- Remove the "hack" from mtr.pl that skipped searching for the .dll files
when embedded and windows. Now the variables will be preoperly initialized.
- Make the tests detect that they can't run on windows+embedded
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
All statements executed by mysql_upgrade are binlogged and then are replicated to slave.
This will result in some errors. The report of this bug has demonstrated some examples.
Master and slave should be upgraded separately. All statements executed by
mysql_upgrade will not be binlogged.
--write-binlog and --skip-write-binlog options are added into mysql_upgrade.
These options control whether sql statements are binlogged or not.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
Problem was that the partition containing NULL values
was pruned away, since '2001-01-01' < '2001-02-00' but
TO_DAYS('2001-02-00') is NULL.
Added the NULL partition for RANGE/LIST partitioning on TO_DAYS()
function to be scanned too.
Also fixed a bug that added ALLOW_INVALID_DATES to sql_mode
(SELECT * FROM t WHERE date_col < '1999-99-99' on a RANGE/LIST
partitioned table would add it).
Replication SQL thread does not set database default charset to
thd->variables.collation_database properly, when executing LOAD DATA binlog.
This bug can be repeated by using "LOAD DATA" command in STATEMENT mode.
This patch adds code to find the default character set of the current database
then assign it to thd->db_charset when slave server begins to execute a relay log.
The test of this bug is added into rpl_loaddata_charset.test
Install procedure does not copy *.inc files located under the mysql-test/t directory.
Therefore, this patch moves the rpl_trigger.inc to the mysql-test/include directory.
1. BUG#21704 - Renaming column does not update FK definition
2. Changes in mysql-test/include/mtr_warnings.sql so that the testcase
for BUG#21704 doesn't fail because of the warnings generated.
Detailed revision comments:
r5488 | vasil | 2009-07-09 19:16:44 +0300 (Thu, 09 Jul 2009) | 13 lines
branches/5.1:
Fix Bug#21704 Renaming column does not update FK definition
by checking whether a column that participates in a FK definition is being
renamed and denying the ALTER in this case.
The patch was originally developed by Davi Arnaut <Davi.Arnaut@Sun.COM>:
http://lists.mysql.com/commits/77714
and was later adjusted to conform to InnoDB coding style by me (Vasil),
I also added some more comments and moved the bug specific mysql-test to
a separate file to make it more manageable and flexible.
use partial primary key if another index can prevent filesort
The fix for bug #28404 causes the covering ordering indexes to be
preferred unconditionally over non-covering and ref indexes.
Fixed by comparing the cost of using a covering index to the cost of
using a ref index even for covering ordering indexes.
Added an assertion to clarify the condition the local variables should
be in.
The test case added failed sporadically on PB. This is due to the
fact that the user thread in some cases is waiting for slave IO
to stop and then check the error number. Thence, sometimes the
user thread would race for the error number with IO thread.
This post push fix addresses this by replacing the wait for slave
io to stop with a wait for slave io error (as it seems it was
added in 6.0 also after patch on which this is based was
pushed). This implied backporting wait_for_slave_io_error.inc
from 6.0 also.
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
the thread->mysys_var parameter should be empty for the idle
embedded-server threads so that working threads can safely free
this memory.
per-file comments:
libmysqld/lib_sql.cc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
set thread->mysys_var= 0 after the query is handled
mysql-test/include/concurrent.inc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
enable these for the embedded-server mode
sql/sql_show.cc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
show thread lock status in the query result
HAVING
When calculating GROUP BY the server caches some expressions. It does
that by allocating a string slot (Item_copy_string) and assigning the
value of the expression to it. This effectively means that the result
type of the expression can be changed from whatever it was to a string.
As this substitution takes place after the compile-time result type
calculation for IN but before the run-time type calculations,
it causes the type calculations in the IN function done at run time
to get unexpected results different from what was prepared at compile time.
In the CASE ... WHEN ... THEN ... statement there was a similar problem
and it was solved by artificially adding a STRING argument to the set of
types of the IN/CASE arguments at compile time, so if any of the
arguments of the CASE function changes its type to a string it will
still be covered by the information prepared at compile time.
Created new .test file - mysqldump_restore that does test restore from mysqldump
output for a limited number of basic cases.
Create new .inc file - mysqldump.inc - renames original table and uses mysqldump
output to recreate the table, then uses diff_tables.inc to compare the two tables.
Backported include/diff_tables.inc to facilitate this testing.
New patch incorporating review feedback prior to push.
mysqldump.test - removed redundant call to include/have_log_bin.inc (was used twice in the test!)
Created new .test file - mysqldump_restore that does this for a limited number
of basic cases.
Created new .inc file - mysqldump.inc - renames original table and uses mysqldump
output to recreate the table, then uses diff_tables.inc to compare the two tables.
Backported include/diff_tables.inc to facilitate this testing.
Details:
Most tests mentioned within the bug report were already fixed.
The test modified here failed in stability (high parallel load) tests.
Details:
1. Take care that disconnects are finished before the test terminates.
2. Correct wrong handling of send/reap in events_stress which caused
random garbled output
3. Minor beautifying of script code
SQL_SELECT::test_quick_select
The crash was caused by an incomplete cleanup of JOIN_TAB::select
during the filesort of rows for GROUP BY clause inside a subquery.
Queries where a quick index access is replaced with filesort was
was affected. For example:
SELECT 1 FROM
(SELECT COUNT(DISTINCT c1) FROM t1
WHERE c2 IN (1, 1) AND c3 = 2 GROUP BY c2) x
Quick index access related data in the SQL_SELECT::test_quick_select
function was inconsistent after an incomplete cleanup.
This function has been completed to prevent crashes in the
SQL_SELECT::test_quick_select function.
SQL_SELECT::test_quick_select
The crash was caused by an incomplete cleanup of JOIN_TAB::select
during the filesort of rows for GROUP BY clause inside a subquery.
Queries where a quick index access is replaced with filesort was
was affected. For example:
SELECT 1 FROM
(SELECT COUNT(DISTINCT c1) FROM t1
WHERE c2 IN (1, 1) AND c3 = 2 GROUP BY c2) x
Quick index access related data in the SQL_SELECT::test_quick_select
function was inconsistent after an incomplete cleanup.
This function has been completed to prevent crashes in the
SQL_SELECT::test_quick_select function.
