(Removes some warnings about UNIX_TIMESTAMP from the slave.err logs)
Marked federated_server as a '--big-test'
Change error in net_clear to 'Note', as it interfered with mysql-test-run.
skipped):
By moving statement end actions from Rows_log_event::do_apply_event() to
Rows_log_event::do_update_pos() they will always be executed, even if
Rows_log_event::do_apply_event() is skipped because the event originated
at the same server. This because Rows_log_event::do_update_pos() is always
executed (unless Rows_log_event::do_apply_event() failed with an error,
in which case the slave stops with an error anyway).
Adding test case.
Fixing logic to detect if inside a group. If a rotate event occured
when an initial prefix of events for a statement, but for which the
table did contain a key, last_event_start_time is set to zero, causing
rotate to end the group but without unlocking any tables. This left a
lock hanging around, which subsequently triggered an assertion when a
second attempt was made to lock the same sequence of tables.
In order to solve the above problem, a new flag was added to the relay
log info structure that is used to indicate that the replication thread
is currently executing a statement. Using this flag, the replication
thread is in a group if it is either in a statement or inside a trans-
action.
The patch also eliminates some gratuitous header file inclusions that
were not needed (and caused compile errors) and replaced them with
forward definitions.
- Add MASTER_SSL_VERIFY_SERVER_CERT option to CHANGE MASTER TO
- Add Master_Ssl_Serify_Server_Cert to SHOW SLAVE STATUS
- Save and restore ssl_verify_server_cert to master info file
setting it to disabled as default.
Problem: to handle a situation when the size of event on the master is greater than max_allowed_packet on slave, we checked for the wrong constant (ER_NET_PACKET_TOO_LARGE instead of CR_NET_PACKET_TOO_LARGE).
Solution: test for the client "packet too large" error code instead of the server one in slave I/O thread.
This changeset adds replication of events and user-defined functions.
There are several bug reports involved in this change:
BUG#16421, BUG#17857, BUG#20384:
This patch modifies the mysql.events table to permit the addition of
another enum value for the status column. The column now has values
of ('DISABLED','SLAVESIDE_DISABLED','ENABLED'). A status of
SLAVESIDE_DISABLED is set on the slave during replication of events.
This enables users to determine which events werereplicated from the
master and to later enable them if they promote the slave to a master.
The CREATE, ALTER, and DROP statements are binlogged.
A new test was added for replication of events (rpl_events).
BUG#17671:
This patch modifies the code to permit logging of user-defined functions.
Note: this is the CREATE FUNCTION ... SONAME variety. A more friendly error
message to be displayed should a replicated user-defined function not be
found in the loadable library or if the library is missing from the
slave.The CREATE andDROP statements are binlogged. A new test was added
for replication of user-defined functions (rpl_udf).
The patch also adds a new column to the mysql.event table named
'originator' that is used to store the server_id of the server that
the event originated on. This enables users to promote a slave to a
master and later return the promoted slave to a slave and disable the
replicated events.
"INSERT... ON DUPLICATE KEY UPDATE skips auto_increment values"
didn't make it into 5.0.36 and 5.1.16,
so we need to adjust the bug-detection-based-on-version-number code.
Because the rpl tree has a too old version, rpl_insert_id cannot pass,
so I disable it (like is already the case in 5.1-rpl for the same reason),
and the repl team will re-enable it when they merge 5.0 and 5.1 into
their trees (thus getting the right version number).
Fixed compile-pentium64 scripts
Fixed wrong estimate of update_with_key_prefix in sql-bench
Merge bk-internal.mysql.com:/home/bk/mysql-5.1 into mysql.com:/home/my/mysql-5.1
Fixed unsafe define of uint4korr()
Fixed that --extern works with mysql-test-run.pl
Small trivial cleanups
This also fixes a bug in counting number of rows that are updated when we have many simultanous queries
Move all connection handling and command exectuion main loop from sql_parse.cc to sql_connection.cc
Split handle_one_connection() into reusable sub functions.
Split create_new_thread() into reusable sub functions.
Added thread_scheduler; Preliminary interface code for future thread_handling code.
Use 'my_thread_id' for internal thread id's
Make thr_alarm_kill() to depend on thread_id instead of thread
Make thr_abort_locks_for_thread() depend on thread_id instead of thread
In store_globals(), set my_thread_var->id to be thd->thread_id.
Use my_thread_var->id as basis for my_thread_name()
The above changes makes the connection we have between THD and threads more soft.
Added a lot of DBUG_PRINT() and DBUG_ASSERT() functions
Fixed compiler warnings
Fixed core dumps when running with --debug
Removed setting of signal masks (was never used)
Made event code call pthread_exit() (portability fix)
Fixed that event code doesn't call DBUG_xxx functions before my_thread_init() is called.
