh:
Added --verbose to print out the full compile lines
Updated help message
client/mysqltest.cc:
Fixed that one can use 'replace' with cat_file
cmake/configure.pl:
If --verbose is used, get make to write out compile commands
debian/dist/Debian/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
debian/dist/Ubuntu/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
include/my_pthread.h:
Made set_timespec_time_nsec() more portable.
include/mysql/psi/mysql_thread.h:
Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
mysql-test/suite/innodb/r/auto_increment_dup.result:
Fixed wrong DBUG_SYNC
mysql-test/suite/innodb/t/auto_increment_dup.test:
Fixed wrong DBUG_SYNC
mysql-test/suite/perfschema/include/upgrade_check.inc:
Make test more portable for changes in *.sql files
mysql-test/suite/perfschema/r/pfs_upgrade.result:
Updated test results
mysql-test/valgrind.supp:
Ignore running Aria checkpoint thread
scripts/mysqlaccess.sh:
Changed reference of bugs database
Ensure that also client-server group is read.
sql/handler.cc:
Added missing syncpoint
sql/mysqld.cc:
Don't write warnings about replication variables when doing bootstrap
sql/mysqld.h:
Don't write warnings about replication variables when doing bootstrap
sql/rpl_rli.cc:
Don't write warnings about replication variables when doing bootstrap
sql/sql_insert.cc:
Don't mask SERVER_SHUTDOWN in insert_delayed
This is done to be able to distingush between shutdown and interrupt errors
support-files/compiler_warnings.supp:
Ignore some compiler warnings in xtradb,innobase, oqgraph, yassl, string3.h
Give error for wrong parameters to CHANGE MASTER
Extend MASTER_PASSWORD and MASTER_HOST lengths
mysql-test/suite/rpl/r/rpl_password_boundaries.result:
Test length of MASTER_PASSWORD, MASTER_HOST and MASTER_USER
mysql-test/suite/rpl/r/rpl_semi_sync.result:
Use different password than user name for better test coverage
mysql-test/suite/rpl/t/rpl_password_boundaries.test:
Test length of MASTER_PASSWORD, MASTER_HOST and MASTER_USER
mysql-test/suite/rpl/t/rpl_semi_sync.test:
Use different password than user name for better test coverage
sql/rpl_mi.h:
Extend MASTER_PASSWORD and MASTER_HOST lengths
sql/sql_repl.cc:
Give error for wrong parameters to CHANGE MASTER
sql/sql_repl.h:
Extend MASTER_PASSWORD and MASTER_HOST lengths
Before this fix, configuring the server with:
- performance_schema_events_waits_history_size=0
- performance_schema_events_waits_history_long_size=0
could cause a crash in the performance schema.
These settings to 0 are intended to be valid and supported,
and are in fact working properly in mysql 5.6 and up already.
This fix backports the code fix and test cases from mysql 5.6
to the mysql 5.5 release.
- as of 5.5.27, YEAR(2) is deprecated, hence the new warning;
- MDEV-553 - different error code/message on out-of-range autoincrement;
- INSERT IGNORE now produces a warning if a duplicate was encountered (change pushed along with MDEV-553)
With MDEV-532, the binlog_checkpoint event is logged asynchronously
from a binlog background thread. This causes some sporadic failures
in some test cases whose output depends on order of events in
binlog.
Fix using an include file that waits until the binlog checkpoint
event has been logged before proceeding with the test case.
Make the commit checkpoint inside InnoDB be asynchroneous.
Implement a background thread in binlog to do the writing and flushing of
binlog checkpoint events to disk.
Problem:
Before the ALTER TABLE statement, the array
dict_index_t::stat_n_diff_key_vals had proper values calculated
and updated. But after the ALTER TABLE statement, all the values
of this array is 0.
Because of this statistics returned by innodb_rec_per_key() is
different before and after the ALTER TABLE statement. Running the
ANALYZE TABLE command populates the statistics correctly.
Solution:
After ALTER TABLE statement, set the flag dict_table_t::stat_initialized
correctly so that the table statistics will be recalculated properly when
the table is next loaded. But note that we still don't choose the loose
index scans. This fix only ensures that an ALTER TABLE does not change
the optimizer plan.
rb://1639 approved by Marko and Jimmy.
