Problem was in a combination of LOCK TABLES on several Aria
tables followed by an ALTER TABLE. After the ALTER TABLE there
was a force close + reopen of the alter table. The close failed
because the table was still part of a transaction.
Fixed by calling extra(HA_EXTRA_PREPARE_FOR_FORCED_CLOSE) as
part of closing the table, which ensures that the table is not
anymore part of the current transaction.
Proper C-style type erasure is done via void*, not via char* or something else.
free_key_cache()
free_rpl_filter(): types were fixed to avoid function pointer type cast which
is still undefined behavior.
Note, that casting from void* to any other pointer type is safe and correct.
Analysis
Mysqlbinlog output for encrypted binary log
#Q> insert into tab1 values (3,'row 003')
#190912 17:36:35 server id 10221 end_log_pos 980 CRC32 0x53bcb3d3 Table_map: `test`.`tab1` mapped to number 19
# at 940
#190912 17:36:35 server id 10221 end_log_pos 1026 CRC32 0xf2ae5136 Write_rows: table id 19 flags: STMT_END_F
Here we can see Table_map_log_event ends at 980 but Next event starts at 940.
And the reason for that is we do not send START_ENCRYPTION_EVENT to the slave
Solution:-
Send Start_encryption_log_event as Ignorable_log_event to slave(mysqlbinlog),
So that mysqlbinlog can update its log_pos.
Since Slave can request multiple FORMAT_DESCRIPTION_EVENT while master does not
have so We only update slave master pos when master actually have the
FORMAT_DESCRIPTION_EVENT. Similar logic should be applied for START_ENCRYPTION_EVENT.
Also added the test case when new server reads the data from old server which
does not send START_ENCRYPTION_EVENT to slave.
Master Slave Upgrade Scenario.
When Slave is updated first, Slave will have extra logic of handling
START_ENCRYPTION_EVENT But master willnot be sending START_ENCRYPTION_EVENT.
So there will be no issue.
When Master is updated first, It will send START_ENCRYPTION_EVENT to
slave , But slave will ignore this event in queue_event.
read_statistics_for_tables_if_needed
Regression after 279a907, read_statistics_for_tables_if_needed() was
called after open_normal_and_derived_tables() failure.
Fixed by moving read_statistics_for_tables() call to a branch of
get_schema_stat_record() where result of open_normal_and_derived_tables()
is checked.
Removed THD::force_read_stats, added read_statistics_for_tables() instead.
Simplified away statistics_for_command_is_needed().
For release builds, do not declare unused variables.
unpack_row(): Omit a debug-only variable from WSREP diagnostic message.
create_wsrep_THD(): Fix -Wmaybe-uninitialized for the PSI_thread_key.
Analysis:
========
In general if there are three groups.
1 - Inserts 32 which fails due to local entry '32' on slave.
2 - Inserts 33
3 - Inserts 34
Each group considers itself as a waiter and it waits for prior group 'waitee'.
This is done in 'register_wait_for_prior_event_group_commit'. If there is no
other parallel group being scheduled then no waitee will be there.
Let us assume 3 groups are being scheduled in parallel.
3-> waits for 2-> waits for->1
'1' upon completion it checks is there any registered subsequent waiter. If
so it wakes up the subsequent waiter with its execution status. This execution
status is stored in wakeup_error.
If '1' failed then it sends corresponding wakeup_error to 2. Then '2' aborts
and it propagates error to '3'. So all further commits are aborted. This
mechanism works only when all transactions reach a stage where they are
waiting for their prior commit to complete.
In case of optimistic following scenario occurs.
1,2,3 are scheduled in parallel.
3 - Reaches group_commit_code waits for 2 to complete.
1 - errors out sets stop_on_error_sub_id=1.
When a group execution results in error its corresponding sub_id is set to
'stop_on_error_sub_id'. Any new groups queued for execution will check if
their sub_id is > stop_on_error_sub_id. If it is true their execution will be
skipped as prior group execution failed. 'skip_event_group=1' will be set.
