When processing aggregate functions all tables values are reset
to NULLs at the end of each group.
When doing that if there are no rows found for a group
the const tables must not be reset as they are not recalculated
by do_select()/sub_select() for each group.
mysql-test/r/subselect2.result:
* Bug #20792: Incorrect results from aggregate subquery
- test suite for the bug. This is dependent on InnoDB despite
the fact that the bug and the fix are not InnoDB specific.
This is because of the table flag HA_NOT_EXACT_COUNT.
When this flag is off (as in MyISAM) both t2 and t3 become of
join type 'system' as they are estimated to have 1 record and
and this statistics can be trusted (according to the absence of
HA_NOT_EXACT_COUNT).
mysql-test/t/subselect2.test:
* Bug #20792: Incorrect results from aggregate subquery
- test suite for the bug
sql/sql_select.cc:
* Bug #20792: Incorrect results from aggregate subquery
- when clearing results if there are not rows found for group
the const tables must not be reset as they are not recalculated
for each group.
When optimizing conditions like 'a = <some_val> OR a IS NULL' so that they're
united into a single condition on the key and checked together the server must
check which value is the NULL value in a correct way : not only using ->is_null
but also check if the expression doesn't depend on any tables referenced in the
current statement.
This additional check must be performed because that optimization takes place
before the actual execution of the statement, so if the field was initialized
to NULL from a previous statement the optimization would be applied incorrectly.
mysql-test/r/select.result:
Bug #21019: First result of SELECT COUNT(*) different than consecutive runs
- test case
mysql-test/t/select.test:
Bug #21019: First result of SELECT COUNT(*) different than consecutive runs
- test case.
Note that ALTER TABLE is important here : it happens to
leave the Field instance for t1.b set to NULL, witch is vital for
demonstrating the problem fixed by this changeset.
sql/sql_select.cc:
Bug #21019: First result of SELECT COUNT(*) different than consecutive runs
- check whether a value is null taking into account its table dependency.
The problem was in that opt_sum_query() replaced MIN/MAX functions
with the corresponding constant found in a key, but due to imprecise
representation of float numbers, when evaluating the where clause,
this comparison failed.
When MIN/MAX optimization detects that all tables can be removed,
also remove all conjuncts in a where clause that refer to these
tables. As a result of this fix, these conditions are not evaluated
twice, and in the case of float number comparisons we do not discard
result rows due to imprecise float representation.
As a side-effect this fix also corrects an unnoticed problem in
bug 12882.
mysql-test/r/func_group.result:
BUG#20954 - test result adjustment.
Adjusted the test result of bug 12882 which was not preperly fixed.
The current patch corrects the problem that was fully corrected by the
patch for 12882.
The problem was that opt_sum_query() indicated that the optimizer may
remove all tables because all MIN/MAX/COUNT functions are constants,
but this lead to an empty result instead of NULL because the WHERE
clause was still evaluated.
The current fix removes all conjuncts in the where clause that
reference the removed tables, and thus corrects the problem.
mysql-test/r/select.result:
BUG#20954 - added test
mysql-test/r/subselect.result:
BUG#20954 - test result adjustment.
The fix removes those conditions in a where clause that refer to
tables optimized away by MIN/MAX optimization (opt_sum_query()).
mysql-test/t/select.test:
BUG#20954 - added test
sql/sql_select.cc:
Fix for BUG#20954: avg(keyval) retuns 0.38 but max(keyval) returns an empty set
When MIN/MAX optimization detects that all tables can be removed,
also remove all conjuncts in a where clause that refer to these
tables. As a result of this fix, these conditions are not evaluated
twice, and in the case of float number comparisons we do not discard
result rows due to imprecise float representation.
As a side-effect this fix also corrects an unnoticed problem in
bug 12882.
LIKE craashed with a pattern having letters in the range 128..255
(e.g. A WITH ACUTE or C WITH CARON) because of wrong cast from
signed char to unsigned int.
mysql-test/r/ctype_cp1250_ch.result:
Adding test case
mysql-test/t/ctype_cp1250_ch.test:
Adding test case
strings/ctype-win1250ch.c:
Fixing wrong cast from "signed char" -> "uint" to
"signed char" -> "unsigned char" -> uint, to properly
handle bytes 128..255.
The main problem was already fixed by Igor under terms of 16674.