RPL_ROW_UNTIL TIMES OUT
patch to fix post push falures in pb2
mysql-test/suite/rpl/r/rpl_row_until.result:
changes to account for the changes made in
corresponding test file.
mysql-test/suite/rpl/t/disabled.def:
disabled test in macosx
mysql-test/suite/rpl/t/rpl_row_until.test:
replaced static relayy log file by an mtr variable
which saves the name of relay log file.
table_stat -> table_stats
column_stat -> column_stats
index_stat -> index_stats
to be in line with the names of innodb statistical tables
from mysql-5.6: innodb_table_stats and innodb_index_stats.
RPL_ROTATE_LOGS has been failing sporadically in what seems a
problem related to routines that update the coordinates. However,
the test lacks proper assert statments and because of this the
debug information upon failure simply points to the content
mismatch between the test and the result file.
Not as a solution, but as a improvement to the test to better
debug this failure, new assert statments were added to the test.
@rpl_rotate_logs.test
Added new assert statments reducing the
dependency on the result file.
@rpl_rotate_logs.result
Added new content to the result file to
match the test changes
Problem: The problem with the test is that the slave returns
from start_slave.inc call too early before the list
is actually actualised. This caused the slave stale
data to be reported.
Fix: Added a wait in the test till the slave's IO status is
changed to "Waiting for master to send event" which
which ensures the list is correctly updated.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
mysql-test/suite/engines/funcs/r/rpl_row_until.result:
modified to accomodate the changes in corresponding
test file.
mysql-test/suite/engines/funcs/t/disabled.def:
removed from the list of disabled tests.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
fixed rpl.rpl_row_until and copied its content to
engines/funcs.rpl_row_until. The reason being both
are same tests but rpl.rpl_row_until is an
updated version.
mysql-test/suite/rpl/t/disabled.def:
removed from the list of disabled tests.
sql/sql_repl.cc:
Added a check to catch an improper combination
of arguements passed to 'START SLAVE UNTIL'. Earlier,
START SLAVE UNTIL MASTER_LOG_FILE='master-bin.000001',
MASTER_LOG_POS=561, RELAY_LOG_POS=12;
passed. It is now detected and an error is reported.
When a binlog is replayed into a server, e.g.:
$ mysqlbinlog binlog.000001 | mysql
it sets a pseudo slave mode on the client connection in order to server
be able to read binlog events, there is, a format description event is
needed to correctly read following events.
Also this pseudo slave mode applies to the current connection
replication rules that are needed to correctly apply binlog events.
If a binlog dump is sourced on a connection, this pseudo slave mode will
remains after it, what will apply unexpected rules from customer
perspective to following commands.
Added a new SET statement to binlog dump that will unset pseudo slave
mode at the end of dump file.
- no need to use --skip-ndb in collections files anymore, since long but
more clear logic after recent mtr.pl fixes. ndb tests are never run in MySQL Server
unless explicitly requested
- remove sys_vars.ndb_log_update_as_write_basic.test and sys_vars.ndb_log_updated_only_basic.result since MySQL Server does not have those
options.
- Only sys_vars.have_ndbcluster_basic left since MySQL Server has that variable hardcoded.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
If triggers are used for an insert/update/delete statement than the values of
all virtual columns must be computed as any of them may be used by the triggers.
main.mysqlbinlog_row_innodb are skipped by mtr
=== Problem ===
The following tests are wrongly placed in main suite and as a
result these are not run with proper binlog format combinations.
Some are always skipped by mtr.
1) mysqlbinlog_row_myisam
2) mysqlbinlog_row_innodb
3) mysqlbinlog_row.test
4) mysqlbinlog_row_trans.test
5) mysqlbinlog-cp932
6) mysqlbinlog2
7) mysqlbinlog_base64
=== Background ===
mtr runs the tests placed in main suite with binlog format=stmt.
Those that need to be tested against binlog format=row or mixed
or more than one binlog format and require only one mysql server
are placed in binlog suite. mtr runs tests in binlog suite with
all three binlog formats(stmt,row and mixed).
=== Fix ===
1) Moved the test listed in problem section above to binlog suite.
2) Added prefix "binlog_" to the name of each test case moved.
