- Change some static variables to dynamic to ensure that we don't do any memory
allocations before server starts or stops
- Print more memory information on SIGHUP. Fixed output.
- Write out if memory was lost if run with --debug-at-exit
- Fixed wrong #ifdef in sql_cache.cc
This includes fixing all utilities to not have any memory leaks,
as safemalloc warnings stopped tests from passing on MacOSX.
- Ensure that all clients takes character-set-dir, as the
libmysqlclient library will use it.
- mysql-test-run now passes character-set-dir to all external clients.
- Changed dynstr_free() so that it can be called twice (made freeing code easier)
- Changed rpl_global_gtid_slave_state to be allocated dynamicly as it
includes a mutex that needs to be initizlied/destroyed before my_end() is called.
- Removed rpl_slave_state::init() and rpl_slave_stage::deinit() as
their job are better handling by constructor and delete.
- Print alias instead of table_name in check_duplicate_key as
table_name may have been converted to lower case.
Other things:
- Fixed a case in time_to_datetime_with_warn() where we where
using && instead of & in tests
The binlog contains specially marked format description events to mark
when a master restart happened (which could have caused temporary
tables to be silently dropped). Such events also cause slave to close
temporary tables.
However, there was a bug that if after this, slave re-connects to the
master in GTID mode, the master can send an old format description
event again. If temporary tables are closed when such event is seen
for the second time, it might drop temporary tables created after that
event, and cause replication failure.
With this patch, the restart flag of the format description event is
cleared by the master when it is sent to the slave in a subsequent
connection, to avoid the errorneous temp table close.
The problem occurs in parallel replication in GTID mode, when we are using
multiple replication domains. In this case, if the SQL thread stops, the
slave GTID position may refer to a different point in the relay log for each
domain.
The bug was that when the SQL thread was stopped and restarted (but the IO
thread was kept running), the SQL thread would resume applying the relay log
from the point of the most advanced replication domain, silently skipping all
earlier events within other domains. This caused replication corruption.
This patch solves the problem by storing, when the SQL thread stops with
multiple parallel replication domains active, the current GTID
position. Additionally, the current position in the relay logs is moved back
to a point known to be earlier than the current position of any replication
domain. Then when the SQL thread restarts from the earlier position, GTIDs
encountered are compared against the stored GTID position. Any GTID that was
already applied before the stop is skipped to avoid duplicate apply.
This patch should have no effect if multi-domain GTID parallel replication is
not used. Similarly, if both SQL and IO thread are stopped and restarted, the
patch has no effect, as in this case the existing relay logs are removed and
re-fetched from the master at the current global @@gtid_slave_pos.
Before, the arrival of same GTID twice in multi-source replication
would cause double-apply or in gtid strict mode an error.
Keep the behaviour, but add an option --gtid-ignore-duplicates which
allows to correctly handle duplicates, ignoring all but the first.
This relies on the user ensuring correct configuration so that
sequence numbers are strictly increasing within each replication
domain; then duplicates can be detected simply by comparing the
sequence numbers against what is already applied.
Only one master connection (but possibly multiple parallel worker
threads within that connection) is allowed to apply events within
one replication domain at a time; any other connection that
receives a GTID in the same domain either discards it (if it is
already applied) or waits for the other connection to not have
any events to apply.
Intermediate patch, as proof-of-concept for testing. The main limitation
is that currently it is only implemented for parallel replication,
@@slave_parallel_threads > 0.
Rewrite the gtid_waiting::wait_for_gtid() function.
The code was rubbish (and buggy). Now the logic is
much clearer.
Also fix a missing slave sync that could cause test failure.
MASTER_GTID_WAIT() is similar to MASTER_POS_WAIT(), but works with a
GTID position rather than an old-style filename/offset.
@@LAST_GTID gives the GTID assigned to the last transaction written
into the binlog.
Together, the two can be used by applications to obtain the GTID of
an update on the master, and then do a MASTER_GTID_WAIT() for that
position on any read slave where it is important to get results that
are caught up with the master at least to the point of the update.
The implementation of MASTER_GTID_WAIT() is implemented in a way
that tries to minimise the performance impact on the SQL threads,
even in the presense of many waiters on single GTID positions (as
from @@LAST_GTID).
There were some places where insufficient locking between
parallel threads could cause invalid memory accesses and
possibly other grief.
This patch adds the missing locking, and moves the locking
into the struct rpl_binlog_state methods to make it easier
to see that proper locking is in place everywhere.
Two problems were fixed:
1. When not in GTID mode (master_use_gtid=no), then we must not apply events
in different domains in parallel (in non-GTID mode we are not capable of
restarting at different points in different domains).
2. When transactions B and C group commit together, but after and separate
from A, we can apply B and C in parallel, but both B and C must not start
until A has committed. Fix sub_id to be globally increasing (not just
per-domain increasing) so that this wait (which is based on sub_id) can be
done correctly.
Implement @@gtid_binlog_state. This is the internal state of the binlog
(most recent GTID logged for every domain_id and server_id). This allows
to save the state before RESET MASTER and restore it afterwards.
The ignored events are not written to the relay log, but instead a fake
Rotate event is generated to handle update of position.
Extend this for Gtid so we similarly generate a fake Gtid_list event
to update the GTID position.
Also fix an unrelated test issue that got triggered by the added test cases.
The main bug here was the following situation:
Suppose we set up a completely new master2 as an extra multi-master to an
existing slave that already has a different master1 for domain_id=0. When the
slave tries to connect to master2, master2 will not have anything that slave
requests in domain_id=0, but that is fine as master2 is supposedly meant to
serve eg. domain_id=1. (This is MDEV-4485).
