The buffer pool refactoring in MDEV-15053 and MDEV-22871 shifted
the performance bottleneck to the page flushing.
The configuration parameters will be changed as follows:
innodb_lru_flush_size=32 (new: how many pages to flush on LRU eviction)
innodb_lru_scan_depth=1536 (old: 1024)
innodb_max_dirty_pages_pct=90 (old: 75)
innodb_max_dirty_pages_pct_lwm=75 (old: 0)
Note: The parameter innodb_lru_scan_depth will only affect LRU
eviction of buffer pool pages when a new page is being allocated. The
page cleaner thread will no longer evict any pages. It used to
guarantee that some pages will remain free in the buffer pool. Now, we
perform that eviction 'on demand' in buf_LRU_get_free_block().
The parameter innodb_lru_scan_depth(srv_LRU_scan_depth) is used as follows:
* When the buffer pool is being shrunk in buf_pool_t::withdraw_blocks()
* As a buf_pool.free limit in buf_LRU_list_batch() for terminating
the flushing that is initiated e.g., by buf_LRU_get_free_block()
The parameter also used to serve as an initial limit for unzip_LRU
eviction (evicting uncompressed page frames while retaining
ROW_FORMAT=COMPRESSED pages), but now we will use a hard-coded limit
of 100 or unlimited for invoking buf_LRU_scan_and_free_block().
The status variables will be changed as follows:
innodb_buffer_pool_pages_flushed: This includes also the count of
innodb_buffer_pool_pages_LRU_flushed and should work reliably,
updated one by one in buf_flush_page() to give more real-time
statistics. The function buf_flush_stats(), which we are removing,
was not called in every code path. For both counters, we will use
regular variables that are incremented in a critical section of
buf_pool.mutex. Note that show_innodb_vars() directly links to the
variables, and reads of the counters will *not* be protected by
buf_pool.mutex, so you cannot get a consistent snapshot of both variables.
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be
removed, because the page cleaner no longer deals with writing or
evicting least recently used pages, and because the single-page writes
have been removed:
* buffer_LRU_batch_flush_avg_time_slot
* buffer_LRU_batch_flush_avg_time_thread
* buffer_LRU_batch_flush_avg_time_est
* buffer_LRU_batch_flush_avg_pass
* buffer_LRU_single_flush_scanned
* buffer_LRU_single_flush_num_scan
* buffer_LRU_single_flush_scanned_per_call
When moving to a single buffer pool instance in MDEV-15058, we missed
some opportunity to simplify the buf_flush_page_cleaner thread. It was
unnecessarily using a mutex and some complex data structures, even
though we always have a single page cleaner thread.
Furthermore, the buf_flush_page_cleaner thread had separate 'recovery'
and 'shutdown' modes where it was waiting to be triggered by some
other thread, adding unnecessary latency and potential for hangs in
relatively rarely executed startup or shutdown code.
The page cleaner was also running two kinds of batches in an
interleaved fashion: "LRU flush" (writing out some least recently used
pages and evicting them on write completion) and the normal batches
that aim to increase the MIN(oldest_modification) in the buffer pool,
to help the log checkpoint advance.
The buf_pool.flush_list flushing was being blocked by
buf_block_t::lock for no good reason. Furthermore, if the FIL_PAGE_LSN
of a page is ahead of log_sys.get_flushed_lsn(), that is, what has
been persistently written to the redo log, we would trigger a log
flush and then resume the page flushing. This would unnecessarily
limit the performance of the page cleaner thread and trigger the
infamous messages "InnoDB: page_cleaner: 1000ms intended loop took 4450ms.
The settings might not be optimal" that were suppressed in
commit d1ab89037a unless log_warnings>2.
Our revised algorithm will make log_sys.get_flushed_lsn() advance at
the start of buf_flush_lists(), and then execute a 'best effort' to
write out all pages. The flush batches will skip pages that were modified
since the log was written, or are are currently exclusively locked.
The MDEV-13670 message "page_cleaner: 1000ms intended loop took" message
will be removed, because by design, the buf_flush_page_cleaner() should
not be blocked during a batch for extended periods of time.
We will remove the single-page flushing altogether. Related to this,
the debug parameter innodb_doublewrite_batch_size will be removed,
because all of the doublewrite buffer will be used for flushing
batches. If a page needs to be evicted from the buffer pool and all
100 least recently used pages in the buffer pool have unflushed
changes, buf_LRU_get_free_block() will execute buf_flush_lists() to
write out and evict innodb_lru_flush_size pages. At most one thread
will execute buf_flush_lists() in buf_LRU_get_free_block(); other
threads will wait for that LRU flushing batch to finish.
