innodb.table_flags: Adjust the test case. Due to the MDEV-12873 fix
in 10.2, the corrupted flags for table test.td would be converted,
and a tablespace flag mismatch will occur when trying to open the file.
Remove the SHARED_SPACE flag that was erroneously introduced in
MariaDB 10.2.2, and shift the SYS_TABLES.TYPE flags back to where
they were before MariaDB 10.2.2. While doing this, ensure that
tables created with affected MariaDB versions can be loaded,
and also ensure that tables created with MySQL 5.7 using the
TABLESPACE attribute cannot be loaded.
MariaDB 10.2.2 picked the SHARED_SPACE flag from MySQL 5.7,
shifting the MariaDB 10.1 flags PAGE_COMPRESSION, PAGE_COMPRESSION_LEVEL,
ATOMIC_WRITES by one bit. The SHARED_SPACE flag would always
be written as 0 by MariaDB, because MariaDB does not support
CREATE TABLESPACE or CREATE TABLE...TABLESPACE for InnoDB.
So, instead of the bits AALLLLCxxxxxxx we would have
AALLLLC0xxxxxxx if the table was created with MariaDB 10.2.2
to 10.2.6. (AA=ATOMIC_WRITES, LLLL=PAGE_COMPRESSION_LEVEL,
C=PAGE_COMPRESSED, xxxxxxx=7 bits that were not moved.)
PAGE_COMPRESSED=NO implies LLLLC=00000. That is not a problem.
If someone created a table in MariaDB 10.2.2 or 10.2.3 with
the attribute ATOMIC_WRITES=OFF (value 2; AA=10) and without
PAGE_COMPRESSED=YES or PAGE_COMPRESSION_LEVEL, the table should be
rejected. We ignore this problem, because it should be unlikely
for anyone to specify ATOMIC_WRITES=OFF, and because 10.2.2 and
10.2.2 were not mature releases. The value ATOMIC_WRITES=ON (1)
would be interpreted as ATOMIC_WRITES=OFF, but starting with
MariaDB 10.2.4 the ATOMIC_WRITES attribute is ignored.
PAGE_COMPRESSED=YES implies that PAGE_COMPRESSION_LEVEL be between
1 and 9 and that ROW_FORMAT be COMPACT or DYNAMIC. Thus, the affected
wrong bit pattern in SYS_TABLES.TYPE is of the form AALLLL10DB00001
where D signals the presence of a DATA DIRECTORY attribute and B is 1
for ROW_FORMAT=DYNAMIC and 0 for ROW_FORMAT=COMPACT. We must interpret
this bit pattern as AALLLL1DB00001 (discarding the extraneous 0 bit).
dict_sys_tables_rec_read(): Adjust the affected bit pattern when
reading the SYS_TABLES.TYPE column. In case of invalid flags,
report both SYS_TABLES.TYPE (after possible adjustment) and
SYS_TABLES.MIX_LEN.
dict_load_table_one(): Replace an unreachable condition on
!dict_tf2_is_valid() with a debug assertion. The flags will already
have been validated by dict_sys_tables_rec_read(); if that validation
fails, dict_load_table_low() will have failed.
fil_ibd_create(): Shorten an error message about a file pre-existing.
Datafile::validate_to_dd(): Clarify an error message about tablespace
flags mismatch.
ha_innobase::open(): Remove an unnecessary warning message.
dict_tf_is_valid(): Simplify and stricten the logic. Validate the
values of PAGE_COMPRESSION. Remove error log output; let the callers
handle that.
DICT_TF_BITS: Remove ATOMIC_WRITES, PAGE_ENCRYPTION, PAGE_ENCRYPTION_KEY.
The ATOMIC_WRITES is ignored once the SYS_TABLES.TYPE has been validated;
there is no need to store it in dict_table_t::flags. The PAGE_ENCRYPTION
and PAGE_ENCRYPTION_KEY are unused since MariaDB 10.1.4 (the GA release
was 10.1.8).
DICT_TF_BIT_MASK: Remove (unused).