Renamed the coresponding result files and option files accordingly.
mysql-test/extra/binlog_tests/mysqlbinlog_row_engine.inc:
include file for mysqlbinlog_row_myisam.test and
mysqlbinlog_row_myisam.test which are being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog-cp932.result:
result file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog2.result:
result file for mysqlbinlog2.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_base64.result:
result file for mysqlbinlog_base64.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row.result:
result file for mysqlbinlog_row.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_innodb.result:
result file for mysqlbinlog_row_innodb.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_myisam.result:
result file for mysqlbinlog_row_myisam.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_trans.result:
result file for mysqlbinlog_row_trans.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932-master.opt:
option file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog2.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_base64.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_innodb.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_myisam.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_trans.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
Other things:
- Added new commands: START ALL SLAVES, STOP ALL SLAVES and SHOW FULL SLAVE STATUS
- Almost all usage of 'active_mi' is deleted.
- Added parameter to reset_logs() so that one can specify if new logs should be created.
- Check wildcard match as early as possible for SHOW STATUS. This makes SHOW STATUS like 'xxx' a lot faster and use less mutex
- Made max_relay_log_size depending on master connection.
- Added sys_vars.default_master_connection_basic to fix a failure in sys_vars.all_vars, modified sql_slave_skip_counter_basic to allow session-level settings
- Added commands to mysqladmin: start-all-slaves & stop-all-slaves
- Removed logging of "next log '%s' is currently active | not active"
- Fixed bug in my_vsnprintf() when using positional parameters with length
- Added fn_ext2(), which returns pointer to last '.' in file name
- max_relay_log_size now acts as a normal slave specific variable
- Don't store replication position if innobase_overwrite_relay_log_info is not set
- max_relay_log_size copies it's values from max_binlog_size at startup
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqladmin.cc:
Added commands start-all-slaves & stop-all-slaves
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated signature file
include/mysql/plugin_auth.h.pp:
Updated signature file
include/mysql/plugin_ftparser.h.pp:
Updated signature file
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/r/flush.result:
Added test for new syntax of flush relay logs (can't repeat relay logs or slave)
mysql-test/r/mysqld--help.result:
Updated result
mysql-test/r/mysqltest.result:
Updated result
mysql-test/r/parser.result:
Updated result
mysql-test/r/signal_code.result:
Updated result after introducing new commands
mysql-test/r/sp-code.result:
Updated result after introducing new commands
mysql-test/suite/multi_source:
Tests for multi-source
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Test of logs
mysql-test/suite/multi_source/info_logs.test:
Test of logs
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Test relay log handling
mysql-test/suite/multi_source/relaylog_events.test:
Test relay log handling
mysql-test/suite/multi_source/reset_slave.result:
Test RESET SLAVE
mysql-test/suite/multi_source/reset_slave.test:
Test RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/skip_counter.result:
Testing skip_counter and max_relay_log_size
mysql-test/suite/multi_source/skip_counter.test:
Testing skip_counter and max_relay_log_size
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_deadlock_innodb.result:
New warnings
mysql-test/suite/rpl/r/rpl_filter_dbs_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_filter_tables_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_filter_wild_tables_dynamic.result:
Improved error texts
mysql-test/suite/rpl/r/rpl_flush_logs.result:
Update results
mysql-test/suite/rpl/r/rpl_heartbeat.result:
Warning was removed
mysql-test/suite/rpl/r/rpl_heartbeat_basic.result:
Warning was removed
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_skip_replication.result:
New error message
mysql-test/suite/rpl/r/rpl_start_slave_deadlock_sys_vars.result:
Test removed as the old DBUG_SYNC entries doesn't exist anymore
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/t/rpl_flush_logs.test:
Updated tests as relay log files is created a bit differently than before
mysql-test/suite/rpl/t/rpl_start_slave_deadlock_sys_vars.test:
Test removed as the old DBUG_SYNC entries doesn't exist anymore
mysql-test/suite/sys_vars/r/default_master_connection_basic.result:
New test to test usage of default_master_connection
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/r/sql_slave_skip_counter_basic.result:
Updated usage of sql_slave_skip_counter
mysql-test/suite/sys_vars/t/default_master_connection_basic.test:
New test to test usage of default_master_connection
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysql-test/suite/sys_vars/t/sql_slave_skip_counter_basic.test:
Updated test for multi-source
mysql-test/t/flush.test:
Added test for new syntax of flush relay logs (can't repeat relay logs or slave)
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
plugin/semisync/semisync_master_plugin.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
Added parameter to reset_logs() so that one can specify if new logs should be created.
