Coding style: classes start with a capital letter.
Rename some classes related to parsing:
create_field -> Create_field
foreign_key -> Foreign_key
key_part_spec -> Key_part_spec
when logging is enabled.
Currently the partition engine doesn't allow log tables to
be partitioned. But this was not checked and the server crashed.
Fixed by adding a check in ALTER TABLE to disable partitioning the
log tables.
While working on the cause of the problem improved the way the log
thread structures are initialized before opening the log tables.
When constructing the path to the original .frm file ALTER .. RENAME
was unnecessary (and incorrectly) lowercasing the whole path when not
on a case-insensitive filesystem.
This path should not be modified because of lower_case_table_names
as it is already in the correct case according to that setting.
Fixed by removing the lowercasing.
Unfortunately testing this would require running the tests on a case
sensitive filesystem in a directory that has uppercase letters.
This cannot be guaranteed in all setups so no test case added.
SHOW CREATE TABLE fails
Underlying table names, that merge engine fails to open were not
reported.
With this fix CHECK TABLE issued against merge table reports all
underlying table names that it fails to open. Other statements
are unaffected, that is underlying table names are not included
into error message.
This fix doesn't solve SHOW CREATE TABLE issue.
While executing ALTER TABLE ... PARTITION the server uses
a temporary "shadow" table to create the updated table.
This shadow table then gets renamed as the original table.
The shadow table was not prefixed with the special prefix that
marks temporary tables so it was picked up by SHOW TABLE STATUS.
Fixed by isolating the code to create the shadow table name in a
separate function and prefixing the shadow table name with the
special prefix to exclude it from the list of user tables.
See bug 18775 and WL1324 for details.
To avoid unnecessary work the mysql_alter_table function takes the
list of table fields and applies all changes to it (drops/moves/renames/etc).
Then this function compares the new list and the old one. If the changes
require only .frm to be modified then the actual data isn't copied. To detect
changes all columns attributes but names are compared. When a column has been
moved and has replaced another column with the same attributes except name
the mysql_alter_table function wrongly decides that two fields has been just
renamed. As a result the data from the moved column and from all columns
after it is not copied.
Now the mysql_alter_table function forces table data copying by setting
the need_copy_table flag when it finds a moved column. The flag is set at
the stage when the modified fields are created.
Problem: we may create a deadlock committing changes in the mysql_alter_table() when
LOCK_open is set. Moreover, "in some variants of the ALTER TABLE commit
happens earlier, outside of LOCK_open, in other later - inside. It's no good, a storage
engine code that is called in between could expect a consistency - either there is a
transaction or there is not".
Fix: move the commit to happen earlier and outside of the LOCK_open.
The bug was repeated on MyISAM tables, so isn't InnoDB specific.
Reason of the bug is that partition-related members of TABLE_SHARE
wasn't properly updated after ALTER command. So if other thread doesn't
reread frm file, and just uses cached SHARE, it uses wrong data
Bug#4968 ""Stored procedure crash if cursor opened on altered table"
Bug#6895 "Prepared Statements: ALTER TABLE DROP COLUMN does nothing"
Bug#19182 "CREATE TABLE bar (m INT) SELECT n FROM foo; doesn't work from
stored procedure."
Bug#19733 "Repeated alter, or repeated create/drop, fails"
Bug#22060 "ALTER TABLE x AUTO_INCREMENT=y in SP crashes server"
Bug#24879 "Prepared Statements: CREATE TABLE (UTF8 KEY) produces a
growing key length" (this bug is not fixed in 5.0)
Re-execution of CREATE DATABASE, CREATE TABLE and ALTER TABLE
statements in stored routines or as prepared statements caused
incorrect results (and crashes in versions prior to 5.0.25).
In 5.1 the problem occured only for CREATE DATABASE, CREATE TABLE
SELECT and CREATE TABLE with INDEX/DATA DIRECTOY options).