Adding some additional minor fixes and tests.
include/m_ctype.h:
Adding reference to CHARSET_INFO.txt
mysql-test/r/ctype_utf8.result:
Adding test case
mysql-test/t/ctype_utf8.test:
Adding test case
strings/CHARSET_INFO.txt:
Adding comment about max_sort_char
strings/ctype-mb.c:
Restiring that non-Unicode character sets use 0xFF as pad character
for max_str. Only Unicode character sets use wc_mb.
strings/ctype-utf8.c:
Fixed that max_sort_char for UTF8 from U+00FF to U+FFFF.
for class Item_func_trim.
For 4.1 it caused wrong output for EXPLAIN EXTENDED commands
if expressions with the TRIM function of two arguments were used.
For 5.0 it caused an error message when trying to select
from a view with the TRIM function of two arguments.
This unexpected error message was due to the fact that the
print method for the class Item_func_trim was inherited from
the class Item_func. Yet the TRIM function does not take a list
of its arguments. Rather it takes the arguments in the form:
[{BOTH | LEADING | TRAILING} [remstr] FROM] str) |
[remstr FROM] str
mysql-test/r/func_str.result:
Added a test case for bug #17526: uncorrect print method
for class Item_func_trim.
mysql-test/t/func_str.test:
Added a test case for bug #17526: incorrect print method
for class Item_func_trim.
sql/item_strfunc.cc:
Fixed bug #17526: incorrect print method
for class Item_func_trim.
Added an implementation for the virtual function print
in the class Item_func_trim.
The implementation takes into account the fact the TRIM
function takes the arguments in the following forms:
[{BOTH | LEADING | TRAILING} [remstr] FROM] str) |
[remstr FROM] str
sql/item_strfunc.h:
Fixed bug #17526: incorrect print method
for class Item_func_trim.
Added an implementation for the virtual function print
in the class Item_func_trim.
Declared a virtual method to return the mode of the TRIM
function: LEADING, TRAILING or BOTH.
Added implementations of this method for Item_func_trim and
its descendants Item_func_ltrim and Item_func_rtrim.
into moonbone.local:/work/tmp_merge-4.1-opt-mysql
mysql-test/r/date_formats.result:
Auto merged
mysql-test/t/date_formats.test:
Auto merged
sql/item_strfunc.cc:
Auto merged
sql/sql_class.cc:
Auto merged
do not look for client-specific commands while inside a multi-line comment.
we will allow multi-comments pretty much anywhere within SQL-statements,
but client-specific commands (help, use, print, ...) must be the first token
in the input.
client/mysql.cc:
Bug#20432: mysql client interprets commands in comments
mysql-test/r/mysql_client.result:
Bug#20432: mysql client interprets commands in comments
test client-side parsing of comments and client-specific commands
mysql-test/t/mysql_client.test:
Bug#20432: mysql client interprets commands in comments
test client-side parsing of comments and client-specific commands
* don't use join cache when the incoming data set is already ordered
for ORDER BY
This choice must be made because join cache will effectively
reverse the join order and the results will be sorted by the index
of the table that uses join cache.
mysql-test/r/innodb_mysql.result:
Bug #17212 results not sorted correctly by ORDER BY when using index
* Test suite for the bug
mysql-test/t/innodb_mysql.test:
Bug #17212 results not sorted correctly by ORDER BY when using index
* Test suite for the bug
sql/sql_select.cc:
Bug #17212 results not sorted correctly by ORDER BY when using index
* don't use join cache when the incoming data set is already sorted
may return a wrong result.
An Item_sum_hybrid object has the was_values flag which indicates whether any
values were added to the sum function. By default it is set to true and reset
to false on any no_rows_in_result() call. This method is called only in
return_zero_rows() function. An ALL/ANY subquery can be optimized by MIN/MAX
optimization. The was_values flag is used to indicate whether the subquery
has returned at least one row. This bug occurs because return_zero_rows() is
called only when we know that the select will return zero rows before
starting any scans but often such information is not known.
In the reported case the return_zero_rows() function is not called and
the was_values flag is not reset to false and yet the subquery return no rows
Item_func_not_all and Item_func_nop_all functions return a wrong
comparison result.