FSP_FLAGS_MEM_ATOMIC_WRITES: Remove (the flags are never read).
row_import_read_v1(): Display an error if dict_tf_is_valid() fails.
dict_table_t::thd: Remove. This was only used by btr_root_block_get()
for reporting decryption failures, and it was only assigned by
ha_innobase::open(), and never cleared. This could mean that if a
connection is closed, the pointer would become stale, and the server
could crash while trying to report the error. It could also mean
that an error is being reported to the wrong client. It is better
to use current_thd in this case, even though it could mean that if
the code is invoked from an InnoDB background operation, there would
be no connection to which to send the error message.
Remove dict_table_t::crypt_data and dict_table_t::page_0_read.
These fields were never read.
fil_open_single_table_tablespace(): Remove the parameter "table".
innodb.row_format_redundant: Really corrupt the SYS_TABLES.MIX_LEN,
and do not use any debug instrumentation. For tables created in the
system tablespace, the contents of the column will be ignored.
Only the table t1 will refuse to load.
dict_load_table_one(): Remove the DBUG_EXECUTE_IF instrumentation.
Omit a redundant error message "incorrect flags in SYS_TABLES".
dict_sys_tables_rec_read(): Partially revert the Oracle Bug#21644827
fix, and always report errors by the return value.
fts_create_in_mem_aux_table(): Do not rely on dict_table_t::flags2,
but instead evaluate the tablespace ID.
DICT_TF2_BITS: Reduce to the correct value of 7. The two extra
high-order bits were specific to MySQL 5.7.
Cover innodb.table_flags with the new innodb_page_size.combinations
32k and 64k.
dict_sys_tables_type_validate(): Remove an assertion that made a
check in the function redundant. Remove the excessive output to
the error log, as the invalid SYS_TABLES.TYPE value is already being
output.
srv_start_state_t: Document the flags. Replace SRV_START_STATE_STAT
with SRV_START_STATE_REDO. The srv_bg_undo_sources replaces the
original use of SRV_START_STATE_STAT.
dict_stats_thread_started, buf_dump_thread_started,
buf_flush_page_cleaner_thread_started: Remove (unused).
srv_shutdown_all_bg_threads(): Always wait for the I/O threads
to exit, also in read-only mode.
os_thread_free(): Remove.
When a slow shutdown is performed soon after spawning some work for
background threads that can create or commit transactions, it is possible
that new transactions are started or committed after the purge has finished.
This is violating the specification of innodb_fast_shutdown=0, namely that
the purge must be completed. (None of the history of the recent transactions
would be purged.)
Also, it is possible that the purge threads would exit in slow shutdown
while there exist active transactions, such as recovered incomplete
transactions that are being rolled back. Thus, the slow shutdown could
fail to purge some undo log that becomes purgeable after the transaction
commit or rollback.
srv_undo_sources: A flag that indicates if undo log can be generated
or the persistent, whether by background threads or by user SQL.
Even when this flag is clear, active transactions that already exist
in the system may be committed or rolled back.
innodb_shutdown(): Renamed from innobase_shutdown_for_mysql().
Do not return an error code; the operation never fails.
Clear the srv_undo_sources flag, and also ensure that the background
DROP TABLE queue is empty.
srv_purge_should_exit(): Do not allow the purge to exit if
srv_undo_sources are active or the background DROP TABLE queue is not
empty, or in slow shutdown, if any active transactions exist
(and are being rolled back).
srv_purge_coordinator_thread(): Remove some previous workarounds
for this bug.
innobase_start_or_create_for_mysql(): Set buf_page_cleaner_is_active
and srv_dict_stats_thread_active directly. Set srv_undo_sources before
starting the purge subsystem, to prevent immediate shutdown of the purge.
Create dict_stats_thread and fts_optimize_thread immediately
after setting srv_undo_sources, so that shutdown can use this flag to
determine if these subsystems were started.
dict_stats_shutdown(): Shut down dict_stats_thread. Backported from 10.2.
srv_shutdown_table_bg_threads(): Remove (unused).
Problem appears to be that the function fsp_flags_try_adjust()
is being unconditionally invoked on every .ibd file on startup.
Based on performance investigation also the top function
fsp_header_get_crypt_offset() needs to addressed.
Ported implementation of fsp_header_get_encryption_offset()
function from 10.2 to fsp_header_get_crypt_offset().
