- Build sql files for netware from the mysql_system_tables*.sq files
- Fix comments about mysql_create_system_tables.sh
- Use mysql_install_db.sh to create system tables for mysql_test-run-shell
- Fix mysql-test-run.pl to also look in share/mysql for the msyql_system*.sql files
BitKeeper/deleted/.del-init_db.sql~e2b8d0c8390e8023:
Rename: netware/init_db.sql -> BitKeeper/deleted/.del-init_db.sql~e2b8d0c8390e8023
BitKeeper/deleted/.del-test_db.sql:
Rename: netware/test_db.sql -> BitKeeper/deleted/.del-test_db.sql
BitKeeper/etc/ignore:
Added netware/init_db.sql netware/test_db.sql to the ignore list
mysql-test/install_test_db.sh:
Use mysql_install_db from install_test_db(which is used bu mysql-test-run-shell)
to install the system tables
mysql-test/mysql-test-run.pl:
Look for the mysql_system_tables*.sql also in share/mysql
netware/Makefile.am:
Build netware/init_db.sql and netware/test_db.sql from
the sources in scripts/msyql_system_tables*.sql
scripts/make_binary_distribution.sh:
netware/init_db.sql and netware/test_db.sql are now built by the Makefiles
from the scripts/mysql_system_tables*.sql files
sql/mysql_priv.h:
Update comment remindging to update the MySQL system table definitions
when adding a new SQL_MODE
sql/sql_acl.h:
Update comment reminding to update the MySQL System tables
when changing the ACL defines
BUG#26429: SHOW CREATE EVENT is incorrect for an event that
STARTS NOW()
BUG#26431: Impossible to re-create an event from backup if its
STARTS clause is in the past
WL#3698: Events: execution in local time zone
The problem was that local times specified by the user in AT, STARTS
and ENDS of CREATE EVENT/ALTER EVENT statement were converted to UTC,
and the original time zone was forgotten. This way, event scheduler
couldn't honor Daylight Saving Time shifts, and times shown to the
user were also in UTC. Additionally, CREATE EVENT didn't allow times
in the past, thus preventing straightforward event restoration from
old backups.
This patch reworks event scheduler time computations, performing them
in the time zone associated with the event. Also it allows times to
be in the past.
The patch adds time_zone column to mysql.event table.
NOTE: The patch is almost final, but the bug#9953 should be pushed
first.
client/mysqldump.c:
Before every CREATE EVENT, output its time zone.
mysql-test/include/wait_condition.inc:
Add optional $wait_timeout parameter.
mysql-test/lib/init_db.sql:
Add time_zone column.
mysql-test/r/events.result:
Update result.
mysql-test/r/events_bugs.result:
Update result.
mysql-test/r/events_grant.result:
Update result.
mysql-test/r/events_restart_phase1.result:
Update result.
mysql-test/r/events_scheduling.result:
Update result.
mysql-test/r/mysqldump.result:
Update result.
mysql-test/r/ps.result:
Update result.
mysql-test/r/system_mysql_db.result:
Update result.
mysql-test/t/events.test:
Remove STARTS from the result, as it depends on current time.
mysql-test/t/events_bugs.test:
Time in the past is no longer an error.
mysql-test/t/events_restart_phase1.test:
Fill new column 'time_zone' in mysql.event.
mysql-test/t/events_scheduling.test:
Cleanup: disable event scheduler.
scripts/mysql_create_system_tables.sh:
Add new column 'time_zone' to mysql.event.
scripts/mysql_fix_privilege_tables.sql:
Add new column 'time_zone' to mysql.event.
sql/event_data_objects.cc:
The essence of the change is the following:
- for internal times use my_time_t instead of TIME. Assignment and
comparison is done now on plain numbers.
- in init_execute_at(), init_starts(), init_ends() convert given time
to number of seconds since Epoch (aka Unix time, in UTC).
- handle time_zone field loading and storing.
- in get_next_time(), Unix time is converted back to event time zone,
interval is added, and the result is converted to UTC again.
- fix Event_timed::get_create_event() to report STARTS and ENDS.
