Add CRC32C code to mysys. The x86-64 implementation uses PCMULQDQ in addition to CRC32 instruction
after Intel whitepaper, and is ported from rocksdb code.
Optimized ARM and POWER CRC32 were already present in mysys.
Existing implementation used my_checksum (from mysys)
for calculating table checksum and binlog checksum.
This implementation was optimized for powerpc only and lacked
SIMD implementation for x86 (using clmul) and ARM
(using ACLE) instead used zlib-crc32.
mariabackup had its own copy of the crc32 implementation
using hardware optimized implementation only for x86 and lagged
hardware based implementation for powerpc and ARM.
Patch helps unifies all such calls and help aggregate all of them
using an unified interface my_checksum().
Said unification also enables hardware optimized calls for all
architecture viz. x86, ARM, POWERPC.
Default always fallback to zlib crc32.
Thanks to Daniel Black for reviewing, fixing and testing
PowerPC changes. Thanks to Marko and Daniel for early code feedback.
- Do not scan registry to check if TCPIP is supported.
- Do not read registry under HKEY_LOCAL_MACHINE\SOFTWARE\MySQL anymore.
- Do not load threadpool function dynamically, it is available
since Win7.
- simplify win32_init_tcp_ip(), and return error of WSAStartup() fails.
- Correct comment in my_parameter_handler()
don't rely on imprecise my_file_opened | my_stream_opened,
scan the array for open handles instead.
also, remove my_print_open_files() and embed it in my_end()
to have one array scan instead of two.
To use:
- Compile with -DUSE_MY_LIKELY
- Change (with replace) all likely/unlikely to my_likely/my_/unlikely
replace likely my_likely unlikely my_unlikely -- *c *h
- Start mysqld with -T
- run some test
- When mysqld has shut down cleanely, report will be on stderr
- Fix win64 pointer truncation warnings
(usually coming from misusing 0x%lx and long cast in DBUG)
- Also fix printf-format warnings
Make the above mentioned warnings fatal.
- fix pthread_join on Windows to set return value.
If compiling a non DBUG binary with
-DDBUG_ASSERT_AS_PRINTF asserts will be
changed to printf + stack trace (of stack
trace are enabled).
- Changed #ifndef DBUG_OFF to
#ifdef DBUG_ASSERT_EXISTS
for those DBUG_OFF that was just used to enable
assert
- Assert checking that could greatly impact
performance where changed to DBUG_ASSERT_SLOW which
is not affected by DBUG_ASSERT_AS_PRINTF
- Added one extra option to my_print_stacktrace() to
get more silent in case of stack trace printing as
part of assert.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
my_thread_global_init() + my_thrad_global_end() repeatadily.
This caused THR_KEY_mysys to be allocated multiple times.
Deletion of THR_KEY_mysys was originally in my_thread_global_end() but was
moved to my_end() as DBUG uses THR_KEY_mysys and DBUG is released after
my_thread_global_end() is called.
Releasing DBUG before my_thread_global_end() and move THR_KEY_mysys back
into my_thread_global_end() could be a solution, but as safe_mutex and other
things called by my_thread_global_end is using DBUG it may not be completely
safe.
To solve this, I used the simple solution to add a marker that THR_KEY_mysys
is created and not re-create it in my_thread_global_init if it already
exists.
Added MAX_STATEMENT_TIME user variable to automaticly kill queries after a given time limit has expired.
- Added timer functions based on pthread_cond_timedwait
- Added kill_handlerton() to signal storage engines about kill/timeout
- Added support for GRANT ... MAX_STATEMENT_TIME=#
- Copy max_statement_time to current user, if stored in mysql.user
- Added status variable max_statement_time_exceeded
- Added KILL_TIMEOUT
- Removed digest hash from performance schema tests as they change all the time.
- Updated test results that changed because of the new user variables or new fields in mysql.user
This functionallity is inspired by work done by Davi Arnaut at twitter.
Test case is copied from Davi's work.
Documentation can be found at
https://kb.askmonty.org/en/how-to-limittimeout-queries/
mysql-test/r/mysqld--help.result:
Updated for new help message
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/sys_vars/r/max_statement_time_basic.result:
Added testing of max_statement_time
mysql-test/suite/sys_vars/t/max_statement_time_basic.test:
Added testing of max_statement_time
mysql-test/t/max_statement_time.test:
Added testing of max_statement_time
mysys/CMakeLists.txt:
Added thr_timer
mysys/my_init.c:
mysys/mysys_priv.h:
Added new mutex and condition variables
Added new mutex and condition variables
mysys/thr_timer.c:
Added timer functions based on pthread_cond_timedwait()
This can be compiled with HAVE_TIMER_CREATE to benchmark agains timer_create()/timer_settime()
sql/lex.h:
Added MAX_STATEMENT_TIME
sql/log_event.cc:
Safety fix (timeout should be threated as an interrupted query)
sql/mysqld.cc:
Added support for timers
Added status variable max_statement_time_exceeded
sql/share/errmsg-utf8.txt:
Added ER_QUERY_TIMEOUT
sql/signal_handler.cc:
Added support for KILL_TIMEOUT
sql/sql_acl.cc:
Added support for GRANT ... MAX_STATEMENT_TIME=#
Copy max_statement_time to current user
sql/sql_class.cc:
Added timer functionality to THD.
