In order to handle CHAR() fields, 8 bits were reserved for
the size of the CHAR field. However, instead of denoting the
number of characters in the field, field_length was used which
denotes the number of bytes in the field.
Since UTF-8 fields can have three bytes per character (and
has been extended to have four bytes per character in 6.0),
an extra two bits have been encoded in the field metadata
work for fields of type Field_string (i.e., CHAR fields).
Since the metadata word is filled, the extra bits have been
encoded in the upper 4 bits of the real type (the most
significant byte of the metadata word) by computing the
bitwise xor of the extra two bits. Since the upper 4 bits
of the real type always is 1111 for Field_string, this
means that for fields of length <256, the encoding is
identical to the encoding used in pre-5.1.26 servers, but
for lengths of 256 or more, an unrecognized type is formed,
causing an old slave (that does not handle lengths of 256
or more) to stop.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding test cases for replicating UTF-8 fields of lengths
of 256 or more (bytes).
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Result file change.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Adding tests to trigger check that an error is generated when replicating from a
5.1.25 server for tables with a CHAR(128) but not when replicating a table with a
CHAR(63). Although the bug indicates that the limit is 83, we elected to use CHAR(63)
since 6.0 uses 4-byte UTF-8, and anything exceeding 63 would then cause the test to fail
when the patch is merged to 6.0.
mysql-test/suite/bugs/combinations:
Adding combinations file to run all bug reports in all binlog modes (where
applicable).
mysql-test/suite/bugs/r/rpl_bug37426.result:
Result file change.
mysql-test/suite/bugs/t/rpl_bug37426.test:
Added test for reported bug.
mysql-test/suite/rpl/r/rpl_row_basic_2myisam.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_basic_3innodb.result:
Result file change.
sql/field.cc:
Encoding an extra two bits in the most significant nibble (4 bits)
of the metadata word. Adding assertions to ensure that no attempt
is made to use lengths longer than supported.
Extending compatible_field_size() function with an extra parameter
holding a Relay_log_instace for error reporting.
Field_string::compatible_field_size() now reports an error if field
size for a CHAR is >255.
sql/field.h:
Field length is now computed from most significant 4 bits
of metadata word, or is equal to the row pack length if
there is no metadata.
Extending compatible_field_size() function with an extra parameter
holding a Relay_log_instace for error reporting.
sql/rpl_utility.cc:
Adding relay log parameter to compatible_field_size().
Minor refactoring to eliminate duplicate code.
sql/slave.cc:
Extending rpl_master_has_bug() with a single-argument predicate function and
a parameter to the predicate function. The predicate function can be used to
test for extra conditions for the bug before writing an error message.
sql/slave.h:
Extending rpl_master_has_bug() with a single-argument predicate function and
a parameter to the predicate function. The predicate function can be used to
test for extra conditions for the bug before writing an error message.
Also removing gratuitous default argument.
sql/sql_insert.cc:
Changing calls to rpl_master_has_bug() to adapt to changed signature.
into magare.gmz:/home/kgeorge/mysql/work/merge-build-5.1-bugteam
sql/log.cc:
Auto merged
sql/slave.cc:
Auto merged
sql/share/errmsg.txt:
merged 5.1-main to 5.1-bugteam
If a binlog file is manually replaced with a namesake directory the internal purging did
not handle the error of deleting the file so that eventually
a post-execution guards fires an assert.
Fixed with reusing a snippet of code for bug@18199 to tolerate lack of the file but no other error
at an attempt to delete it.
The same applied to the index file deletion.
The cset carries pieces of manual merging.
mysql-test/r/binlog_index.result:
new results
mysql-test/r/ctype_big5.result:
results changed
mysql-test/suite/binlog/r/binlog_auto_increment_bug33029.result:
new results
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
new results
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
cleanup. still todo: to let the test run multiple times w/o restarting the server (just ./mtr test)
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
results changed
mysql-test/suite/rpl/t/rpl_stm_auto_increment_bug33029.test:
guarding the test with statement format condition as the logics of the test requires
sql/log.cc:
two changes. One for the bug, other manual merge.
The bug change needs MYF(0) to pass to my_delete because not all error out of the function
are critical. The finer check is done on the caller of my_delete similarly how it was implemented
for bug@18199 fixes. Non-existance of a file is not a critical error.
sql/sql_class.cc:
manual merge, removing extra automatically brought hunk.
into mysql1000.(none):/home/andrei/MySQL/MERGE/5.1-main2rpl
client/mysqltest.c:
Auto merged
mysql-test/t/disabled.def:
Auto merged
sql/slave.cc:
Auto merged
sql/slave.h:
Auto merged
sql/sql_class.cc:
Auto merged
refining a test for embedded env.