To improve concurrency, we will replace the InnoDB ib_mutex_t and
os_event_t native mutexes and condition variables in this area of code.
Most notably, this means that the buffer pool mutex (buf_pool.mutex)
is no longer instrumented via any InnoDB interfaces. It will continue
to be instrumented via PERFORMANCE_SCHEMA.
For now, both buf_pool.flush_list_mutex and buf_pool.mutex will be
declared with MY_MUTEX_INIT_FAST (PTHREAD_MUTEX_ADAPTIVE_NP). The critical
sections of buf_pool.flush_list_mutex should be shorter than those for
buf_pool.mutex, because in the worst case, they cover a linear scan of
buf_pool.flush_list, while the worst case of a critical section of
buf_pool.mutex covers a linear scan of the potentially much longer
buf_pool.LRU list.
mysql_mutex_is_owner(), safe_mutex_is_owner(): New predicate, usable
with SAFE_MUTEX. Some InnoDB debug assertions need this predicate
instead of mysql_mutex_assert_owner() or mysql_mutex_assert_not_owner().
buf_pool_t::n_flush_LRU, buf_pool_t::n_flush_list:
Replaces buf_pool_t::init_flush[] and buf_pool_t::n_flush[].
The number of active flush operations.
buf_pool_t::mutex, buf_pool_t::flush_list_mutex: Use mysql_mutex_t
instead of ib_mutex_t, to have native mutexes with PERFORMANCE_SCHEMA
and SAFE_MUTEX instrumentation.
buf_pool_t::done_flush_LRU: Condition variable for !n_flush_LRU.
buf_pool_t::done_flush_list: Condition variable for !n_flush_list.
buf_pool_t::do_flush_list: Condition variable to wake up the
buf_flush_page_cleaner when a log checkpoint needs to be written
or the server is being shut down. Replaces buf_flush_event.
We will keep using timed waits (the page cleaner thread will wake
_at least_ once per second), because the calculations for
innodb_adaptive_flushing depend on fixed time intervals.
buf_dblwr: Allocate statically, and move all code to member functions.
Use a native mutex and condition variable. Remove code to deal with
single-page flushing.
buf_dblwr_check_block(): Make the check debug-only. We were spending
a significant amount of execution time in page_simple_validate_new().
flush_counters_t::unzip_LRU_evicted: Remove.
IORequest: Make more members const. FIXME: m_fil_node should be removed.
buf_flush_sync_lsn: Protect by std::atomic, not page_cleaner.mutex
(which we are removing).
page_cleaner_slot_t, page_cleaner_t: Remove many redundant members.
pc_request_flush_slot(): Replaces pc_request() and pc_flush_slot().
recv_writer_thread: Remove. Recovery works just fine without it, if we
simply invoke buf_flush_sync() at the end of each batch in
recv_sys_t::apply().
recv_recovery_from_checkpoint_finish(): Remove. We can simply call
recv_sys.debug_free() directly.
srv_started_redo: Replaces srv_start_state.
SRV_SHUTDOWN_FLUSH_PHASE: Remove. logs_empty_and_mark_files_at_shutdown()
can communicate with the normal page cleaner loop via the new function
flush_buffer_pool().
buf_flush_remove(): Assert that the calling thread is holding
buf_pool.flush_list_mutex. This removes unnecessary mutex operations
from buf_flush_remove_pages() and buf_flush_dirty_pages(),
which replace buf_LRU_flush_or_remove_pages().
buf_flush_lists(): Renamed from buf_flush_batch(), with simplified
interface. Return the number of flushed pages. Clarified comments and
renamed min_n to max_n. Identify LRU batch by lsn=0. Merge all the functions
buf_flush_start(), buf_flush_batch(), buf_flush_end() directly to this
function, which was their only caller, and remove 2 unnecessary
buf_pool.mutex release/re-acquisition that we used to perform around
the buf_flush_batch() call. At the start, if not all log has been
durably written, wait for a background task to do it, or start a new
task to do it. This allows the log write to run concurrently with our
page flushing batch. Any pages that were skipped due to too recent
FIL_PAGE_LSN or due to them being latched by a writer should be flushed
during the next batch, unless there are further modifications to those
pages. It is possible that a page that we must flush due to small
oldest_modification also carries a recent FIL_PAGE_LSN or is being
constantly modified. In the worst case, all writers would then end up
waiting in log_free_check() to allow the flushing and the checkpoint
to complete.
buf_do_flush_list_batch(): Clarify comments, and rename min_n to max_n.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_flush_space(): Auxiliary function to look up a tablespace for
page flushing.
buf_flush_page(): Defer the computation of space->full_crc32(). Never
call log_write_up_to(), but instead skip persistent pages whose latest
modification (FIL_PAGE_LSN) is newer than the redo log. Also skip
pages on which we cannot acquire a shared latch without waiting.
buf_flush_try_neighbors(): Do not bother checking buf_fix_count
because buf_flush_page() will no longer wait for the page latch.
