Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.
We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
comment can't be read back
A change to the lexer in 5.1 caused slash-asterisk-bang-version
sections to be terminated early if there exists a slash-asterisk-
style comment inside it. Nesting comments is usually illegal,
but we rely on versioned comment blocks in mysqldump, and the
contents of those sections must be allowed to have comments.
The problem was that when encountering open-comment tokens and
consuming -or- passing through the contents, the "in_comment"
state at the end was clobbered with the not-in-a-comment value,
regardless of whether we were in a comment before this or not.
So, """/*!VER one /* two */ three */""" would lose its in-comment
state between "two" and "three". Save the echo and in-comment
state, and restore it at the end of the comment if we consume a
comment.
The problem is that a SELECT .. FOR UPDATE statement might open
a table and later wait for a impeding global read lock without
noticing whether it is holding a table that is being waited upon
the the flush phase of the process that took the global read
lock.
The same problem also affected the following statements:
LOCK TABLES .. WRITE
UPDATE .. SET (update and multi-table update)
TRUNCATE TABLE ..
LOAD DATA ..
The solution is to make the above statements wait for a impending
global read lock before opening the tables. If there is no
impending global read lock, the statement raises a temporary
protection against global read locks and progresses smoothly
towards completion.
Important notice: the patch does not try to address all possible
cases, only those which are common and can be fixed unintrusively
enough for 5.0.
An unnecessarily restrictive lock were taken on sub-SELECTs during DELETE.
During parsing, a global structure is reused for sub-SELECTs and the attribute
keeping track of lock options were not reset properly.
This patch introduces a new attribute to keep track on the syntactical lock
option elements found in a sub-SELECT and then sets the lock options accordingly.
Now the sub-SELECTs will try to acquire a READ lock if possible
instead of a WRITE lock as inherited from the outer DELETE statement.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
on non-partitioned table
Problem was that partitioning specific commands was accepted
for non partitioned tables and treated like
ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE, after bug-20129 was fixed,
which changed the code path from mysql_alter_table to
mysql_admin_table.
Solution was to check if the table was partitioned before
trying to execute the admin command
``FLUSH TABLES WITH READ LOCK''
Concurrent execution of 1) multitable update with a
NATURAL/USING join and 2) a such query as "FLUSH TABLES
WITH READ LOCK" or "ALTER TABLE" of updating table led
to a server crash.
The mysql_multi_update_prepare() function call is optimized
to lock updating tables only, so it postpones locking to
the last, and if locking fails, it does cleanup of modified
syntax structures and repeats a query analysis. However,
that cleanup procedure was incomplete for NATURAL/USING join
syntax data: 1) some Field_item items pointed into freed
table structures, and 2) the TABLE_LIST::join_columns fields
was not reset.
Major change:
short-living Field *Natural_join_column::table_field has
been replaced with long-living Item*.
columns data types
The "SELECT @lastId, @lastId := Id FROM t" query returns
different result sets depending on the type of the Id column
(INT or BIGINT).
Note: this fix doesn't cover the case when a select query
references an user variable and stored function that
updates a value of that variable, in this case a result
is indeterminate.
The server uses incorrect assumption about a constantness of
an user variable value as a select list item:
The server caches a last query number where that variable
was changed and compares this number with a current query
number. If these numbers are different, the server guesses,
that the variable is not updating in the current query, so
a respective select list item is a constant. However, in some
common cases the server updates cached query number too late.
The server has been modified to memorize user variable
assignments during the parse phase to take them into account
on the next (query preparation) phase independently of the
order of user variable references/assignments in a select
item list.
This fix is for 5.0 only : back porting the 6.0 patch manually
The parser code in sql/sql_yacc.yy needs to be more robust to out of
memory conditions, so that when parsing a query fails due to OOM,
the thread gracefully returns an error.
Before this fix, a new/alloc returning NULL could:
- cause a crash, if dereferencing the NULL pointer,
- produce a corrupted parsed tree, containing NULL nodes,
- alter the semantic of a query, by silently dropping token values or nodes
With this fix:
- C++ constructors are *not* executed with a NULL "this" pointer
when operator new fails.
This is achieved by declaring "operator new" with a "throw ()" clause,
so that a failed new gracefully returns NULL on OOM conditions.
- calls to new/alloc are tested for a NULL result,
- The thread diagnostic area is set to an error status when OOM occurs.
This ensures that a request failing in the server properly returns an
ER_OUT_OF_RESOURCES error to the client.
- OOM conditions cause the parser to stop immediately (MYSQL_YYABORT).
This prevents causing further crashes when using a partially built parsed
tree in further rules in the parser.
No test scripts are provided, since automating OOM failures is not
instrumented in the server.
Tested under the debugger, to verify that an error in alloc_root cause the
thread to returns gracefully all the way to the client application, with
an ER_OUT_OF_RESOURCES error.
build)
The crash was caused by freeing the internal parser stack during the parser
execution.
This occured only for complex stored procedures, after reallocating the parser
stack using my_yyoverflow(), with the following C call stack:
- MYSQLparse()
- any rule calling sp_head::restore_lex()
- lex_end()
- x_free(lex->yacc_yyss), xfree(lex->yacc_yyvs)
The root cause is the implementation of stored procedures, which breaks the
assumption from 4.1 that there is only one LEX structure per parser call.
The solution is to separate the LEX structure into:
- attributes that represent a statement (the current LEX structure),
- attributes that relate to the syntax parser itself (Yacc_state),
so that parsing multiple statements in stored programs can create multiple
LEX structures while not changing the unique Yacc_state.
Now, Yacc_state and the existing Lex_input_stream are aggregated into
Parser_state, a structure that represent the complete state of the (Lexical +
Syntax) parser.
Mixing aggregate functions and non-grouping columns is not allowed in the
ONLY_FULL_GROUP_BY mode. However in some cases the error wasn't thrown because
of insufficient check.
In order to check more thoroughly the new algorithm employs a list of outer
fields used in a sum function and a SELECT_LEX::full_group_by_flag.
Each non-outer field checked to find out whether it's aggregated or not and
the current select is marked accordingly.
All outer fields that are used under an aggregate function are added to the
Item_sum::outer_fields list and later checked by the Item_sum::check_sum_func
function.