The problem of bugs 4968, 19733, 19282 and 6895 was that functions
mysql_prepare_table, mysql_create_table and mysql_alter_table are not
re-execution friendly: during their operation they modify contents
of LEX (members create_info, alter_info, key_list, create_list),
thus making the LEX unusable for the next execution.
In particular, these functions removed processed columns and keys from
create_list, key_list and drop_list. Search the code in sql_table.cc
for drop_it.remove() and similar patterns to find evidence.
The fix is to supply to these functions a usable copy of each of the
above structures at every re-execution of an SQL statement.
To simplify memory management, LEX::key_list and LEX::create_list
were added to LEX::alter_info, a fresh copy of which is created for
every execution.
The problem of crashing bug 22060 stemmed from the fact that the above
metnioned functions were not only modifying HA_CREATE_INFO structure
in LEX, but also were changing it to point to areas in volatile memory
of the execution memory root.
The patch solves this problem by creating and using an on-stack
copy of HA_CREATE_INFO in mysql_execute_command.
Additionally, this patch splits the part of mysql_alter_table
that analizes and rewrites information from the parser into
a separate function - mysql_prepare_alter_table, in analogy with
mysql_prepare_table, which is renamed to mysql_prepare_create_table.
Bug #23667 "CREATE TABLE LIKE is not isolated from alteration
by other connections"
Bug #18950 "CREATE TABLE LIKE does not obtain LOCK_open"
As well as:
Bug #25578 "CREATE TABLE LIKE does not require any privileges
on source table".
The first and the second bugs resulted in various errors and wrong
binary log order when one tried to execute concurrently CREATE TABLE LIKE
statement and DDL statements on source table or DML/DDL statements on its
target table.
The problem was caused by incomplete protection/table-locking against
concurrent statements implemented in mysql_create_like_table() routine.
We solve it by simply implementing such protection in proper way.
Most of actual work for 5.1 was already done by fix for bug 20662 and
preliminary patch changing locking in ALTER TABLE.
The third bug allowed user who didn't have any privileges on table create
its copy and therefore circumvent privilege check for SHOW CREATE TABLE.
This patch solves this problem by adding privilege check, which was missing.
Finally it also removes some duplicated code from mysql_create_like_table()
and thus fixes bug #26869 "TABLE_LIST::table_name_length inconsistent with
TABLE_LIST::table_name".
Bug #23667 "CREATE TABLE LIKE is not isolated from alteration
by other connections"
Bug #18950 "CREATE TABLE LIKE does not obtain LOCK_open"
As well as:
Bug #25578 "CREATE TABLE LIKE does not require any privileges
on source table".
The first and the second bugs resulted in various errors and wrong
binary log order when one tried to execute concurrently CREATE TABLE LIKE
statement and DDL statements on source table or DML/DDL statements on its
target table.
The problem was caused by incomplete protection/table-locking against
concurrent statements implemented in mysql_create_like_table() routine.
We solve it by simply implementing such protection in proper way (see
comment for sql_table.cc for details).
The third bug allowed user who didn't have any privileges on table create
its copy and therefore circumvent privilege check for SHOW CREATE TABLE.
This patch solves this problem by adding privilege check, which was missing.
Finally it also removes some duplicated code from mysql_create_like_table().
Note that, altough tests covering concurrency-related aspects of CREATE TABLE
LIKE behaviour will only be introduced in 5.1, they were run manually for
this patch as well.
mode.
When a new DATE/DATETIME field without default value is being added by the
ALTER TABLE the '0000-00-00' value is used as the default one. But it wasn't
checked whether such value was allowed by the set sql mode. Due to this
'0000-00-00' values was allowed for DATE/DATETIME fields even in the
NO_ZERO_DATE mode.
Now the mysql_alter_table() function checks whether the '0000-00-00' value
is allowed for DATE/DATETIME fields by the set sql mode.
The new error_if_not_empty flag is used in the mysql_alter_table() function
to indicate that it should abort if the table being altered isn't empty.
