sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
rw_lock_x_lock_func(): Assert that the thread is not already holding
the lock in a conflicting mode (RW_LOCK_SHARED).
rw_lock_s_lock_func(): Assert that the thread is not already holding
the lock in a conflicting mode (RW_LOCK_EX).
Bug 12980094 - ASSERTION IN INNODB DETECTED IN RQG_PARTITION_DDL
Bug 13034534 - RQG TESTS FAIL ON WINDOWS WITH CRASH NEAR RW_LOCK_DEBUG_PRINT
All access to struct rw_lock_debug_struct must be protected by rw_lock_debug_mutex_enter().
Replace part of the patch that Kevin apparently forgot to push.
Fix the bug also in the built-in InnoDB of MySQL 5.1.
I cannot explain why the test case was not failing without the
full patch.
This was rb:762, approved by me.
The problem occurred when indexes are added between the time that an
UNDO record is created and the time that the purge thread comes around
and deletes the old secondary index entries. The purge thread would
hit an assert when trying to build a secondary index entry for
searching. The problem was that the old value of those fields were not
in the UNDO record since they were not part of an index when the UPDATE
occured.
A test case was added to innodb-index.test.
when buffered changes are to be discarded
ibuf_add_free_page(): Lower the latching order of the newly allocated page
to SYNC_IBUF_TREE_NODE_NEW after latching the insert buffer tree root.
This bug always was bogus UNIV_SYNC_DEBUG alarm. The function
buf_block_dbg_add_level() is a no-op unless UNIV_SYNC_DEBUG is defined.
Tweak the faulty UNIV_SYNC_DEBUG diagnostics a little bit more.
ibuf_add_free_page(): Lower the latching order of the newly allocated page
only after acquiring the ibuf_mutex.
This fix was accidentally pushed to mysql-5.1 after the 5.1.59 clone-off in
bzr revision id marko.makela@oracle.com-20110829081642-z0w992a0mrc62s6w
with the fix of Bug#12704861 Corruption after a crash during BLOB update
but not merged to mysql-5.5 and upwards.
In the Barracuda formats, the clustered index record no longer
contains a prefix of off-page columns. Because of this, the undo log
must contain these prefixes, so that purge and multi-versioning will
continue to work. However, this also means that an undo log record can
become too big to fit in an undo log page. (It is a limitation of the
undo log that undo records cannot span across multiple pages.)
In case the checks for undo log size fail when CREATE TABLE or CREATE
INDEX is executed, we need a fallback that blocks a modification
operation when the undo log record would exceed the maximum size.
trx_undo_free_last_page_func(): Renamed from trx_undo_free_page_in_rollback().
Define the trx_t parameter only in debug builds.
trx_undo_free_last_page(): Wrapper for trx_undo_free_last_page_func().
Pass the trx_t parameter only in debug builds.
trx_undo_truncate_end_func(): Renamed from trx_undo_truncate_end().
Define the trx_t parameter only in debug builds. Rewrite a for(;;) loop
as a while loop for clarity.
trx_undo_truncate_end(): Wrapper for from trx_undo_truncate_end_func().
Pass the trx_t parameter only in debug builds.
trx_undo_erase_page_end(): Return TRUE if the page was non-empty
to begin with. Refuse to erase empty pages.
trx_undo_report_row_operation(): If the page for which the undo log
was too big was empty, free the undo page and return DB_TOO_BIG_RECORD.
rb:749 approved by Inaam Rana
The fix of Bug#12612184 broke crash recovery. When a record that
contains off-page columns (BLOBs) is updated, we must first write redo
log about the BLOB page writes, and only after that write the redo log
about the B-tree changes. The buggy fix would log the B-tree changes
first, meaning that after recovery, we could end up having a record
that contains a null BLOB pointer.