- before executing the event body we set thread time zone to the
event time zone.
sql/event_data_objects.h:
Add time_zone member to Event_basic class.
Store internal times in my_time_t (number of seconds since Epoch),
rather than in broken down TIME structure.
sql/event_db_repository.cc:
Add time_zone column handling.
Give a warning and do not create an event if its execution time is in
the past, and ON COMPLETION NOT PRESERVE is set, because such an event
should be dropped by that time. Also, do not allow ALTER EVENT to
set execution time in the past when ON COMPLETION NOT PRESERVE is set.
sql/event_db_repository.h:
Add enum member for new time zone column.
sql/event_queue.cc:
Replace handling of broken down times with simple handling of
my_time_t.
sql/event_queue.h:
Store internal times in my_time_t (number of seconds since Epoch),
rather than in broken down TIME structure.
sql/event_scheduler.cc:
Add TODO comment.
sql/events.cc:
Send time_zone column for SHOW CREATE EVENT.
sql/share/errmsg.txt:
Update error message, and add two more errors.
sql/sql_show.cc:
Add TIME_ZONE column to the output of SHOW EVENTS.
mysql-test/r/events_time_zone.result:
BitKeeper file /home/tomash/src/mysql_ab/mysql-5.1-wl3698/mysql-test/r/events_time_zone.result
mysql-test/t/events_time_zone.test:
BitKeeper file /home/tomash/src/mysql_ab/mysql-5.1-wl3698/mysql-test/t/events_time_zone.test
Problem: to handle a situation when the size of event on the master is greater than max_allowed_packet on slave, we checked for the wrong constant (ER_NET_PACKET_TOO_LARGE instead of CR_NET_PACKET_TOO_LARGE).
Solution: test for the client "packet too large" error code instead of the server one in slave I/O thread.
mysql-test/r/rpl_packet.result:
Added test case for bug #23775 "Replicated event larger that max_allowed_packet infinitely re-transmits"
mysql-test/t/rpl_packet.test:
Added test case for bug #23775 "Replicated event larger that max_allowed_packet infinitely re-transmits"
sql/slave.cc:
Test for the client "packet too large" error code instead of the server one in slave I/O thread.
UPDATE if the row wasn't actually changed.
This bug was caused by fix for bug#19978. It causes AFTER UPDATE triggers
not firing if a row wasn't actually changed by the update part of the
INSERT .. ON DUPLICATE KEY UPDATE.
Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.
sql/sql_insert.cc:
Bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
UPDATE if the row wasn't actually changed.
Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.
mysql-test/r/trigger.result:
Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
UPDATE if the row wasn't actually changed.
mysql-test/t/trigger.test:
Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
UPDATE if the row wasn't actually changed.
- Crash occured because Event engine is only initialized if
ACLs are used but not properly marked as disabled.
- The patch is to mark the Event engine as DISABLED if no ACLs
are used to avoid access of uninitialized variables.
mysql-test/r/skip_grants.result:
Added test case
mysql-test/t/skip_grants.test:
Added test case
into janus.mylan:/usr/home/serg/Abk/mysql-5.1
include/my_global.h:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/ha_partition.cc:
Auto merged
sql/handler.cc:
Auto merged
sql/item_subselect.cc:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/opt_range.cc:
Auto merged
sql/slave.cc:
Auto merged
sql/slave.h:
Auto merged
sql/sp.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_select.h:
Auto merged
sql/sql_servers.cc:
Auto merged
sql/table.cc:
Auto merged
sql/table.h:
Auto merged
sql/tztime.cc:
Auto merged
storage/heap/ha_heap.cc:
Auto merged
storage/innobase/handler/ha_innodb.cc:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisammrg/ha_myisammrg.h:
Auto merged
into magare.gmz:/home/kgeorge/mysql/autopush/B26261-5.0-opt
sql/mysql_priv.h:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
mysql-test/r/insert_update.result:
SCCS merged
mysql-test/t/insert_update.test:
SCCS merged
INSERT uses query_id to verify what fields are
mentioned in the fields list of the INSERT command.