Removed some wrong casts
Changed some constants to defines
sql/log.h:
Added parameter to reset_logs()
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
max_relay_log_size copies it's values from max_binlog_size at startup
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/mysqld.h:
Added mysqld_server_initialized
Removed max_relay_log_size
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
Added start|stop all slaves
sql/rpl_mi.h:
Added connection_name and Master_info_index
Updated prototypes
sql/rpl_rli.cc:
Added connection_name to relay log files.
If we do a full reset, don't create any new relay log files.
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be ulong
Made executed_entries and max_relay_log_size depending on master connection.
sql/set_var.cc:
Fixed that one can get variable name also when one uses DEFAULT
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
Improved error message if connection exists
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
Removed logging of "next log '%s' is currently active | not active"
Added Slave_received_heartbeats and Slave_heartbeat_period
sql/slave.h:
Added new defines and prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Made slave_skip_count and max_relay_log_size depending on master connection. These variables are in THD to make changing them thread safe.
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_insert.cc:
thd->slave_thread -> thd->rli_slave
Removed usage of active_mi
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name, relay_log_connection_name, SQLCOM_SLAVE_ALL_START and SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
thd->slave_thread -> thd->rli_slave
Removed usage of active_mi
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()-
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START and SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
Fixed issues with FLUSH RELAY LOGS
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
******
Added multi-source support to show relaylog events
******
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
******
Updated calls to create_signed_file_name()
sql/sql_show.cc:
Check wildcard match as early as possible for SHOW STATUS. This makes SHOW STATUS like 'xxx' a lot faster and use less mutex
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
Added multi-source support to show relaylog events
Added new commands START ALL SLAVES, STOP ALL SLAVES and SHOW FULL SLAVE STATUS
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
storage/example/ha_example.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
storage/sphinx/ha_sphinx.cc:
Use SHOW_SIMPLE_FUNC to optimize SHOW STATUS
storage/xtradb/handler/ha_innodb.cc:
Don't store replication position if innobase_overwrite_relay_log_info is not set
strings/my_vsnprintf.c:
Fixed bug when using positional parameters with length
This allows us to avoid calculating variables (including those involving mutex) that doesn't match the given
wildcard in SHOW STATUS LIKE '...'
Removed all references to active_mi that could cause problems for multi-source replication.
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated .pp file
include/mysql/plugin_auth.h.pp:
Updated .pp file
include/mysql/plugin_ftparser.h.pp:
Updated .pp file
mysql-test/suite/multi_source/info_logs.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/info_logs.test:
Test new syntax
mysql-test/suite/multi_source/simple.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/simple.test:
test new syntax
mysql-test/suite/multi_source/syntax.result:
Updated result
mysql-test/suite/multi_source/syntax.test:
Test new syntax
mysql-test/suite/rpl/r/rpl_skip_replication.result:
Updated result
plugin/semisync/semisync_master_plugin.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/item_create.cc:
Simplify code
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Constant -> define
sql/log_event.cc:
Added comment
sql/mysqld.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
Made slave_retried_trans, slave_received_heartbeats and heartbeat_period multi-source safe
Clear variable denied_connections and slave_retried_transactions on startup
sql/mysqld.h:
Added slave_retried_transactions
sql/rpl_mi.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Added start_all_slaves() and stop_all_slaves()
sql/rpl_mi.h:
Added prototypes
sql/rpl_rli.cc:
create_signed_file_name -> create_logfile_name_with_suffix
added executed_entries
sql/rpl_rli.h:
Added executed_entries
sql/share/errmsg-utf8.txt:
More and better error messages
sql/slave.cc:
Added more fields to SHOW ALL SLAVES STATUS
Added slave_retried_transactions
Changed constants -> defines
sql/sql_class.h:
Added comment
sql/sql_insert.cc:
active_mi.rli -> thd->rli_slave
sql/sql_lex.h:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
active_mi.rli -> thd->rli_slave
sql/sql_parse.cc:
Added START|STOP ALL SLAVES
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made REFRESH RELAY LOG multi-source safe
sql/sql_repl.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Don't send my_ok() from start_slave() or stop_slave() so that we can call it for all master connections
sql/sql_show.cc:
Compare wild cards early for all variables
sql/sql_yacc.yy:
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
sql/sys_vars.cc:
Made replicate_events_marked_for_skip,slave_net_timeout and rpl_filter multi-source safe.
sql/sys_vars.h:
Simplify Sys_var_rpl_filter
Changed names of multi-source log files so that original suffixes are kept.