Because we will be redo logging the writes off the off-page columns
before the B-tree changes, we must make sure that the pages chosen for
the off-page columns are free both before and after the B-tree
changes. In this way, the worst thing that can happen in crash
recovery is that the BLOBs are written to free pages, but the B-tree
changes are not applied. The BLOB pages would correctly remain free in
this case. To achieve this, we must allocate the BLOB pages in the
mini-transaction of the B-tree operation. A further quirk is that BLOB
pages are allocated from the same file segment as leaf pages. Because
of this, we must temporarily "hide" any leaf pages that were freed
during the B-tree operation by "fake allocating" them prior to writing
the BLOBs, and freeing them again before the mtr_commit() of the
B-tree operation, in btr_mark_freed_leaves().
btr_cur_mtr_commit_and_start(): Remove this faulty function that was
introduced in the Bug#12612184 fix. The problem that this function was
trying to address was that when we did mtr_commit() the BLOB writes
before the mtr_commit() of the update, the new BLOB pages could have
overwritten clustered index B-tree leaf pages that were freed during
the update. If recovery applied the redo log of the BLOB writes but
did not see the log of the record update, the index tree would be
corrupted. The correct solution is to make the freed clustered index
pages unavailable to the BLOB allocation. This function is also a
likely culprit of InnoDB hangs that were observed when testing the
Bug#12612184 fix.
btr_mark_freed_leaves(): Mark all freed clustered index leaf pages of
a mini-transaction allocated (nonfree=TRUE) before storing the BLOBs,
or freed (nonfree=FALSE) before committing the mini-transaction.
btr_freed_leaves_validate(): A debug function for checking that all
clustered index leaf pages that have been marked free in the
mini-transaction are consistent (have not been zeroed out).
btr_page_alloc_low(): Refactored from btr_page_alloc(). Return the
number of the allocated page, or FIL_NULL if out of space. Add the
parameter "mtr_t* init_mtr" for specifying the mini-transaction where
the page should be initialized, or if this is a "fake allocation"
(init_mtr=NULL) by btr_mark_freed_leaves(nonfree=TRUE).
btr_page_alloc(): Add the parameter init_mtr, allowing the page to be
initialized and X-latched in a different mini-transaction than the one
that is used for the allocation. Invoke btr_page_alloc_low(). If a
clustered index leaf page was previously freed in mtr, remove it from
the memo of previously freed pages.
btr_page_free(): Assert that the page is a B-tree page and it has been
X-latched by the mini-transaction. If the freed page was a leaf page
of a clustered index, link it by a MTR_MEMO_FREE_CLUST_LEAF marker to
the mini-transaction.
btr_store_big_rec_extern_fields_func(): Add the parameter alloc_mtr,
which is NULL (old behaviour in inserts) and the same as local_mtr in
updates. If alloc_mtr!=NULL, the BLOB pages will be allocated from it
instead of the mini-transaction that is used for writing the BLOBs.
fsp_alloc_from_free_frag(): Refactored from
fsp_alloc_free_page(). Allocate the specified page from a partially
free extent.
fseg_alloc_free_page_low(), fseg_alloc_free_page_general(): Add the
parameter "mtr_t* init_mtr" for specifying the mini-transaction where
the page should be initialized, or NULL if this is a "fake allocation"
that prevents the reuse of a previously freed B-tree page for BLOB
storage. If init_mtr==NULL, try harder to reallocate the specified page
and assert that it succeeded.
fsp_alloc_free_page(): Add the parameter "mtr_t* init_mtr" for
specifying the mini-transaction where the page should be initialized.
Do not allow init_mtr == NULL, because this function is never to be
used for "fake allocations".
mtr_t: Add the operation MTR_MEMO_FREE_CLUST_LEAF and the flag
mtr->freed_clust_leaf for quickly determining if any
MTR_MEMO_FREE_CLUST_LEAF operations have been posted.
row_ins_index_entry_low(): When columns are being made off-page in
insert-by-update, invoke btr_mark_freed_leaves(nonfree=TRUE) and pass
the mini-transaction as the alloc_mtr to
btr_store_big_rec_extern_fields(). Finally, invoke
btr_mark_freed_leaves(nonfree=FALSE) to avoid leaking pages.
row_build(): Correct a comment, and add a debug assertion that a
record that contains NULL BLOB pointers must be a fresh insert.
row_upd_clust_rec(): When columns are being moved off-page, invoke
btr_mark_freed_leaves(nonfree=TRUE) and pass the mini-transaction as
the alloc_mtr to btr_store_big_rec_extern_fields(). Finally, invoke
btr_mark_freed_leaves(nonfree=FALSE) to avoid leaking pages.
buf_reset_check_index_page_at_flush(): Remove. The function
fsp_init_file_page_low() already sets
bpage->check_index_page_at_flush=FALSE.
