InnoDB never supported more than one copy of a redo log.
There were provisions to do that. For Mariabackup, let us clean up
this code.
log_sys_init(): Renamed from log_init().
log_set_capacity(): Renamed from log_calc_max_ages().
log_init(): Renamed from log_group_init(). Remove the parameters
id, space_id. Let the caller invoke log_set_capacity() when needed.
log_group_t: Remove id, space_id, log_groups.
log_t: Replace log_groups with a single log.
recv_find_max_checkpoint(): Declare globally. Remove the first parameter.
xtrabackup_choose_lsn_offset(): Remove (dead code).
Problem was that FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION field that for
encrypted pages even in system datafiles should contain key_version
except very first page (0:0) is after encryption overwritten with
flush lsn.
Ported WL#7990 Repurpose FIL_PAGE_FLUSH_LSN to 10.1
The field FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION is consulted during
InnoDB startup.
At startup, InnoDB reads the FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
from the first page of each file in the InnoDB system tablespace.
If there are multiple files, the minimum and maximum LSN can differ.
These numbers are passed to InnoDB startup.
Having the number in other files than the first file of the InnoDB
system tablespace is not providing much additional value. It is
conflicting with other use of the field, such as on InnoDB R-tree
index pages and encryption key_version.
This worklog will stop writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION to
other files than the first file of the InnoDB system tablespace
(page number 0:0) when system tablespace is encrypted. If tablespace
is not encrypted we continue writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
to all first pages of system tablespace to avoid unnecessary
warnings on downgrade.
open_or_create_data_files(): pass only one flushed_lsn parameter
xb_load_tablespaces(): pass only one flushed_lsn parameter.
buf_page_create(): Improve comment about where
FIL_PAGE_FIL_FLUSH_LSN_OR_KEY_VERSION is set.
fil_write_flushed_lsn(): A new function, merged from
fil_write_lsn_and_arch_no_to_file() and
fil_write_flushed_lsn_to_data_files().
Only write to the first page of the system tablespace (page 0:0)
if tablespace is encrypted, or write all first pages of system
tablespace and invoke fil_flush_file_spaces(FIL_TYPE_TABLESPACE)
afterwards.
fil_read_first_page(): read flush_lsn and crypt_data only from
first datafile.
fil_open_single_table_tablespace(): Remove output of LSN, because it
was only valid for the system tablespace and the undo tablespaces, not
user tablespaces.
fil_validate_single_table_tablespace(): Remove output of LSN.
checkpoint_now_set(): Use fil_write_flushed_lsn and output
a error if operation fails.
Remove lsn variable from fsp_open_info.
recv_recovery_from_checkpoint_start(): Remove unnecessary second
flush_lsn parameter.
log_empty_and_mark_files_at_shutdown(): Use fil_writte_flushed_lsn
and output error if it fails.
open_or_create_data_files(): Pass only one flushed_lsn variable.
due to different packaging issues.
Also, Percona thinks that tar support has many limitations
and should be removed as well( see discussion in
https://bugs.launchpad.net/percona-xtrabackup/+bug/1681721)
there is an alternative streaming format xbstream that is supported and
does not have these limitations.
Significantly reduce the amount of InnoDB, XtraDB and Mariabackup
code changes by defining pfs_os_file_t as something that is
transparently compatible with os_file_t.
Throttling only works with when creating backup. Attempt to use it with
--copy-back results in crash, since throttle events are not initialized.
Thus, ignore throttling unless --backup is given.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
Initial support
tested against OpenSSL 1.0.1, 1.0.2, 1.1.0, Yassl and LibreSSL
not working on Windows with native SChannel support, due to wrong cipher
mapping: Latter one requires push of CONC-241 fixes.
Please note that OpenSSL 0.9.8 and OpenSSL 1.1.0 will not work: Even if
the build succeeds, test cases will fail with various errors, especially
when using different tls libraries or versions for client and server.