The new new_datetime_field field is used in the mysql_alter_table() function
for error throwing purposes.
The new error_if_not_empty parameter is added to the copy_data_between_tables()
function to indicate the it should return error if the source table isn't empty.
and invalidation in the most general case (non-temporary table and
not simple RENAME or ENABLE/DISABLE KEYS or partitioning command).
See comment for sql/sql_table.cc for more information.
These changes are prerequisite for 5.1 version of fix for bug #23667
"CREATE TABLE LIKE is not isolated from alteration by other connections"
TABLES" and failures of alter_table.test on Windows which occured after
pushing fix for bugs #20662, #20903, #24508, #24738 (various problems
with CREATE TABLE SELECT).
ALTER TABLE statements which were handled using "fast" alter table
optimization were not properly working under LOCK TABLES if table
was transactional (for all table types under Windows).
Code implementing "fast" version of ALTER TABLE tried to open and
lock table using open_ltable() after renaming .FRM files (which
corresponds to renaming tables in normal case) in some cases
(for transactional tables or on Windows). This caused problems
under LOCK TABLES and conflicted with name-lock taken by
ALTER TABLE RENAME on target tables.
This patch solves this issue by using reopen_name_locked_table()
instead of open_ltable().
Bug #20662 "Infinite loop in CREATE TABLE IF NOT EXISTS ... SELECT
with locked tables"
Bug #20903 "Crash when using CREATE TABLE .. SELECT and triggers"
Bug #24738 "CREATE TABLE ... SELECT is not isolated properly"
Bug #24508 "Inconsistent results of CREATE TABLE ... SELECT when
temporary table exists"
Deadlock occured when one tried to execute CREATE TABLE IF NOT
EXISTS ... SELECT statement under LOCK TABLES which held
read lock on target table.
Attempt to execute the same statement for already existing
target table with triggers caused server crashes.
Also concurrent execution of CREATE TABLE ... SELECT statement
and other statements involving target table suffered from
various races (some of which might've led to deadlocks).
Finally, attempt to execute CREATE TABLE ... SELECT in case
when a temporary table with same name was already present
led to the insertion of data into this temporary table and
creation of empty non-temporary table.
All above problems stemmed from the old implementation of CREATE
TABLE ... SELECT in which we created, opened and locked target
table without any special protection in a separate step and not
with the rest of tables used by this statement.
This underminded deadlock-avoidance approach used in server
and created window for races. It also excluded target table
from prelocking causing problems with trigger execution.
The patch solves these problems by implementing new approach to
handling of CREATE TABLE ... SELECT for base tables.
We try to open and lock table to be created at the same time as
the rest of tables used by this statement. If such table does not
exist at this moment we create and place in the table cache special
placeholder for it which prevents its creation or any other usage
by other threads.
We still use old approach for creation of temporary tables.
Note that we have separate fix for 5.0 since there we use slightly
different less intrusive approach.
Bug #20662 "Infinite loop in CREATE TABLE IF NOT EXISTS ... SELECT
with locked tables"
Bug #20903 "Crash when using CREATE TABLE .. SELECT and triggers"
Bug #24738 "CREATE TABLE ... SELECT is not isolated properly"
Bug #24508 "Inconsistent results of CREATE TABLE ... SELECT when
temporary table exists"
Deadlock occured when one tried to execute CREATE TABLE IF NOT
EXISTS ... SELECT statement under LOCK TABLES which held
read lock on target table.
Attempt to execute the same statement for already existing
target table with triggers caused server crashes.
Also concurrent execution of CREATE TABLE ... SELECT statement
and other statements involving target table suffered from
various races (some of which might've led to deadlocks).
Finally, attempt to execute CREATE TABLE ... SELECT in case
when a temporary table with same name was already present
led to the insertion of data into this temporary table and
creation of empty non-temporary table.