Take the tablespace as a parameter, and only execute this function
when innodb_flush_neighbors>0. Avoid repeated calls of page_id_t::fold().
buf_flush_relocate_on_flush_list(): Declare as cold, and push down
a condition from the callers.
buf_flush_check_neighbor(): Take id.fold() as a parameter.
buf_flush_sync(): Ensure that the buf_pool.flush_list is empty,
because the flushing batch will skip pages whose modifications have
not yet been written to the log or were latched for modification.
buf_free_from_unzip_LRU_list_batch(): Remove redundant local variables.
buf_flush_LRU_list_batch(): Let the caller buf_do_LRU_batch() initialize
the counters, and report n->evicted.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_do_LRU_batch(): Return the number of pages flushed.
buf_LRU_free_page(): Only release and re-acquire buf_pool.mutex if
adaptive hash index entries are pointing to the block.
buf_LRU_get_free_block(): Do not wake up the page cleaner, because it
will no longer perform any useful work for us, and we do not want it
to compete for I/O while buf_flush_lists(innodb_lru_flush_size, 0)
writes out and evicts at most innodb_lru_flush_size pages. (The
function buf_do_LRU_batch() may complete after writing fewer pages if
more than innodb_lru_scan_depth pages end up in buf_pool.free list.)
Eliminate some mutex release-acquire cycles, and wait for the LRU
flush batch to complete before rescanning.
buf_LRU_check_size_of_non_data_objects(): Simplify the code.
buf_page_write_complete(): Remove the parameter evict, and always
evict pages that were part of an LRU flush.
buf_page_create(): Take a pre-allocated page as a parameter.
buf_pool_t::free_block(): Free a pre-allocated block.
recv_sys_t::recover_low(), recv_sys_t::apply(): Preallocate the block
while not holding recv_sys.mutex. During page allocation, we may
initiate a page flush, which in turn may initiate a log flush, which
would require acquiring log_sys.mutex, which should always be acquired
before recv_sys.mutex in order to avoid deadlocks. Therefore, we must
not be holding recv_sys.mutex while allocating a buffer pool block.
BtrBulk::logFreeCheck(): Skip a redundant condition.
row_undo_step(): Do not invoke srv_inc_activity_count() for every row
that is being rolled back. It should suffice to invoke the function in
trx_flush_log_if_needed() during trx_t::commit_in_memory() when the
rollback completes.
sync_check_enable(): Remove. We will enable innodb_sync_debug from the
very beginning.
Reviewed by: Vladislav Vaintroub
Since commit 8ccb3caafb it should be
more efficient to use page_id_t rather than two separate variables
for tablespace identifier and page number.
lock_rec_fold(): Replaced with page_id_t::fold().
lock_rec_hash(): Replaced with lock_sys.hash(page_id).
lock_rec_expl_exist_on_page(), lock_rec_get_first_on_page_addr(),
lock_rec_get_first_on_page(): Replaced with lock_sys.get_first().
commit de942c9f61 (MDEV-15983)
introduced a race condition that we inadequately fixed in
commit 93b69825ad (MDEV-16169).
Because fil_space_t::release() or fil_space_t::acquire() are
not protected by fil_system.mutex like their predecessors,
it is possible that stop_new_ops was set between the time
a thread checked fil_space_t::is_stopping() and invoked
fil_space_t::acquire().
In an execution trace, this happened in fil_system_t::keyrotate_next(),
causing an assertion failure in fil_delete_tablespace()
in the other thread that seeked to stop new operations.
We fix this bug by merging the flag fil_space_t::stop_new_ops
and the reference count fil_space_t::n_pending_ops into a
single word that is only being accessed by atomic memory operations.
fil_space_t::set_stopping(): Accessor for changing the state of
the former stop_new_ops flag.
fil_space_t::acquire(): Return whether the acquisition succeeded.