Made handling of thread_id and thd->variables.pseudo_thread_id uniform.
Removed one common 'not freed memory' warning from mysqltest
Fixed a couple of usage of not initialized warnings (unlikely cases)
Suppress compiler warnings from bdb and (for the moment) warnings from ndb
1)
BUG#25507 "multi-row insert delayed + auto increment causes
duplicate key entries on slave" (two concurrrent connections doing
multi-row INSERT DELAYED to insert into an auto_increment column,
caused replication slave to stop with "duplicate key error" (and
binlog was wrong), and BUG#26116 "If multi-row INSERT
DELAYED has errors, statement-based binlogging breaks" (the binlog
was not accounting for all rows inserted, or slave could stop).
The fix is that: in statement-based binlogging, a multi-row INSERT
DELAYED is silently converted to a non-delayed INSERT.
This is supposed to not affect many 5.1 users as in 5.1, the default
binlog format is "mixed", which does not have the bug (the bug is
only with binlog_format=STATEMENT).
We should document how the system delayed_insert thread decides of
its binlog format (which is not modified by this patch):
this decision is taken when the thread is created
and holds until it is terminated (is not affected by any later change
via SET GLOBAL BINLOG_FORMAT). It is also not affected by the binlog
format of the connection which issues INSERT DELAYED (this binlog
format does not affect how the row will be binlogged).
If one wants to change the binlog format of its server with SET
GLOBAL BINLOG_FORMAT, it should do FLUSH TABLES to be sure all
delayed_insert threads terminate and thus new threads are created,
taking into account the new format.
2)
BUG#24432
"INSERT... ON DUPLICATE KEY UPDATE skips auto_increment values".
When in an INSERT ON DUPLICATE KEY UPDATE, using
an autoincrement column, we inserted some autogenerated values and
also updated some rows, some autogenerated values were not used
(for example, even if 10 was the largest autoinc value in the table
at the start of the statement, 12 could be the first autogenerated
value inserted by the statement, instead of 11). One autogenerated
value was lost per updated row. Led to exhausting the range of the
autoincrement column faster.
Bug introduced by fix of BUG#20188; present since 5.0.24 and 5.1.12.
This bug breaks replication from a pre-5.0.24/pre-5.1.12 master.
But the present bugfix, as it makes INSERT ON DUP KEY UPDATE
behave like pre-5.0.24/pre-5.1.12, breaks replication from a
[5.0.24,5.0.34]/[5.1.12,5.1.15]
master to a fixed (5.0.36/5.1.16) slave! To warn users against this when
they upgrade their slave, as agreed with the support team, we add
code for a fixed slave to detect that it is connected to a buggy
master in a situation (INSERT ON DUP KEY UPDATE into autoinc column)
likely to break replication, in which case it cannot replicate so
stops and prints a message to the slave's error log and to SHOW SLAVE
STATUS.
For 5.0.36->[5.0.24,5.0.34] replication or 5.1.16->[5.1.12,5.1.15]
replication we cannot warn as master
does not know the slave's version (but we always recommended to users
to have slave at least as new as master).
As agreed with support, I have asked for an alert to be put into
the MySQL Network Monitoring and Advisory Service.
3) note that I'll re-enable rpl_insert_id as soon as 5.1-rpl gets
the changes from the main 5.1.
"INSERT... ON DUPLICATE KEY UPDATE skips auto_increment values".
When in an INSERT ON DUPLICATE KEY UPDATE, using
an autoincrement column, we inserted some autogenerated values and
also updated some rows, some autogenerated values were not used
(for example, even if 10 was the largest autoinc value in the table
at the start of the statement, 12 could be the first autogenerated
value inserted by the statement, instead of 11). One autogenerated
value was lost per updated row. Led to exhausting the range of the
autoincrement column faster.
Bug introduced by fix of BUG#20188; present since 5.0.24 and 5.1.12.
This bug breaks replication from a pre-5.0.24 master.
But the present bugfix, as it makes INSERT ON DUP KEY UPDATE
behave like pre-5.0.24, breaks replication from a [5.0.24,5.0.34]
master to a fixed (5.0.36) slave! To warn users against this when
they upgrade their slave, as agreed with the support team, we add
code for a fixed slave to detect that it is connected to a buggy
master in a situation (INSERT ON DUP KEY UPDATE into autoinc column)
likely to break replication, in which case it cannot replicate so
stops and prints a message to the slave's error log and to SHOW SLAVE
STATUS.
For 5.0.36->[5.0.24,5.0.34] replication we cannot warn as master
does not know the slave's version (but we always recommended to users
to have slave at least as new as master).
As agreed with support, I'll also ask for an alert to be put into
the MySQL Network Monitoring and Advisory Service.