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Updated results
mysql-test/suite/multi_source/info_logs.test:
Changed to test with complex names to be able to verify the filename generator code
mysql-test/suite/multi_source/relaylog_events.result:
Updated results
mysql-test/suite/multi_source/reset_slave.result:
Updated results
mysql-test/suite/multi_source/skip_counter.result:
Updated results
mysql-test/suite/multi_source/skip_counter.test:
Added testing of max_relay_log_size
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
sql/log.cc:
Removed some wrong casts
sql/log.h:
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added that max_relay_log_size copies it's values from max_binlog_size
sql/mysqld.h:
Removed max_relay_log_size
sql/rpl_mi.cc:
Changed names of multi-source log files so that original suffixes are kept.
sql/rpl_mi.h:
Updated prototype
sql/rpl_rli.cc:
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Made max_relay_log_size depending on master connection.
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/sql_class.h:
Made max_relay_log_size depending on master connection.
sql/sql_repl.cc:
Updated calls to create_signed_file_name()
sql/sys_vars.cc:
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
- Added parameter to reset_logs() so that one can specify if new logs should be created.
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/suite/multi_source/info_logs.result:
New test
mysql-test/suite/multi_source/info_logs.test:
New test
mysql-test/suite/multi_source/my.cnf:
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Added cleanup
mysql-test/suite/multi_source/relaylog_events.test:
Added cleanup
mysql-test/suite/multi_source/reset_slave.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.test:
Syncronize positions before show full slave status
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
sql/log.cc:
Added parameter to reset_logs() so that one can specify if new logs should be created.
sql/log.h:
Added parameter to reset_logs()
sql/rpl_mi.cc:
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
sql/rpl_rli.cc:
If we do a full reset, don't create any new relay log files.
sql/share/errmsg-utf8.txt:
Improved error message if connection exists
sql/sql_parse.cc:
Fixed memory leak
sql/sql_repl.cc:
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
mysql-test/r/mysqltest.result:
Updated results
mysql-test/r/parser.result:
Updated results
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
sql/mysqld.h:
Added mysqld_server_initialized
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
sql/rpl_mi.h:
Added connection_name and Master_info_index
sql/rpl_rli.cc:
Added connection_name to relay log files.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be uint
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
sql/slave.h:
Added new prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Added slave_skip_count to variables to make changing the @@sql_slave_skip_count variable thread safe
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
LP bug #1035225 / MySQL bug #66301: INSERT ... ON DUPLICATE KEY UPDATE +
innodb_autoinc_lock_mode=1 is broken
The problem was that when certain INSERT ... ON DUPLICATE KEY UPDATE
were executed concurrently on a table containing an AUTO_INCREMENT
column as a primary key, InnoDB would correctly reserve non-overlapping
AUTO_INCREMENT intervals for each statement, but when the server
encountered the first duplicate key error on the secondary key in one of
the statements and performed an UPDATE, it also updated the internal
AUTO_INCREMENT value to the one from the existing row that caused a
duplicate key error, even though the AUTO_INCREMENT value was not
specified explicitly in the UPDATE clause. It would then proceed with
using AUTO_INCREMENT values the range reserved previously by another
statement, causing duplicate key errors on the AUTO_INCREMENT column.
Fixed by changing write_record() to ensure that in case of a duplicate
key error the internal AUTO_INCREMENT counter is only updated when the
AUTO_INCREMENT value was explicitly updated by the UPDATE
clause. Otherwise it is restored to what it was before the duplicate key
error, as that value is unused and can be reused for subsequent
successfully inserted rows.
sql/sql_insert.cc:
Don't update next_insert_id to the value of a row found during ON DUPLICATE KEY UPDATE.
sql/sql_parse.cc:
Added DBUG_SYNC
sql/table.h:
Added next_number_field_updated flag to detect changing of auto increment fields.
