The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection. Restarting master server can bring two problems as following:
1. The time out error is encountered sporadically. The slave I/O thread tries
to reconnect master ten times, which is set in my.cnf. So in the test
framework sporadically the slave I/O thread really stoped when it can't
reconnect to master in the ten times successfully before the master starts,
then the time out error will be encountered while waiting for the slave to
start.
2. These warnings and errors are produced in server log file when
the slave I/O thread tries to get the values of the UNIX_TIMESTAMP,
SERVER_ID from master under the transient network disconnection.
To fix problem 1, increase the master retry count to sixty times,
so that the slave I/O thread has enough time to reconnect master
successfully.
To fix problem 2, suppress these warnings and errors by mtr suppression,
because they are expected.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock-slave.opt:
Added the *.opt file for increasing master retry count to
sixty times.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added mtr suppression for suppressing warnings and errors
in server log file.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
Bug#46539 Various crashes on INSERT IGNORE SELECT + SELECT FOR UPDATE.
If a transaction was rolled back inside InnoDB due to a deadlock
or lock wait timeout, and the statement had IGNORE clause,
the server could crash at the end of the statement or on shutdown.
This was caused by the error handling infrastructure's attempt to
ignore a non-ignorable error.
When a transaction rollback request is raised, switch off
current_select->no_error flag, so that the following error
won't be ignored.
Instead, we could add !thd->is_fatal_sub_stmt_error to
my_message_sql(), but since in write_record() we switch
off no_error, the same approach is used in
thd_mark_transaction_to_rollback().
@todo: call thd_mark_transaction_to_rollback() from
handler::print_error(), then we can easily make sure
that the error reported by print_error is not ignored.
mysql-test/r/innodb_lock_wait_timeout_1.result:
Update results (Bug#46539).
mysql-test/t/innodb_lock_wait_timeout_1.test:
Add a test case for Bug#46539
sql/sql_class.cc:
When a transaction rollback request is raised, switch of
current_select->no_error flag, so that the following error
won't be ignored.
Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.
sql/item_sum.cc:
In Item_sum::set_aggregator(): re-use existing Aggregator if already set.
Remove some friend declarations, add some accessor functions.
Cleanup some DBUG_ENTER and DBUG_RETURN code.
sql/item_sum.h:
Make some member fields private, add accessors instead.
Remove some un-necessary friend declarations.
Remove some default arguments from constructors.
sql/opt_sum.cc:
Use accessor functions in Item_sum.
sql/sql_select.cc:
Fix mis-spelled DBUG_ENTER text.
Use accessor functions in Item_sum.
sql/sql_yacc.yy:
Use explicit true/false rather than default arguments when constructing
Item_sum_xxx objects.
(backport)
mysql_upgrade script accepts --upgrade-system-tables option,
fixing only system tables in this case.
per-file comments:
client/mysql_upgrade.c
WL#4991 mysql_upgrade --fix-privilege-tables
--upgrade-system-tables option added.
if it is set, the tool won't look for the mysqlcheck then
run_mysqlcheck_fixnames() and run_mysqlcheck_upgrade won't be called.
mysql-test/r/mysql_upgrade.result
WL#4991 mysql_upgrade --fix-privilege-tables
test result added
mysql-test/t/mysql_upgrade.test
WL#4991 mysql_upgrade --fix-privilege-tables
test case added
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
BUG#47073 - valgrind errs, corruption,failed repair of partition,
low myisam_sort_buffer_size
Fixed race conditions discovered with the provided test case and
stabilized test case.
include/myisam.h:
Serialize submission of messages from multi-threaded REPAIR.
mysql-test/r/myisam.result:
REPAIR output highly depend on threads activity. Disabled
result log to make test case deterministic.
mysql-test/t/myisam.test:
REPAIR output highly depend on threads activity. Disabled
result log to make test case deterministic.
storage/myisam/ha_myisam.cc:
Serialize submission of messages from multi-threaded REPAIR.
storage/myisam/mi_check.c:
Serialize submission of messages from multi-threaded REPAIR.
storage/myisam/sort.c:
Only master thread is allowed to detach write cache from
the share.
"What do you mean, there's a bug? There isn't even code!"
There was some token code for plug-in variables of the SET type,
but clearly this never worked, or was subject to massive bit rot
since. Bug-fixes ... fail-safes ... tests -- fais au mieux, mon chou!
mysys/my_getopt.c:
SETs set-up should set up a default value, but no min/max bounding.
mysys/typelib.c:
fail-safe requested by serg: don't try to skip separator when we're
already at end of string.
sql/sql_plugin.cc:
check_func_set:
Initialize error_len as find_set() will only update it on error,
and we're using the value to see whether an error has occurred (!= 0),
so we'd better not have a random val in there.
value_ptr:
There's no guarantee we're handed string lengths, so play it safe!