Introduced a new function fil_crypt_read_crypt_data()
to read page 0 if it is not yet read.
fil_crypt_find_space_to_rotate(): Now that page 0 for every .ibd
file is not read on startup we need to check has page 0 read
from space that we investigate for key rotation, if it is not read
we read it.
fil_space_crypt_get_status(): Now that page 0 for every .ibd
file is not read on startup here also we need to read page 0
if it is not yet read it. This is needed
as tests use IS query to wait until background encryption
or decryption has finished and this function is used to
produce results.
fil_crypt_thread(): Add is_stopping condition for tablespace
so that we do not rotate pages if usage of tablespace should
be stopped. This was needed for failure seen on regression
testing.
fil_space_create: Remove page_0_crypt_read and extra
unnecessary info output.
fil_open_single_table_tablespace(): We call fsp_flags_try_adjust
only when when no errors has happened and server was not started
on read only mode and tablespace validation was requested or
flags contain other table options except low order bits to
FSP_FLAGS_POS_PAGE_SSIZE position.
fil_space_t::page_0_crypt_read removed.
Added test case innodb-first-page-read to test startup when
encryption is on and when encryption is off to check that not
for all tables page 0 is read on startup.
The doublewrite buffer pages must fit in the first InnoDB system
tablespace data file. The checks that were added in the initial patch
(commit 112b21da37)
were at too high level and did not cover all cases.
innodb.log_data_file_size: Test all innodb_page_size combinations.
fsp_header_init(): Never return an error. Move the change buffer creation
to the only caller that needs to do it.
btr_create(): Clean up the logic. Remove the error log messages.
buf_dblwr_create(): Try to return an error on non-fatal failure.
Check that the first data file is big enough for creating the
doublewrite buffers.
buf_dblwr_process(): Check if the doublewrite buffer is available.
Display the message only if it is available.
recv_recovery_from_checkpoint_start_func(): Remove a redundant message
about FIL_PAGE_FILE_FLUSH_LSN mismatch when crash recovery has already
been initiated.
fil_report_invalid_page_access(): Simplify the message.
fseg_create_general(): Do not emit messages to the error log.
innobase_init(): Revert the changes.
trx_rseg_create(): Refactor (no functional change).
InnoDB never supported more than one copy of a redo log.
There were provisions to do that. For Mariabackup, let us clean up
this code.
log_sys_init(): Renamed from log_init().
log_set_capacity(): Renamed from log_calc_max_ages().
log_init(): Renamed from log_group_init(). Remove the parameters
id, space_id. Let the caller invoke log_set_capacity() when needed.
log_group_t: Remove id, space_id, log_groups.
log_t: Replace log_groups with a single log.
recv_find_max_checkpoint(): Declare globally. Remove the first parameter.
xtrabackup_choose_lsn_offset(): Remove (dead code).
Problem was that all doublewrite buffer pages must fit to first
system datafile.
Ported commit 27a34df7882b1f8ed283f22bf83e8bfc523cbfde
Author: Shaohua Wang <shaohua.wang@oracle.com>
Date: Wed Aug 12 15:55:19 2015 +0800
BUG#21551464 - SEGFAULT WHILE INITIALIZING DATABASE WHEN
INNODB_DATA_FILE SIZE IS SMALL
To 10.1 (with extended error printout).
btr_create(): If ibuf header page allocation fails report error and
return FIL_NULL. Similarly if root page allocation fails return a error.
dict_build_table_def_step: If fsp_header_init fails return
error code.
fsp_header_init: returns true if header initialization succeeds
and false if not.
fseg_create_general: report error if segment or page allocation fails.
innobase_init: If first datafile is smaller than 3M and could not
contain all doublewrite buffer pages report error and fail to
initialize InnoDB plugin.
row_truncate_table_for_mysql: report error if fsp header init
fails.
srv_init_abort: New function to report database initialization errors.
srv_undo_tablespaces_init, innobase_start_or_create_for_mysql: If
database initialization fails report error and abort.
trx_rseg_create: If segment header creation fails return.
Problem was that FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION field that for
encrypted pages even in system datafiles should contain key_version
except very first page (0:0) is after encryption overwritten with
flush lsn.