It would fail between set_stopping(true) and set_stopping(false).
The parameters innodb_thread_concurrency and innodb_commit_concurrency
were useful years ago when both computing resources and the implementation
of some shared data structures were limited. MySQL 5.0 or 5.1 had trouble
scaling beyond 8 concurrent connections. Most of the scalability bottlenecks
have been removed since then, and the transactions per second delivered
by MariaDB Server 10.5 should not dramatically drop upon exceeding the
'optimal' number of connections.
Hence, enabling any concurrency throttling for InnoDB actually makes
things worse. We have seen many customers mistakenly setting this to a
small value like 16 or 64 and then complaining the server was slow.
Ignoring the parameters allows us to remove some normally unused code
and data structures, which could slightly improve performance.
innodb_thread_concurrency, innodb_commit_concurrency,
innodb_replication_delay, innodb_concurrency_tickets,
innodb_thread_sleep_delay, innodb_adaptive_max_sleep_delay:
Deprecate and ignore; hard-wire to 0.
The column INFORMATION_SCHEMA.INNODB_TRX.trx_concurrency_tickets
will always report 0.
This issue was originally reported by Fungo Wang, along with a fix, as
MySQL Bug #98990.
His suggested fix was applied as part of
mysql/mysql-server@a003fc373d
and released in MySQL 5.7.31.
i_s_metrics_fill(): Add the missing call to Field::set_notnull(),
and simplify some code.
User-visible changes: The INFORMATION_SCHEMA views INNODB_BUFFER_PAGE
and INNODB_BUFFER_PAGE_LRU will report a dummy value FLUSH_TYPE=0
and will no longer report the PAGE_STATE value READY_FOR_USE.
We will remove some fields from buf_page_t and move much code to
member functions of buf_pool_t and buf_page_t, so that the access
rules of data members can be enforced consistently.
Evicting or adding pages in buf_pool.LRU will remain covered by
buf_pool.mutex.
Evicting or adding pages in buf_pool.page_hash will remain
covered by both buf_pool.mutex and the buf_pool.page_hash X-latch.
After this fix, buf_pool.page_hash lookups can entirely
avoid acquiring buf_pool.mutex, only relying on
buf_pool.hash_lock_get() S-latch.
Similarly, buf_flush_check_neighbors() can will rely solely on
buf_pool.mutex, no buf_pool.page_hash latch at all.
The buf_pool.mutex is rather contended in I/O heavy benchmarks,
especially when the workload does not fit in the buffer pool.
The first attempt to alleviate the contention was the
buf_pool_t::mutex split in
commit 4ed7082eef
which introduced buf_block_t::mutex, which we are now removing.
Later, multiple instances of buf_pool_t were introduced
in commit c18084f71b
and recently removed by us in
commit 1a6f708ec5 (MDEV-15058).
UNIV_BUF_DEBUG: Remove. This option to enable some buffer pool
related debugging in otherwise non-debug builds has not been used
for years. Instead, we have been using UNIV_DEBUG, which is enabled
in CMAKE_BUILD_TYPE=Debug.
buf_block_t::mutex, buf_pool_t::zip_mutex: Remove. We can mainly rely on
std::atomic and the buf_pool.page_hash latches, and in some cases
depend on buf_pool.mutex or buf_pool.flush_list_mutex just like before.
We must always release buf_block_t::lock before invoking
unfix() or io_unfix(), to prevent a glitch where a block that was
added to the buf_pool.free list would apper X-latched. See
commit c5883debd6 how this glitch
was finally caught in a debug environment.
We move some buf_pool_t::page_hash specific code from the
ha and hash modules to buf_pool, for improved readability.
buf_pool_t::close(): Assert that all blocks are clean, except
on aborted startup or crash-like shutdown.
buf_pool_t::validate(): No longer attempt to validate
n_flush[] against the number of BUF_IO_WRITE fixed blocks,
because buf_page_t::flush_type no longer exists.
buf_pool_t::watch_set(): Replaces buf_pool_watch_set().
Reduce mutex contention by separating the buf_pool.watch[]
allocation and the insert into buf_pool.page_hash.
buf_pool_t::page_hash_lock<bool exclusive>(): Acquire a
buf_pool.page_hash latch.