Since the execution of SQL thread is about to stop we just skip execution of
all the following event groups. We still do all the normal waiting and wakeup
processing between the event groups as a simple way to ensure that everything
is stopped and cleaned up correctly.
Upon error '1' transaction checks for registered waiters. Since no one is
there it simply goes away.
2 - Starts the execution. It checks do I have a waitee.
Since wait_commit_sub_id == entry->last_committed_sub_id no waitee is set.
Secondly: 'entry->stop_on_error_sub_id' is set by '1'st execution. Now
'handle_parallel_thread' code checks if the current group 'sub_id' is greater
than the 'sub_id' set within 'stop_on_error_sub_id'.
Since the above is true 'skip_event_group=true' is set. Simply call
'wait_for_prior_commit' to wakeup all waiters. Group '2' didn't had any
waitee and its execution is skipped. Hence its wakeup_error=0.It sends a
positive wakeup signal to '3'. Which commits. This results in a missed
transaction. i.e 33 is missed and 34 is committed.
Fix:
===
When a worker learns that an earlier transaction execution has failed, and it
should not proceed for further execution, it should mark its own execution
status as failed so that it alerts its followers to abort as well.
For CMAKE_BUILD_TYPE=Debug, the default MYSQL_MAINTAINER_MODE=AUTO
implies -Werror along with other flags in cmake/maintainer.cmake,
which would break the debug builds when CMAKE_CXX_FLAGS include -O2.
This fix includes a backport of 6dd3f24090
from MariaDB 10.3.
Also fixes:
MDEV-20560 Assertion `precision > 0' failed in decimal_bin_size upon SELECT with MOD short unsigned decimal
Changing the way how Item_func_mod calculates its max_length.
It now uses decimal_precision(), decimal_scale() and unsigned_flag
of its arguments, like all other Item_num_op descendants do.
In the function test_if_cheaper_ordering we make a decision if using an index is better than
using filesort for ordering. If we chose to do range access then in test_quick_select we
should make sure that cost for table scan is set to DBL_MAX so that it is not picked.
The flag is_stat_field is not set for the min_value and max_value of field items
inside table share. This is a must requirement as we don't want to throw
warnings of truncation when we read values from the statistics table to the column
statistics of table share fields.
Command COM_SHUTDOWN was rejected in non-Primary because
server_command_flags[COM_SHUTDOWN] had value CF_NO_COM_MULTI
instead of CF_SKIP_WSREP_CHECK.
As a fix removed assignment
server_command_flags[CF_NO_COM_MULTI]= CF_NO_COM_MULTI
which overwrote server_command_flags[COM_SHUTDOWN].
selectivity values fails
After having set the assertion that checks validity of selectivity values
returned by the function table_cond_selectivity() a test case from
order_by.tesst failed. The failure occurred because range optimizer could
return as an estimate of the cardinality of the ranges built for an index
a number exceeding the total number of records in the table.
The second bug is more subtle. It may happen when there are several
indexes with same prefix defined on the first joined table t accessed by
a constant ref access. In this case the range optimizer estimates the
number of accessed records of t for each usable index and these
estimates can be different. Only the first of these estimates is taken
into account when the selectivity of the ref access is calculated.
However the optimizer later can choose a different index that provides
a different estimate. The function table_condition_selectivity() could use
this estimate to discount the selectivity of the ref access. This could
lead to an selectivity value returned by this function that was greater
that 1.
best_access_path() is called from two optimization phases:
1. Plan choice phase, in choose_plan(). Here, the join prefix being
considered is in join->positions[]
2. Plan refinement stage, in fix_semijoin_strategies_for_picked_join_order
Here, the join prefix is in join->best_positions[]
It used to access join->positions[] from stage #2. This didnt cause any
valgrind or asan failures (as join->positions[] has been written-to before)
but the effect was similar to that of reading the random data:
The join prefix we've picked (in join->best_positions) could have
nothing in common with the join prefix that was last to be considered
(in join->positions).