However the check for that is made after the
ON DUPLICATE KEY is processed. This causes all
the fields mentioned in ON DUPLICATE KEY to be
considered as mentioned in the fields list of
INSERT.
Moved the check up, right after processing the
fields list.
mysql-test/r/insert_update.result:
Bug #26261: test case
mysql-test/t/insert_update.test:
Bug #26261: test case
sql/mysql_priv.h:
Bug #26261: moved the check inside mysql_prepare_insert
sql/sql_insert.cc:
Bug #26261: move the check inside mysql_prepare_insert
before setting up the ON DUPLICATE KEY part
sql/sql_prepare.cc:
Bug #26261: moved the check inside mysql_prepare_insert
The crash happens when 'skip-grant-tables' is enabled.
We skip the filling of I_S privilege tables
if acl_cache is not initialized.
mysql-test/r/skip_grants.result:
test result
mysql-test/t/skip_grants.test:
test case
sql/sql_acl.cc:
skip filling of I_S privilege tables
if acl_cache is not initialized
into dev3-240.dev.cn.tlan:/home/justin.he/mysql/mysql-5.1/mysql-5.1-new-ndb-merge
storage/ndb/src/ndbapi/NdbBlob.cpp:
Auto merged
storage/ndb/test/ndbapi/testBlobs.cpp:
Auto merged
touched but not actually changed.
The LAST_INSERT_ID() is reset to 0 if no rows were inserted or changed.
This is the case when an INSERT ... ON DUPLICATE KEY UPDATE updates a row
with the same values as the row contains.
Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.
sql/sql_class.h:
Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.
mysql-test/r/insert_update.result:
Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
mysql-test/t/insert_update.test:
Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
sql/sql_insert.cc:
Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
into mysql.com:/home/hf/work/mrg/mysql-5.1-opt
mysql-test/r/gis-rtree.result:
Auto merged
mysql-test/t/gis-rtree.test:
Auto merged
sql/sql_parse.cc:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
into gbichot3.local:/home/mysql_src/mysql-5.1-runtime-735-realfix
sql/mysql_priv.h:
Auto merged
sql/set_var.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
into mysql.com:/home/ram/work/b24558/b24558.5.1
sql/field_conv.cc:
Auto merged
mysql-test/r/type_newdecimal.result:
merging
mysql-test/t/type_newdecimal.test:
merging
TABLE ... WRITE".
Memory and CPU hogging occured when connection which had to wait for table
lock was serviced by thread which previously serviced connection that was
killed (note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
The problem also occured when one killed particular query in connection
(using KILL QUERY) and later this connection had to wait for some table
lock.
This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.
This patch tries to fix this problem by properly resetting this member.
There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.
sql/mysqld.cc:
We should not forget to reset THD::mysys_var::abort after kill operation
if we are going to use thread to which this operation was applied for
handling of other connections.
sql/sp_head.cc:
We should not forget to reset THD::mysys_var::abort after kill operation
if we are going to use thread to which this operation was applied for
handling of further statements.
sql/sql_parse.cc:
We should not forget to reset THD::mysys_var::abort after kill operation
if we are going to use thread to which this operation was applied for
handling of further statements.
TABLE ... WRITE".
CPU hogging occured when connection which had to wait for table lock was
serviced by thread which previously serviced connection that was killed
(note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
In 5.* versions memory hogging was added to CPU hogging. Moreover in
those versions the problem also occured when one killed particular query
in connection (using KILL QUERY) and later this connection had to wait for
some table lock.
This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.
This patch tries to fix this problem by properly resetting this member.
There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.
sql/mysqld.cc:
We should not forget to reset THD::mysys_var::abort after kill operation
if we are going to use thread to which this operation was applied for
handling of other connections.
Altering to a decimal field we get double value then store it
that may cause data loss.