Replaces and extends buf_page_hash_lock_s_confirm()
and buf_page_hash_lock_x_confirm().
buf_pool_t::READ_AHEAD_PAGES: Renamed from BUF_READ_AHEAD_PAGES.
buf_pool_t::curr_size, old_size, read_ahead_area, n_pend_reads:
Use Atomic_counter.
buf_pool_t::running_out(): Replaces buf_LRU_buf_pool_running_out().
buf_pool_t::LRU_remove(): Remove a block from the LRU list
and return its predecessor. Incorporates buf_LRU_adjust_hp(),
which was removed.
buf_page_get_gen(): Remove a redundant call of fsp_is_system_temporary(),
for mode == BUF_GET_IF_IN_POOL_OR_WATCH, which is only used by
BTR_DELETE_OP (purge), which is never invoked on temporary tables.
buf_free_from_unzip_LRU_list_batch(): Avoid redundant assignments.
buf_LRU_free_from_unzip_LRU_list(): Simplify the loop condition.
buf_LRU_free_page(): Clarify the function comment.
buf_flush_check_neighbor(), buf_flush_check_neighbors():
Rewrite the construction of the page hash range. We will hold
the buf_pool.mutex for up to buf_pool.read_ahead_area (at most 64)
consecutive lookups of buf_pool.page_hash.
buf_flush_page_and_try_neighbors(): Remove.
Merge to its only callers, and remove redundant operations in
buf_flush_LRU_list_batch().
buf_read_ahead_random(), buf_read_ahead_linear(): Rewrite.
Do not acquire buf_pool.mutex, and iterate directly with page_id_t.
ut_2_power_up(): Remove. my_round_up_to_next_power() is inlined
and avoids any loops.
fil_page_get_prev(), fil_page_get_next(), fil_addr_is_null(): Remove.
buf_flush_page(): Add a fil_space_t* parameter. Minimize the
buf_pool.mutex hold time. buf_pool.n_flush[] is no longer updated
atomically with the io_fix, and we will protect most buf_block_t
fields with buf_block_t::lock. The function
buf_flush_write_block_low() is removed and merged here.
buf_page_init_for_read(): Use static linkage. Initialize the newly
allocated block and acquire the exclusive buf_block_t::lock while not
holding any mutex.
IORequest::IORequest(): Remove the body. We only need to invoke
set_punch_hole() in buf_flush_page() and nowhere else.
buf_page_t::flush_type: Remove. Replaced by IORequest::flush_type.
This field is only used during a fil_io() call.
That function already takes IORequest as a parameter, so we had
better introduce for the rarely changing field.
buf_block_t::init(): Replaces buf_page_init().
buf_page_t::init(): Replaces buf_page_init_low().
buf_block_t::initialise(): Initialise many fields, but
keep the buf_page_t::state(). Both buf_pool_t::validate() and
buf_page_optimistic_get() requires that buf_page_t::in_file()
be protected atomically with buf_page_t::in_page_hash
and buf_page_t::in_LRU_list.
buf_page_optimistic_get(): Now that buf_block_t::mutex
no longer exists, we must check buf_page_t::io_fix()
after acquiring the buf_pool.page_hash lock, to detect
whether buf_page_init_for_read() has been initiated.
We will also check the io_fix() before acquiring hash_lock
in order to avoid unnecessary computation.
The field buf_block_t::modify_clock (protected by buf_block_t::lock)
allows buf_page_optimistic_get() to validate the block.
buf_page_t::real_size: Remove. It was only used while flushing
pages of page_compressed tables.
buf_page_encrypt(): Add an output parameter that allows us ot eliminate
buf_page_t::real_size. Replace a condition with debug assertion.
buf_page_should_punch_hole(): Remove.
buf_dblwr_t::add_to_batch(): Replaces buf_dblwr_add_to_batch().
Add the parameter size (to replace buf_page_t::real_size).
buf_dblwr_t::write_single_page(): Replaces buf_dblwr_write_single_page().
Add the parameter size (to replace buf_page_t::real_size).
fil_system_t::detach(): Replaces fil_space_detach().
Ensure that fil_validate() will not be violated even if
fil_system.mutex is released and reacquired.
fil_node_t::complete_io(): Renamed from fil_node_complete_io().
fil_node_t::close_to_free(): Replaces fil_node_close_to_free().
Avoid invoking fil_node_t::close() because fil_system.n_open
has already been decremented in fil_space_t::detach().
BUF_BLOCK_READY_FOR_USE: Remove. Directly use BUF_BLOCK_MEMORY.
BUF_BLOCK_ZIP_DIRTY: Remove. Directly use BUF_BLOCK_ZIP_PAGE,
and distinguish dirty pages by buf_page_t::oldest_modification().
