If LOAD DATA INFILE featured a SET clause, the name=value pairs
would be regenerated using item::print. Unfortunately, that code
is mostly optimized for EXPLAIN EXTENDED output and such, and can
not be relied on to return valid SQL.
We now name each value its original, user-supplied form and use
that to create LOAD DATA INFILE statements for statement-based
replication.
Major replication test framework cleanup. This does the following:
- Ensure that all tests clean up the replication state when they
finish, by making check-testcase check the output of SHOW SLAVE STATUS.
This implies:
- Slave must not be running after test finished. This is good
because it removes the risk for sporadic errors in subsequent
tests when a test forgets to sync correctly.
- Slave SQL and IO errors must be cleared when test ends. This is
good because we will notice if a test gets an unexpected error in
the slave threads near the end.
- We no longer have to clean up before a test starts.
- Ensure that all tests that wait for an error in one of the slave
threads waits for a specific error. It is no longer possible to
source wait_for_slave_[sql|io]_to_stop.inc when there is an error
in one of the slave threads. This is good because:
- If a test expects an error but there is a bug that causes
another error to happen, or if it stops the slave thread without
an error, then we will notice.
- When developing tests, wait_for_*_to_[start|stop].inc will fail
immediately if there is an error in the relevant slave thread.
Before this patch, we had to wait for the timeout.
- Remove duplicated and repeated code for setting up unusual replication
topologies. Now, there is a single file that is capable of setting
up arbitrary topologies (include/rpl_init.inc, but
include/master-slave.inc is still available for the most common
topology). Tests can now end with include/rpl_end.inc, which will clean
up correctly no matter what topology is used. The topology can be
changed with include/rpl_change_topology.inc.
- Improved debug information when tests fail. This includes:
- debug info is printed on all servers configured by include/rpl_init.inc
- User can set $rpl_debug=1, which makes auxiliary replication files
print relevant debug info.
- Improved documentation for all auxiliary replication files. Now they
describe purpose, usage, parameters, and side effects.
- Many small code cleanups:
- Made have_innodb.inc output a sensible error message.
- Moved contents of rpl000017-slave.sh into rpl000017.test
- Added mysqltest variables that expose the current state of
disable_warnings/enable_warnings and friends.
- Too many to list here: see per-file comments for details.
Post-push fixes:
- fixed platform dependent result files
- appeasing valgrind warnings:
Fault injection was also uncovering a previously existing
potential mem leaks. For BUG#46166 testing purposes, fixed
by forcing handling the leak when injecting faults.
Manual merge from mysql-5.1-bugteam into mysql-5.5-bugteam.
Conflicts
=========
Text conflict in sql/log.cc
Text conflict in sql/log.h
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_priv.h
when generating new name.
If find_uniq_filename returns an error, then this error is not
being propagated upwards, and execution does not report error to
the user (although a entry in the error log is generated).
Additionally, some more errors were ignored in new_file_impl:
- when writing the rotate event
- when reopening the index and binary log file
This patch addresses this by propagating the error up in the
execution stack. Furthermore, when rotation of the binary log
fails, an incident event is written, because there may be a
chance that some changes for a given statement, were not properly
logged. For example, in SBR, LOAD DATA INFILE statement requires
more than one event to be logged, should rotation fail while
logging part of the LOAD DATA events, then the logged data would
become inconsistent with the data in the storage engine.
It is not necessary to support INSERT DELAYED for a single value insert,
while we do not support that for multi-values insert when binlog is
enabled in SBR.
The lock_type is upgrade to TL_WRITE from TL_WRITE_DELAYED for
INSERT DELAYED for single value insert as multi-values insert
did when binlog is enabled. Then it's safe. And binlog it as
INSERT without DELAYED.
When using BINLOG statement to execute rows log events, session variables
foreign_key_checks and unique_checks are changed temporarily. As each rows
log event has their own special session environment and its own
foreign_key_checks and unique_checks can be different from current session
which executing the BINLOG statement. But these variables are not restored
correctly after BINLOG statement. This problem will cause that the following
statements fail or generate unexpected data.
In this patch, code is added to backup and restore these two variables.
So BINLOG statement will not affect current session's variables again.
win x86 debug_max
The windows MTR run exhibited a different test execution
ordering (due to the fact that in these platforms MTR is invoked
with --parallel > 1). This uncovered a bug in the aforementioned
test case, which is triggered by the following conditions:
1. server is not restarted between two different tests;
2. the test before binlog.binlog_row_failure_mixing_engines
issues flush logs;
3. binlog.binlog_row_failure_mixing_engines uses binlog
positions to limit the output of show_binlog_events;
4. binlog.binlog_row_failure_mixing_engines does not state which
binlog file to use, thence it uses a wrong binlog file with
the correct position.