Fix: use store_decimal() instead.
mysql-test/r/type_newdecimal.result:
Fix for bug #24558: Increasing decimal column length causes data loss
- test result.
mysql-test/t/type_newdecimal.test:
Fix for bug #24558: Increasing decimal column length causes data loss
- test case.
sql/field_conv.cc:
Fix for bug #24558: Increasing decimal column length causes data loss
- if target field's result type is DECIMAL_RESULT
use store_decimal(val_decimal()) in order not to loss data.
into weblab.(none):/home/marcsql/TREE/mysql-5.1-26503-merge
mysql-test/t/sp-error.test:
Auto merged
sql/handler.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_subselect.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sp_head.h:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_show.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
Before this fix, the parser would accept illegal code in SQL exceptions
handlers, that later causes the runtime to crash when executing the code,
due to memory violations in the exception handler stack.
The root cause of the problem is instructions within an exception handler
that jumps to code located outside of the handler. This is illegal according
to the SQL 2003 standard, since labels located outside the handler are not
supposed to be visible (they are "out of scope"), so any instruction that
jumps to these labels, like ITERATE or LEAVE, should not parse.
The section of the standard that is relevant for this is :
SQL:2003 SQL/PSM (ISO/IEC 9075-4:2003)
section 13.1 <compound statement>,
syntax rule 4
<quote>
The scope of the <beginning label> is CS excluding every <SQL schema
statement> contained in CS and excluding every
<local handler declaration list> contained in CS. <beginning label> shall
not be equivalent to any other <beginning label>s within that scope.
</quote>
With this fix, the C++ class sp_pcontext, which represent the "parsing
context" tree (a.k.a symbol table) of a stored procedure, has been changed
as follows:
- constructors have been cleaned up, so that only building a root node for
the tree is public; building nodes inside a tree is not public.
- a new member, m_label_scope, indicates if a given syntactic context
belongs to a DECLARE HANDLER block,
- label resolution, in the method find_label(), has been changed to
implement the restriction of scope regarding labels used in a compound
statement.
The actions in the parser, when parsing the body of a SQL exception handler,
have been changed as follows:
- the implementation of an exception handler (DECLARE HANDLER) now creates
explicitly a new sp_pcontext, to isolate the code inside the handler from
the containing compound statement context.
- registering exception handlers as a result occurs in the parent context,
see the rule sp_hcond_element
- the code in sp_hcond_list has been cleaned up, to avoid code duplication
In addition, the flags IN_SIMPLE_CASE and IN_HANDLER, declared in sp_head.h
have been removed, since they are unused and broken by design (as seen with
Bug 19194 (Right recursion in parser for CASE causes excessive stack usage,
limitation), representing a stack in a single flag is not possible.
Tests in sp-error have been added to show that illegal constructs are now
rejected.
Tests in sp have been added for code coverage, to show that ITERATE or LEAVE
statements are legal when jumping to a label in scope, inside the body of
an exception handler.
mysql-test/r/sp-error.result:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/r/sp.result:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/t/sp-error.test:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/t/sp.test:
SQL Exception handlers define a parsing context for label resolution.
sql/sp_head.cc:
Minor cleanup
sql/sp_head.h:
Minor cleanup
sql/sp_pcontext.cc:
SQL Exception handlers define a parsing context for label resolution.
sql/sp_pcontext.h:
SQL Exception handlers define a parsing context for label resolution.
sql/sql_yacc.yy:
SQL Exception handlers define a parsing context for label resolution.
This bug was intruduced by the fix for bug#17212 (in 4.1). It is not
ok to call test_if_skip_sort_order since this function will
alter the execution plan. By contract it is not ok to call
test_if_skip_sort_order in this context.
This bug appears only in the case when the optimizer has chosen
an index for accessing a particular table but finds a covering
index that enables it to skip ORDER BY. This happens in
test_if_skip_sort_order.
mysql-test/r/key.result:
Bug#24778
test case.
The bug causes the result to be the empty set.
mysql-test/t/key.test:
Bug#24778
The minimal test case that reveals the bug. The reason for such a
complicated schema is that we have to convince the optimizer to
pick one index, then discard it in order to be able to skip
ORDER BY.
sql/sql_select.cc:
bug#24778
Removed the call to test_if_skip_sort_order that constituted the
bug.
It was syntactically correct to define
spatial keys over parts of columns (e.g.
ALTER TABLE t1 ADD x GEOMETRY NOT NULL,
ADD SPATIAL KEY (x(32))).
