causes full table lock on innodb table.
Also fixes Bug#28502 Triggers that update another innodb table
will block on X lock unnecessarily (duplciate).
Code review fixes.
Both bugs' synopses are misleading: InnoDB table is
not X locked. The statements, however, cannot proceed concurrently,
but this happens due to lock conflicts for tables used in triggers,
not for the InnoDB table.
If a user had an InnoDB table, and two triggers, AFTER UPDATE and
AFTER INSERT, competing for different resources (e.g. two distinct
MyISAM tables), then these two triggers would not be able to execute
concurrently. Moreover, INSERTS/UPDATES of the InnoDB table would
not be able to run concurrently.
The problem had other side-effects (see respective bug reports).
This behavior was a consequence of a shortcoming of the pre-locking
algorithm, which would not distinguish between different DML operations
(e.g. INSERT and DELETE) and pre-lock all the tables
that are used by any trigger defined on the subject table.
The idea of the fix is to extend the pre-locking algorithm to keep track,
for each table, what DML operation it is used for and not
load triggers that are known to never be fired.
The need arose when working on Bug 26141, where it became
necessary to replace TABLE_LIST with its forward declaration in a few
headers, and this involved a lot of s/TABLE_LIST/st_table_list/.
Although other workarounds exist, this patch is in line
with our general strategy of moving away from typedef-ed names.
Sometime in future we might also rename TABLE_LIST to follow the
coding style, but this is a huge change.
This bug may manifest itself for select queries over a multi-table view
that includes an ORDER BY clause in its definition. If the select list of
the query contains references to the same view column with different
aliases the names of the columns in the result output will be nevertheless
the same, coinciding with one of the alias.
The bug happened because the method Item_ref::get_tmp_table_item that
was inherited by the class Item_direct_view_ref ignored the fact that
the name of the view column reference must be inherited by the fields
of the temporary table that was created in order to get the result rows
sorted.
SHOW CREATE TABLE or SELECT FROM I_S.
Actually, the bug discovers two problems:
- the original query is not preserved properly. This is the problem
of BUG#16291;
- the resultset of SHOW CREATE TABLE statement is binary.
This patch fixes the second problem for the 5.0.
Both problems will be fixed in 5.1.
For a join query with GROUP BY and/or ORDER BY and a view reference
in the FROM list the metadata erroneously showed empty table aliases
and database names for the view columns.
This bug was introduced by the fix for the bug#27300. In this fix a section
of code was added to the Item::tmp_table_field_from_field_type method.
This section intended to create Field_geom fields for the Item_geometry_func
class and its descendants. In order to get the geometry type of the current
item it casted "this" to the Item_geometry_func* type. But the
Item::tmp_table_field_from_field_type method is also used for creation of
fields for UNION and in this case this method is called for an object of the
Item_type_holder class and the cast to the Item_geometry_func* type causes
a server crash.
Now the Item::tmp_table_field_from_field_type method correctly works when it's
called for both the Item_type_holder and the Item_geometry_func classes.
The new geometry_type variable is added to the Item_type_holder class.
The new method called get_geometry_type is added to the Item_field
and the Field classes. It returns geometry type from the field for the
Item_field and the Field_geom classes and fails an assert for other Field
descendants.
Problem: we may get syntactically incorrect queries in the binary log
if we use a string value user variable executing a PS which
contains '... limit ?' clause, e.g.
prepare s from "select 1 limit ?";
set @a='qwe'; execute s using @a;
Fix: raise an error in such cases.
Made year 2000 handling more uniform
Removed year 2000 handling out from calc_days()
The above removes some bugs in date/datetimes with year between 0 and 200
Now we get a note when we insert a datetime value into a date column
For default values to CREATE, don't give errors for warning level NOTE
Fixed some compiler failures
Added library ws2_32 for windows compilation (needed if we want to compile with IOCP support)
Removed duplicate typedef TIME and replaced it with MYSQL_TIME
Better (more complete) fix for: Bug#21103 "DATE column not compared as DATE"
Fixed properly Bug#18997 "DATE_ADD and DATE_SUB perform year2K autoconversion magic on 4-digit year value"
Fixed Bug#23093 "Implicit conversion of 9912101 to date does not match cast(9912101 as date)"
The LEAST/GREATEST functions compared DATE/DATETIME values as
strings which in some cases could lead to a wrong result.
A new member function called cmp_datetimes() is added to the
Item_func_min_max class. It compares arguments in DATETIME context
and returns index of the least/greatest argument.
The Item_func_min_max::fix_length_and_dec() function now detects when
arguments should be compared in DATETIME context and sets the newly
added flag compare_as_dates. It indicates that the cmp_datetimes() function
should be called to get a correct result.
Item_func_min_max::val_xxx() methods are corrected to call the
cmp_datetimes() function when needed.
Objects of the Item_splocal class now stores and reports correct original
field type.