All above problems stemmed from the old implementation of CREATE
TABLE ... SELECT in which we created, opened and locked target
table without any special protection in a separate step and not
with the rest of tables used by this statement.
This underminded deadlock-avoidance approach used in server
and created window for races. It also excluded target table
from prelocking causing problems with trigger execution.
The patch solves these problems by implementing new approach to
handling of CREATE TABLE ... SELECT for base tables.
We try to open and lock table to be created at the same time as
the rest of tables used by this statement. If such table does not
exist at this moment we create and place in the table cache special
placeholder for it which prevents its creation or any other usage
by other threads.
We still use old approach for creation of temporary tables.
Also note that we decided to postpone introduction of some tests
for concurrent behaviour of CREATE TABLE ... SELECT till 5.1.
The main reason for this is absence in 5.0 ability to set @@debug
variable at runtime, which can be circumvented only by using several
test files with individual .opt files. Since the latter is likely
to slowdown test-suite unnecessary we chose not to push this tests
into 5.0, but run them manually for this version and later push
their optimized version into 5.1
The following type conversions was done:
- Changed byte to uchar
- Changed gptr to uchar*
- Change my_string to char *
- Change my_size_t to size_t
- Change size_s to size_t
Removed declaration of byte, gptr, my_string, my_size_t and size_s.
Following function parameter changes was done:
- All string functions in mysys/strings was changed to use size_t
instead of uint for string lengths.
- All read()/write() functions changed to use size_t (including vio).
- All protocoll functions changed to use size_t instead of uint
- Functions that used a pointer to a string length was changed to use size_t*
- Changed malloc(), free() and related functions from using gptr to use void *
as this requires fewer casts in the code and is more in line with how the
standard functions work.
- Added extra length argument to dirname_part() to return the length of the
created string.
- Changed (at least) following functions to take uchar* as argument:
- db_dump()
- my_net_write()
- net_write_command()
- net_store_data()
- DBUG_DUMP()
- decimal2bin() & bin2decimal()
- Changed my_compress() and my_uncompress() to use size_t. Changed one
argument to my_uncompress() from a pointer to a value as we only return
one value (makes function easier to use).
- Changed type of 'pack_data' argument to packfrm() to avoid casts.
- Changed in readfrm() and writefrom(), ha_discover and handler::discover()
the type for argument 'frmdata' to uchar** to avoid casts.
- Changed most Field functions to use uchar* instead of char* (reduced a lot of
casts).
- Changed field->val_xxx(xxx, new_ptr) to take const pointers.
Other changes:
- Removed a lot of not needed casts
- Added a few new cast required by other changes
- Added some cast to my_multi_malloc() arguments for safety (as string lengths
needs to be uint, not size_t).
- Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
explicitely as this conflict was often hided by casting the function to
hash_get_key).
- Changed some buffers to memory regions to uchar* to avoid casts.
- Changed some string lengths from uint to size_t.
- Changed field->ptr to be uchar* instead of char*. This allowed us to
get rid of a lot of casts.
- Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
- Include zlib.h in some files as we needed declaration of crc32()
- Changed MY_FILE_ERROR to be (size_t) -1.
- Changed many variables to hold the result of my_read() / my_write() to be
size_t. This was needed to properly detect errors (which are
returned as (size_t) -1).
- Removed some very old VMS code
- Changed packfrm()/unpackfrm() to not be depending on uint size
(portability fix)
- Removed windows specific code to restore cursor position as this
causes slowdown on windows and we should not mix read() and pread()
calls anyway as this is not thread safe. Updated function comment to
reflect this. Changed function that depended on original behavior of
my_pwrite() to itself restore the cursor position (one such case).
- Added some missing checking of return value of malloc().
- Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
- Changed type of table_def::m_size from my_size_t to ulong to reflect that
m_size is the number of elements in the array, not a string/memory
length.
- Moved THD::max_row_length() to table.cc (as it's not depending on THD).
Inlined max_row_length_blob() into this function.
