In certain situations, a scan of the table will return the error
code HA_ERR_RECORD_DELETED, and this error code is not
correctly caught in the Rows_log_event::find_row() function, which
causes an error to be returned for this case.
This patch fixes the problem by adding code to either ignore the
record and continuing with the next one, the the event of a table
scan, or change the error code to HA_ERR_KEY_NOT_FOUND, in the event
that a key lookup is attempted.
ha_statistic_increment for rpl_temporary
Problem: in some cases master send a special event to reconnecting
slave to keep slave's temporary tables (see #17284) and they still
have references to the "old" SQL slave thread and use them to access
thread's data.
Fix: set temporary tables thread references to the actual SQL slave
thread in such cases.
The Blackhole engine did not support row-based replication
since the delete_row(), update_row(), and the index and range
searching functions were not implemented.
This patch adds row-based replication support for the
Blackhole engine by implementing the two functions mentioned
above, and making the engine pretend that it has found the
correct row to delete or update when executed from the slave
SQL thread by implementing index and range searching functions.
It is necessary to only pretend this for the SQL thread, since
a SELECT executed on the Blackhole engine will otherwise never
return EOF, causing a livelock.
In order to improve the performance when replicating to partitioned
myisam tables with row-based format, the number of rows of current
rows log event is estimated and used to setup storage engine for bulk
inserts.
The replication filtering rules were inappropiately applied when
executing BINLOG pseudo-query. The rules are supposed to be active
only at times when the slave's sql thread executes an event.
Fixed with correcting a condition to call replication rules only if
the slave sql thread executes the event.
- Implementing --base64-format=decode-rows, to display
SQL-alike decoded row events without their BINLOG statements.
- Adding --base64-format=decode-rows into tests when
calling mysqlbinlog to avoid non-deterministic results
- Removing resetting of last_table_id in "RESET MASTER",
which appeared to be dangerous.
Implementing -v command line parameter to mysqlbinlog
to decode and print row events.
mysql-test/include/mysqlbinlog_row_engine.inc
mysql-test/r/mysqlbinlog_row.result
mysql-test/r/mysqlbinlog_row_big.result
mysql-test/r/mysqlbinlog_row_innodb.result
mysql-test/r/mysqlbinlog_row_myisam.result
mysql-test/r/mysqlbinlog_row_trans.result
mysql-test/t/mysqlbinlog_row.test
mysql-test/t/mysqlbinlog_row_big.test
mysql-test/t/mysqlbinlog_row_innodb.test
mysql-test/t/mysqlbinlog_row_myisam.test
mysql-test/t/mysqlbinlog_row_trans.test
Adding tests
client/Makefile.am
Adding new files to symlink
client/mysqlbinlog.cc
Adding -v option
sql/log_event.cc
Impelentations of the new methods
sql/log_event.h
Declaration of the new methods and member
sql/mysql_priv.h
Adding new function prototype
sql/rpl_tblmap.cc
Adding pre-processor conditions
sql/rpl_tblmap.h
Adding pre-processor conditions
sql/rpl_utility.h
Adding pre-processor conditions
sql/sql_base.cc
Adding reset_table_id_sequence() function.
sql/sql_repl.cc
Resetting table_id on "RESET MASTER"
.bzrignore
Ignoring new symlinked files
On certain kinds of errors (e.g., out of stack), a call to Item_func_
set_user_var::fix_fields() might fail. Since the return value of this
call was not checked inside User_var_log_event::exec_event(), continuing
execution after this will cause a crash inside Item_func_set_user_var::
update_hash().
The bug is fixed by aborting execution of the event with an error if
fix_fields() fails, since it is not possible to continue execution anyway.
When flushing tables, there were a slight chance that the flush was occuring
between processing of two table map events. Since the tables are opened
one by one, it might result in that the tables were not valid and that sub-
sequent locking of tables would cause the slave to crash.
The problem is solved by opening and locking all tables at once using
simple_open_n_lock_tables(). Also, the patch contain a change to open_tables()
so that pre-locking only takes place when the trg_event_map is not zero, which
was not the case before (this caused the lock to be placed in thd->locked_tables
instead of thd->lock since the assumption was that triggers would be called
later and therefore the tables should be pre-locked).
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
Problem: in mixed and statement mode, a query that refers to a
system variable will use the slave's value when replayed on
slave. So if the value of a system variable is inserted into a
table, the slave will differ from the master.