BUF_BLOCK_POOL_WATCH: Remove. Use BUF_BLOCK_NOT_USED instead.
This state was only being used for buf_page_t that are in
buf_pool.watch.
buf_pool_t::watch[]: Remove pointer indirection.
buf_page_t::in_flush_list: Remove. It was set if and only if
buf_page_t::oldest_modification() is nonzero.
buf_page_decrypt_after_read(), buf_corrupt_page_release(),
buf_page_check_corrupt(): Change the const fil_space_t* parameter
to const fil_node_t& so that we can report the correct file name.
buf_page_monitor(): Declare as an ATTRIBUTE_COLD global function.
buf_page_io_complete(): Split to buf_page_read_complete() and
buf_page_write_complete().
buf_dblwr_t::in_use: Remove.
buf_dblwr_t::buf_block_array: Add IORequest::flush_t.
buf_dblwr_sync_datafiles(): Remove. It was a useless wrapper of
os_aio_wait_until_no_pending_writes().
buf_flush_write_complete(): Declare static, not global.
Add the parameter IORequest::flush_t.
buf_flush_freed_page(): Simplify the code.
recv_sys_t::flush_lru: Renamed from flush_type and changed to bool.
fil_read(), fil_write(): Replaced with direct use of fil_io().
fil_buffering_disabled(): Remove. Check srv_file_flush_method directly.
fil_mutex_enter_and_prepare_for_io(): Return the resolved
fil_space_t* to avoid a duplicated lookup in the caller.
fil_report_invalid_page_access(): Clean up the parameters.
fil_io(): Return fil_io_t, which comprises fil_node_t and error code.
Always invoke fil_space_t::acquire_for_io() and let either the
sync=true caller or fil_aio_callback() invoke
fil_space_t::release_for_io().
fil_aio_callback(): Rewrite to replace buf_page_io_complete().
fil_check_pending_operations(): Remove a parameter, and remove some
redundant lookups.
fil_node_close_to_free(): Wait for n_pending==0. Because we no longer
do an extra lookup of the tablespace between fil_io() and the
completion of the operation, we must give fil_node_t::complete_io() a
chance to decrement the counter.
fil_close_tablespace(): Remove unused parameter trx, and document
that this is only invoked during the error handling of IMPORT TABLESPACE.
row_import_discard_changes(): Merged with the only caller,
row_import_cleanup(). Do not lock up the data dictionary while
invoking fil_close_tablespace().
logs_empty_and_mark_files_at_shutdown(): Do not invoke
fil_close_all_files(), to avoid a !needs_flush assertion failure
on fil_node_t::close().
innodb_shutdown(): Invoke os_aio_free() before fil_close_all_files().
fil_close_all_files(): Invoke fil_flush_file_spaces()
to ensure proper durability.
thread_pool::unbind(): Fix a crash that would occur on Windows
after srv_thread_pool->disable_aio() and os_file_close().
This fix was submitted by Vladislav Vaintroub.
Thanks to Matthias Leich and Axel Schwenke for extensive testing,
Vladislav Vaintroub for helpful comments, and Eugene Kosov for a review.
Introduce a new ATTRIBUTE_NOINLINE to
ib::logger member functions, and add UNIV_UNLIKELY hints to callers.
Also, remove some crash reporting output. If needed, the
information will be available using debugging tools.
Furthermore, remove some fts_enable_diag_print output that included
indexed words in raw form. The code seemed to assume that words are
NUL-terminated byte strings. It is not clear whether a NUL terminator
is always guaranteed to be present. Also, UCS2 or UTF-16 strings would
typically contain many NUL bytes.
commit 3a37644a29 added a non-POD
member buf_page_info_t::id, and thus GCC 7 or later would complain
about a memset() call. Let my_malloc fill the memory for us.
commit 8ccb3caafb micro-optimized
page_id_t as a wrapper of uint64_t.
buf_dump_t: Remove, and replace with page_id_t, which uses
exactly the same encoding.
buf_page_info_t: Replace space_id,page_num with page_id_t id.
i_s_innodb_set_page_type(): Remove unnecessary code.
The buf_page_info_t::id was already assigned at the start
of the only caller, i_s_innodb_buffer_page_get_info().
Thanks to MDEV-15058, there is only one InnoDB buffer pool.
Allocating buf_pool statically removes one level of pointer indirection
and makes code more readable, and removes the awkward initialization of
some buf_pool members.