Moved fields a bit to get bool fields after each other (better alignment)
create table t1 (a smallint primary key auto_increment);
insert into t1 values(32767);
insert into t1 values(NULL);
ERROR 1062 (23000): Duplicate entry '32767' for key 'PRIMARY
Now on always gets error HA_ERR_AUTOINC_RANGE=167 "Out of range value for column", independent of
store engine, SQL Mode or number of inserted rows. This is an unique error that is easier to test for in replication.
Another bug fix is that we now get an error when trying to insert a too big auto-generated value, even in non-strict mode.
Before one get insted the max column value inserted.
This patch also fixes some issues with inserting negative numbers in an auto-increment column.
Fixed the ER_DUP_ENTRY and HA_ERR_AUTOINC_ERANGE are compared the same between master and slave.
This ensures that replication works between an old server to a new slave for auto-increment overflow errors.
Added SQLSTATE errors for handler errors
Smaller bug fixes:
* Added warnings for duplicate key errors when using INSERT IGNORE
* Fixed bug when using --skip-log-bin followed by --log-bin, which did set log-bin to "0"
* Allow one to see how cmake is called by using --just-print --just-configure
BUILD/FINISH.sh:
--just-print --just-configure now shows how cmake would be invoked. Good for understanding parameters to cmake.
cmake/configure.pl:
--just-print --just-configure now shows how cmake would be invoked. Good for understanding parameters to cmake.
include/CMakeLists.txt:
Added handler_state.h
include/handler_state.h:
SQLSTATE for handler error messages.
Required for HA_ERR_AUTOINC_ERANGE, but solves also some other cases.
mysql-test/extra/binlog_tests/binlog.test:
Fixed old wrong behaviour
Added more tests
mysql-test/extra/binlog_tests/binlog_insert_delayed.test:
Reset binary log to only print what's necessary in show_binlog_events
mysql-test/extra/rpl_tests/rpl_auto_increment.test:
Update to new error codes
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Ignore warnings as this depends on how the test is run
mysql-test/include/strict_autoinc.inc:
On now gets an error on overflow
mysql-test/r/auto_increment.result:
Update results after fixing error message
mysql-test/r/auto_increment_ranges_innodb.result:
Test new behaviour
mysql-test/r/auto_increment_ranges_myisam.result:
Test new behaviour
mysql-test/r/commit_1innodb.result:
Added warnings for duplicate key error
mysql-test/r/create.result:
Added warnings for duplicate key error
mysql-test/r/insert.result:
Added warnings for duplicate key error
mysql-test/r/insert_select.result:
Added warnings for duplicate key error
mysql-test/r/insert_update.result:
Added warnings for duplicate key error
mysql-test/r/mix2_myisam.result:
Added warnings for duplicate key error
mysql-test/r/myisam_mrr.result:
Added warnings for duplicate key error
mysql-test/r/null_key.result:
Added warnings for duplicate key error
mysql-test/r/replace.result:
Update to new error codes
mysql-test/r/strict_autoinc_1myisam.result:
Update to new error codes
mysql-test/r/strict_autoinc_2innodb.result:
Update to new error codes
mysql-test/r/strict_autoinc_3heap.result:
Update to new error codes
mysql-test/r/trigger.result:
Added warnings for duplicate key error
mysql-test/r/xtradb_mrr.result:
Added warnings for duplicate key error
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated result
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Out of range data for auto-increment is not inserted anymore
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
Updated result
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Out of range data for auto-increment is not inserted anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result
mysql-test/suite/innodb/r/innodb-autoinc.result:
Update to new error codes
mysql-test/suite/innodb/r/innodb-lock.result:
Updated results
mysql-test/suite/innodb/r/innodb.result:
Updated results
mysql-test/suite/innodb/r/innodb_bug56947.result:
Updated results
mysql-test/suite/innodb/r/innodb_mysql.result:
Updated results
mysql-test/suite/innodb/t/innodb-autoinc.test:
Update to new error codes
mysql-test/suite/maria/maria3.result:
Updated result
mysql-test/suite/maria/mrr.result:
Updated result
mysql-test/suite/optimizer_unfixed_bugs/r/bug43617.result:
Updated result
mysql-test/suite/rpl/r/rpl_auto_increment.result:
Update to new error codes
mysql-test/suite/rpl/r/rpl_insert_delayed,stmt.rdiff:
Updated results
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
Updated results
mysql-test/t/auto_increment.test:
Update to new error codes
mysql-test/t/auto_increment_ranges.inc:
Test new behaviour
mysql-test/t/auto_increment_ranges_innodb.test:
Test new behaviour
mysql-test/t/auto_increment_ranges_myisam.test:
Test new behaviour
mysql-test/t/replace.test:
Update to new error codes
mysys/my_getopt.c:
Fixed bug when using --skip-log-bin followed by --log-bin, which did set log-bin to "0"
sql/handler.cc:
Ignore negative values for signed auto-increment columns
Always give an error if we get an overflow for an auto-increment-column (instead of inserting the max value)
Ensure that the row number is correct for the out-of-range-value error message.