Also, include fixes by Vladislav Vaintroub to the
aws_key_management plugin. The AWS C++ SDK specifically depends on
OPENSSL_LIBRARIES, not generic SSL_LIBRARIES (such as YaSSL).
innochecksum uses global variables. great, let's use them all the
way down, instead of passing them as arguments to innodb internals,
conditionally modifying function prototypes with #ifdefs
/home/travis/build/MariaDB/server/extra/mysqld_safe_helper.c:62:21: warning: too many arguments in call to 'do_usage'
do_usage(argv[0]);
~~~~~~~~ ^
1 warning generated.
Problem was that bpage was referenced after it was already freed
from LRU. Fixed by adding a new variable encrypted that is
passed down to buf_page_check_corrupt() and used in
buf_page_get_gen() to stop processing page read.
This patch should also address following test failures and
bugs:
MDEV-12419: IMPORT should not look up tablespace in
PageConverter::validate(). This is now removed.
MDEV-10099: encryption.innodb_onlinealter_encryption fails
sporadically in buildbot
MDEV-11420: encryption.innodb_encryption-page-compression
failed in buildbot
MDEV-11222: encryption.encrypt_and_grep failed in buildbot on P8
Removed dict_table_t::is_encrypted and dict_table_t::ibd_file_missing
and replaced these with dict_table_t::file_unreadable. Table
ibd file is missing if fil_get_space(space_id) returns NULL
and encrypted if not. Removed dict_table_t::is_corrupted field.
Ported FilSpace class from 10.2 and using that on buf_page_check_corrupt(),
buf_page_decrypt_after_read(), buf_page_encrypt_before_write(),
buf_dblwr_process(), buf_read_page(), dict_stats_save_defrag_stats().
Added test cases when enrypted page could be read while doing
redo log crash recovery. Also added test case for row compressed
blobs.
btr_cur_open_at_index_side_func(),
btr_cur_open_at_rnd_pos_func(): Avoid referencing block that is
NULL.
buf_page_get_zip(): Issue error if page read fails.
buf_page_get_gen(): Use dberr_t for error detection and
do not reference bpage after we hare freed it.
buf_mark_space_corrupt(): remove bpage from LRU also when
it is encrypted.
buf_page_check_corrupt(): @return DB_SUCCESS if page has
been read and is not corrupted,
DB_PAGE_CORRUPTED if page based on checksum check is corrupted,
DB_DECRYPTION_FAILED if page post encryption checksum matches but
after decryption normal page checksum does not match. In read
case only DB_SUCCESS is possible.
buf_page_io_complete(): use dberr_t for error handling.
buf_flush_write_block_low(),
buf_read_ahead_random(),
buf_read_page_async(),
buf_read_ahead_linear(),
buf_read_ibuf_merge_pages(),
buf_read_recv_pages(),
fil_aio_wait():
Issue error if page read fails.
btr_pcur_move_to_next_page(): Do not reference page if it is
NULL.
Introduced dict_table_t::is_readable() and dict_index_t::is_readable()
that will return true if tablespace exists and pages read from
tablespace are not corrupted or page decryption failed.
Removed buf_page_t::key_version. After page decryption the
key version is not removed from page frame. For unencrypted
pages, old key_version is removed at buf_page_encrypt_before_write()
dict_stats_update_transient_for_index(),
dict_stats_update_transient()
Do not continue if table decryption failed or table
is corrupted.
dict0stats.cc: Introduced a dict_stats_report_error function
to avoid code duplication.
fil_parse_write_crypt_data():
Check that key read from redo log entry is found from
encryption plugin and if it is not, refuse to start.
PageConverter::validate(): Removed access to fil_space_t as
tablespace is not available during import.
Fixed error code on innodb.innodb test.
Merged test cased innodb-bad-key-change5 and innodb-bad-key-shutdown
to innodb-bad-key-change2. Removed innodb-bad-key-change5 test.
