When @@session.binlog_format is modified inside a transaction,
it can cause slave to go out of sync.
To fix the problem, make the session variable 'binlog_format'
read-only inside a transaction.
This patch fixes these warnings and some compile time warnings.
On top of that, it also fixes rpl_err_ignoredtable test failure.
This test was failing because the warning suppression text was not
matching the latest text. We fix this by making them match.
Bug#49836 reports that the geometry type does not work
with WL#5151 applied.
The GEOMETRY type inherits the blob comparison function,
which read the pack length from the metadata. The GEOMETRY
type does not fill in the metadata with anything sensible,
so it is always zero, meaning that the pack length for the
source type is considered zero, rendering it always "smaller"
than the target type which has pack length 4 (without pointer).
This patch fixes the problem by defining
Field_geom::pack_length_from_metadata() to always use the
same as Field_geom::row_pack_length().
when replicating
The function create_virtual_tmp_table does not
set db_low_byte_first in the same way as
create_tmp_table does, causing copying from
the virtual table to a real table to get strange
values for SET types on big-endian machines.
for InnoDB
The class Field_bit_as_char stores the metadata for the
field incorrecly because bytes_in_rec and bit_len are set
to (field_length + 7 ) / 8 and 0 respectively, while
Field_bit has the correct values field_length / 8 and
field_length % 8.
Solved the problem by re-computing the values for the
metadata based on the field_length instead of using the
bytes_in_rec and bit_len variables.
To handle compatibility with old server, a table map
flag was added to indicate that the bit computation is
exact. If the flag is clear, the slave computes the
number of bytes required to store the bit field and
compares that instead, effectively allowing replication
*without conversion* from any field length that require
the same number of bytes to store.
Problem: The test was written before BUG#45827 was fixed.
The test contained code that assumed the wrong behavior,
pre-BUG#45827. Then, the fix for BUG#45827 was merged
from 5.1-rep+2 to 5.1-rep+3. Since the test case assumed
the wrong behavior, it failed. This should have been fixed
by making the test assume the correct behavior, but was
fixed by updating the result file to assert failure.
Fix 1: fix the test to assume correct behavior
(post-BUG#45827), update result file.
Fix 2: make test fail with 'die' instead of 'exit' when
wrong behavior is detected. Thus, the test cannot be
silenced with a wrong result file in case the behavior
will change again.
Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
Support for flushing individual logs, so that the user can
selectively flush a subset of the server logs.
Flush of individual logs is done according to the
following syntax:
FLUSH <log_category> LOGS;
The syntax is extended so that the user is able to flush a
subset of logs:
FLUSH [log_category LOGS,];
where log_category is one of:
SLOW
ERROR
BINARY
ENGINE
GENERAL
RELAY.
applied revisions: r6185, r6186, r6189, r6194
r6185 - only code changes incorporated, changesets which change
innodb tests in the main mysql suite are discarded
r61889 - Fixes BUG#48782
Detailed revision comments:
r6185 | marko | 2009-11-17 16:44:20 +0200 (Tue, 17 Nov 2009) | 16 lines
branches/zip: Report duplicate table names
to the client connection, not to the error log. This change will allow
innodb-index.test to be re-enabled. It was previously disabled, because
mysql-test-run does not like output in the error log.
row_create_table_for_mysql(): Do not output anything to the error log
when reporting DB_DUPLICATE_KEY. Let the caller report the error.
Add a TODO comment that the dict_table_t object is apparently not freed
when an error occurs.
create_table_def(): Convert InnoDB table names to the character set
of the client connection for reporting. Use my_error(ER_WRONG_COLUMN_NAME)
for reporting reserved column names. Report my_error(ER_TABLE_EXISTS_ERROR)
when row_create_table_for_mysql() returns DB_DUPLICATE_KEY.
rb://206
r6186 | vasil | 2009-11-17 16:48:14 +0200 (Tue, 17 Nov 2009) | 4 lines
branches/zip:
Add ChangeLog entry for r6185.
r6189 | marko | 2009-11-18 11:36:18 +0200 (Wed, 18 Nov 2009) | 5 lines
branches/zip: ha_innobase::add_index(): When creating the primary key
and the table is being locked by another transaction,
do not attempt to drop the table. (Bug #48782)
Approved by Sunny Bains over IM
r6194 | vasil | 2009-11-19 09:24:45 +0200 (Thu, 19 Nov 2009) | 5 lines
branches/zip:
Increment version number from 1.0.5 to 1.0.6 since 1.0.5 was just released
by MySQL and we will soon release 1.0.6.
Fixes several test cases.
applied revisions: r6181, r6182, r6183, r6184
r6183 - changes are made only to tests in innodb suite which is only
innodb-consistent-master.opt
Detailed revision comments:
r6181 | vasil | 2009-11-17 12:21:41 +0200 (Tue, 17 Nov 2009) | 33 lines
branches/zip:
At the end of innodb-index.test: restore the environment as it was before
the test was started to silence this warning:
MTR's internal check of the test case 'main.innodb-index' failed.