The most likely cause of the crash is that a timer fired, after it was closed.
MSDN documents such a possibility, in the documentation for
CloseThreadpoolTimer() function, and recommends disabling the timer before
calling WaitForThreadpoolTimerCallbacks()/CloseThreadpoolTimer().
The fix follows this recommendation.
Note, that 5.5-10.1 disabled the timer before close, but this code
was lost in threadpool refactoring in 10.2
For Visual Studio generator, use a per-config .def/.lib files with symbols
exported from mysqld.exe
Functions exported from mysqld.exe may differ between debug/optimized
compilation, e.g dbug functions are missing in release config.
InnoDB intentionally (it's a documented behavior) ignores changing of
DATA DIRECTORY and INDEX DIRECTORY for partitions. Though we should
issue warning when this happens.
After SST from master node (the one where event is ENABLED) - you will end up with the event enabled on two nodes, hence it's now being executed twice. It can be solved by comparing event's originator with server_id. if not equal, then change its status to 'SLAVESIDE_DISABLED'
Changes to be committed:
new file: mysql-test/suite/galera/r/galera_events2.result
new file: mysql-test/suite/galera/t/galera_events2.test
modified: sql/events.cc
remove a special treatment of a bare DEFAULT keyword that made it
behave inconsistently and differently from DEFAULT(column).
Now all forms of the explicit assignment of a default column value
behave identically, and all count as an explicitly assigned value
(for the purpose of ON UPDATE NOW).
followup for c7c481f4d9
MySQL 5.7.9 (and MariaDB 10.2.2) introduced a race condition
between InnoDB transaction commit and the conversion of implicit
locks into explicit ones.
The assertion failure can be triggered with a test that runs
3 concurrent single-statement transactions in a loop on a simple
table:
CREATE TABLE t (a INT PRIMARY KEY) ENGINE=InnoDB;
thread1: INSERT INTO t SET a=1;
thread2: DELETE FROM t;
thread3: SELECT * FROM t FOR UPDATE; -- or DELETE FROM t;
The failure scenarios are like the following:
(1) The INSERT statement is being committed, waiting for lock_sys->mutex.
(2) At the time of the failure, both the DELETE and SELECT transactions
are active but have not logged any changes yet.
(3) The transaction where the !other_lock assertion fails started
lock_rec_convert_impl_to_expl().
(4) After this point, the commit of the INSERT removed the transaction from
trx_sys->rw_trx_set, in trx_erase_lists().
(5) The other transaction consulted trx_sys->rw_trx_set and determined
that there is no implicit lock. Hence, it grabbed the lock.
(6) The !other_lock assertion fails in lock_rec_add_to_queue()
for the lock_rec_convert_impl_to_expl(), because the lock was 'stolen'.
This assertion failure looks genuine, because the INSERT transaction
is still active (trx->state=TRX_STATE_ACTIVE).
The problematic step (4) was introduced in
mysql/mysql-server@e27e0e0bb7
which fixed something related to MVCC (covered by the test
innodb.innodb-read-view). Basically, it reintroduced an error
that had been mentioned in an earlier commit
mysql/mysql-server@a17be6963f:
"The active transaction was removed from trx_sys->rw_trx_set prematurely."
Our fix goes along the following lines:
(a) Implicit locks will released by assigning
trx->state=TRX_STATE_COMMITTED_IN_MEMORY as the first step.
This transition will no longer be protected by lock_sys_t::mutex,
only by trx->mutex. This idea is by Sergey Vojtovich.
(b) We detach the transaction from trx_sys before starting to release
explicit locks.
(c) All callers of trx_rw_is_active() and trx_rw_is_active_low() must
recheck trx->state after acquiring trx->mutex.
(d) Before releasing any explicit locks, we will ensure that any activity
by other threads to convert implicit locks into explicit will have ceased,
by checking !trx_is_referenced(trx). There was a glitch
in this check when it was part of lock_trx_release_locks(); at the end
we would release trx->mutex and acquire lock_sys->mutex and trx->mutex,
and fail to recheck (trx_is_referenced() is protected by trx_t::mutex).
