Statements with CONNECTION_ID were forced to be kept in the transactional
cache and by consequence non-transactional changes that were supposed to
be flushed ahead of the transaction were kept in the transactional cache.
This happened because after BUG#51894 any statement whose thd's
thread_specific_used was set was kept in the transactional cache. The idea
was to keep changes on temporary tables in the transactional cache. However,
the thread_specific_used was set not only for statements that accessed
temporary tables but also when the CONNECTION_ID was used.
To fix the problem, we created a new variable to keep track of updates
to temporary tables.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
This assertion could be triggered during execution of OPTIMIZE TABLE for
InnoDB tables. As part of optimize for InnoDB tables, the table is recreated
and then opened again. If the reopen failed for any reason, the assertion
would be triggered. This could for example be caused by a concurrent DROP
TABLE executed by a different connection. The reason for the assertion was
that any failures during reopening were ignored.
This patch fixes the problem by making sure that the result of reopening the
table is checked and that any error messages are sent to the client.
Test case added to innodb_mysql_sync.test.
This was a deadlock between CREATE/ALTER/DROP EVENT and a query
accessing both the mysql.event table and I_S.GLOBAL_VARIABLES.
The root of the problem was that the LOCK_event_metadata mutex was
used to both protect the "event_scheduler" global system variable
and the internal event data structures used by CREATE/ALTER/DROP EVENT.
The deadlock would occur if CREATE/ALTER/DROP EVENT held
LOCK_event_metadata while trying to open the mysql.event table,
at the same time as the query had mysql.event open, trying to
lock LOCK_event_metadata to access "event_scheduler".
This bug was fixed in the scope of Bug#51160 by using only
LOCK_global_system_variables to protect "event_scheduler".
This makes it so that the query above won't lock LOCK_event_metadata,
thereby preventing this deadlock from occuring.
This patch contains no code changes.
Test case added to lock_sync.test.
even if myisam-recover is OFF
The problem was that a corrupted MyISAM table was auto repaired
even if the myisam_recover_options server variable (or the
myisam_recover option) was set to OFF.
The reason was that the auto_repair() function, which is supposed
to say if auto repair is to be used, did not use the server variable
setting correctly. This bug was a regression introduced by WL#4738.
This patch fixes the problem by making sure auto_repair() returns
FALSE if myisam_recover_options is set to OFF.
Test case added to myisam.test.
for write by another connection
The problem was that if a table was locked in one connection by
LOCK TABLES ... WRITE, REPAIR TABLE or OPTIMIZE TABLE, SHOW CREATE
TABLE from another connection would be blocked. As SHOW CREATE TABLE
only reads metadata about the table, such blocking is not needed.
The problem was that when SHOW CREATE TABLE tried to get a metadata
lock on the table in order to open it, it used the wrong type of
metadata lock request. It used MDL_SHARED_READ which is used when
the intent is to read both table metadata and table data. Instead
it should have used MDL_SHARED_HIGH_PRIO which signifies an intent
to only read metadata.
This patch fixes the problem by making sure SHOW CREATE TABLE uses
the MDL_SHARED_HIGH_PRIO metadata lock request type when trying to
open the table. The patch also fixes a similar problem with the
mysql_list_fields API call.
Test case added to show_check.test.
Allow stored procedure variables in LIMIT clause.
Only allow variables of INTEGER types.
Handle negative values by means of an implicit cast to UNSIGNED
(similarly to prepared statement placeholders).
Add tests.
Make sure replication works by not doing NAME_CONST substitution
for variables in LIMIT clause.
Add replication tests.
ChangeSet@1.2703, 2007-12-07 09:35:28-05:00, cmiller@zippy.cornsilk.net +40 -0
Bug#13174: SHA2 function
Patch contributed from Bill Karwin, paper unnumbered CLA in Seattle
Implement SHA2 functions.
Chad added code to make it work with YaSSL. Also, he removed the
(probable) bug of embedded server never using SSL-dependent
functions. (libmysqld/Makefile.am didn't read ANY autoconf defs.)
Function specification:
SHA2( string cleartext, integer hash_length )
-> string hash, or NULL
where hash_length is one of 224, 256, 384, or 512. If either is
NULL or a length is unsupported, then the result is NULL. The
resulting string is always the length of the hash_length parameter
or is NULL.
Include the canonical hash examples from the NIST in the test
results.
---
Polish and address concerns of reviewers.
Problem: Segmentation fault in add_group_and_distinct_keys() when accessing
field of what is assumed to be an Item_field object.
Cause: In case of views, the item added to list by is_indexed_agg_distinct()
was not of type Item_field, but Item_ref.
Resolution: Add the real Item_field object, the one referred to by
Item_ref object, to the list, instead.
The failing assertion was written with the assumption that a NULL
string can never be passed to my_strtod(). However, an empty string
may be passed under some circumstances by passing str == NULL and
*end == NULL.
Fixed the assertion to take the above case into account.
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Problem: caseup_multiply and casedn_multiply members
were not initialized for a dynamic collation, so
UPPER() and LOWER() functions returned empty strings.
Fix: initializing the members properly.
Adding tests:
mysql-test/r/ctype_ldml.result
mysql-test/t/ctype_ldml.test
Applying the fix:
mysys/charset.c
(Original patch by Sinisa Milivojevic)
The YEAR(4) value of 2000 was equal to the "bad" YEAR(4) value of 0000.
The get_year_value() function has been modified to not adjust bad
YEAR(4) value to 2000.
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
The problem is that when we make conditon for
grouped result const part of condition is cut off.
It happens because some parts of 'having' condition
which refer to outer join become const after
make_join_statistics. These parts may be lost
during further having condition transformation
in JOIN::exec. The fix is adding 'having'
condition check for const tables after
make_join_statistics is performed.
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
This has been back-ported from 6.0 as the problems proved to afflict
5.1 as well.
The fix exposed two new bugs. They were reported as follows.
Bug no 52174: Sometimes wrong plan when reading a MAX value
from non-NULL index
Bug no 52173: Reading NULL value from non-NULL index gives wrong
result in embedded server
Both bugs taken together affect a much smaller class of queries than #47762,
so the fix stays for now.
Optimizer erroneously translated LEFT JOIN into INNER JOIN.
It leads to cutting rows with NULL right side. It happens
because Item_row uses not_null_tables() method form the
base(Item) class and does not calculate 'null tables'
properly. The fix is adding calculation of 'not null tables'
to Item_row.
The crash happens because of discrepancy between values of
conts_tables and join->const_table_map(make_join_statisctics).
Calculation of conts_tables used condition with
HA_STATS_RECORDS_IS_EXACT flag check. Calculation of
join->const_table_map does not use this flag check.
In case of MERGE table without union with index
the table does not become const table and
thus join_read_const_table() is not called
for the table. join->const_table_map supposes
this table is const and later in make_join_select
this table is used for making&calculation const
condition. As table record buffer is not populated
it leads to crash.
The fix is adding a check if an engine supports
HA_STATS_RECORDS_IS_EXACT flag before updating
join->const_table_map.