DATE and DATETIME can be compared either as strings or as int. Both
methods have their disadvantages. Strings can contain valid DATETIME value
but have insignificant zeros omitted thus became non-comparable with
other DATETIME strings. The comparison as int usually will require conversion
from the string representation and the automatic conversion in most cases is
carried out in a wrong way thus producing wrong comparison result. Another
problem occurs when one tries to compare DATE field with a DATETIME constant.
The constant is converted to DATE losing its precision i.e. losing time part.
This fix addresses the problems described above by adding a special
DATE/DATETIME comparator. The comparator correctly converts DATE/DATETIME
string values to int when it's necessary, adds zero time part (00:00:00)
to DATE values to compare them correctly to DATETIME values. Due to correct
conversion malformed DATETIME string values are correctly compared to other
DATE/DATETIME values.
As of this patch a DATE value equals to DATETIME value with zero time part.
For example '2001-01-01' equals to '2001-01-01 00:00:00'.
The compare_datetime() function is added to the Arg_comparator class.
It implements the correct comparator for DATE/DATETIME values.
Two supplementary functions called get_date_from_str() and get_datetime_value()
are added. The first one extracts DATE/DATETIME value from a string and the
second one retrieves the correct DATE/DATETIME value from an item.
The new Arg_comparator::can_compare_as_dates() function is added and used
to check whether two given items can be compared by the compare_datetime()
comparator.
Two caching variables were added to the Arg_comparator class to speedup the
DATE/DATETIME comparison.
One more store() method was added to the Item_cache_int class to cache int
values.
The new is_datetime() function was added to the Item class. It indicates
whether the item returns a DATE/DATETIME value.
The Item_outer_ref class based on the Item_direct_ref class was always used
to represent an outer field. But if the outer select is a grouping one and the
outer field isn't under an aggregate function which is aggregated in that
outer select an Item_ref object should be used to represent such a field.
If the outer select in which the outer field is resolved isn't grouping then
the Item_field class should be used to represent such a field.
This logic also should be used for an outer field resolved through its alias
name.
Now the Item_field::fix_outer_field() uses Item_outer_field objects to
represent aliased and non-aliased outer fields for grouping outer selects
only.
Now the fix_inner_refs() function chooses which class to use to access outer
field - the Item_ref or the Item_direct_ref. An object of the chosen class
substitutes the original field in the Item_outer_ref object.
The direct_ref and the found_in_select_list fields were added to the
Item_outer_ref class.
To correctly decide which predicates can be evaluated with a given table
the optimizer must know the exact set of tables that a predicate depends
on. If that mask is too wide (refer to non-existing tables) the optimizer
can erroneously skip a predicate.
One such case of wrong table usage mask were the aggregate functions.
The have a all-1 mask (meaning depend on all tables, including non-existent
ones).
Fixed by making a real used_tables mask for the aggregates. The mask is
constructed in the following way :
1. OR the table dependency masks of all the arguments of the aggregate.
2. If all the arguments of the function are from the local name resolution
context and it is evaluated in the same name resolution
context where it is referenced all the tables from that name resolution
context are OR-ed to the dependency mask. This is to denote that an
aggregate function depends on the number of rows it processes.
3. Handle correctly the case of an aggregate function optimization (such that
the aggregate function can be pre-calculated and made a constant).
Made sure that an aggregate function is never a constant (unless subject of a
specific optimization and pre-calculation).
One other flaw was revealed and fixed in the process : references were
not calling the recalculation method for used_tables of their targets.
when the column is to be read from a derived table column which
was specified as a concatenation of string literals.
The bug happened because the Item_string::append did not adjust the
value of Item_string::max_length. As a result of it the temporary
table column defined to store the concatenation of literals was
not wide enough to hold the whole value.
The flag alias_name_used was not set on for the outer references
in subqueries. It resulted in replacement of any outer reference
resolved against an alias for a full field name when the frm
representation of a view with a subquery was generated.
If the subquery and the outer query referenced the same table in
their from lists this replacement effectively changed the meaning
of the view and led to wrong results for selects from this view.
Modified several functions to ensure setting the right value of
the alias_name_used flag for outer references resolved against
aliases.
Several problems here :
1. The conversion to double of an hex string const item
was not taking into account the unsigned flag.
2. IN was not behaving in the same was way as comparisons
when performed over an INT/DATE/DATETIME/TIMESTAMP column
and a constant. The ordinary comparisons in that case
convert the constant to an INTEGER value and do int
comparisons. Fixed the IN to do the same.
3. IN is not taking into account the unsigned flag when
calculating <expr> IN (<int_const1>, <int_const2>, ...).
Extended the implementation of IN to store and process
the unsigned flag for its arguments.
created for sorting.
Any outer reference in a subquery was represented by an Item_field object.
If the outer select employs a temporary table all such fields should be
replaced with fields from that temporary table in order to point to the
actual data. This replacement wasn't done and that resulted in a wrong
subquery evaluation and a wrong result of the whole query.