(e) Explicit locks can be released in batches (LOCK_RELEASE_INTERVAL=1000)
just like we did before.
trx_t::state: Document that the transition to COMMITTED is only
protected by trx_t::mutex, no longer by lock_sys_t::mutex.
trx_rw_is_active_low(), trx_rw_is_active(): Document that the transaction
state should be rechecked after acquiring trx_t::mutex.
trx_t::commit_state(): New function to change a transaction to committed
state, to release implicit locks.
trx_t::release_locks(): New function to release the explicit locks
after commit_state().
lock_trx_release_locks(): Move much of the logic to the caller
(which must invoke trx_t::commit_state() and trx_t::release_locks()
as needed), and assert that the transaction will have locks.
trx_get_trx_by_xid(): Make the parameter a pointer to const.
lock_rec_other_trx_holds_expl(): Recheck trx->state after acquiring
trx->mutex, and avoid a redundant lookup of the transaction.
lock_rec_queue_validate(): Recheck impl_trx->state while holding
impl_trx->mutex.
row_vers_impl_x_locked(), row_vers_impl_x_locked_low():
Document that the transaction state must be rechecked after
trx_mutex_enter().
trx_free_prepared(): Adjust for the changes to lock_trx_release_locks().
Three issues here:
* ON UPDATE DEFAULT NOW columns were updated after generated columns
were computed - this broke indexed virtual columns
* ON UPDATE DEFAULT NOW columns were updated after BEFORE triggers,
so triggers didn't see the correct NEW value
* in case of a multi-update generated columns were also updated
after BEFORE triggers
on UPDATE, compare_record() was comparing all columns that are marked
for writing. But generated columns that are written to the table are
always deterministic and cannot change unless normal non-generated
columns were changed. So it's enough to compare only non-generated
columns that were explicitly assigned values in the SET clause.
* remove one level of virtual functions
* remove redundant checks
* remove an if() as the value is always known at compilation time
don't pretend that "DEFAULT expr" and "ON UPDATE DEFAULT NOW"
are "basically the same thing"
This patch allows the server to open old tables that have
"bad" generated columns (i.e. indexed virtual generated columns,
persistent generated columns) that depend on sql_mode,
for general things like SELECT, INSERT, DROP, etc.
Warning are issued in such cases.
Only these commands are now disallowed and return an error:
- CREATE TABLE introducing a "bad" generated column
- ALTER TABLE introducing a "bad" generated column
- CREATE INDEX introdicing a "bad" generated column
(i.e. adding an index on a virtual generated column
that depends on sql_mode).
Note, these commands are allowed:
- ALTER TABLE removing a "bad" generate column
- ALTER TABLE removing an index from a "bad" virtual generated column
- DROP INDEX removing an index from a "bad" virtual generated column
but only if the table does not have any "bad" columns as a result.
This change takes into account a column's GENERATED ALWAYS AS
expression dependcy on sql_mode's PAD_CHAR_TO_FULL_LENGTH and
NO_UNSIGNED_SUBTRACTION flags.
Indexed virtual columns as well as persistent generated columns are
now not allowed to have such dependencies to avoid inconsistent data
or index files on sql_mode changes.
So an error is now returned in cases like this:
CREATE OR REPLACE TABLE t1
(
a CHAR(5),
v VARCHAR(5) AS (a) PERSISTENT -- CHAR->VARCHAR or CHAR->TEXT = ERROR
);
Functions RPAD() and RTRIM() can now remove dependency on
PAD_CHAR_TO_FULL_LENGTH. So this can be used instead:
CREATE OR REPLACE TABLE t1
(
a CHAR(5),
v VARCHAR(5) AS (RTRIM(a)) PERSISTENT
);
Note, unlike CHAR->VARCHAR and CHAR->TEXT this still works,
not RPAD(a) is needed:
CREATE OR REPLACE TABLE t1
(
a CHAR(5),
v CHAR(5) AS (a) PERSISTENT -- CHAR->CHAR is OK
);
More sql_mode flags may affect values of generated columns.