The end_send_group() function now calls no_rows_in_result() for each item
in the fields_list if there is no rows were found for the (sub)query.
mysql-test/t/subselect.test:
Added test case for bug#18503: Queries with a quantified subquery returning empty set may return a wrong result.
mysql-test/r/subselect.result:
Added test case for bug#18503: Queries with a quantified subquery returning empty set may return a wrong result.
sql/sql_select.cc:
Fixed bug#18503: Queries with a quantified subquery returning empty set may return a wrong result.
The end_send_group() function now calls no_rows_in_result() for each item
in the fields_list if there is no matching rows were found.
The problem is that the author used the wrong function to send a warning to the
user about truncation of data. push_warning() takes a constant string and
push_warning_printf() takes a format and variable arguments to fill it.
Since the string we were complaining about contains percent characters, the
printf() code interprets the "%Y" et c. that the user sends. That's wrong, and
often causes a crash, especially if the date mentions seconds, "%s".
A alternate fix would be to use push_warning_printf(..., "%s", warn_buff) .
mysql-test/r/date_formats.result:
Test that an invalid date doesn't crash the server. We should get a warning back
instead of a dead socket.
mysql-test/t/date_formats.test:
Test that an invalid date doesn't crash the server. We should get a warning back
instead of a dead socket.
sql/time.cc:
Don't try to use warn_buf as the start of a varible arguement list to send
to a warning-formatted my_vsnprintf() .
The ALL/ANY subqueries are the subject of MIN/MAX optimization. The matter
of this optimization is to embed MIN() or MAX() function into the subquery
in order to get only one row by which we can tell whether the expression
with ALL/ANY subquery is true or false.
But when it is applied to a subquery like 'select a_constant' the reported bug
occurs. As no tables are specified in the subquery the do_select() function
isn't called for the optimized subquery and thus no values have been added
to a MIN()/MAX() function and it returns NULL instead of a_constant.
This leads to a wrong query result.
For the subquery like 'select a_constant' there is no reason to apply
MIN/MAX optimization because the subquery anyway will return at most one row.
Thus the Item_maxmin_subselect class is more appropriate for handling such
subqueries.
The Item_in_subselect::single_value_transformer() function now checks
whether tables are specified for the subquery. If no then this subselect is
handled like a UNION using an Item_maxmin_subselect object.
mysql-test/t/subselect.test:
Added test case for bug#16302: Quantified subquery without any tables gives wrong results
mysql-test/r/subselect.result:
Added test case for bug#16302: Quantified subquery without any tables gives wrong results
sql/item_subselect.cc:
Fixed bug#16302: Quantified subquery without any tables gives wrong results
The Item_in_subselect::single_value_transformer() function now checks
whether tables are specified for the subquery. If no then this subselect is
handled like a UNION using an Item_maxmin_subselect object.
To make MySQL compatible with some ODBC applications, you can find
the AUTO_INCREMENT value for the last inserted row with the following query:
SELECT * FROM tbl_name WHERE auto_col IS NULL.
This is done with a special code that replaces 'auto_col IS NULL' with
'auto_col = LAST_INSERT_ID'.
However this also resets the LAST_INSERT_ID to 0 as it uses it for a flag
so as to ensure that only the first SELECT ... WHERE auto_col IS NULL
after an INSERT has this special behaviour.
In order to avoid resetting the LAST_INSERT_ID a special flag is introduced
in the THD class. This flag is used to restrict the second and subsequent
SELECTs instead of LAST_INSERT_ID.
mysql-test/r/odbc.result:
test suite for the bug
mysql-test/r/rpl_insert_id.result:
test for the fix in replication
mysql-test/t/odbc.test:
test suite for the bug
mysql-test/t/rpl_insert_id.test:
test for the fix in replication
sql/sql_class.cc:
initialize the flag
sql/sql_class.h:
flag's declaration and set code when setting the last_insert_id
sql/sql_select.cc:
the special flag is used instead of last_insert_id
dropping/creating tables".
The bug could lead to a crash when multi-delete statements were
prepared and used with temporary tables.