Ported WL#7990 Repurpose FIL_PAGE_FLUSH_LSN to 10.1
The field FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION is consulted during
InnoDB startup.
At startup, InnoDB reads the FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
from the first page of each file in the InnoDB system tablespace.
If there are multiple files, the minimum and maximum LSN can differ.
These numbers are passed to InnoDB startup.
Having the number in other files than the first file of the InnoDB
system tablespace is not providing much additional value. It is
conflicting with other use of the field, such as on InnoDB R-tree
index pages and encryption key_version.
This worklog will stop writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION to
other files than the first file of the InnoDB system tablespace
(page number 0:0) when system tablespace is encrypted. If tablespace
is not encrypted we continue writing FIL_PAGE_FLUSH_LSN_OR_KEY_VERSION
to all first pages of system tablespace to avoid unnecessary
warnings on downgrade.
open_or_create_data_files(): pass only one flushed_lsn parameter
xb_load_tablespaces(): pass only one flushed_lsn parameter.
buf_page_create(): Improve comment about where
FIL_PAGE_FIL_FLUSH_LSN_OR_KEY_VERSION is set.
fil_write_flushed_lsn(): A new function, merged from
fil_write_lsn_and_arch_no_to_file() and
fil_write_flushed_lsn_to_data_files().
Only write to the first page of the system tablespace (page 0:0)
if tablespace is encrypted, or write all first pages of system
tablespace and invoke fil_flush_file_spaces(FIL_TYPE_TABLESPACE)
afterwards.
fil_read_first_page(): read flush_lsn and crypt_data only from
first datafile.
fil_open_single_table_tablespace(): Remove output of LSN, because it
was only valid for the system tablespace and the undo tablespaces, not
user tablespaces.
fil_validate_single_table_tablespace(): Remove output of LSN.
checkpoint_now_set(): Use fil_write_flushed_lsn and output
a error if operation fails.
Remove lsn variable from fsp_open_info.
recv_recovery_from_checkpoint_start(): Remove unnecessary second
flush_lsn parameter.
log_empty_and_mark_files_at_shutdown(): Use fil_writte_flushed_lsn
and output error if it fails.
open_or_create_data_files(): Pass only one flushed_lsn variable.
When MySQL 5.7 introduced fulltext parser plugins to InnoDB,
it hard-coded the plugin name "ngram" to mean something special.
Because -fsanitize=undefined was issuing warnings for the
assignment in row_merge_create_index() that the value is out of
range for Boolean, we remove this code that was not intended to
be used in MariaDB 10.2.
fts_check_token(): Remove the special logic for N-gram tokens.
Remove a bogus reference to gb18030_chinese_ci, which was introduced
in MySQL 5.7. It is roughly equivalent to utf8mb4_unicode_ci, just
using a different internal encoding, and different collation.
btr_defragment_thread(): Create the thread in the same place as other
threads. Do not invoke btr_defragment_shutdown(), because
row_drop_tables_for_mysql_in_background() in the master thread can still
keep invoking btr_defragment_remove_table().
logs_empty_and_mark_files_at_shutdown(): Wait for btr_defragment_thread()
to exit.
innobase_start_or_create_for_mysql(), innobase_shutdown_for_mysql():
Skip encryption and scrubbing in innodb_read_only_mode.
srv_export_innodb_status(): Do not export encryption or scrubbing
statistics in innodb_read_only mode, because the threads will not
be running.
Snappy compression method require that output buffer
used for compression is bigger than input buffer.
Similarly lzo require additional work memory buffer.
Increase the allocated buffer accordingly.
buf_tmp_buffer_t: removed unnecessary lzo_mem, crypt_buf_free and
comp_buf_free.
buf_pool_reserve_tmp_slot: use alligned_alloc and if snappy
available allocate size based on snappy_max_compressed_length and
if lzo is available increase buffer by LZO1X_1_15_MEM_COMPRESS.
fil_compress_page: Remove unneeded lzo mem (we use same buffer)
and if output buffer is not yet allocated allocate based similarly
as above.
Decompression does not require additional work area.
Modify test to use same test as other compression method tests.
Significantly reduce the amount of InnoDB, XtraDB and Mariabackup
code changes by defining pfs_os_file_t as something that is
transparently compatible with os_file_t.