- More function comments
- Fixed some compiler warnings when compiled without partitions.
- Removed setting of LEX_STRING() arguments in declaration (portability fix).
- Some trivial indentation/variable name changes.
- Some trivial code simplifications:
- Replaced some calls to alloc_root + memcpy to use
strmake_root()/strdup_root().
- Changed some calls from memdup() to strmake() (Safety fix)
- Simpler loops in client-simple.c
- The function build_table_filename() builds up a string unconditionally
using the forward slash as a path separator. Later, when the string is
searched for FN_LIBCHAR by the set_up_table_before_create() function, a
null pointer is returned that is finally used by strlen in the
append_file_to_dir() function which causes the crash.
NO_AUTO_VALUE_ON_ZERO mode.
In the NO_AUTO_VALUE_ON_ZERO mode the table->auto_increment_field_not_null
variable is used to indicate that a non-NULL value was specified by the user
for an auto_increment column. When an INSERT .. ON DUPLICATE updates the
auto_increment field this variable is set to true and stays unchanged for the
next insert operation. This makes the next inserted row sometimes wrongly have
0 as the value of the auto_increment field.
Now the fill_record() function resets the table->auto_increment_field_not_null
variable before filling the record.
The table->auto_increment_field_not_null variable is also reset by the
open_table() function for a case if we missed some auto_increment_field_not_null
handling bug.
Now the table->auto_increment_field_not_null is reset at the end of the
mysql_load() function.
Reset the table->auto_increment_field_not_null variable after each
write_row() call in the copy_data_between_tables() function.
ARCHIVE table
ARCHIVE table was truncated by REPAIR TABLE ... USE_FRM statement.
The table handler returned its file name extensions in a wrong order.
REPAIR TABLE believed it has to use the meta file to create a new table
from it.
With the fixed order, REPAIR TABLE does now use the data file to create
a new table. So REPAIR TABLE ... USE_FRM works well with ARCHIVE engine
now.
This issue affects 5.0 only, since in 5.1 ARCHIVE engine stores meta
information and data in the same file.
thd->options' OPTION_STATUS_NO_TRANS_UPDATE bit was not restored at the end of SF() invocation, where
SF() modified non-ta table.
As the result of this artifact it was not possible to detect whether there were any side-effects when
top-level query ends.
If the top level query table was not modified and the bit is lost there would be no binlogging.
Fixed with preserving the bit inside of thd->no_trans_update struct. The struct agregates two bool flags
telling whether the current query and the current transaction modified any non-ta table.
The flags stmt, all are dropped at the end of the query and the transaction.
It was syntactically correct to define
spatial keys over parts of columns (e.g.
ALTER TABLE t1 ADD x GEOMETRY NOT NULL,
ADD SPATIAL KEY (x(32))).
This may lead to undefined results and/or
interpretation.
Fixed by not allowing partial column
specification in a SPATIAL index definition.
Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE.
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.
Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE.
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.
"Server Variables for Plugins"
Implement support for plugins to declare server variables.
Demonstrate functionality by removing InnoDB specific code from sql/*
New feature for HASH - HASH_UNIQUE flag
New feature for DYNAMIC_ARRAY - initializer accepts preallocated ptr.
Completed support for plugin reference counting.
Fixed compile-pentium64 scripts
Fixed wrong estimate of update_with_key_prefix in sql-bench
Merge bk-internal.mysql.com:/home/bk/mysql-5.1 into mysql.com:/home/my/mysql-5.1
Fixed unsafe define of uint4korr()
Fixed that --extern works with mysql-test-run.pl
Small trivial cleanups
This also fixes a bug in counting number of rows that are updated when we have many simultanous queries
Move all connection handling and command exectuion main loop from sql_parse.cc to sql_connection.cc
Split handle_one_connection() into reusable sub functions.
Split create_new_thread() into reusable sub functions.
Added thread_scheduler; Preliminary interface code for future thread_handling code.