Use prepared string lengths where possible for minimum speed gain,
otherwise determine on the fly!
Disabled execution of this test for embedded server until fix for
bug 41971 'Thread state on embedded server is always "Writing to net"'
is back-ported to this tree.
BUG#41597 - After rename of user, there are additional grants
when grants are reapplied.
Fixed build failure on Windows. Added missing cast.
sql/sql_acl.cc:
Fixed build failure on Windows. Added missing cast.
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
mysql-test/include/have_case_insensitive_fs.inc:
test case
mysql-test/r/case_insensitive_fs.require:
test case
mysql-test/r/grant_lowercase_fs.result:
test result
mysql-test/r/lowercase_fs_off.result:
test result
mysql-test/r/ps_grant.result:
test result
mysql-test/r/system_mysql_db.result:
changed Routine_name field collation to case insensitive
mysql-test/t/grant_lowercase_fs.test:
test case
mysql-test/t/lowercase_fs_off.test:
test case
scripts/mysql_system_tables.sql:
changed Routine_name field collation to case insensitive
scripts/mysql_system_tables_fix.sql:
changed Routine_name field collation to case insensitive
sql/sql_acl.cc:
Problem 1:
column_priv_hash uses utf8_general_ci collation
for the key comparison. The key consists of user name,
db name and table name. Thus user with privileges on table t1
is able to perform the same operation on T1
(the similar situation with user name & db name, see acl_cache).
So collation which is used for column_priv_hash and acl_cache
should be case sensitive.
The fix:
replace system_charset_info with my_charset_utf8_bin for
column_priv_hash and acl_cache
Problem 2:
The same situation with proc_priv_hash, func_priv_hash,
the only difference is that Routine name is case insensitive.
So the fix is to use my_charset_utf8_bin for
proc_priv_hash & func_priv_hash and convert routine name into lower
case before writing the element into the hash and
before looking up the key.
Additional fix: mysql.procs_priv Routine_name field collation
is changed to utf8_general_ci.
It's necessary for REVOKE command
(to find a field by routine hash element values).
Note:
It's safe for lower-case-table-names mode too because
db name & table name are converted into lower case
(see GRANT_NAME::GRANT_NAME).
Concurrent execution of statements which require non-table-level
write locks on several instances of the same table (such as
SELECT ... FOR UPDATE which uses same InnoDB table twice or a DML
statement which invokes trigger which tries to update same InnoDB
table directly and through stored function) and statements which
required table-level locks on this table (e.g. LOCK TABLE ... WRITE,
ALTER TABLE, ...) might have resulted in a deadlock.
The problem occured when a thread tried to acquire write lock
(TL_WRITE_ALLOW_WRITE) on the table but had to wait since there was
a pending write lock (TL_WRITE, TL_WRITE_ALLOW_READ) on this table
and we failed to detect that this thread already had another instance
of write lock on it (so in fact we were trying to acquire recursive
lock) because there was also another thread holding write lock on the
table (also TL_WRITE_ALLOW_WRITE). When the latter thread released
its lock neither the first thread nor the thread trying to acquire
TL_WRITE/TL_WRITE_ALLOW_READ were woken up (as table was still write
locked by the first thread) so we ended up with a deadlock.
This patch solves this problem by ensuring that thread which
already has write lock on the table won't wait when it tries
to acquire second write lock on the same table.
mysql-test/r/lock_sync.result:
Added test case for bug #45143 "All connections hang on concurrent
ALTER TABLE".
mysql-test/t/lock_sync.test:
Added test case for bug #45143 "All connections hang on concurrent
ALTER TABLE".
mysys/thr_lock.c:
Ensured that thread can acquire write lock on the table without
waiting if it already has write lock on it even if there are other
threads holding write locks on this table (this is normal situation
for, e.g., TL_WRITE_ALLOW_WRITE type of lock).
Adjusted comments to better explain why it is OK to do so and added
asserts to prevent introduction of scenarios in which this can cause
problems.
The problem here is that the latest innodb push contains
both MYSQL_STORAGE_ENGINE(INNOBASE) and MYSQL_STORAGE_ENGINE(INNOBASE)
in the same CMakeLists.txt, to make the resulting library
ha_innodb.dll, instead of ha_innobase.dll.
Using multiple MYSQL_STORAGE_ENGINE within the same CMakeLists.txt
conflicts with the fix for the bug Bug #47795 "CMake, storage engine
name different from directory name". Top-level CMakeLists.txt now
parses storage engine's CMakeLists.txt to extract engines name from
MYSQL_STORAGE_ENGINE().
For innodb, it concludes that there is not storage engine named
INNOBASE, hence WITH_INNOBASE_STORAGE_ENGINE has no effect.
The fix is to use SET_TARGET_PROPERTIES(... PROPERTIES OUTPUT_NAME ...),
instead of renaming the engine to have plugins named ha_innodb.dll.