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
test must ensure there is binlog capability on the server
into mats-laptop.(none):/home/bk/b29020-mysql-5.1-rpl
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Auto merged
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Auto merged
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/log_event.h:
Auto merged
sql/sql_insert.cc:
Auto merged
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
mysql-test/extra/rpl_tests/rpl_row_delayed_ins.test:
Removing SHOW BINLOG EVENTS causing test to be non-deterministic.
mysql-test/r/ctype_cp932_binlog_row.result:
Result change.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Result change.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_ctype_ucs.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_insert_select.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result file change.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Result file change.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Removing table that will be used in test to prevent failing if preceeding
tests forgot to drop the table.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_basic_11bugs.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_delayed_ins.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_inexist_tbl.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_log.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_until.result:
Result file change.
mysql-test/suite/rpl/r/rpl_slave_skip.result:
Result file change.
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
Result file change.
mysql-test/suite/rpl/r/rpl_truncate_2myisam.result:
Result file change.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_row_mysqlbinlog.test:
Binlog position change. Added stop position to mysqlbinlog argments to prevent
extreneous output.
mysql-test/suite/rpl/t/rpl_row_until.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
Removing extreneous SHOW BINLOG EVENTS causing test to be non-deterministic.
mysql-test/suite/rpl_ndb/r/rpl_ndb_log.result:
Result change.
sql/log.cc:
Adding variable at_least_one_stmt to denote that there is at least one
statement committed to the transaction cache (but there might be more).
Removing duplicate checks from binlog_end_trans(). The transaction cache
should always be committed or rolled back when this function is called.
Correcting conditions for binlog_rollback() and binlog_commit() and removing
the previous "invisible commit" in favor of always using explicit commits
in the binary log.
sql/log_event.cc:
Marking table map event to be cached. Removing Muted_query_log_event from code.
sql/log_event.h:
Removing unused class Muted_query_log_event.
sql/sql_insert.cc:
Adding missing call to ha_autocommit_or_rollback() for delayed thread. Marking
CREATE-SELECT statements as transactional, since they don't need to be logged.
mysql-test/suite/binlog/r/binlog_auto_increment_bug33029.result:
clean up objects used by test
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
clean up objects used by test
into mail.hezx.com:/media/sda3/work/mysql/bkwork/b33029_5.0_to_5.1_fails_on_dup_key/5.1
sql/slave.cc:
Auto merged
sql/slave.h:
Auto merged
sql/sql_class.cc:
Auto merged
sql/sql_class.h:
Auto merged
into stella.local:/home2/mydev/mysql-5.1-axmrg
mysql-test/r/federated.result:
Auto merged
mysql-test/t/federated.test:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_update.cc:
Auto merged
storage/federated/ha_federated.cc:
Auto merged
mysql-test/suite/binlog/r/binlog_unsafe.result:
Manual merge
mysql-test/suite/binlog/t/binlog_unsafe.test:
Manual merge
if binlog_format=mixed
Addition to fix for BUG#34768: fixed test case failures discovered
by pushbuild.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Fixed binlog_stm_ps failure when binlog format is statement:
- this test case makes sence only if binlog format is statement,
thus execute it only in this mode;
- added a warning that insert ... select ... limit is not safe
to execute in statement mode.
mysql-test/suite/binlog/t/binlog_stm_ps.test:
Fixed binlog_stm_ps failure when binlog format is statement:
- this test case makes sence only if binlog format is statement,
thus execute it only in this mode;
- added a warning that insert ... select ... limit is not safe
to execute in statement mode.
mysql-test/suite/rpl/t/rpl_optimize.test:
rpl_optimize test may be executed in various binlog format modes.
In statement mode delete ... limit issues a warning, in mixed and
row modes it does not.
Fixed a test case so it is still possible to execute it in all binlog
format modes by ignoring delete ... limit warnings.
mysql-test/suite/rpl/t/rpl_user_variables.test:
rpl_user_variables test may be executed in various binlog format modes.
In statement mode insert ... select ... limit issues a warning,
in mixed and row modes it does not.
Fixed a test case so it is still possible to execute it in all binlog
format modes by ignoring insert ... select ... limit warnings.
binlog_format=mixed
Statement-based replication of DELETE ... LIMIT, UPDATE ... LIMIT,
INSERT ... SELECT ... LIMIT is not safe as order of rows is not
defined.
With this fix, we issue a warning that this statement is not safe to
replicate in statement mode, or go to row-based mode in mixed mode.
Note that we may consider a statement as safe if ORDER BY primary_key
is present. However it may confuse users to see very similiar statements
replicated differently.
Note 2: regular UPDATE statement (w/o LIMIT) is unsafe as well, but
this patch doesn't address this issue. See comment from Kristian
posted 18 Mar 10:55.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Updated a test case according to fix for BUG#34768:
INSERT ... SELECT ... LIMIT is now replicated in row mode.
mysql-test/suite/binlog/r/binlog_unsafe.result:
A test case for BUG#34768.
mysql-test/suite/binlog/t/binlog_unsafe.test:
A test case for BUG#34768.
sql/sql_delete.cc:
Statement-based replication of DELETE ... LIMIT is not safe as order of
rows is not defined, so in mixed mode we go to row-based.
sql/sql_insert.cc:
Statement-based replication of INSERT ... SELECT ... LIMIT is not safe
as order of rows is not defined, so in mixed mode we go to row-based.
sql/sql_update.cc:
Statement-based replication of UPDATE ... LIMIT is not safe as order of
rows is not defined, so in mixed mode we go to row-based.
using a trig in SP
For all 5.0 and up to 5.1.12 exclusive, when a stored routine or
trigger caused an INSERT into an AUTO_INCREMENT column, the
generated AUTO_INCREMENT value should not be written into the
binary log, which means if a statement does not generate
AUTO_INCREMENT value itself, there will be no Intvar event (SET
INSERT_ID) associated with it even if one of the stored routine
or trigger caused generation of such a value. And meanwhile, when
executing a stored routine or trigger, it would ignore the
INSERT_ID value even if there is a INSERT_ID value available set
by a SET INSERT_ID statement.