Now any outer field is represented by two objects - Item_field placed in the
outer select and Item_outer_ref in the subquery. Item_field object is
processed as a normal field and the reference to it is saved in the
ref_pointer_array. Thus the Item_outer_ref is always references the correct
field. The original field is substituted for a reference in the
Item_field::fix_outer_field() function.
New function called fix_inner_refs() is added to fix fields referenced from
inner selects and to fix references (Item_ref objects) to these fields.
The new Item_outer_ref class is a descendant of the Item_direct_ref class.
It additionally stores a reference to the original field and designed to
behave more like a field.
Several problems fixed:
1. There was a "catch-all" context initialization in setup_tables()
that was causing the table that we insert into to be visible in the
SELECT part of an INSERT .. SELECT .. statement with no tables in
its FROM clause. This was making sure all the under-initialized
contexts in various parts of the code are not left uninitialized.
Fixed by removing the "catch-all" statement and initializing the
context in the parser.
2. Incomplete name resolution context when resolving the right-hand
values in the ON DUPLICATE KEY UPDATE ... part of an INSERT ... SELECT ...
caused columns from NATURAL JOIN/JOIN USING table references in the
FROM clause of the select to be unavailable.
Fixed by establishing a proper name resolution context.
3. When setting up the special name resolution context for problem 2
there was no check for cases where an aggregate function without a
GROUP BY effectively takes the column from the SELECT part of an
INSERT ... SELECT unavailable for ON DUPLICATE KEY UPDATE.
Fixed by checking for that condition when setting up the name
resolution context.
UPDATE contains wrong data if the SELECT employs a temporary table.
If the UPDATE values of the INSERT .. SELECT .. ON DUPLICATE KEY UPDATE
statement contains fields from the SELECT part and the select employs a
temporary table then those fields will contain wrong values because they
aren't corrected to get data from the temporary table.
The solution is to add these fields to the selects all_fields list,
to store pointers to those fields in the selects ref_pointer_array and
to access them via Item_ref objects.
The substitution for Item_ref objects is done in the new function called
Item_field::update_value_transformer(). It is called through the
item->transform() mechanism at the end of the select_insert::prepare()
function.
on duplicate key".
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE which was used in
stored routine or as prepared statement and which in its ON DUPLICATE
KEY clause erroneously tried to assign value to a column mentioned only
in its SELECT part was properly emitting error on the first execution
but succeeded on the second and following executions.
Code which is responsible for name resolution of fields mentioned in
UPDATE clause (e.g. see select_insert::prepare()) modifies table list
and Name_resolution_context used in this process. It uses
Name_resolution_context_state::save_state/restore_state() to revert
these modifications. Unfortunately those two methods failed to revert
properly modifications to TABLE_LIST::next_name_resolution_table
and this broke name resolution process for successive executions.
This patch fixes Name_resolution_context_state::save_state/restore_state()
in such way that it properly handles TABLE_LIST::next_name_resolution_table.
in a select list.
The objects of the Item_trigger_field class inherited the implementations
of the methods copy_or_same, get_tmp_table_item and get_tmp_table_field
from the class Item_field while they rather should have used the default
implementations defined for the base class Item.
It could cause catastrophic problems for triggers that used SELECTs
with select list containing trigger fields such as NEW.<table column>
under DISTINCT.
Currently in the ONLY_FULL_GROUP_BY mode no hidden fields are allowed in the
select list. To ensure this each expression in the select list is checked
to be a constant, an aggregate function or to occur in the GROUP BY list.
The last two requirements are wrong and doesn't allow valid expressions like
"MAX(b) - MIN(b)" or "a + 1" in a query with grouping by a.
The correct check implemented by the patch will ensure that:
any field reference in the [sub]expressions of the select list
is under an aggregate function or
is mentioned as member of the group list or
is an outer reference or
is part of the select list element that coincide with a grouping element.
The Item_field objects now can contain the position of the select list
expression which they belong to. The position is saved during the
field's Item_field::fix_fields() call.
The non_agg_fields list for non-aggregated fields is added to the SELECT_LEX
class. The SELECT_LEX::cur_pos_in_select_list now contains the position in the
select list of the expression being currently fixed.
Corrected spelling in copyright text
Makefile.am:
Don't update the files from BitKeeper
Many files:
Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
Adjusted year(s) in copyright header
Many files:
Added GPL copyright text
Removed files:
Docs/Support/colspec-fix.pl
Docs/Support/docbook-fixup.pl
Docs/Support/docbook-prefix.pl
Docs/Support/docbook-split
Docs/Support/make-docbook
Docs/Support/make-makefile
Docs/Support/test-make-manual
Docs/Support/test-make-manual-de
Docs/Support/xwf
We use val_int() calls (followed by null_value check) to determine
nullness in some Item_sum_count' and Item_sum_count_distinct' methods,
as a side effect we get extra warnings raised in the val_int().
Fix: use is_null() instead.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