Decreased unnecessary complexity on some long lasting tests.
Removed fil_inc_pending_ops(), fil_decr_pending_ops(),
fil_get_first_space(), fil_get_next_space(),
fil_get_first_space_safe(), fil_get_next_space_safe()
functions.
fil_space_verify_crypt_checksum(): Fixed bug found using ASAN
where FIL_PAGE_END_LSN_OLD_CHECKSUM field was incorrectly
accessed from row compressed tables. Fixed out of page frame
bug for row compressed tables in
fil_space_verify_crypt_checksum() found using ASAN. Incorrect
function was called for compressed table.
Added new tests for discard, rename table and drop (we should allow them
even when page decryption fails). Alter table rename is not allowed.
Added test for restart with innodb-force-recovery=1 when page read on
redo-recovery cant be decrypted. Added test for corrupted table where
both page data and FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION is corrupted.
Adjusted the test case innodb_bug14147491 so that it does not anymore
expect crash. Instead table is just mostly not usable.
fil0fil.h: fil_space_acquire_low is not visible function
and fil_space_acquire and fil_space_acquire_silent are
inline functions. FilSpace class uses fil_space_acquire_low
directly.
recv_apply_hashed_log_recs() does not return anything.
This is a reduced version of an originally much larger patch.
We will keep the definition of the ulint, lint data types unchanged,
and we will not be replacing fprintf() calls with ib_logf().
On Windows, use the standard format strings instead of nonstandard
extensions.
This patch fixes some errors in format strings.
Most notably, an IMPORT TABLESPACE error message in InnoDB was
displaying the number of columns instead of the mismatching flags.
Also, remove empty .ic files that were not removed by my MySQL commit.
Problem:
InnoDB used to support a compilation mode that allowed to choose
whether the function definitions in .ic files are to be inlined or not.
This stopped making sense when InnoDB moved to C++ in MySQL 5.6
(and ha_innodb.cc started to #include .ic files), and more so in
MySQL 5.7 when inline methods and functions were introduced
in .h files.
Solution:
Remove all references to UNIV_NONINL and UNIV_MUST_NOT_INLINE from
all files, assuming that the symbols are never defined.
Remove the files fut0fut.cc and ut0byte.cc which only mattered when
UNIV_NONINL was defined.
Define my_thread_id as an unsigned type, to avoid mismatch with
ulonglong. Change some parameters to this type.
Use size_t in a few more places.
Declare many flag constants as unsigned to avoid sign mismatch
when shifting bits or applying the unary ~ operator.
When applying the unary ~ operator to enum constants, explictly
cast the result to an unsigned type, because enum constants can
be treated as signed.
In InnoDB, change the source code line number parameters from
ulint to unsigned type. Also, make some InnoDB functions return
a narrower type (unsigned or uint32_t instead of ulint;
bool instead of ibool).
- Removed not used variables
- Added __attribute__()
- Added static to some local functions
(gcc 5.4 gives a warning for external functions without an external definition)
10.1 is merged into 10.2 now. Two issues are left to fix:
(1) encryption.innochecksum test
(2) read_page0 vs page_0_crypt_read
(1) innochecksum tool did not compile after merge because
buf_page_is_corrupted uses fil_crypt_t that has been changed.
extra/CMakeLists.txt: Added fil/fil0crypt.cc as dependency
as we need to use fil_crypt_verify_checksum for encrypted pages.
innochecksum.cc: If we think page is encrypted i.e.
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION != 0 we call
fil_crypt_verify_checksum() function to compare calculated
checksum to stored checksum calculated after encryption
(this is stored on different offset i.e.
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION + 4).
If checksum does not match we call normal buf_page_is_corrupted
to compare calculated checksum to stored checksum.
fil0crypt.cc: add #ifdef UNIV_INNOCHECKSUM to be able to compile
this file for innochecksum tool.
(2) read_page0 is not needed and thus removed.