Starting from MySQL 5.1.12, the generated AUTO_INCREMENT value is
written into the binary log, and the value will be used if
available when executing the stored routine or trigger.
Prior fix of this bug in MySQL 5.0 and prior MySQL 5.1.12
(referenced as the buggy versions in the text below), when a
statement that generates AUTO_INCREMENT value by the top
statement was executed in the body of a SP, all statements in the
SP after this statement would be treated as if they had generated
AUTO_INCREMENT by the top statement. When a statement that did
not generate AUTO_INCREMENT value by the top statement but by a
function/trigger called by it, an erroneous Intvar event would be
associated with the statement, this erroneous INSERT_ID value
wouldn't cause problem when replicating between masters and
slaves of 5.0.x or prior 5.1.12, because the erroneous INSERT_ID
value was not used when executing functions/triggers. But when
replicating from buggy versions to 5.1.12 or newer, which will
use the INSERT_ID value in functions/triggers, the erroneous
value will be used, which would cause duplicate entry error and
cause the slave to stop.
The patch for 5.1 fixed it to ignore the SET INSERT_ID value when
executing functions/triggers if it is replicating from a master
of buggy versions, another patch for 5.0 fixed it not to generate
the erroneous Intvar event.
mysql-test/include/show_binlog_events.inc:
add $binlog_start parameter to show binlog events from a given position
sql/slave.cc:
Add function to check for bug#33029
sql/slave.h:
Add function to check for bug#33029
sql/sql_class.cc:
if master has bug#33029, reset auto_inc_intervals_forced for sub statements
add a new function Discrete_intervals_list::append that takes a Discrete_interval as argument
sql/sql_class.h:
Add member to save and restore auto_inc_intervals_forced
sql/structs.h:
add copy constructor and assignment operator for Discrete_intervals_list
add a new function Discrete_intervals_list::append that takes a Discrete_interval as argument
mysql-test/std_data/bug33029-slave-relay-bin.000001:
relay logs from a buggy 5.0 master for test case of BUG#33029
mysql-test/suite/binlog/r/binlog_auto_increment_bug33029.result:
Test if the slave can process relay logs from a buggy master of BUG#33029
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029-master.opt:
Test if the slave can process relay logs from a buggy master of BUG#33029
mysql-test/suite/binlog/t/binlog_auto_increment_bug33029.test:
Test if the slave can process relay logs from a buggy master of BUG#33029
safe.
Fix: Move sql_mode: from the section of the test where safe variables are
tested, to the section where unsafe variables are tested.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file of modified test.
Problem: in mixed and statement mode, a query that refers to a
system variable will use the slave's value when replayed on
slave. So if the value of a system variable is inserted into a
table, the slave will differ from the master.
Fix: mark statements that refer to a system variable as "unsafe",
meaning they will be replicated by row in mixed mode and produce a warning
in statement mode. There are some exceptions: some variables are actually
replicated. Those should *not* be marked as unsafe.
BUG#34732: mysqlbinlog does not print default values for auto_increment variables
Problem: mysqlbinlog does not print default values for some variables,
including auto_increment_increment and others. So if a client executing
the output of mysqlbinlog has different default values, replication will
be wrong.
Fix: Always print default values for all variables that are replicated.
I need to fix the two bugs at the same time, because the test cases would
fail if I only fixed one of them.
include/m_ctype.h:
Added definition of ILLEGAL_CHARSET_INFO_NUMBER. We just need a symbol
for a number that will never be used by any charset. ~0U should be safe
since charset numbers are sequential, starting from 0.
mysql-test/include/commit.inc:
Upated test to avoid making statements unsafe.
mysql-test/r/commit_1innodb.result:
Updated test needs updated result file.
mysql-test/r/mysqlbinlog.result:
Updated result file.
mysql-test/r/mysqlbinlog2.result:
Updated result file.
mysql-test/r/user_var-binlog.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_stm_ctype_ucs.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Modified test file needs modified result file.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Need to filter out pseudo_thread_id from result since it is
nondeterministic.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Add tests that using variables is unsafe. The 'CREATE VIEW' tests didn't
make sense, so I removed them. SHOW WARNINGS is not necessary either,
because we get warnings for each statement in the result file.
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Updated result file.
mysql-test/suite/rpl/r/rpl_skip_error.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_skip_error.test:
The test used @@server_id, which is not safe to replicate, so it would
have given a warning. The way it used @@server_id was hackish (issue a
query on master that removes rows only on master), so I replaced it by a
more robust way to do the same thing (connect to slave and insert the
rows only there).