In my merge of the MySQL fix for Oracle Bug#23333990 / WL#9513
I overlooked some subsequent revisions to the test, and I also
failed to notice that the test is actually always failing.
Oracle introduced the parameter innodb_stats_include_delete_marked
but failed to consistently take it into account in FOREIGN KEY
constraints that involve CASCADE or SET NULL.
When innodb_stats_include_delete_marked=ON, obviously the purge of
delete-marked records should update the statistics as well.
One more omission was that statistics were never updated on ROLLBACK.
We are fixing that as well, properly taking into account the
parameter innodb_stats_include_delete_marked.
dict_stats_analyze_index_level(): Simplify an expression.
(Using the ternary operator with a constant operand is unnecessary
obfuscation.)
page_scan_method_t: Revert the change done by Oracle. Instead,
examine srv_stats_include_delete_marked directly where it is needed.
dict_stats_update_if_needed(): Renamed from
row_update_statistics_if_needed().
row_update_for_mysql_using_upd_graph(): Assert that the table statistics
are initialized, as guaranteed by ha_innobase::open(). Update the
statistics in a consistent way, both for FOREIGN KEY triggers and
for the main table. If FOREIGN KEY constraints exist, do not dereference
a freed pointer, but cache the proper value of node->is_delete so that
it matches prebuilt->table.
row_purge_record_func(): Update statistics if
innodb_stats_include_delete_marked=ON.
row_undo_ins(): Update statistics (on ROLLBACK of a fresh INSERT).
This is independent of the parameter; the record is not delete-marked.
row_undo_mod(): Update statistics on the ROLLBACK of updating key columns,
or (if innodb_stats_include_delete_marked=OFF) updating delete-marks.
innodb.innodb_stats_persistent: Renamed and extended from
innodb.innodb_stats_del_mark. Reduced the unnecessarily large dataset
from 262,144 to 32 rows. Test both values of the configuration
parameter innodb_stats_include_delete_marked.
Test that purge is updating the statistics.
innodb_fts.innodb_fts_multiple_index: Adjust the result. The test
is performing a ROLLBACK of an INSERT, which now affects the statistics.
include/wait_all_purged.inc: Moved from innodb.innodb_truncate_debug
to its own file.
This fixes warnings that were emitted when running InnoDB test
suites on a debug server that was compiled with GCC 7.1.0 using
the flags -O3 -fsanitize=undefined.
thd_requested_durability(): XtraDB can call this with trx->mysql_thd=NULL.
Remove the function in InnoDB, because it is not used there.
calc_row_difference(): Do not call memcmp(o_ptr, NULL, 0).
innobase_index_name_is_reserved(): This can be called with
key_info=NULL, num_of_keys=0.
innobase_dropping_foreign(), innobase_check_foreigns_low(),
innobase_check_foreigns(): This can be called with
drop_fk=NULL, n_drop_fk=0.
rec_convert_dtuple_to_rec_comp(): Do not invoke memcpy(end, NULL, 0).
Fix a -fsanitizer=undefined warning that trx_undo_report_row_operation()
was being passed thr=NULL when the BTR_NO_UNDO_LOG_FLAG flag was set.
trx_undo_report_row_operation(): Remove the first two parameters.
The parameter clust_entry!=NULL distinguishes inserts from updates.
This should be a non-functional change (no observable change in
behaviour; slightly smaller code).
The parameter thr of the function btr_cur_optimistic_insert()
is not declared as nonnull, but GCC 7.1.0 with -O3 is wrongly
optimizing away the first part of the condition
UNIV_UNLIKELY(thr && thr_get_trx(thr)->fake_changes)
when the function is being called by row_merge_insert_index_tuples()
with thr==NULL.
The fake_changes is an XtraDB addition. This GCC bug only appears
to have an impact on XtraDB, not InnoDB.