But suppose that master2 then actually starts sending events from
domain_id=0. In this case, the fix for MDEV-4485 was incomplete, and the code
would fail to give the error that the position requested by the slave in
domain_id=0 was missing from the binlogs of master2. This could lead to lost
events or completely wrong replication.
The patch for this bug fixes this issue.
In addition, it cleans up the code a bit, getting rid of the fake_gtid_hash in
the code. And the error message when slave and master have diverged due to
alternate future is clarified, as requested in the bug description.
Fix problems related to reconnect. When we need to reconnect (ie. explict
stop/start of just the IO thread by user, or automatic reconnect due to
loosing network connection with the master), it is a bit complex to correctly
resume at the right point without causing duplicate or missing events in the
relay log. The previous code had multiple problems in this regard.
With this patch, the problem is solved as follows. The IO thread keeps track
(in memory) of which GTID was last queued to the relay log. If it needs to
reconnect, it resumes at that GTID position. It also counts number of events
received within the last, possibly partial, event group, and skips the same
number of events after a reconnect, so that events already enqueued before the
reconnect are not duplicated.
(There is no need to keep any persistent state; whenever we restart slave
threads after both of them being stopped (such as after server restart), we
erase the relay logs and start over from the last GTID applied by SQL thread.
But while the SQL thread is running, this patch is needed to get correct relay
log).
When @@GLOBAL.gtid_strict_mode=1, then certain operations result
in error that would otherwise result in out-of-order binlog files
between servers.
GTID sequence numbers are now allocated independently per domain;
this results in less/no holes in GTID sequences, increasing the
likelyhood that diverging binlogs will be caught by the slave when
GTID strict mode is enabled.
Change of user interface to be more logical and more in line with expectations
to work similar to old-style replication.
User can now explicitly choose in CHANGE MASTER whether binlog position is
taken into account (master_gtid_pos=current_pos) or not (master_gtid_pos=
slave_pos) when slave connects to master.
@@gtid_pos is replaced by three separate variables @@gtid_slave_pos (can
be set by user, replicated GTIDs only), @@gtid_binlog_pos (read only), and
@@gtid_current_pos (a combination of the two, most recent GTID within each
domain). mysql.rpl_slave_state is renamed to mysql.gtid_slave_pos to match.
This fixes MDEV-4474.
Implement START SLAVE UNTIL master_gtid_pos = "<GTID position>".
Add test cases, including a test showing how to use this to promote
a new master among a set of slaves.
Solaris fixes:
- Fixed that wait_timeout_func and wait_timeout tests works on solaris
- We have to compile without NO_ALARM on Solaris as Solaris doesn't support timeouts on sockets with setsockopt(.. SO_RCVTIMEO).
- Fixed that compile-solaris-amd64-debug works (before that we got a wrong ELF class: ELFCLASS64 on linkage)
- Added missing sync_with_master
Other bug fixes:
- Free memory for rpl_global_gtid_binlog_state before exit() to avoid 'accessing uninitalized mutex' error.
BUILD/FINISH.sh:
Fixed issues on Solaris with ksh
BUILD/compile-solaris-amd64-debug:
Added missing -m64 flag
configure.cmake:
We have to compile without NO_ALARM on Solaris as Solaris doesn't support timeouts on sockets with setsockopt(.. SO_RCVTIMEO)
mysql-test/suite/rpl/t/rpl_gtid_mdev4473.test:
- Added missing sync_with_master (fix by knielsen)
sql-common/client.c:
Added () to get rid of compiler warning
sql/item_strfunc.cc:
Fixed compiler warning
sql/log.cc:
Free memory for static variable rpl_global_gtid_binlog_state before exit()
- If we are compiling with safemalloc, we would try to call sf_free() for some members after sf_terminate() was called, which would result of trying to access the uninitalized mutex 'sf_mutex'
sql/multi_range_read.cc:
Fixed compiler warnings of converting double to ulong.
sql/opt_range.cc:
Fixed compiler warnings of converting double to ulong or uint
- Better to have all variables that can be number of rows as 'ha_rows'
sql/rpl_gtid.cc:
Added rpl_binlog_state::free() to be able to free memory for static objects before exit()
sql/rpl_gtid.h:
Added rpl_binlog_state::free() to be able to free memory for static objects before exit()
sql/set_var.cc:
Fixed compiler warning
sql/sql_join_cache.cc:
Fixed compiler warnings of converting double to uint
sql/sql_show.cc:
Added cast to get rid of compiler warning
sql/sql_statistics.cc:
Remove code that didn't do anything.
(store_record() with record[0] is a no-op)
storage/xtradb/os/os0file.c:
Added __attribute__ ((unused))
support-files/compiler_warnings.supp:
Ignore warnings from atomic_add_64_nv
(was not able to fix this with a cast as the macro is a bit different between systems)
vio/viosocket.c:
Added more DBUG_PRINT
Fix MDEV-4275 - I/O thread restart duplicates events in the relay log.
The first time we connect to master after CHANGE MASTER or restart, we connect
from the GTID position. But then subsequent reconnects or IO thread restarts
reconnect with the old-style file/offset binlog pos from where it left off at
last disconnect. This is necessary to avoid duplicate events in the relay
logs, as there is nothing that synchronises the SQL thread update of GTID
state (multiple threads in case of multi-source) with IO thread reconnects.
Test cases.
Some small cleanups and fixes.
Fix things so that a master can switch with MASTER_GTID_POS=AUTO to a slave
that was previously running with log_slave_updates=0, by looking into the
slave replication state on the master when the slave requests something not
present in the binlog.
Be a bit more strict about what position the slave can ask for, to avoid some
easy-to-hit misconfiguration errors.
Start over with seq_no counter when RESET MASTER.
