transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
This assertion could be triggered during execution of OPTIMIZE TABLE for
InnoDB tables. As part of optimize for InnoDB tables, the table is recreated
and then opened again. If the reopen failed for any reason, the assertion
would be triggered. This could for example be caused by a concurrent DROP
TABLE executed by a different connection. The reason for the assertion was
that any failures during reopening were ignored.
This patch fixes the problem by making sure that the result of reopening the
table is checked and that any error messages are sent to the client.
Test case added to innodb_mysql_sync.test.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
definition at engine
If a single ALTER TABLE contains both DROP INDEX and ADD INDEX using
the same index name (a.k.a. index modification) we need to disable
in-place alter table because we can't ask the storage engine to have
two copies of the index with the same name even temporarily (if we
first do the ADD INDEX and then DROP INDEX) and we can't modify
indexes that are needed by e.g. foreign keys if we first do
DROP INDEX and then ADD INDEX.
Fixed the problem by disabling in-place ALTER TABLE for these cases.
DDL no longer aborts mysql_lock_tables(), and hence
we no longer need to support need_reopen flag of this
call.
Remove the flag, and all the code in the server
that was responsible for handling the case when
it was set. This allowed to simplify:
open_and_lock_tables_derived(), the delayed thread,
multi-update.
Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH,
since we now only support this flag in open_table().
Rename MYSQL_LOCK_PERF_SCHEMA to MYSQL_LOCK_LOG_TABLE,
to avoid confusion.
Move the wait for the global read lock for cases
when we do updates in SELECT f1() or DO (UPDATE) to
open_table() from mysql_lock_tables(). When waiting
for the read lock, we could raise need_reopen flag,
which is no longer present in mysql_lock_tables().
Since the block responsible for waiting for GRL
was moved, MYSQL_LOCK_IGNORE_GLOBAL_READ_LOCK
was renamed to MYSQL_OPEN_IGNORE_GLOBAL_READ_LOCK.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/having.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in storage/federated/ha_federated.cc
for same data when using bit fields
Problem: checksum for BIT fields may be computed incorrectly
in some cases due to its storage peculiarity.
Fix: convert a BIT field to a string then calculate its checksum.
This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
causing crashes!
Adding a SPATIAL INDEX on a non-geometrical column caused a
segmentation fault when the table was subsequently
inserted into.
A test was added in mysql_prepare_create_table to explicitly
check whether non-geometrical columns are used in a
spatial index, and throw an error if so.
corruption and crash results
An index creation statement where the index key
is larger/wider than the column it references
should throw an error.
A statement like:
CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (A(255)))
did not error, but a segmentation fault followed when
an insertion was attempted on the table
The partial key validiation clause has been
restructured to (hopefully) better document which
uses of partial keys are valid.
This patch introduces timeouts for metadata locks.
The timeout is specified in seconds using the new dynamic system
variable "lock_wait_timeout" which has both GLOBAL and SESSION
scopes. Allowed values range from 1 to 31536000 seconds (= 1 year).
The default value is 1 year.
The new server parameter "lock-wait-timeout" can be used to set
the default value parameter upon server startup.
"lock_wait_timeout" applies to all statements that use metadata locks.
These include DML and DDL operations on tables, views, stored procedures
and stored functions. They also include LOCK TABLES, FLUSH TABLES WITH
READ LOCK and HANDLER statements.
The patch also changes thr_lock.c code (table data locks used by MyISAM
and other simplistic engines) to use the same system variable.
InnoDB row locks are unaffected.
One exception to the handling of the "lock_wait_timeout" variable
is delayed inserts. All delayed inserts are executed with a timeout
of 1 year regardless of the setting for the global variable. As the
connection issuing the delayed insert gets no notification of
delayed insert timeouts, we want to avoid unnecessary timeouts.
It's important to note that the timeout value is used for each lock
acquired and that one statement can take more than one lock.
A statement can therefore block for longer than the lock_wait_timeout
value before reporting a timeout error. When lock timeout occurs,
ER_LOCK_WAIT_TIMEOUT is reported.
Test case added to lock_multi.test.
Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
and the innodb monitor thread has no binding to that thd object. This cause
the crash because of bad derefencing.
Solution was to add a new macro which take the thd as an argument (which the innodb
thread uses for the call).
(Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
moved test to suite parts.)
Change the error code for ER_WARN_I_S_SKIPPED_TABLE, to not
upset the tests that rely on ER_SLAVE_CONVERSION_ERROR error
code = 1667.
Fix a merge bug with binlogging of CREATE TABLE (temporary tables).
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Removed local variables which became unused when we
have switched to new approach for CREATE TABLE LIKE
(i.e. abondoned .FRM file copying) and were causing
warnings during compilation.
m_tickets.front() == m_trans_sentinel'".
Debug build of server crashed due to assert failure in MDL
subsystem when one tried to execute multi-table REPAIR or
OPTIMIZE in autocommit=0 mode.
The assert failure occured when multi-table REPAIR or OPTIMIZE
started processing of second table from its table list and
tried to acquire upgradable metadata lock on this table.
The cause of the assert failure were MDL locks left over from
processing of previous table. It turned out that in autocommit=0
mode close_thread_tables() which happens at the end of table
processing doesn't release metadata locks.
This fix solves problem by releasing locks explicitly using
MDL_context::release_trans_locks() call.
There was two problems:
The first was the symptom, caused by bad error handling in
ha_partition. It did not handle print_error etc. when
having no partitions (when used by dummy handler).