Use 'my_thread_id' for internal thread id's
Make thr_alarm_kill() to depend on thread_id instead of thread
Make thr_abort_locks_for_thread() depend on thread_id instead of thread
In store_globals(), set my_thread_var->id to be thd->thread_id.
Use my_thread_var->id as basis for my_thread_name()
The above changes makes the connection we have between THD and threads more soft.
Added a lot of DBUG_PRINT() and DBUG_ASSERT() functions
Fixed compiler warnings
Fixed core dumps when running with --debug
Removed setting of signal masks (was never used)
Made event code call pthread_exit() (portability fix)
Fixed that event code doesn't call DBUG_xxx functions before my_thread_init() is called.
Made handling of thread_id and thd->variables.pseudo_thread_id uniform.
Removed one common 'not freed memory' warning from mysqltest
Fixed a couple of usage of not initialized warnings (unlikely cases)
Suppress compiler warnings from bdb and (for the moment) warnings from ndb
to a single statement.
---
Bug#24795: SHOW PROFILE
Profiling is only partially functional on some architectures. Where
there is no getrusage() system call, presently Null values are
returned where it would be required. Notably, Windows needs some love
applied to make it as useful.
Syntax this adds:
SHOW PROFILES
SHOW PROFILE [types] [FOR QUERY n] [OFFSET n] [LIMIT n]
where "n" is an integer
and "types" is zero or many (comma-separated) of
"CPU"
"MEMORY" (not presently supported)
"BLOCK IO"
"CONTEXT SWITCHES"
"PAGE FAULTS"
"IPC"
"SWAPS"
"SOURCE"
"ALL"
It also adds a session variable (boolean) "profiling", set to "no"
by default, and (integer) profiling_history_size, set to 15 by
default.
This patch abstracts setting THDs' "proc_info" behind a macro that
can be used as a hook into the profiling code when profiling
support is compiled in. All future code in this line should use
that mechanism for setting thd->proc_info.
---
Tests are now set to omit the statistics.
---
Adds an Information_schema table, "profiling" for access to
"show profile" data.
---
Merge zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-community-3--bug24795
into zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-community
---
Fix merge problems.
---
Fixed one bug in the query_source being NULL.
Updated test results.
---
Include more thorough profiling tests.
Improve support for prepared statements.
Use session-specific query IDs, starting at zero.
---
Selecting from I_S.profiling is no longer quashed in profiling, as
requested by Giuseppe.
Limit the size of captured query text.
No longer log queries that are zero length.
can crash under load
Resizing a key cache while it was in heavy use could crash the
server. There were several race conditions.
I reworked some of the algorithms to fix the race conditions.
No test case. Repeating the crashes requires heavy concurrent
load on the key cache. A test script is attached to the bug report.
More explanations to the changes are contained in a text file
attached to the bug report.
Removed a lot of compiler warnings
Removed not used variables, functions and labels
Initialize some variables that could be used unitialized (fatal bugs)
%ll -> %l
tables' lock."
Execution of ALTER TABLE ... ENABLE KEYS on a table (which can take rather
long time) prevented concurrent execution of all statements using tables.
The problem was caused by the fact that we were holding LOCK_open mutex
during whole duration of this statement and particularly during call
to handler::enable_indexes(). This behavior was introduced as part of the
fix for bug 14262 "SP: DROP PROCEDURE|VIEW (maybe more) write to binlog
too late (race cond)"
The patch simply restores old behavior. Note that we can safely do this as
this operation takes exclusive lock (similar to name-lock) which blocks both
DML and DDL on the table being altered.
It also introduces mysql-test/include/wait_show_pattern.inc helper script
which is used to make test-case for this bug robust enough.
After fix for bug#21798 JOIN stores the pointer to the buffer for sorting
fields. It is used while sorting for grouping and for ordering. If ORDER BY
clause has more elements then the GROUP BY clause then a memory overrun occurs.