There are two possible fixes: 1. make sure that the test start
from a clean slate - binlog wise; 2. in addition to the position,
also state the binary log file before sourcing
show_binlog_events.inc .
We go for fix#1, ie, deploy a RESET MASTER before the test is
actually started.
After the WL#2687, the binlog_cache_size and max_binlog_cache_size affect both the
stmt-cache and the trx-cache. This means that the resource used is twice the amount
expected/defined by the user.
The binlog_cache_use is incremented when the stmt-cache or the trx-cache is used
and binlog_cache_disk_use is incremented when the disk space from the stmt-cache or the
trx-cache is used. This behavior does not allow to distinguish which cache may be harming
performance due to the extra disk accesses and needs to have its in-memory cache
increased.
To fix the problem, we introduced two new options and status variables related to the
stmt-cache:
Options:
. binlog_stmt_cache_size
. max_binlog_stmt_cache_size
Status Variables:
. binlog_stmt_cache_use
. binlog_stmt_cache_disk_use
So there are
. binlog_cache_size that defines the size of the transactional cache for
updates to transactional engines for the binary log.
. binlog_stmt_cache_size that defines the size of the statement cache for
updates to non-transactional engines for the binary log.
. max_binlog_cache_size that sets the total size of the transactional
cache.
. max_binlog_stmt_cache_size that sets the total size of the statement
cache.
. binlog_cache_use that identifies the number of transactions that used the
temporary transactional binary log cache.
. binlog_cache_disk_use that identifies the number of transactions that used
the temporary transactional binary log cache but that exceeded the value of
binlog_cache_size.
. binlog_stmt_cache_use that identifies the number of statements that used the
temporary non-transactional binary log cache.
. binlog_stmt_cache_disk_use that identifies the number of statements that used
the temporary non-transactional binary log cache but that exceeded the value of
binlog_stmt_cache_size.
There were actually more problems in this area:
Slaves (if any) were unconditionally restarted, this appears unnecessary.
Sort criteria were suboptimal, included the test name.
Added logic to "reserve" a sequence of tests with same config for one thread
Got rid of sort_criteria hash, put it into the test case itself
Adds little sanity check that expected worker picks up test
Fixed some tests that may fail if starting on running server
Some of these fail only if *same* test is repeated.
Finally, special sorting of tests that do --force-restart
The binlog_cache_use is incremented twice when changes to a transactional table
are committed, i.e. TC_LOG_BINLOG::log_xid calls is called. The problem happens
because log_xid calls both binlog_flush_stmt_cache and binlog_flush_trx_cache
without checking if such caches are empty thus unintentionally increasing the
binlog_cache_use value twice.
Although not explicitly mentioned in the bug, the binlog_cache_disk_use presents
the same problem.
The binlog_cache_use and binlog_cache_disk_use are status variables that are
incremented when transactional (i.e. trx-cache) or non-transactional (i.e.
stmt-cache) changes are committed. They are used to compute the ratio between
the use of disk and memory while gathering updates for a transaction.
The problem reported is fixed by avoiding incrementing the binlog_cache_use
and binlog_cache_disk_use if a cache is empty. We also have decided to increment
both variables when a cache is truncated as the cache is used although its
content is discarded and is not written to the binary log.
In this patch, we take the opportunity to re-organize the code around the
function binlog_flush_trx_cache and binlog_flush_stmt_cache.
The binlog_cache_use is incremented twice when changes to a transactional table
are committed, i.e. TC_LOG_BINLOG::log_xid calls is called. The problem happens
because log_xid calls both binlog_flush_stmt_cache and binlog_flush_trx_cache
without checking if such caches are empty thus unintentionally increasing the
binlog_cache_use value twice.
To fix the problem we avoided incrementing the binlog_cache_use if the cache is
empty. We also decided to increment binlog_cache_use when the cache is truncated
as the cache is used although its content is discarded and is not written to the
binary log.
Note that binlog_cache_use is incremented for both types of cache, transactional
and non-transactional and that the behavior presented in this patch also applies
to the binlog_cache_disk_use.
Finally, we re-organized the code around the functions binlog_flush_trx_cache and
binlog_flush_stmt_cache.
The lock_type is upgrade to TL_WRITE from TL_WRITE_DELAYED for
INSERT DELAYED when inserting multi values in one statement.
It's safe. But it causes an unsafe warning in SBR.
Make INSERT DELAYED safe by logging it as INSERT without DELAYED.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