Also clarified what the test case does.
mysql-test/t/mysqlbinlog2.test:
Use --short-form instead of manually filtering out nondeterministic stuff
from mysqlbinlog (because we added the nondeterministic @@pseudo_thread_id
to the output).
sql/item_func.cc:
Added method of Item_func_get_system_var that indicates whether the given
system variable will be written to the binlog or not.
sql/item_func.h:
Added method of Item_func_get_system_var that indicates whether the given
system variable will be written to the binlog or not.
sql/log_event.cc:
- auto_increment_offset was not written to the binlog if
auto_increment_increment=1
- mysqlbinlog did not output default values for some variables
(BUG#34732). In st_print_event_info, we remember for each variable whether
it has been printed or not. This is achieved in different ways for
different variables:
- For auto_increment_*, lc_time_names, charset_database_number,
we set the default values in st_print_event_info to something
illegal, so that it will look like they have changed the first time
they are seen.
- For charset, sql_mode, pseudo_thread_id, we add a flag to
st_print_event_info which indicates whether the variable has been
printed.
- Since pseudo_thread_id is now printed more often, and its value is
not guaranteed to be constant across different runs of the same
test script, I replaced it by a constant if --short-form is used.
- Moved st_print_event_info constructor from log_event.h to log_event.cc,
since it now depends on ILLEGAL_CHARSET_NUMBER, which is defined in
m_ctype.h, which is better to include from a .cc file than from a header
file.
sql/log_event.h:
Added fields to st_print_event_info that indicate whether some of the
variables have been written or not. Since the initialization of
charset_database_number now depends on ILLEGAL_CHARSET_INFO_NUMBER, which
is defined in a header file, which we'd better not include from this
header file -- I moved the constructor from here to log_event.cc.
sql/set_var.cc:
System variables now have a flag binlog_status, which indicates if they
are written to the binlog. If nothing is specified, all variables are
marked as not written to the binlog (NOT_IN_BINLOG) when created. In this
file, the variables that are written to the binlog are marked with
SESSION_VARIABLE_IN_BINLOG.
sql/set_var.h:
Added flag binlog_status to class sys_var. Added a getter and a
constructor parameter that sets it.
Since I had to change sys_var_thd_enum constructor anyways, I simplified
it to use default values of arguments instead of three copies of the
constructor.
sql/sql_yacc.yy:
Mark statements that refer to a system variable as "unsafe",
meaning they will be replicated by row in mixed mode. Added comment to
explain strange piece of code just above.
mysql-test/include/diff_tables.inc:
New auxiliary test file that tests whether two tables (possibly one on
master and one on slave) differ.
mysql-test/suite/rpl/r/rpl_variables.result:
New test case needs new result file.
mysql-test/suite/rpl/r/rpl_variables_stm.result:
New test file needs new result file.
mysql-test/suite/rpl/t/rpl_variables.test:
Test that INSERT of @@variables is replicated correctly (by switching to
row-based mode).
mysql-test/suite/rpl/t/rpl_variables_stm.test:
Test that replication of @@variables which are replicated explicitly works
as expected in statement mode (without giving warnings).
mysql-test/suite/binlog/r/binlog_multi_engine.result:
updated result
mysql-test/suite/binlog/t/binlog_multi_engine.test:
fix for bug#32663
mysql-test/suite/binlog/t/disabled.def:
updated
mysql-test/suite/rpl/r/rpl_invoked_features.result:
updated result
mysql-test/suite/rpl/t/disabled.def:
updated
mysql-test/suite/rpl/t/rpl_invoked_features.test:
fix for bug#33045
mysql-test/suite/bugs/r/rpl_bug23533.result:
result file
mysql-test/suite/bugs/t/rpl_bug23533.test:
test case for bug#23533
because it uses BINLOG statement, which is not supported in embedded mode.
Fix: disable the test in embedded mode.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Must disable this test when running embedded, since BINLOG statements
don't work. This fixes the pushbuild problem on the debx86-b machine on
https://intranet.mysql.com/secure/pushbuild/showpush.pl?dir=mysql-5.1-new-rpl&order=469
Problem: mysqlbinlog does not free memory if an error happens.
Fix: binlog-processing functions do not call exit() anymore. Instead, they
print an error and return an error code. Error codes are propagated all
the way back to main, and all allocated memory is freed on the way.
client/mysqlbinlog.cc:
- New error handling policy: functions processing binlogs don't just
exit() anymore. Instead, they print a message and return an error
status.
- New policy for the global `mysql' and `glob_description_event': these
are not passed as parameters anymore. The global pointer is used
instead.
- More error situations are detected and reported.
- Better error messages: the program never terminates with exit status 1
without explanation any more. Fixed spelling errors. Use consistent
format of messages (a single line beginning with "ERROR: " or
"WARNING: " and ending with "." is printed to stderr.)
- New memory handling: memory is always freed on program termination.