There is a known issue in tablespace extension. If the request to
allocate a BLOB page leads to the tablespace being extended, crash
recovery could see BLOB writes to pages that are off the tablespace
file bounds. This should trigger an assertion failure in fil_io() at
crash recovery. The safe thing would be to write redo log about the
tablespace extension to the mini-transaction of the BLOB write, not to
the mini-transaction of the record update. However, there is no redo
log record for file extension in the current redo log format.
rb:693 approved by Sunny Bains
Also addressed issues in bug #11745133, where we could mark a table
corrupted instead of crashing the server when found a corrupted buffer/page
if the table created with innodb_file_per_table on.
row_sel_field_store_in_mysql_format(): Do not pad the unused part of
the buffer reserved for a True VARCHAR column (introduced in 5.0.3).
Add Valgrind instrumentation ensuring that the unused part will be
flagged uninitialized.
row_sel_copy_cached_field_for_mysql(): New function: Copy a field
that is in the MySQL row format, not copying the unused tail of
VARCHAR columns.
row_sel_pop_cached_row_for_mysql(): Invoke
row_sel_copy_cached_field_for_mysql() for copying fields.
When the row is long, copy it field-by-field.
rb:715 approved by Inaam Rana
Bug#12637786 was fixed with rb:692 by marko. But that fix has a remaining
bug. It added this assert;
ut_ad(ind_field->prefix_len);
before a section of code that assumes there is a prefix_len.
The patch replaced code that explicitly avoided this with a check for
prefix_len. It turns out that the purge thread can get to that assert
without a prefix_len because it does not use a row_ext_t* .
When UNIV_DEBUG is not defined, the affect of this is that the purge thread
sets the dfield->len to zero and then cannot find the entry in the index to
purge. So secondary index entries remain unpurged.
This patch does not do the assert. Instead, it uses
'if (ind_field->prefix_len) {...}'
around the section of code that assumes a prefix_len. This is the way the
patch I provided to Marko did it.
The test case is simply modified to do a sleep(10) in order to give the
purge thread a chance to run. Without the code change to row0row.c, this
modified testcase will assert if InnoDB was compiled with UNIV_DEBUG.
I tried to sleep(5), but it did not always assert.
GCC 4.6 has new -Wunused-but-set-variable flag, which is enabled
by -Wall, that causes GCC to emit a warning whenever a local variable
is assigned to, but otherwise unused (aside from its declaration).
Since the maintainer mode uses -Wall and -Werror, source code which
triggers these warnings will be rejected. That is, these warnings
become hard errors.
The solution is to fix the code which triggers these specific warnings.
In most of the cases, this is a welcome cleanup as code which triggers
this warning is probably dead anyway.
dbug/dbug.c:
Unused but set.
libmysqld/lib_sql.cc:
Length is not necessary as the converted error message is always
null-terminated.
sql/item_func.cc:
Make get_var_with_binlog private to this compilation unit.
If a error was raised, do not attempt to evaluate the user
variable as the statement execution will be interrupted
anyway.
sql/mysqld.cc:
Use a void expression to silence the warning. Avoids the use of
macros that would make the code more unreadable than it already is.
sql/protocol.cc:
Length is not necessary as the converted error message is always
null-terminated. Remove unnecessary casts and assignment.
sql/sql_class.h:
Function is only used in a single compilation unit.
sql/sql_load.cc:
Only use the variable outside of EMBEDDED_LIBRARY.
storage/innobase/btr/btr0cur.c:
Do not retrieve field, only the record length is being used.
storage/perfschema/pfs.cc:
Use a void expression to silence the warning.
tests/mysql_client_test.c:
Unused but set.
unittest/mysys/lf-t.c:
Unused but set.
Some ut_a(!rec_offs_any_null_extern()) assertion failures are indicating
genuine BLOB bugs, others are bogus failures when rolling back incomplete
transactions at crash recovery. This needs more work, and until I get a
chance to work on it, other testing must not be disrupted by this.
The patch replaces the use of the POSIX I/O interfaces in mysys on Windows with
the Win32 API calls (CreateFile, WriteFile, etc). The Windows HANDLE for the open
file is stored in the my_file_info struct, along with a flag for append mode
(because the Windows API does not support opening files in append mode in all cases)
The default max open files has been increased to 16384 and can be increased further
by setting --max-open-files=<value> during the server start.
Noteworthy benefit of this patch is that it removes limits from the table_cache size -
allowing for more simultaneus users