While doing this, we will also declare some buf_pool_t data members
private and replace some functions with member functions. This is
mostly affecting buffer pool resizing.
This is not aiming to be a complete rewrite of buf_pool_t to
a proper class. Most of the buffer pool interface, such as
buf_page_get_gen(), will remain in the C programming style
for now.
buf_pool_t::withdrawing: Replaces buf_pool_withdrawing.
buf_pool_t::withdraw_clock_: Replaces buf_withdraw_clock.
buf_pool_t::create(): Repalces buf_pool_init().
buf_pool_t::close(): Replaces buf_pool_free().
buf_bool_t::will_be_withdrawn(): Replaces buf_block_will_be_withdrawn(),
buf_frame_will_be_withdrawn().
buf_pool_t::clear_hash_index(): Replaces buf_pool_clear_hash_index().
buf_pool_t::get_n_pages(): Replaces buf_pool_get_n_pages().
buf_pool_t::validate(): Replaces buf_validate().
buf_pool_t::print(): Replaces buf_print().
buf_pool_t::block_from_ahi(): Replaces buf_block_from_ahi().
buf_pool_t::is_block_field(): Replaces buf_pointer_is_block_field().
buf_pool_t::is_block_mutex(): Replaces buf_pool_is_block_mutex().
buf_pool_t::is_block_lock(): Replaces buf_pool_is_block_lock().
buf_pool_t::is_obsolete(): Replaces buf_pool_is_obsolete().
buf_pool_t::io_buf: Make default-constructible.
buf_pool_t::io_buf::create(): Delayed 'constructor'
buf_pool_t::io_buf::close(): Early 'destructor'
HazardPointer: Make default-constructible. Define all member functions
inline, also for derived classes.
All tablespace metadata is buffered in fil_system. There is a LRU
mechanism, but that only controls the opening and closing of
fil_node_t::handle.
It is much more efficient and less error-prone to access data file names
by looking up the fil_space_t object rather than by essentially joining
each row with an access to SYS_DATAFILES via the InnoDB internal SQL parser.
dict_get_first_path(): Declare static. The function may only be needed
when loading or updating the data dictionary. Also, change a condition
in order to avoid a bogus GCC 10 -Wstringop-overflow warning for
mem_strdupl() about len==ULINT_UNDEFINED.
i_s_sys_tablespaces_fill_table(): Do not access other InnoDB internal
dictionary tables than SYS_TABLESPACES.
The -Wconversion in GCC seems to be stricter than in clang.
GCC at least since version 4.4.7 issues truncation warnings for
assignments to bitfields, while clang 10 appears to only issue
warnings when the sizes in bytes rounded to the nearest integer
powers of 2 are different.
Before GCC 10.0.0, -Wconversion required more casts and would not
allow some operations, such as x<<=1 or x+=1 on a data type that
is narrower than int.
GCC 5 (but not GCC 4, GCC 6, or any later version) is complaining
about x|=y even when x and y are compatible types that are narrower
than int. Hence, we must rewrite some x|=y as
x=static_cast<byte>(x|y) or similar, or we must disable -Wconversion.
In GCC 6 and later, the warning for assigning wider to bitfields
that are narrower than 8, 16, or 32 bits can be suppressed by
applying a bitwise & with the exact bitmask of the bitfield.
For older GCC, we must disable -Wconversion for GCC 4 or 5 in such
cases.
The bitwise negation operator appears to promote short integers
to a wider type, and hence we must add explicit truncation casts
around them. Microsoft Visual C does not allow a static_cast to
truncate a constant, such as static_cast<byte>(1) truncating int.
Hence, we will use the constructor-style cast byte(~1) for such cases.
This has been tested at least with GCC 4.8.5, 5.4.0, 7.4.0, 9.2.1, 10.0.0,
clang 9.0.1, 10.0.0, and MSVC 14.22.27905 (Microsoft Visual Studio 2019)
on 64-bit and 32-bit targets (IA-32, AMD64, POWER 8, POWER 9, ARMv8).
The following parameters are deprecated:
innodb-background-scrub-data-uncompressed
innodb-background-scrub-data-compressed
innodb-background-scrub-data-interval
innodb-background-scrub-data-check-interval
Removed scrubbing code completely(btr0scrub.h, btr0scrub.cc)
Removed information_schema.innodb_tablespaces_scrubbing tables
Removed the scrubbing logic from fil_crypt_thread()
For compatibility with diagnostic software, let us
return a dummy buffer pool identifier 0 and restore
the columns that were initially deleted in
commit 1a6f708ec5:
information_schema.innodb_buffer_page.pool_id
information_schema.innodb_buffer_page_lru.pool_id
information_schema.innodb_buffer_pool_stats.pool_id
information_schema.innodb_cmpmem.buffer_pool_instance
information_schema.innodb_cmpmem_reset.buffer_pool_instance
Thanks to Vladislav Vaintroub for pointing this out.