- Better comments: more functions are explained, doxygen is used, and
more precise formulations in some existing comments.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Result file updated since output format of mysqlbinlog changed while the
test was disabled.
mysql-test/suite/binlog/t/binlog_killed.test:
Mysqlbinlog now works as described when the binlog is open. Hence, the
--force-if-open flag must be passed
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
Mysqlbinlog now works as described when the binlog is open. Hence, the
--force-if-open flag must be passed
mysql-test/suite/binlog/t/disabled.def:
Now that mysqlbinlog cleans up after itself on abnormal termination, we
can enable this test again.
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl
include/my_base.h:
Auto merged
mysql-test/include/show_binlog_events2.inc:
Auto merged
mysql-test/suite/binlog/t/binlog_old_versions.test:
Auto merged
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
Auto merged
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Auto merged
mysql-test/suite/rpl/t/rpl_loaddata_map-master.opt:
Auto merged
mysql-test/suite/rpl/t/rpl_loaddata_map-slave.opt:
Auto merged
sql/log_event_old.cc:
Auto merged
sql/sql_binlog.cc:
Auto merged
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
Manual merge.
mysql-test/suite/rpl/r/rpl_user.result:
Manual merge.
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
Manual merge.
mysql-test/suite/rpl/t/rpl_user.test:
Manual merge.
sql/log_event.cc:
Manual merge.
sql/rpl_record.cc:
Manual merge.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result change.
mysql-test/suite/binlog/t/binlog_start_comment.test:
Removing --short-form since that cause test to fail.
Main problem: mysql 5.1 cannot read binlogs from 4.1.
Subproblem 1: There is a mistake in sql_ex_info::init. The read_str()
function updates its first argument to point to the next character to
read. However, it is applied only to a copy of the buffer pointer, so the
real buffer pointer is not updated.
Fix 1: do not take a copy of the buffer pointer. The copy was needed
because sql_ex_info::init does not use the const attribute on some of its
arguments. So we add the const attribute, too.
Subproblem 2: The first BINLOG statement is asserted to be a
FORMAT_DESCRIPTION_LOG_EVENT, but 4.1 binlogs begin with START_EVENT_V3.
Fix 2: allow START_EVENT_V3 too.
mysql-test/suite/binlog/std_data/binlog_old_version_4_1.000001:
New BitKeeper file ``mysql-test/suite/binlog/std_data/binlog_old_version_4_1.000001''
mysql-test/suite/binlog/r/binlog_old_versions.result:
Updated result file.
mysql-test/suite/binlog/t/binlog_old_versions.test:
Added a test reading an old 4.1 binlog.
sql/log_event.cc:
1. Added const keyword at the following places:
- input buffer for pretty_print_str
- input buffer for write_str
- input buffer, end pointer, and return value from sql_ex_info::init
2. Fixed the bug by not taking a copy of buf before calling read_str in
sql_ex_info::init().
sql/log_event.h:
Added const keyword to fields of the sql_ex_info struct.
Added const keyword to arguments and return value of sql_ex_info::init
sql/sql_binlog.cc:
The first BINLOG statement must describe the format for future BINLOG
statements. Otherwise, we do not know how to read the BINLOG statement.
Problem: only FORMAT_DESCRIPTION_EVENT is currently allowed as the first
event. Binlogs from 4.1 begin with a START_EVENT_V3, which serves the
same purpose.
Fix: We now allow the first BINLOG statement to be a START_EVENT_V3, as
well as a FORMAT_DESCRIPTION_EVENT.
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
BitKeeper/deleted/.del-binlog_start_comment.result:
Auto merged
include/my_sys.h:
Auto merged
mysql-test/extra/binlog_tests/blackhole.test:
Auto merged
mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test:
Auto merged
mysql-test/r/case.result:
Auto merged
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Auto merged
mysql-test/suite/rpl/r/rpl_000015.result:
Auto merged
mysql-test/suite/rpl/t/rpl_000015.test:
Auto merged
mysql-test/t/case.test:
Auto merged
sql/log_event.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
BitKeeper/deleted/.del-binlog_start_comment.test:
Using remote file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Manual merge. Taking remote file to update result set after merge,
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
Manual merge.
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Manual merge.
mysql-test/include/show_binlog_events.inc:
Replacing file_id=N with file_id=# to avoid result mismatches
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
Result change
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result change
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Result change
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Result change
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
Binlog positions differ between mixed and statement based replication.
mysql-test/suite/rpl/r/rpl_stm_log.result:
Result change
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
BitKeeper/deleted/.del-binlog_start_comment.result:
Auto merged
BitKeeper/deleted/.del-binlog_start_comment.test:
Auto merged
mysql-test/suite/rpl/r/rpl_timezone.result:
Auto merged
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Manual merge.
mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test:
Fixing test file to use different positions depending
on binlog format.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Result change.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result change.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Result change.
mysql-test/suite/binlog/t/binlog_row_mix_innodb_myisam.test:
Removing part of test that does not work any more.
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
Removing part of test that does not work any more.
mysql-test/suite/rpl_ndb/r/rpl_ndb_transaction.result:
Result change.
mysql-test/suite/rpl_ndb/t/rpl_ndb_transaction.test:
Dropping tables on both master and slave, and not only on slave.
mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test:
Fixing test to use different positions depending on binlog format.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result change.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Result change.
mysql-test/suite/binlog/t/binlog_row_mix_innodb_myisam.test:
Removing part of test that does not work any more.