******
Fixed wrong printing of column namn for "Out of range value" errors
Fixed that INSERT_ID is correctly replicated also for out-of-range autoincrement values
Fixed that print_keydup_error() can also be used to generate warnings
******
Return HA_ERR_AUTOINC_ERANGE (167) instead of ER_WARN_DATA_OUT_OF_RANGE for auto-increment overflow
sql/handler.h:
Allow INSERT IGNORE to continue also after out-of-range inserts.
Fixed that print_keydup_error() can also be used to generate warnings
sql/log_event.cc:
Added DBUG_PRINT
Fixed the ER_AUTOINC_READ_FAILED, ER_DUP_ENTRY and HA_ERR_AUTOINC_ERANGE are compared the same between master and slave.
This ensures that replication works between an old server to a new slave for auto-increment overflow errors.
sql/sql_insert.cc:
Add warnings for duplicate key errors when using INSERT IGNORE
sql/sql_state.c:
Added handler errors
sql/sql_table.cc:
Update call to print_keydup_error()
storage/innobase/handler/ha_innodb.cc:
Fixed increment handling of auto-increment columns to be consistent with rest of MariaDB.
storage/xtradb/handler/ha_innodb.cc:
Fixed increment handling of auto-increment columns to be consistent with rest of MariaDB.
Introduce a new storage engine API method commit_checkpoint_request().
This is used to replace the fsync() at the end of every storage engine
commit with a single fsync() when a binlog is rotated.
Binlog rotation is now done during group commit instead of being
delayed until unlog(), removing some server stall and avoiding an
expensive lock/unlock of LOCK_log inside unlog().
mysql-test/suite/heap/heap_hash.result:
Added test case
mysql-test/suite/heap/heap_hash.test:
Added test case
storage/heap/hp_hash.c:
Limit key data length to max key length
feature_dynamic_columns,feature_fulltext,feature_gis,feature_locale,feature_subquery,feature_timezone,feature_trigger,feature_xml
Opened_views, Executed_triggers, Executed_events
Added new process status 'updating status' as part of 'freeing items'
mysql-test/r/features.result:
Test of feature_xxx status variables
mysql-test/r/mysqld--help.result:
Removed duplicated 'language' variable.
mysql-test/r/view.result:
Test of opened_views
mysql-test/suite/rpl/t/rpl_start_stop_slave.test:
Write more information on failure
mysql-test/t/features.test:
Test of feature_xxx status variables
mysql-test/t/view.test:
Test of opened_views
sql/event_scheduler.cc:
Increment executed_events status variable
sql/field.cc:
Increment status variable
sql/item_func.cc:
Increment status variable
sql/item_strfunc.cc:
Increment status variable
sql/item_subselect.cc:
Increment status variable
sql/item_xmlfunc.cc:
Increment status variable
sql/mysqld.cc:
Add new status variables to 'show status'
sql/mysqld.h:
Added executed_events
sql/sql_base.cc:
Increment status variable
sql/sql_class.h:
Add new status variables
sql/sql_parse.cc:
Added new process status 'updating status' as part of 'freeing items'
sql/sql_trigger.cc:
Increment status variable
sql/sys_vars.cc:
Increment status variable
sql/tztime.cc:
Increment status variable
THOUGH IT IS NOT.
The following error message is misleading because it claims
that the BLOB space is not counted.
"ERROR 1118 (42000): Row size too large. The maximum row size for
the used table type, not counting BLOBs, is 8126. You have to
change some columns to TEXT or BLOBs"
When the ROW_FORMAT=compact or ROW_FORMAT=REDUNDANT is used,
the BLOB prefix is stored inline along with the row. So
the above error message is changed as follows depending on
the row format used:
For ROW_FORMAT=COMPRESSED or ROW_FORMAT=DYNAMIC, the error
message is as follows:
"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB may help. In current row format,
BLOB prefix of 0 bytes is stored inline."