This means that the test case does not preserve the state that existed
before the test case was executed. Most likely the test case did not
do a proper clean-up.
This is the diff of the states of the servers before and after the
test case was executed:
mysqltest: Logging to '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.log'.
mysqltest: Results saved in '/tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result'.
mysqltest: Connecting to server localhost:13000 (socket /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/mysqld.1.sock) as 'root', connection 'default', attempt 0 ...
mysqltest: ... Connected.
mysqltest: Start processing test commands from './include/check-testcase.test' ...
mysqltest: ... Done processing test commands.
--- /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.result 2009-11-17 13:10:40.000000000 +0300
+++ /tmp/autotest.sh-20091117_033000-zip.btyZwu/mysql-5.1/mysql-test/var/tmp/check-mysqld_1.reject 2009-11-17 13:10:54.000000000 +0300
@@ -84,7 +84,7 @@
INNODB_DOUBLEWRITE ON
INNODB_FAST_SHUTDOWN 1
INNODB_FILE_FORMAT Antelope
-INNODB_FILE_FORMAT_CHECK Antelope
+INNODB_FILE_FORMAT_CHECK Barracuda
INNODB_FILE_PER_TABLE OFF
INNODB_FLUSH_LOG_AT_TRX_COMMIT 1
INNODB_FLUSH_METHOD
mysqltest: Result content mismatch
not ok
r6182 | marko | 2009-11-17 13:49:15 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Set svn:eol-style on mysql-test files.
r6183 | marko | 2009-11-17 13:51:16 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: Prepend loose_ to plugin-only mysql-test options.
r6184 | marko | 2009-11-17 13:52:01 +0200 (Tue, 17 Nov 2009) | 1 line
branches/zip: innodb-index.test: Restore innodb_file_format_check.
1. add testcase for BUG#46676
2. Allow CREATE INDEX to be interrupted
3. ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log
4. ChangeLog entries
appplied revisions:r6169, r6170, r6175, r6177, r6179
Detailed revision comments:
r6169 | calvin | 2009-11-12 14:40:43 +0200 (Thu, 12 Nov 2009) | 6 lines
branches/zip: add test case for bug#46676
This crash is reproducible with InnoDB plugin 1.0.4 + MySQL 5.1.37.
But no longer reproducible after MySQL 5.1.38 (with plugin 1.0.5).
Add test case to catch future regression.
r6170 | marko | 2009-11-12 15:49:08 +0200 (Thu, 12 Nov 2009) | 4 lines
branches/zip: Allow CREATE INDEX to be interrupted. (Issue #354)
rb://183 approved by Heikki Tuuri
r6175 | vasil | 2009-11-16 20:07:39 +0200 (Mon, 16 Nov 2009) | 4 lines
branches/zip:
Wrap line at 78th char in the ChangeLog
r6177 | calvin | 2009-11-16 20:20:38 +0200 (Mon, 16 Nov 2009) | 2 lines
branches/zip: add an entry to ChangeLog for r6065
r6179 | marko | 2009-11-17 10:19:34 +0200 (Tue, 17 Nov 2009) | 2 lines
branches/zip: ha_innobase::change_active_index(): When the history is
missing, report it to the client, not to the error log.
applied revisions: r6157
Detailed revision comments:
r6157 | jyang | 2009-11-11 14:27:09 +0200 (Wed, 11 Nov 2009) | 10 lines
branches/zip: Fix an issue that a local variable defined
in innodb_file_format_check_validate() is being referenced
across function in innodb_file_format_check_update().
In addition, fix "set global innodb_file_format_check =
DEFAULT" call.
Bug #47167: "set global innodb_file_format_check" cannot
set value by User-Defined Variable."
rb://169 approved by Sunny Bains and Marko.
Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153
Detailed revision comments:
r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:
(everything except the last white-space change was skipped as it is already
in branches/zip)
------------------------------------------------------------------------
r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
Changed paths:
M /branches/5.1/Makefile.am
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1:
Backport c6121 from branches/zip:
------------------------------------------------------------------------
r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
Changed paths:
M /branches/zip/mysql-test/innodb-autoinc.result
branches/zip: This test has been problematic for sometime now. The underlying
bug is that the data dictionaries get out of sync. In the AUTOINC code we
try and apply salve to the symptoms. In the past MySQL made some unrelated
change and the dictionaries stopped getting out of sync and this test started
to fail. Now, it seems they have reverted that changed and the test is
passing again. I suspect this is not he last time that this test will change.
------------------------------------------------------------------------
------------------------------------------------------------------------
r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
Changed paths:
M /branches/5.1/Makefile.am
branches/5.1:
Revert a change to Makefile.am that sneaked unnoticed in c6127.
