1. Now test use fake_relay_log primitive
2. Added RESET SLAVE to include/setup_fake_relay_log.inc for removing relay log info file
3. Added RESET SLAVE to include/cleanup_fake_relay_log.inc
4. Test moved to rpl suite as rpl_binlog_auto_inc_bug33029.test
5. Updated result file
--slave-load-tm
The MDL_SHARED lock was introduced for an object in 5.4, but the 'TABLE_LIST'
object was not initialized with the MDL_SHARED lock when applying event with
LOAD DATA INFILE into table. So the failure is caused when checking the
MDL_SHARED lock for the object.
To fix the problem, the 'TABLE_LIST' object was initialized with the MDL_SHARED
lock when applying event with LOAD DATA INFILE into table.
We found that there are some tests that are not cleaning
up properly:
1. rpl_tmp_table_and_DDL
2. rpl_do_grant
3. rpl_sync
For #1 and #2 we found that the slave would not, for some
cases, replicate all the instructions the master processed
in the cleanup section. We fix these by deploying some
synchronization commands in the test cases so that slave
processes all clean up instructions.
As for #3, this is tracked as part of another bug
(BUG@50442).
fails in PB sporadically)
The IO thread can concurrently access the relay log IO_CACHE
while another thread is performing an FLUSH LOGS procedure.
FLUSH LOGS closes and reopens the relay log and while doing so it
(re)initializes its IO_CACHE. During this procedure the IO_CACHE
mutex is also reinitialized, which can cause problems if some
other thread (namely the IO THREAD) is concurrently accessing it
at the time .
This patch fixes the problem by extending the interface of the
flush_master_info function to also include a second paramater,
"need_relay_log_lock", stating whether the thread should grab the
relay log lock or not before actually flushing the relay log.
Also, IO thread now calls flush_master_info with this flag set
when it flushes master info with in the event read_event loop.
Finally, we also increase loop time in rpl_heartbeat_basic test
case, so that the number of calls to flush logs doubles, stressing
this part of the code a little more.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Linux x86_64 debug
Two test cases fail because the suppression for the unsafe
warning needs to be updated (BUG@39934 refactored this part and
these changes are only in mysql-next-mr - this is why we notice
them now when merging in next-mr). This is the case for
rpl_nondeterministic_functions and rpl_misc_functions test
cases. rpl_stm_binlog_direct test case is not needed in version >
5.1. The rpl_heartbeat_basic test case fails because patch for
BUG@50397 removed the CHANGE MASTER in the slave that would set
it's period to 1/10 of the master. This would cause the test
assertion to fail.
The fixes for the issues described above are:
- rpl_misc_functions - updated suppression message
- rpl_nondeterministic_functions - updated suppression message
- rpl_stm_binlog_direct - removed the test case (it is not
needed in versions > 5.1)
- rpl_heartbeat_basic - deployed instruction:
CHANGE MASTER TO MASTER_HEARTBEAT_PERIOD=0.1;
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
The root cause of the crash is that a TranxNode is freed before it is used.
A TranxNode is allocated and inserted into the active list each time
a log event is written and flushed into the binlog file.
The memory for TranxNode is allocated with thd_alloc and will be freed
at the end of the statement. The after_commit/after_rollback callback
was supposed to be called before the end of each statement and remove the node from
the active list. However this assumption is not correct in all cases(e.g. call
'CREATE TEMPORARY TABLE myisam_t SELECT * FROM innodb_t' in a transaction
and delete all temporary tables automatically when a session closed),
and can cause the memory allocated for TranxNode be freed
before it was removed from the active list. So The TranxNode pointer in the active
list would become a wild pointer and cause the crash.
After this patch, We have a class called a TranxNodeAllocate which manages the memory
for allocating and freeing TranxNode. It uses my_malloc to allocate memory.
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection, during the period the COM_REGISTER_SLAVE failures are
produced in server log file when the slave I/O thread tries to
register on master.
To fix the problem, suppress COM_REGISTER_SLAVE failures in server log
file by mtr suppression, because they are expected.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
Resetting the master before stopping the slave was generating the message
"[ERROR] Slave I/O: Got fatal error 1236 from master when reading data from
binary log: 'could not find next log', Error_code: 1236". In consequence,
the test case was failing because the message had not been suppressed.
To circumvent the failure, we rewrote the test stopping the slave before
resetting the master. We prefer this alternative rather than suppressing
the message.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
enabled binary
The test case injects an error in the server by deleting the
temporary file that it uses during the load data statement
execution. The error consisted of closing, deleting and setting
the file descriptor to -1 right before calling mysql_file_write.
Although, this error injection seems to work OK in Unix like
environments, in Windows, this would cause the server to hit an
assertion in 'my_get_open_flags':
DBUG_ASSERT(fd >= MY_FILE_MIN && fd < (int)my_file_limit)
We fix this by changing the error injection to just call the
macro my_delete_allow_opened, instead of the close + delete + set
fd=-1. The macro deletes the file and is platform
independent. Additionally, this required some changes to how the
assertion is handled in the test case to make it cope with this
change.