For ROW_FORMAT=COMPACT or ROW_FORMAT=REDUNDANT, the error
message is as follows:
"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB or using ROW_FORMAT=DYNAMIC or
ROW_FORMAT=COMPRESSED may help. In current row
format, BLOB prefix of 768 bytes is stored inline."
rb://1252 approved by Marko Makela
Backport from mysql-5.6 the fix
(revision-id sunny.bains@oracle.com-20120315045831-20rgfa4cozxmz7kz)
Bug#13839886 - CRASH IN INNOBASE_NEXT_AUTOINC
The assertion introduce in the fix for Bug#13817703
is too strong, a negative number can be greater
than the column max value, when the column value is
a negative number.
rb://978 Approved by Jimmy Yang.
rb:1236 approved by Marko Makela
NUMBERS
If a system variable was declared as deprecated without mention of an
alternative, the message would look funny, e.g. for @@delayed_insert_limit:
Warning 1287 '@@delayed_insert_limit' is deprecated and
will be removed in MySQL .
The message was meant to display the version number, but it's not
possible to give one when declaring a system variable.
The fix does two things:
1) The definition of the message
ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT is changed so that it does
not display a version number. I.e. in English the message now reads:
Warning 1287 The syntax '@@delayed_insert_limit' is deprecated and
will be removed in a future version.
2) The message ER_WARN_DEPRECATED_SYNTAX_WITH_VER is discontinued in
favor of ER_WARN_DEPRECATED_SYNTAX for system variables. This change
was already done in versions 5.6 and above as part of wl#5265. This
part is simply back-ported from the worklog.
WARNING
This patch is for mysql-5.5 only,
to be null-merged to mysql-5.6 and mysql-trunk.
This is a partial rollback of the file io instrumentation,
removing the instrumentation for mysql_file_stat in the archive engine.
See the bug comments for details.
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
Fixed error in test that caused following tests to fail
extra/yassl/taocrypt/src/dsa.cpp:
Fixed compiler warning by adding cast
mysql-test/suite/rpl/t/rpl_start_slave_deadlock_sys_vars.test:
We have to first test for have_debug_sync to not start master wrongly
plugin/auth_pam/auth_pam.c:
Fixed compiler warning
sql/sys_vars.h:
Fixed compiler warning (Sys_var_max_user_conn is now signed)
support-files/compiler_warnings.supp:
Don't give warnings for auth_pam.c (Tried to fix it by changing the code, but could not find an easy way to do that on solaris)
mysql-test/suite/maria/lock.result:
Added test case
mysql-test/suite/maria/lock.test:
Added test case
sql/sql_table.cc:
One can't call HA_EXTRA_FORCE_REOPEN on something that may be opened twice.
It's safe to remove the call in this case as we will call HA_EXTRA_PREPARE_FOR_DROP for the table anyway.
(One nice side effect is that drop is a bit faster as we are not flushing the cache to disk before the drop anymore)
Starting the SQL thread might deadlock with reading the values of the
replication filtering options.
The deadlock is due to a lock order violation when the variables are
read or set. For example, reading replicate_ignore_table first
acquires LOCK_global_system_variables in sys_var::value_ptr and later
acquires LOCK_active_mi in Sys_var_rpl_filter::global_value_ptr. This
violates the order established when starting a SQL thread, where
LOCK_active_mi is acquired before start_slave, and ends up creating a
thread (handle_slave_sql) that allocates a THD handle whose
constructor acquires LOCK_global_system_variables in THD::init.
The solution is to unlock LOCK_global_system_variables before the
replication filtering options are set or read. This way the lock
order is preserved and the data being read/set is still protected
given that it acquires LOCK_active_mi.
mysql-test/suite/heap/heap.result:
Added test case for MDEV-436
mysql-test/suite/heap/heap.test:
Added test case for MDEV-436
storage/heap/hp_block.c:
Don't allocate a set of HP_PTRS when not needed. This saves us about 1024 bytes for most allocations.
storage/heap/hp_create.c:
Made the initial allocation of block sizes depending on min_records and max_records.