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
Removing part of test that does not work any more.
Problem: Replication fails when master is mysql-5.1-wl2325-5.0-drop6 and
slave is mysql-5.1-new-rpl. The reason is that, in
mysql-5.1-wl2325-5.0-drop6, the event type id's were different than in
mysql-5.1-new-rpl.
Fix (in mysql-5.1-new-rpl):
(1) detect that the server that generated the events uses the old
format, by checking the server version of the format_description_log_event
This patch recognizes mysql-5.1-wl2325-5.0-drop6p13-alpha,
mysql-5.1-wl2325-5.0-drop6, mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
(2) if the generating server is old, map old event types to new event
types using a permutation array.
I've also added a test case which reads binlogs for four different
versions.
mysql-test/suite/binlog/std_data/binlog_old_version_5_1-telco.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1-telco.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_row.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_row.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_stm.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1-wl2325_stm.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1_17.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1_17.000001
mysql-test/suite/binlog/std_data/binlog_old_version_5_1_23.000001:
BitKeeper file /home/sven/bk/b27779-old_row_events/5.1-new-rpl/mysql-test/suite/binlog/std_data/binlog_old_version_5_1_23.000001
sql/log_event.cc:
Added code to read events generated by
mysql-5.1-wl2325-5.0-drop6p13-alpha, mysql-5.1-wl2325-5.0-drop6,
mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
More precisely, the event type id's had different numbers in
those versions. To fix, we add a permutation array which maps old_id to
new_id when the format_description_log_event indicates that the
originating server is of the old type. We also need to permute the
post_header_len array accordingly.
sql/log_event.h:
sql/log_event.h@1.169, 2008-01-09 11:34:37+01:00, sven@riska.(none) +5 -1
Added declaration needed in log_event.cc. Also, the destructor of
Format_description_log_event is sometimes called when post_header_len is
null, so we must pass the MY_ALLOW_ZERO_PTR flag to my_free.
mysql-test/suite/binlog/r/binlog_old_versions.result:
Result file for new test.
mysql-test/suite/binlog/t/binlog_old_versions.test:
New test case that loads binlogs from several old versions.
into dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl-merge
mysql-test/include/have_multi_ndb.inc:
Auto merged
mysql-test/lib/mtr_cases.pl:
Auto merged
mysql-test/lib/mtr_report.pl:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Auto merged
mysql-test/suite/rpl_ndb/r/rpl_row_basic_7ndb.result:
Auto merged
mysql-test/suite/rpl_ndb/t/disabled.def:
Auto merged
sql/ha_ndbcluster_binlog.cc:
Auto merged
sql/log.cc:
Auto merged
sql/log_event_old.cc:
Auto merged
sql/mysql_priv.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/rpl_rli.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/slave.cc:
Auto merged
sql/sql_binlog.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_string.cc:
Auto merged
mysql-test/Makefile.am:
SCCS merged
mysql-test/mysql-test-run.pl:
Manual merge.
mysql-test/suite/binlog/t/disabled.def:
Manual merge.
mysql-test/suite/rpl/r/rpl_row_tabledefs_2myisam.result:
Manual merge.
mysql-test/suite/rpl/r/rpl_row_tabledefs_3innodb.result:
Manual merge.
sql/log_event.cc:
Manual merge.
,
into hezx.(none):/media/sda3/work/mysql/bkwork/bug#32205/mysql-5.1-new-rpl
mysql-test/r/mysqlbinlog2.result:
Auto merged
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Auto merged
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Auto merged
sql/log_event.cc:
Auto merged
fine
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
mysql-test/r/mysqlbinlog.result:
Update result for BUG#32205
mysql-test/r/mysqlbinlog2.result:
Update result for BUG#32205
mysql-test/r/user_var-binlog.result:
Update result for BUG#32205
mysql-test/suite/binlog/r/binlog_stm_ctype_ucs.result:
Update result for BUG#32205
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Update result for BUG#32205
mysql-test/suite/binlog/t/binlog_stm_mix_innodb_myisam.test:
fix test for BUG#32205
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Update result for BUG#32205
mysql-test/suite/rpl/r/rpl_stm_charset.result:
Update result for BUG#32205
sql/log_event.cc:
Start a newline before appending delimiter after a query string
mysql-test/suite/binlog/r/binlog_start_comment.result:
Add test for BUG#32205
mysql-test/suite/binlog/t/binlog_start_comment.test:
Add test for BUG#32205
Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD). Currently, mysqlbinlog
cannot print the FD.
As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.
This patch does several things:
- Format_description_log_event (FD) now print themselves in base64
format.
- mysqlbinlog is now able to print FD events. It has three modes:
--base64-output=auto Print row events in base64 output, and print
FD event. The FD event is printed even if
it is outside the range specified with
--start-position, because it would not be
safe to read row events otherwise. This is
the default.