Now the length of the ORDER BY list is always passed to the
make_unireg_sortorder() function and it allocates buffer big enough to be
used for bigger list.
Fixed compiler warnings.
In set_var.cc, the code was not properly returning an error code
if close_cached_tables() failed.
In sql_tables.cc, the code was not returning properly an error code
if lock_table_names() failed.
Both cases are bugs, introduced in 5.1 only by recent changes.
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
Bug#4968 "Stored procedure crash if cursor opened on altered table"
Bug#19733 "Repeated alter, or repeated create/drop, fails"
Bug#19182 "CREATE TABLE bar (m INT) SELECT n FROM foo; doesn't work from
stored procedure."
Bug#6895 "Prepared Statements: ALTER TABLE DROP COLUMN does nothing"
Bug#22060 "ALTER TABLE x AUTO_INCREMENT=y in SP crashes server"
Test cases for bugs 4968, 19733, 6895 will be added in 5.0.
Re-execution of CREATE DATABASE, CREATE TABLE and ALTER TABLE
statements in stored routines or as prepared statements caused
incorrect results (and crashes in versions prior to 5.0.25).
In 5.1 the problem occured only for CREATE DATABASE, CREATE TABLE
SELECT and CREATE TABLE with INDEX/DATA DIRECTOY options).
The problem of bugs 4968, 19733, 19282 and 6895 was that functions
mysql_prepare_table, mysql_create_table and mysql_alter_table were not
re-execution friendly: during their operation they used to modify contents
of LEX (members create_info, alter_info, key_list, create_list),
thus making the LEX unusable for the next execution.
In particular, these functions removed processed columns and keys from
create_list, key_list and drop_list. Search the code in sql_table.cc
for drop_it.remove() and similar patterns to find evidence.
The fix is to supply to these functions a usable copy of each of the
above structures at every re-execution of an SQL statement.
To simplify memory management, LEX::key_list and LEX::create_list
were added to LEX::alter_info, a fresh copy of which is created for
every execution.
The problem of crashing bug 22060 stemmed from the fact that the above
metnioned functions were not only modifying HA_CREATE_INFO structure in
LEX, but also were changing it to point to areas in volatile memory of
the execution memory root.
The patch solves this problem by creating and using an on-stack
copy of HA_CREATE_INFO (note that code in 5.1 already creates and
uses a copy of this structure in mysql_create_table()/alter_table(),
but this approach didn't work well for CREATE TABLE SELECT statement).
with other alterations causes lost tables
Using RENAME clause combined with other clauses of ALTER TABLE led to
data loss (the data was there but not accessible). This could happen if the
changes do not change the table much. Adding and droppping of fields and
indices was safe. Renaming a column with MODIFY or CHANGE was unsafe operation,
if the actual column didn't change (changing from int to int, which is a noop)
Depending on the storage engine (SE) the behavior is different:
1)MyISAM/MEMORY - the ALTER TABLE statement completes
without any error but next SELECT against the new table fails.
2)InnoDB (and every other transactional table) - The ALTER TABLE statement
fails. There are the the following files in the db dir -
`new_table_name.frm` and a temporary table's frm. If the SE is file
based, then the data and index files will be present but with the old
names. What happens is that for InnoDB the table is not renamed in the
internal DDIC.
Fixed by adding additional call to mysql_rename_table() method, which should
not include FRM file rename, because it has been already done during file
names juggling.
- Removed not used variables
- Changed some ulong parameters/variables to ulonglong (possible serious bug)
- Added casts to get rid of safe assignment from longlong to long (and similar)
- Added casts to function parameters
- Fixed signed/unsigned compares
- Added some constructores to structures
- Removed some not portable constructs
Better fix for bug Bug #21428 "skipped 9 bytes from file: socket (3)" on "mysqladmin shutdown"
(Added new parameter to net_clear() to define when we want the communication buffer to be emptied)
ALTER TABLE DISABLE KEYS doesn't work when modifying the table
ENABLE|DISABLE KEYS combined with another ALTER TABLE option, different
than RENAME TO did nothing. Also, if the table had disabled keys
and was ALTER-ed then the end table was with enabled keys.