Our benchmarking efforts indicate that the reasons for splitting the
buf_pool in commit c18084f71b
have mostly gone away, possibly as a result of
mysql/mysql-server@ce6109ebfd
or similar work.
Only in one write-heavy benchmark where the working set size is
ten times the buffer pool size, the buf_pool->mutex would be
less contended with 4 buffer pool instances than with 1 instance,
in buf_page_io_complete(). That contention could be alleviated
further by making more use of std::atomic and by splitting
buf_pool_t::mutex further (MDEV-15053).
We will deprecate and ignore the following parameters:
innodb_buffer_pool_instances
innodb_page_cleaners
There will be only one buffer pool and one page cleaner task.
In a number of INFORMATION_SCHEMA views, columns that indicated
the buffer pool instance will be removed:
information_schema.innodb_buffer_page.pool_id
information_schema.innodb_buffer_page_lru.pool_id
information_schema.innodb_buffer_pool_stats.pool_id
information_schema.innodb_cmpmem.buffer_pool_instance
information_schema.innodb_cmpmem_reset.buffer_pool_instance
The column INFORMATION_SCHEMA.INNODB_MUTEXES.NAME is not populated ever since
commit 2e814d4702 applied the InnoDB changes from
MySQL 5.7.9 to MariaDB Server 10.2.2.
Since the same commit, the view is only providing information about
rw_lock_t, not any mutexes.
For now, let us convert the source code file name and line number of
the rw_lock_t creation into a name. A better option in the future might
be to store the information somewhere where it can be looked up by
mysql_pfs_key_t, and possibly to remove the CREATE_FILE and CREATE_LINE
columns.
At each mini-transaction commit, the log sequence number of the
mini-transaction must be written to each modified page, so that
it will be available in the FIL_PAGE_LSN field when the page is
being read in crash recovery.
InnoDB was unnecessarily allocating redundant storage for the
field, in buf_page_t::newest_modification. Let us access
FIL_PAGE_LSN directly.
Furthermore, on ALTER TABLE...IMPORT TABLESPACE, let us write
0 to FIL_PAGE_LSN instead of using log_sys.lsn.
buf_flush_init_for_writing(), buf_flush_update_zip_checksum(),
fil_encrypt_buf_for_full_crc32(), fil_encrypt_buf(),
fil_space_encrypt(): Remove the parameter lsn.
buf_page_get_newest_modification(): Merge with the only caller.
buf_tmp_reserve_compression_buf(), buf_tmp_page_encrypt(),
buf_page_encrypt(): Define static in the same compilation unit
with the only caller.
PageConverter::m_current_lsn: Remove. Write 0 to FIL_PAGE_LSN
on ALTER TABLE...IMPORT TABLESPACE.
Shorten some VARCHAR attributes to a more reasonable length.
INNODB_METRICS: Rename the column STATUS to ENABLED, and make it Boolean.
Replace with INT(1) many Boolean attributes that were declared as VARCHAR
containing 'NO','YES','disabled','enabled','Uninitialized','Initialized'.
Replace some VARCHAR attributes with ENUM.
Replace some BIGINT with INT when 32 bits are sufficient.
Remove INNODB_SYS_TABLESPACES.SPACE_TYPE. The type of a tablespace
can be derived from the tablespace ID. A fixed number is used for
the system tablespace and the temporary tablespace. All other tablespaces
are single-table or single-partition tablespaces.
i_s_locks_row_t::lock_type, lock_get_type_str(): Remove.
This is a redundant field. Table and record locks can be
distinguished by whether i_s_locks_row_t::lock_index is NULL.
fill_trx_row(): Do not unnecessarily copy the constant strings that
trx->op_info is pointing to.
i_s_locks_row_t::lock_mode: Replace string with integer.
lock_get_mode_str(), lock_get_trx_id(), lock_get_trx(): Remove.
field_store_ulint(): Remove.
dict_table_t::stats_latch_created: remove along with related stuff
dict_table_t::stats_latch: make value member, not pointer. And always lock this
for simplicity, even to stats cloned table.
based on the work of Sergey Vojtovich