--base64-output=always Like --base64-output=auto, but also print
base64 output for query events. This is
like the old --base64-output flag, which
is also a shorthand for
--base64-output=always
--base64-output=never Never print base64 output, generate error if
row events occur in binlog. This is
useful to suppress the FD event in binlogs
known not to contain row events (e.g.,
because BINLOG statement is unsafe,
requires root privileges, is not SQL, etc)
- the BINLOG statement now handles FD events correctly, by setting
the thread's rli's relay log's description_event_for_exec to the
loaded event.
In fact, executing a BINLOG statement is almost the same as reading
an event from a relay log. Before my patch, the code for this was
separated (exec_relay_log_event in slave.cc executes events from
the relay log, mysql_client_binlog_statement in sql_binlog.cc
executes BINLOG statements). I needed to augment
mysql_client_binlog_statement to do parts of what
exec_relay_log_event does. Hence, I did a small refactoring and
moved parts of exec_relay_log_event to a new function, which I
named apply_event_and_update_pos. apply_event_and_update_pos is
called both from exec_relay_log_event and from
mysql_client_binlog_statement.
- When a non-FD event is executed in a BINLOG statement, without
previously executing a FD event in a BINLOG statement, it generates
an error, because that's unsafe. I took a new error code for that:
ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.
In order to get a decent error message containing the name of the
event, I added the class method char*
Log_event::get_type_str(Log_event_type type), which returns a
string name for the given Log_event_type. This is just like the
existing char* Log_event::get_type_str(), except it is a class
method that takes the log event type as parameter.
I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
so that names of old rows event are properly printed.
- When reading an event, I added a check that the event type is known
by the current Format_description_log_event. Without this, it may
crash on bad input (and I was struck by this several times).
- I patched the following test cases, which all contain BINLOG
statements for row events which must be preceded by BINLOG
statements for FD events:
- rpl_bug31076
While I was here, I fixed some small things in log_event.cc:
- replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places
- replaced return by DBUG_VOID_RETURN in one place
- The name of the logfile can be '-' to indicate stdin. Before my
patch, the code just checked if the first character is '-'; now it
does a full strcmp(). Probably, all arguments that begin with a -
are already handled somewhere else as flags, but I still think it
is better that the code reflects what it is supposed to do, with as
little dependencies as possible on other parts of the code. If we
one day implement that all command line arguments after -- are
files (as most unix tools do), then we need this.
I also fixed the following in slave.cc:
- next_event() was declared twice, and queue_event was not static but
should be static (not used outside the file).
client/client_priv.h:
Declared the new option for base64 output.
client/mysqlbinlog.cc:
- Change from using the two-state command line option
"default/--base64-output" to the three-state
"--base64-output=[never|auto|always]"
- Print the FD event even if it is outside the --start-position range.
- Stop if a row event is about to be printed without a preceding FD
event.
- Minor fixes:
* changed 4 to EVENT_TYPE_OFFSET in some places
* Added comments
* before, "mysqlbinlog -xyz" read from stdin; now it does not
(only "mysqlbinlog -" reads stdin).
mysql-test/r/mysqlbinlog2.result:
Updated result file: mysqlbinlog now prints ROLLBACK always.
mysql-test/suite/binlog/t/disabled.def:
The test must be disabled since it reveals another bug: see BUG#33247.
mysql-test/suite/rpl/r/rpl_bug31076.result:
Updated result file
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Updated result file
mysql-test/suite/rpl/t/rpl_bug31076.test:
Had to add explicit Format_description_log_event before other BINLOG
statements
mysql-test/t/mysqlbinlog2.test:
we must suppress base64 output in result file because it contains a
timestamp
sql/log_event.cc:
- Made FD events able to print themselves
- Added check that the current FD event knows about the event type, when
an event is about to be read. (Hint to reviewers: I had to re-indent
a big block because of this; use diff -b)
* To get a decent error message, I also added a class method
const char* Log_event::get_type_str(Log_event_type)
which converts number to event type string without having a
Log_event object.
* Made Log_event::get_type_str aware of PRE_GA_*_ROWS_LOG_EVENT.
- Minor fixes:
* Changed return to DBUG_VOID_RETURN
sql/log_event.h:
- Declared enum to describe the three base64_output modes
- Use the enum instead of a flag
- Declare the new class method get_type_str (see log_event.cc)
sql/share/errmsg.txt:
Added error msg.
sql/slave.cc:
- Factored out part of exec_relay_log_event to the new function
apply_event_and_update_pos, because that code is needed when executing
BINLOG statements. (this is be functionally equivalent to the
previous code, except: (1) skipping events is now optional, controlled
by a parameter to the new function (2) the return value of
exec_relay_log_event has changed; see next item).
- Changed returned error value to always be 1. Before, it would return
the error value from apply_log_event, which was unnecessary. This
change is safe because the exact return value of exec_relay_log_event
is never examined; it is only tested to be ==0 or !=0.
- Added comments describing exec_relay_log_event and
apply_event_and_update_pos.
- Minor fixes:
* Removed duplicate declaration of next_event, made queue_event
static.
* Added doxygen code to include this file.
sql/slave.h:
Declared the new apply_event_and_update_pos
sql/sql_binlog.cc:
- Made mysql_binlog_statement set the current FD event when the given
event is an FD event. This entails using the new function
apply_event_and_update_pos from slave.cc instead of just calling the
ev->apply method.