Fix: mark statements that refer to a system variable as "unsafe",
meaning they will be replicated by row in mixed mode and produce a warning
in statement mode. There are some exceptions: some variables are actually
replicated. Those should *not* be marked as unsafe.
BUG#34732: mysqlbinlog does not print default values for auto_increment variables
Problem: mysqlbinlog does not print default values for some variables,
including auto_increment_increment and others. So if a client executing
the output of mysqlbinlog has different default values, replication will
be wrong.
Fix: Always print default values for all variables that are replicated.
I need to fix the two bugs at the same time, because the test cases would
fail if I only fixed one of them.
There was a failure in that show slave status displayed a wrong message
when slave stopped at processing a row event inserting to a default-less
column.
The problem seem to have ceased after recent fixes in rbr code.
However, the test was not updated to carry testing of the case commented-out.
Uncommenting and editing the test.
Notice, Bug#23907 is most probably a duplicate of this one.
Rename client_last_error to last_error and client_last_errno to last_errno
to not break connectors which use the internal net structure for error handling.
log-slave-updates and circul repl
Slave SQL thread may execute one extra event when there are events
skipped by slave I/O thread (e.g. originated by the same server).
Whereas it was requested not to do so by the UNTIL condition.
This happens because we compare with the end position of previously
executed event. This is fine when there are no skipped by slave I/O
thread events, as end position of previous event equals to start
position of to be executed event. Otherwise this position equals to
start position of skipped event.
This is fixed by:
- reading the event to be executed before checking if the until condition
is satisfied.
- comparing the start position of the event to be executed. Since we do
not have the start position available, we compute it by subtracting
event length from end position (which is available).
- if there are no events on the event queue at the slave sql starting
time, that meet until condition, we stop immediately, as in this
case we do not want to wait for next event.
a SELECT doesn't cause ROLLBACK of statem".
The idea of the fix is to ensure that we always commit the current
statement at the end of dispatch_command(). In order to not issue
redundant disc syncs, an optimization of the two-phase commit
protocol is implemented to bypass the two phase commit if
the transaction is read-only.
The error message due to lack of the default value for an extra field
was not as informative as it should be.
Fixed with improving the scheme of gathering, propagating and reporting
errors in applying rows events.
The scheme is in the following.
Any kind of error of processing of a row event incidents are to be
registered with my_error().
In the end Rows_log_event::do_apply_event() invokes rli->report() with the
message to display consisting of all the errors.
This mimics `show warnings' displaying.
A simple test checks three errors in processing an event.
Two hunks - a user level error and pushing it into the list -
have been devoted to already fixed Bug@31702.
Some open issues relating to this artifact listed on BUG@21842 page and
on WL@3679.
Todo: to synchronize the statement in the tests comments on Update and Delete
events may not stop when an extra field does not have a default with wl@3228 spec.
Main problem: mysql 5.1 cannot read binlogs from 4.1.
Subproblem 1: There is a mistake in sql_ex_info::init. The read_str()
function updates its first argument to point to the next character to
read. However, it is applied only to a copy of the buffer pointer, so the
real buffer pointer is not updated.
Fix 1: do not take a copy of the buffer pointer. The copy was needed
because sql_ex_info::init does not use the const attribute on some of its
arguments. So we add the const attribute, too.
Subproblem 2: The first BINLOG statement is asserted to be a
FORMAT_DESCRIPTION_LOG_EVENT, but 4.1 binlogs begin with START_EVENT_V3.
Fix 2: allow START_EVENT_V3 too.
Problem: When slave reads format_description_log_event, it checks if the
master is a version that uses an old binlog format. See also BUG#27779.
Not all possible server_versions were listed.
Fix: Check for all server_versions which use the old binlog_format.
Problem: Replication fails when master is mysql-5.1-wl2325-5.0-drop6 and
slave is mysql-5.1-new-rpl. The reason is that, in
mysql-5.1-wl2325-5.0-drop6, the event type id's were different than in
mysql-5.1-new-rpl.
Fix (in mysql-5.1-new-rpl):
(1) detect that the server that generated the events uses the old
format, by checking the server version of the format_description_log_event
This patch recognizes mysql-5.1-wl2325-5.0-drop6p13-alpha,
mysql-5.1-wl2325-5.0-drop6, mysql-5.1-wl2325-5.0, mysql-5.1-wl2325-no-dd.
(2) if the generating server is old, map old event types to new event
types using a permutation array.
I've also added a test case which reads binlogs for four different
versions.
Now, every transaction (including autocommit transactions) start with
a BEGIN and end with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