------------------------------------------------------------------------
r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/ha_prototypes.h
M /branches/5.1/ut/ut0ut.c
branches/5.1: Port r6134 from branches/zip:
------------------------------------------------------------------------
r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
------------------------------------------------------------------------
innobase_print_identifier(): Replace with innobase_convert_name().
innobase_convert_identifier(): New function, called by innobase_convert_name().
------------------------------------------------------------------------
r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
Changed paths:
M /branches/5.1/CMakeLists.txt
branches/5.1:
Followup to r5700: Adjust the changes so they are the same as in the BZR
repository.
------------------------------------------------------------------------
r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
Merge a part of r2911.5.5 from MySQL:
(the other part of this was merged in c5700)
------------------------------------------------------------
revno: 2911.5.5
committer: Vladislav Vaintroub <vvaintroub@mysql.com>
branch nick: 5.1-innodb_plugin
timestamp: Wed 2009-06-10 10:59:49 +0200
message:
Backport WL#3653 to 5.1 to enable bundled innodb plugin.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
removed:
storage/innodb_plugin/handler/handler0vars.h
storage/innodb_plugin/handler/win_delay_loader.cc
added:
storage/mysql_storage_engine.cmake
win/create_def_file.js
modified:
CMakeLists.txt
include/m_ctype.h
include/my_global.h
include/my_sys.h
include/mysql/plugin.h
libmysqld/CMakeLists.txt
mysql-test/mysql-test-run.pl
mysql-test/t/plugin.test
mysql-test/t/plugin_load-master.opt
mysys/charset.c
sql/CMakeLists.txt
sql/handler.h
sql/mysql_priv.h
sql/mysqld.cc
sql/sql_class.cc
sql/sql_class.h
sql/sql_list.h
sql/sql_profile.h
storage/Makefile.am
storage/archive/CMakeLists.txt
storage/blackhole/CMakeLists.txt
storage/csv/CMakeLists.txt
storage/example/CMakeLists.txt
storage/federated/CMakeLists.txt
storage/heap/CMakeLists.txt
storage/innobase/CMakeLists.txt
storage/innobase/handler/ha_innodb.cc
storage/innodb_plugin/CMakeLists.txt
storage/innodb_plugin/handler/ha_innodb.cc
storage/innodb_plugin/handler/handler0alter.cc
storage/innodb_plugin/handler/i_s.cc
storage/innodb_plugin/plug.in
storage/myisam/CMakeLists.txt
storage/myisammrg/CMakeLists.txt
win/Makefile.am
win/configure.js
------------------------------------------------------------------------
r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
White space fixup.
------------------------------------------------------------------------
SET TRANSACTION ISOLATION LEVEL is used to temporarily set
the trans.iso.level for the next transaction. After the
transaction, the iso.level is (re-)set to value of the
session variable 'tx_isolation'.
The bug is caused by setting the thd->variables.tx_isolation
field to the value of the session variable upon each
statement commit. It should only be set at the end of the
full transaction.
The fix has been to remove the setting of the variable in
ha_autocommit_or_rollback if we're in a transaction, as it
will be correctly set in either ha_rollback or
ha_commit_one_phase.
If, on the other hand, we're in autocommit mode, tx_isolation
will be explicitly set here.
1. BUG#47720 - REPLACE INTO Autoincrement column with negative values.
Detailed revision comments:
r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines
branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values.
This bug is similiar to the negative autoinc filter patch from earlier,
with the additional handling of filtering out the negative column values
set explicitly by the user.
rb://184
Approved by Heikki.
1. BUG#49032 - auto_increment field does not initialize to last value
in InnoDB Storage Engine
2. Fix whitespace issues and fix tests and make read float/double arg const
Detailed revision comments:
r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines
branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine.
We use the appropriate function to read the column value for non-integer
autoinc column types, namely float and double.
rb://208. Approved by Marko.
r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix white space errors.
r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix tests and make read float/double arg const.
r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines
branches/5.1: This is an interim fix, fix whitepsace issues.
1. BUG#48482 - innodb-autoinc.test fails with results difference
2. enable the disabled test
Detailed revision comments:
r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
branches/5.1: Fix autoinc failing test results.
(this should be skipped when merging 5.1 into zip)
Fix for failure on windows PB2 because of the result content mismatch.
In windows additional information about TCP port was causing failures.
Added to regex.
The 'slave_patternload_file' is assigned to the real path of the load data file
when initializing the object of Relay_log_info. But the path of the load data
file is not formatted to real path when executing event from relay log. So the
error will be encountered if the path of the load data file is a symbolic link.
Actually the global 'opt_secure_file_priv' is not formatted to real path when
loading data from file. So the same thing will happen too.
To fix these errors, the path of the load data file should be formatted to
real path when executing event from relay log. And the 'opt_secure_file_priv'
should be formatted to real path when loading data infile.