We work around the problem by not attempting to dereference thr
when both BTR_NO_LOCKING_FLAG and BTR_NO_UNDO_LOG_FLAG are set
in the flags. Probably BTR_NO_LOCKING_FLAG alone should suffice.
btr_cur_optimistic_insert(), btr_cur_pessimistic_insert(),
btr_cur_pessimistic_update(): Correct comments that disagree with
usage and with nonnull attributes. No other parameter than thr can
actually be NULL.
row_ins_duplicate_error_in_clust(): Remove an unused parameter.
innobase_is_fake_change(): Unused function; remove.
ibuf_insert_low(), row_log_table_apply(), row_log_apply(),
row_undo_mod_clust_low():
Because we will be passing BTR_NO_LOCKING_FLAG | BTR_NO_UNDO_LOG_FLAG
in the flags, the trx->fake_changes flag will be treated as false,
which is the right thing to do at these low-level operations
(change buffer merge, ALTER TABLE…LOCK=NONE, or ROLLBACK).
This might be fixing actual XtraDB bugs.
Other callers that pass these two flags are also passing thr=NULL,
implying fake_changes=false. (Some callers in ROLLBACK are passing
BTR_NO_LOCKING_FLAG and a nonnull thr. In these callers, fake_changes
better be false, to avoid corruption.)
This merge reverts commit 6ca4f693c1ce472e2b1bf7392607c2d1124b4293
from current 5.6.36 innodb.
Bug #23481444 OPTIMISER CALL ROW_SEARCH_MVCC() AND READ THE
INDEX APPLIED BY UNCOMMITTED ROW
Problem:
========
row_search_for_mysql() does whole table traversal for range query
even though the end range is passed. Whole table traversal happens
when the record is not with in transaction read view.
Solution:
=========
Convert the innodb last record of page to mysql format and compare
with end range if the traversal of row_search_mvcc() exceeds 100,
no ICP involved. If it is out of range then InnoDB can avoid the
whole table traversal. Need to refactor the code little bit to
make it compile.
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
Reviewed-by: Knut Hatlen <knut.hatlen@oracle.com>
Reviewed-by: Dmitry Shulga <dmitry.shulga@oracle.com>
RB: 14660
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
Do not silence uncertain cases, or fix any bugs.
The only functional change should be that ha_federated::extra()
is not calling DBUG_PRINT to report an unhandled case for
HA_EXTRA_PREPARE_FOR_DROP.
simple_counter::add(): Add a type cast to the os_atomic_increment_ulint()
call, because GCC would check the type compatibility even when the code
branch is not being instantiated (atomic=false). On Solaris,
os_atomic_increment_ulint() actually needs a compatible parameter type,
and an error would be emitted due to an incompatible 64-bit type,
for srv_stats.n_lock_wait_time.add(diff_time).
There is a race condition related to the variable
srv_stats.n_lock_wait_current_count, which is only
incremented and decremented by the function lock_wait_suspend_thread(),
The incrementing is protected by lock_sys->wait_mutex, but the
decrementing does not appear to be protected by anything.
This mismatch could allow the counter to be corrupted when a
transactional InnoDB table or record lock wait is terminating
roughly at the same time with the start of a wait on a
(possibly different) lock.
ib_counter_t: Remove some unused methods. Prevent instantiation for N=1.
Add an inc() method that takes a slot index as a parameter.
single_indexer_t: Remove.
simple_counter<typename Type, bool atomic=false>: A new counter wrapper.
Optionally use atomic memory operations for modifying the counter.
Aligned to the cache line size.
lsn_ctr_1_t, ulint_ctr_1_t, int64_ctr_1_t: Define as simple_counter<Type>.
These counters are either only incremented (and we do not care about
losing some increment operations), or the increment/decrement operations
are protected by some mutex.
srv_stats_t::os_log_pending_writes: Document that the number is protected
by log_sys->mutex.
srv_stats_t::n_lock_wait_current_count: Use simple_counter<ulint, true>,
that is, atomic inc() and dec() operations.
lock_wait_suspend_thread(): Release the mutexes before incrementing
the counters. Avoid acquiring the lock mutex if the lock wait has
already been resolved. Atomically increment and decrement
srv_stats.n_lock_wait_current_count.
row_insert_for_mysql(), row_update_for_mysql(),
row_update_cascade_for_mysql(): Use the inc() method with the trx->id
as the slot index. This is a non-functional change, just using
inc() instead of add(1).
buf_LRU_get_free_block(): Replace the method add(index, n) with inc().
There is no slot index in the simple_counter.