The bug was caused by lack of clean-up of multi-delete tables before
re-execution of a prepared statement. In a statement like
DELETE t1 FROM t1, t2 WHERE ... the first table list (t1) is
moved to lex->auxilliary_table_list and excluded from lex->query_tables
or select_lex->tables. Thus it was unaccessible to reinit_stmt_before_use
and not cleaned up before re-execution of a prepared statement.
mysql-test/r/ps.result:
Updated test results (Bug#19399)
mysql-test/t/ps.test:
A test case for Bug#19399 "Stored Procedures 'Lost Connection' when
dropping/creating tables": test that multi-delete
tables are cleaned up properly before re-execution.
sql/sql_lex.cc:
Always initialize auxilliary_table_list when we initialize the lex:
this way we don't have to check that lex->sql_command equals to
SQLCOM_DELETE_MULTI whenever we need to access auxilliary_table_list.
In particular, in reinit_stmt_before_use we can simply check that
auxilliary_table_list is not NULL and clean it up if the check returns
a true value.
sql/sql_prepare.cc:
Move the one table clean-up functionality to a method of st_table_list.
Clean up auxiliary_table_list if it's not empty.
sql/table.cc:
Implement st_table_list::reinit_before_use().
sql/table.h:
Declare st_table_list::reinit_before_use().
The implementation of the method Item_func_reverse::val_str
for the REVERSE function modified the argument of the function.
This led to wrong results for expressions that contained
REVERSE(ref) if ref occurred somewhere else in the expressions.
mysql-test/r/func_str.result:
Added a test case for bug #18243.
mysql-test/t/func_str.test:
Added a test case for bug #18243.
sql/item_strfunc.cc:
Fixed bug #18243.
The implementation of the method Item_func_reverse::val_str
for the REVERSE function modified the argument of the function.
This led to wrong results for expressions that contained
REVERSE(ref) if ref occurred somewhere else in the expressions.
The implementation of Item_func_reverse::val_str has been changed
to make the argument intact.
sql/item_strfunc.h:
Fixed bug #18243.
Added tmp_value to the Item_func_reverse class to store
the result of the function. It erroneously replaced the
argument before this fix.
"temporary table with data directory option fails"
myisam should not use user-specified table name when creating
temporary tables and use generated connection specific real name.
Test included.
myisam/mi_create.c:
Bug#8706
When creating a temporary table with directory override, ensure that
the real filename is using the hidden temporary name otherwise
multiple clients cannot have same named temporary tables without
conflict.
mysql-test/r/myisam.result:
Bug#8706
Test for bug
mysql-test/t/myisam.test:
Bug#8706
Test for bug
(implemented by by Josh Chamas)
libmysqld/Makefile.am:
Adding new source file
mysql-test/r/date_formats.result:
Adding test case
mysql-test/t/date_formats.test:
Adding test case
sql/Makefile.am:
Adding new source file
BitKeeper/etc/ignore:
Added libmysqld/sql_locale.cc to the ignore list
sql/item_timefunc.cc:
Using current locale data, instead of hard coded English names.
sql/mysql_priv.h:
Adding new type MY_LOCALE, and declaring new global variables.
sql/set_var.cc:
Adding "lc_time_names" system variable.
sql/set_var.h:
Adding "lc_time_names" system variable.
sql/sql_cache.cc:
Adding lc_time_names as a query cache flag.
sql/sql_class.cc:
Setting default locale to en_US
sql/sql_class.h:
Adding locale variable into system_variables.
sql/sql_locale.cc:
Adding new file with locale data for various languages
running)
I decided to make ps_1general test independent from actual number of
threads running
mysql-test/r/ps_1general.result:
result fixed
mysql-test/t/ps_1general.test:
as i think we don't really care about the number of threads running
i just replace the number with '#'
mysql-test/r/key.result:
Fixed result after removing wrong bug fix
mysql-test/t/key.test:
Added SHOW CREATE TABLE, which is the proper way to check for table definitions
sql/table.cc:
Reverted wrong bug fix.
The intention with the original code was to show that MySQL treats the first
given unique key as a primary key. Clients can use the marked primary key as a
real primary key to validate row changes in case of conflicting updates. The
ODBC driver (and other drivers) may also use this fact to optimize/check
updates and handle conflicts. The marked key also shows what some engines, like InnoDB or NDB,
will use as it's internal primary key.
For checking if someone has declared a true PRIMARY KEY, one should use 'SHOW CREATE TABLE'
- Added comments.
- Make SEL_ARG::clone() set SEL_ARG::elements in the created copy.
mysql-test/r/range.result:
BUG#16168: Testcase
mysql-test/t/range.test:
BUG#16168: Testcase