They will be addressed separately.
See comments in sql_mode.h for implementation details.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Cherry picking:
Bug#25135304: RBR: WRONG FIELD LENGTH IN ERROR MESSAGE
commit 47bd3f7cf3c8518f62b1580ec65af2ba7ac13b95
Description:
============
In row based replication, when replicating from a table with a field with
character set set to UTF8mb3 to the same table with the same field set to
character set UTF8mb4 I get a confusing error message:
For VARCHAR: VARCHAR(1) 'utf8mb3' to VARCHAR(1) 'utf8mb4'
"Column 0 of table 'test.t1' cannot be converted from type 'varchar(3)' to
type 'varchar(1)'"
Similar issue with CHAR type as well.
Issue with respect to BLOB types:
For BLOB: LONGBLOB to TINYBLOB - Error message displays incorrect blob type.
"Column 0 of table 'test.t1' cannot be converted from type 'tinyblob' to type
'tinyblob'"
For BINARY to BINARY - Error message displays incorrect type for master side
field.
"Column 0 of table 'test.t' cannot be converted from type 'char(1)' to type
'binary(10)'"
Similar issue exists for VARBINARY type. It is displayed as 'VARCHAR'.
Analysis:
=========
In Row based replication charset information is not sent as part of metadata
from master to slave.
For VARCHAR field its character length is converted into equivalent
octets/bytes and stored internally. At the time of displaying the data to user
it is converted back to original character length.
For example:
VARCHAR(2)- utf8mb3 is stored as:2*3 = VARCHAR(6)
At the time of displaying it to user
VARCHAR(6)- charset utf8mb3:6/3= VARCHAR(2).
At present the internally converted octect length is sent from master to slave
with out providing the charset information. On slave side if the type
conversion fails 'show_sql_type' function is used to get the type specific
information from metadata. Since there is no charset information is available
the filed type is displayed as VARCHAR(6).
This results in confused error message.
For CHAR fields
CHAR(1)- utf8mb3 - CHAR(3)
CHAR(1)- utf8mb4 - CHAR(4)
'show_sql_type' function which retrieves type information from metadata uses
(bytes/local charset length) to get actual character length. If slave's chaset
is 'utf8mb4' then
CHAR(3/4)-->CHAR(0)
CHAR(4/4)-->CHAR(1).
This results in confused error message.
Analysis for BLOB type issue:
BLOB's length is represented in two forms.
1. Actual length
i.e
(length < 256) type= MYSQL_TYPE_TINY_BLOB;
(length < 65536) type= MYSQL_TYPE_BLOB; ...
2. packlength - The number of bytes used to represent the length of the blob
1- tinyblob
2- blob ...
In row based replication only the packlength is written in the binary log. On
the slave side this packlength is interpreted as actual length of the blob.
Hence the length is always < 256 and the type is displayed as tiny blob.
Analysis for BINARY to BINARY type issue:
The character set information is needed to identify a filed's type as char or
binary. Since master side character set information is not available on the
slave side both binary and char fields are displayed as char.
Fix:
===
For CHAR and VARCHAR fields display their length in octets for both source and
target fields. For target field display the charset information if it is
relevant.
For blob type changed the code to use the packlength and display appropriate
blob type in error message.
For binary and varbinary fields use the slave side character set as reference
to map them to binary or varbinary fields.
After applying MDEV-18863, in some test configurations, SST
may fails due to duplication of some parameters (in particular
"--port") in the main part of the command line and after
"--mysqld-args", as well as due to incorrect interpretation
of the parameter "--port" passed after "--mysqld-args" when
the SST script is invoked without explicitly specifying a port
for SST. In addition, it is necessary to correctly handle spaces,
quotation marks and special characters when copying original
arguments from the argv[] array to a new command line (after
"--mysqld-args"). This patch resolves these shortcomings.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