The second was the real problem that when dropping tables
it reused the table type (storage engine) from when the lock
was asked for, not the table type that it had when gaining
the exclusive name lock. So that it tried to delete tables
from wrong storage engines.
Solutions for the first problem was to accept some handler
calls to the partitioning handler even if it was not setup
with any partitions, and also if possible fallback
to use the base handler's default functions.
Solution for the second problem was to remove the optimization
to reuse the definition from the cache, instead always check
the frm-file when holding the LOCK_open mutex
(updated with a fix for a debug print crash and better
comments as required by reviewer, and removed optimization
to avoid reading the frm-file).
Add a wait-for graph based deadlock detector to the
MDL subsystem.
Fixes bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock" and
bug #37346 "innodb does not detect deadlock between update and
alter table".
The first bug manifested itself as an unwarranted abort of a
transaction with ER_LOCK_DEADLOCK error by a concurrent ALTER
statement, when this transaction tried to repeat use of a
table, which it has already used in a similar fashion before
ALTER started.
The second bug showed up as a deadlock between table-level
locks and InnoDB row locks, which was "detected" only after
innodb_lock_wait_timeout timeout.
A transaction would start using the table and modify a few
rows.
Then ALTER TABLE would come in, and start copying rows
into a temporary table. Eventually it would stumble on
the modified records and get blocked on a row lock.
The first transaction would try to do more updates, and get
blocked on thr_lock.c lock.
This situation of circular wait would only get resolved
by a timeout.
Both these bugs stemmed from inadequate solutions to the
problem of deadlocks occurring between different
locking subsystems.
In the first case we tried to avoid deadlocks between metadata
locking and table-level locking subsystems, when upgrading shared
metadata lock to exclusive one.
Transactions holding the shared lock on the table and waiting for
some table-level lock used to be aborted too aggressively.
We also allowed ALTER TABLE to start in presence of transactions
that modify the subject table. ALTER TABLE acquires
TL_WRITE_ALLOW_READ lock at start, and that block all writes
against the table (naturally, we don't want any writes to be lost
when switching the old and the new table). TL_WRITE_ALLOW_READ
lock, in turn, would block the started transaction on thr_lock.c
lock, should they do more updates. This, again, lead to the need
to abort such transactions.
The second bug occurred simply because we didn't have any
mechanism to detect deadlocks between the table-level locks
in thr_lock.c and row-level locks in InnoDB, other than
innodb_lock_wait_timeout.
This patch solves both these problems by moving lock conflicts
which are causing these deadlocks into the metadata locking
subsystem, thus making it possible to avoid or detect such
deadlocks inside MDL.
To do this we introduce new type-of-operation-aware metadata
locks, which allow MDL subsystem to know not only the fact that
transaction has used or is going to use some object but also what
kind of operation it has carried out or going to carry out on the
object.
This, along with the addition of a special kind of upgradable
metadata lock, allows ALTER TABLE to wait until all
transactions which has updated the table to go away.
This solves the second issue.
Another special type of upgradable metadata lock is acquired
by LOCK TABLE WRITE. This second lock type allows to solve the
first issue, since abortion of table-level locks in event of
DDL under LOCK TABLES becomes also unnecessary.
Below follows the list of incompatible changes introduced by
this patch:
- From now on, ALTER TABLE and CREATE/DROP TRIGGER SQL (i.e. those
statements that acquire TL_WRITE_ALLOW_READ lock)
wait for all transactions which has *updated* the table to
complete.
- From now on, LOCK TABLES ... WRITE, REPAIR/OPTIMIZE TABLE
(i.e. all statements which acquire TL_WRITE table-level lock) wait
for all transaction which *updated or read* from the table
to complete.
As a consequence, innodb_table_locks=0 option no longer applies
to LOCK TABLES ... WRITE.
- DROP DATABASE, DROP TABLE, RENAME TABLE no longer abort
statements or transactions which use tables being dropped or
renamed, and instead wait for these transactions to complete.
- Since LOCK TABLES WRITE now takes a special metadata lock,
not compatible with with reads or writes against the subject table
and transaction-wide, thr_lock.c deadlock avoidance algorithm
that used to ensure absence of deadlocks between LOCK TABLES
WRITE and other statements is no longer sufficient, even for
MyISAM. The wait-for graph based deadlock detector of MDL
subsystem may sometimes be necessary and is involved. This may
lead to ER_LOCK_DEADLOCK error produced for multi-statement
transactions even if these only use MyISAM:
session 1: session 2:
begin;
update t1 ... lock table t2 write, t1 write;
-- gets a lock on t2, blocks on t1
update t2 ...
(ER_LOCK_DEADLOCK)
- Finally, support of LOW_PRIORITY option for LOCK TABLES ... WRITE
was abandoned.
LOCK TABLE ... LOW_PRIORITY WRITE from now on has the same
priority as the usual LOCK TABLE ... WRITE.
SELECT HIGH PRIORITY no longer trumps LOCK TABLE ... WRITE in
the wait queue.
- We do not take upgradable metadata locks on implicitly
locked tables. So if one has, say, a view v1 that uses
table t1, and issues:
LOCK TABLE v1 WRITE;
FLUSH TABLE t1; -- (or just 'FLUSH TABLES'),
an error is produced.
In order to be able to perform DDL on a table under LOCK TABLES,
the table must be locked explicitly in the LOCK TABLES list.
Rename method as to not hide a base.
Reorder attributes initialization.
Remove unused variable.
Rework code to silence a warning due to assignment used as truth value.