- Made mysql_binlog_statement fail if the first BINLOG statement is not
an FD event.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
New test file needs new result file
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Added test case to verify that:
- my patch fixes the bug
- the new --base64-output flag works as expected
- base64 events not preceded by an FD event give an error
- an event of a type not known by the current FD event fails cleanly.
mysql-test/suite/binlog/std_data/binlog-bug32407.000001:
BitKeeper file /home/sven/bk/b32407-5.1-new-rpl-mysqlbinlog_base64/mysql-test/suite/binlog/std_data/binlog-bug32407.000001
into stella.local:/home2/mydev/mysql-5.1-axmrg
include/my_base.h:
Auto merged
mysql-test/mysql-test-run.pl:
Auto merged
mysql-test/suite/ndb/t/disabled.def:
Auto merged
mysql-test/t/partition.test:
Auto merged
sql/handler.cc:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/slave.cc:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
client/mysql.cc:
Manual merge
mysql-test/suite/rpl/t/disabled.def:
Manual merge
DROP DATABASE statement writes changes to mysql.proc table under RBR
When replicating a DROP DATABASE statement with a database holding
stored procedures, the changes to the mysql.proc table was recorded
in the binary log under row-based replication.
With this patch, the thread uses statement-logging format for the
duration of the DROP DATABASE statement. The logging format is
(already) reset at the end of the statement, so no additional code
for resetting the logging format is necessary.
sql/sql_db.cc:
Clearing the row-based statement flag for the DROP DATABASE statement
since it should always be replicated as a statement.
mysql-test/extra/binlog_tests/database.test:
New BitKeeper file ``mysql-test/extra/binlog_tests/database.test''
mysql-test/suite/binlog/r/binlog_database.result:
New BitKeeper file ``mysql-test/suite/binlog/r/binlog_database.result''
mysql-test/suite/binlog/t/binlog_database.test:
New BitKeeper file ``mysql-test/suite/binlog/t/binlog_database.test''
into koti.dsl.inet.fi:/home/elkin/MySQL/merge-5.1
mysql-test/suite/binlog/r/binlog_killed.result:
Auto merged
mysql-test/suite/binlog/t/binlog_killed.test:
Auto merged
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Auto merged
mysql-test/suite/rpl/t/rpl_temporary.test:
manual merge
sql/log.cc:
manual merge
non-deterministic tests refining.
This particular patch tested on two archs.
mysql-test/suite/binlog/t/binlog_killed.test:
deploying synchronization of killing with reaching the explected state
of the prey's connection.
non-deterministic tests execution on some platforms.
mysql-test/suite/binlog/r/binlog_killed.result:
results changed
mysql-test/suite/binlog/t/binlog_killed.test:
correcting the prev test's cleanup;
increasing time to wait by to be killed query;
adding the masking out error due to Bug@32140 wrong error code caught when an SF() call is interruped with KILL query
refining tests as they appear to be non-deterministic.
mysql-test/suite/binlog/r/binlog_killed.result:
results changed
mysql-test/suite/binlog/t/binlog_killed.test:
restructuring the test to deliver more deterministic outcome.
order-by for update and delete did not guaratee the order of scanning.
--error are masked with zero in order to catch more info if killing
really will happen to be non-deterministic on some platform (witnessed
something like that on dl145j)
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
important guard added
destination. Removing wrong (local temp) tests.
mysql-test/suite/binlog/t/binlog_killed_simulate-master.opt:
Rename: mysql-test/t/binlog_killed_simulate-master.opt -> mysql-test/suite/binlog/t/binlog_killed_simulate-master.opt
BitKeeper/deleted/.del-binlog_killed_bug27571.test:
Delete: mysql-test/t/binlog_killed_bug27571.test
BitKeeper/deleted/.del-binlog_killed_bug27571-master.opt:
Delete: mysql-test/t/binlog_killed_bug27571-master.opt
mysql-test/suite/binlog/r/binlog_killed.result:
results changed
mysql-test/suite/binlog/t/binlog_killed.test:
binlog offset made 5.1 specific
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
binlog offset + guard to run the test with stmt/mixed format
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
new results file
into koti.dsl.inet.fi:/home/elkin/MySQL/5.1-merge-bug27571
client/mysql.cc:
Auto merged
mysql-test/r/ctype_euckr.result:
Auto merged
mysql-test/r/ctype_uca.result:
Auto merged
mysql-test/suite/binlog/r/binlog_killed.result:
Auto merged
mysql-test/suite/binlog/t/binlog_killed.test:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/log_event.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
strings/ctype-euc_kr.c:
Auto merged
mysql-test/suite/rpl/r/rpl_sp_effects.result:
manual merge ul
mysql-test/suite/rpl/t/rpl_sp_effects.test:
manual merge
sql/slave.cc:
leaving for manual merge
sql/sql_delete.cc:
leaving for manual merge
sql/sql_insert.cc:
leaving for manual merge
sql/sql_load.cc:
leaving for manual merge
sql/sql_update.cc:
leaving for manual merge