This may lead to undefined results and/or
interpretation.
Fixed by not allowing partial column
specification in a SPATIAL index definition.
mysql-test/r/alter_table.result:
Bug #26794: 5.1 part
test case
mysql-test/r/gis-rtree.result:
Bug #26794: 5.1 part
updated the tests to the new syntax
mysql-test/t/alter_table.test:
Bug #26794: 5.1 part
test case
mysql-test/t/gis-rtree.test:
Bug #26794: 5.1 part
updated the tests to the new syntax
sql/sql_table.cc:
Bug #26794: 5.1 part
Disable defining SPATIAL KEYS with sub-key parts
Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE.
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.
mysql-test/r/alter_table.result:
Bug #26794: test case
mysql-test/r/gis-rtree.result:
Bug #26794: fixed SHOW CREATE TABLE output.
mysql-test/t/alter_table.test:
Bug #26794: test case
sql/field.cc:
Bug #26794: Allow sub-keys for GEOMETRY
sql/sql_show.cc:
Bug #26794: Don't show sub-key notion
in SHOW CREATE TABLE for SPATIAL indexes.
sql/sql_table.cc:
Bug #26794: Allow sub-keys for GEOMETRY
lock table for writing during prepare of statement.
When single call open_normal_and_derived_tables() was used, we never
set table_count to the right value. This patch reverts the part of
the old code that does open_tables() (and sets table_count), then
checks if table_list->multitable_view is set (and returns if so, using
table_count value), and only then it does mysql_handle_derived().
into mysql.com:/home/svoj/devel/mysql/BUG26881/mysql-5.0-engines
myisam/mi_create.c:
Auto merged
mysql-test/t/merge.test:
Auto merged
sql/ha_myisam.cc:
Auto merged
sql/sql_parse.cc:
Use local.
mysql-test/r/merge.result:
SCCS merged
differences in tables
Certain merge tables were wrongly reported as having incorrect definition:
- Some fields that are 1 byte long (e.g. TINYINT, CHAR(1)), might
be internally casted (in certain cases) to a different type on a
storage engine layer. (affects 4.1 and up)
- If tables in a merge (and a MERGE table itself) had short VARCHAR column (less
than 4 bytes) and at least one (but not all) tables were ALTER'ed (even to an
identical table: ALTER TABLE xxx ENGINE=yyy), table definitions went ouf of
sync. (affects 4.1 only)
This is fixed by relaxing a check for underlying conformance and setting
field type to FIELD_TYPE_STRING in case varchar is shorter than 4
when a table is created.
myisam/mi_create.c:
Added a comment.
mysql-test/r/merge.result:
A test case for bug#26881.
mysql-test/t/merge.test:
A test case for bug#26881.
sql/ha_myisam.cc:
Relaxed some checks performed by check_definition():
As comparing of fulltext keys (and key segments) is not yet implemented,
only return an error in case one of keys is fulltext and other is not.
Otherwise, if both keys are fulltext, accept them as is.
As comparing of spatial keys (and key segments) is not yet implemented,
only return an error in case one of keys is spatial and other is not.
Otherwise, if both keys are spatial, accept them as is.
A workaround to handle situation when field is casted from FIELD_SKIP_ZERO
to FIELD_NORMAL. This could happen only in case field length is 1 and row
format is fixed.
sql/sql_parse.cc:
When a table that has varchar field shorter than 4 is created, field type is
set to FIELD_TYPE_VAR_STRING. Later, when a table is modified using alter
table, field type is changed to FIELD_TYPE_STRING (see Field_string::type).
That means HA_OPTION_PACK_RECORD flag might be lost and thus null_bit might
be shifted by alter table, in other words alter table doesn't create 100%
equal table definition.
This is usually not a problem, since when a table is created/altered,
definition on a storage engine layer is based on one that is passed from
sql layer. But it is a problem for merge engine - null_bit is shifted when
a table (merge or underlying) is altered.
Set field type to FIELD_TYPE_STRING in case FIELD_TYPE_VAR_STRING is shorter
than 4 when a table is created as it is done in Field::type.