Added thd_kill_timeout()
sql/sql_class.h:
Added timer functionality to THD.
Added KILL_TIMEOUT
Added max_statement_time variable in similar manner as long_query_time was done.
sql/sql_connect.cc:
Added handling of max_statement_time_exceeded
sql/sql_parse.cc:
Added starting and stopping timers for queries.
sql/sql_show.cc:
Added max_statement_time_exceeded for user/connects status in MariaDB 10.0
sql/sql_yacc.yy:
Added support for GRANT ... MAX_STATEMENT_TIME=# syntax, to be enabled in 10.0
sql/structs.h:
Added max_statement_time user resource
sql/sys_vars.cc:
Added max_statement_time variables
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.test
Removed test as we require all fields in mysql.user table.
scripts/mysql_system_tables.sql
scripts/mysql_system_tables_data.sql
scripts/mysql_system_tables_fix.sql
Updated mysql.user with new max_statement_time field
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
Fixed memory leak printing when doing 'mysqld --version', 'mysqld --debug --help' and 'mysqld --debug --help --verbose'
mysys/my_init.c:
Moved checking if we should call DBUG_END() before my_thread_end() as otherwise we will not free DBUG variables and files.
mysys/thr_lock.c:
Fixed compiler warning
sql/mysqld.cc:
Fixed memory leaks when using mysqld --help and mysqld --version
Added --debug as an option that works for all builds. For non debug builds we now get a warning.
strings/dtoa.c:
Fixed valgrind warning (c could contain data outside of the given string)
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
The idea is that my_global_flags is ored to the MyFlags parameter for the above functions if the MY_WME flag is not set.
As the my_global_flags has ME_JUST_INFO (mark error as 'note') and possible ME_NOREFRESH (write error to log) this will force mysqld to log the not critical error to the log as a note.
include/my_sys.h:
Moved MY_SYNC_DIR to ensure it never clashes with ME_JUST_INFO
Added my_global_flags
mysql-test/Makefile.am:
Removed not used bugs directory
mysys/my_init.c:
Added my_global_flags, a variable that is ored to MyFlags in a those mysys functions we want extra logging.
mysys/my_malloc.c:
Added support for my_global_flags
mysys/my_open.c:
Added support for my_global_flags
mysys/my_pread.c:
Added support for my_global_flags
mysys/my_read.c:
Added support for my_global_flags
mysys/my_static.c:
Added my_global_flags
mysys/my_write.c:
Added support for my_global_flags
sql/mysqld.cc:
Set my_global_flags for warning levels 10 & 11
sql/sql_base.cc:
Don't increment unhandled errors for notes or warnings.
FUNCTION 'PTHREAD_INIT'
The problem was that compilation would fail with a warning:
Implicit declaration of function 'pthread_init' if MySQL was
compiled on OS X 10.7 (Lion). The reason was that pthread_init()
is now part of an internal OS X pthread library so it was found
by CMake.
This patch fixes the problem by removing HAVE_PTHREAD_INIT and
related code. pthread_init() was specific to MIT-pthreads which
has not been supported since 4.1 and was therefore no longer
relevant.
No test case added.
client/mysql_upgrade.c:
missing DBUG_RETURN
client/mysqladmin.cc:
client plugin memory wasn't freed
client/mysqlcheck.c:
client plugin memory, defaults, a result set, a command-line option value were not freed.
missing DBUG_RETURN.
client/mysqldump.c:
client plugin memory wasn't freed
client/mysqlslap.c:
client plugin memory wasn't freed
client/mysqltest.cc:
hopeless. cannot be fixed.
mysql-test/valgrind.supp:
Bug#56666 is now fixed.
mysys/array.c:
really, don't allocate if the caller didn't ask to.
mysys/my_init.c:
safemalloc checks must be done at the very end
mysys/my_thr_init.c:
not needed anymore
sql-common/client.c:
memory leak
sql/log.cc:
log_file was not closed, memory leak.
sql/mysqld.cc:
fix bug#56666 (causing many P_S related memory leaks).
close_active_mi() not called for --bootstrap, memory leak.
sql/sql_lex.cc:
redo Lex->mi handling
sql/sql_lex.h:
redo Lex->mi handling
sql/sql_plugin.cc:
plugins having PLUGIN_VAR_MEMALLOC string variables have this variables allocated in every THD.
The memory was freed in ~THD but only if plugin was still active. If plugin was unloaded the
variable was not found and the memory was lost. By loading and unloading plugins an arbitrary
amount of memory can be lost.
sql/sql_repl.cc:
redo Lex->mi handling
sql/sql_yacc.yy:
completely wrong handling of Lex->mi - run-time memory leak, by repeating the statement
arbitrary amount of memory can be lost.
Lex->mi.repl_ignore_server_ids_opt was allocated when parsing CHANGE MASTER,
and freed after executing the statement. if parser failed on syntax (or another)
error the statement was never executed. Lex->mi was simply bzero-ed for the next
CHANGE MASTER statement.
sql/table.cc:
didn't compile
storage/perfschema/pfs_lock.h:
Bug#56666 is fixed
