temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
bytes_received/bytes_sent are ulonglong so they cannot be handled by the
ulong handling code in add_to_status/add_diff_to_status().
Fixed by adding code to handle these two variables in
add_to_status()/add_diff_to_status() and making sure they are not a subject
to the ulong handling code.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
an atomic counter"
Split the large LOCK_open section in open_table().
Do not call open_table_from_share() under LOCK_open.
Remove thd->version.
This fixes
Bug#50589 "Server hang on a query evaluated using a temporary
table"
Bug#51557 "LOCK_open and kernel_mutex are not happy together"
Bug#49463 "LOCK_table and innodb are not nice when handler
instances are created".
This patch has effect on storage engines that rely on
ha_open() PSEA method being called under LOCK_open.
In particular:
1) NDB is broken and left unfixed. NDB relies on LOCK_open
being kept as part of ha_open(), since it uses auto-discovery.
While previously the NDB open code was race-prone, now
it simply fails on asserts.
2) HEAP engine had a race in ha_heap::open() when
a share for the same table could be added twice
to the list of shares, or a dangling reference to a share
stored in HEAP handler. This patch aims to address this
problem by 'pinning' the newly created share in the
internal HEAP engine share list until at least one
handler instance is created using that share.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
Fix various mismatches between function's language linkage. Any
particular function that is declared in C++ but should be callable
from C must have C linkage. Note that function types with different
linkages are also distinct. Thus, if a function type is declared in
C code, it will have C linkage (same if declared in a extern "C"
block).
errors
In the fix of BUG#39934 in 5.1-rep+3, errors are generated when
binlog_format=row and a statement modifies a table restricted to
statement-logging (ER_BINLOG_ROW_MODE_AND_STMT_ENGINE); or if
binlog_format=statement and a statement modifies a table restricted to
row-logging (ER_BINLOG_STMT_MODE_AND_ROW_ENGINE).
However, some DDL statements that lock tables (e.g. ALTER TABLE,
CREATE INDEX and CREATE TRIGGER) were causing spurious errors,
although no row might be inserted into the binary log.
To fix the problem, we tagged statements that may generate
rows into the binary log and thence the warning messages are
only printed out when the appropriate conditions hold and rows
might be changed.
The thd->variables.option_bits & OPTION_BIN_LOG is currently abused:
it's both a system variable and an implementation switch. The current
approach to this option bit breaks the session variable encapsulation.
Besides it is allowed to change @@session.sql_bin_log within a
transaction what may lead to not correctly logging a transaction.
To fix the problems, we created a thd->variables variable to represent
the "sql_log_bin" and prohibited its update inside a transaction or
sub-statement.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
MYSQL_BIN_LOG m_table_map_version member and it's associated
functions were not used in the logic of binlogging and replication,
this patch removed all related code.
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
truncates text/blob to 766 chars
mysqldump and SELECT ... INTO OUTFILE truncated long BLOB/TEXT
values to size of 766 bytes (MAX_FIELD_WIDTH or 255 * 3 + 1).
The select_export::send_data method has been modified to
reallocate a conversion buffer for long field data.
Iterative patch improvement. Previously committed patch
caused wrong result on Windows. The previous patch also
broke secure_file_priv for symlinks since not all file
paths which must be compared against this variable are
normalized using the same norm.
The server variable opt_secure_file_priv wasn't
normalized properly and caused the operations
LOAD DATA INFILE .. INTO TABLE ..
and
SELECT load_file(..)
to do different interpretations of the
--secure-file-priv option.
The patch moves code to the server initialization
routines so that the path always is normalized
once and only once.
It was also intended that setting the option
to an empty string should be equal to
lifting all previously set restrictions. This
is also fixed by this patch.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