Fixed by checking whether the table had disabled keys and enabling them
in the copied table.
Added missing DBUG_RETURN statements (in mysqldump.c)
Added missing enums
Fixed a lot of wrong DBUG_PRINT() statements, some of which could cause crashes
Removed usage of %lld and %p in printf strings as these are not portable or produces different results on different systems.
(this is the 5.0 patch, because 4.1 differs)
There was an improper order of doing chained operations.
To the documentor: ENABLE|DISABLE KEYS combined with RENAME TO, and no other
ALTER TABLE clause, leads to server crash independent of the presence of
indices and data in the table.
There was an improper order of doing chained operations.
To the documentor: ENABLE|DISABLE KEYS combined with RENAME TO, and no other
ALTER TABLE clause, leads to server crash independent of the presence of
indices and data in the table.
This is a performance issue for queries with subqueries evaluation
of which requires filesort.
Allocation of memory for the sort buffer at each evaluation of a
subquery may take a significant amount of time if the buffer is rather big.
With the fix we allocate the buffer at the first evaluation of the
subquery and reuse it at each subsequent evaluation.
list using a function
When executing dependent subqueries they are re-inited and re-exec() for
each row of the outer context.
The cause for the bug is that during subquery reinitialization/re-execution,
the optimizer reallocates JOIN::join_tab, JOIN::table in make_simple_join()
and the local variable in 'sortorder' in create_sort_index(), which is
allocated by make_unireg_sortorder().
Care must be taken not to allocate anything into the thread's memory pool
while re-initializing query plan structures between subquery re-executions.
All such items mush be cached and reused because the thread's memory pool
is freed at the end of the whole query.
Note that they must be cached and reused even for queries that are not
otherwise cacheable because otherwise it will grow the thread's memory
pool every time a cacheable query is re-executed.
We provide additional members to the JOIN structure to store references
to the items that need to be cached.
The mysql_alter_table() was able to rename only a table.
The view/table renaming code is moved from the function rename_tables
to the new function called do_rename().
The mysql_alter_table() function calls it when it needs to rename a view.
Bug #21785 "Server crashes after rename of the log table" and
Bug #21966 "Strange warnings on create like/repair of the log
tables"
According to the patch, from now on, one should use RENAME to
perform a log table rotation (this should also be reflected in
the manual).
Here is a sample:
use mysql;
CREATE TABLE IF NOT EXISTS general_log2 LIKE general_log;
RENAME TABLE general_log TO general_log_backup, general_log2 TO general_log;
The rules for Rename of the log tables are following:
IF 1. Log tables are enabled
AND 2. Rename operates on the log table and nothing is being
renamed to the log table.
DO 3. Throw an error message.
ELSE 4. Perform rename.
The very RENAME query will go the the old (backup) table. This is
consistent with the behavoiur we have with binlog ROTATE LOGS
statement.
Other problems, which are solved by the patch are:
1) Now REPAIR of the log table is exclusive operation (as it should be), this
also eliminates lock-related warnings. and
2) CREATE LIKE TABLE now usese usual read lock on the source table rather
then name lock, which is too restrictive. This way we get rid of another
log table-related warning, which occured because of the above fact
(as a side-effect, name lock resulted in a warning).
(race cond)
It was possible for one thread to interrupt a Data Definition Language
statement and thereby get messages to the binlog out of order. Consider:
Connection 1: Drop Foo x
Connection 2: Create or replace Foo x
Connection 2: Log "Create or replace Foo x"
Connection 1: Log "Drop Foo x"
Local end would have Foo x, but the replicated slaves would not.
The fix for this is to wrap all DDL and logging of a kind in the same mutex.
Since we already use mutexes for the various parts of altering the server,
this only entails moving the logging events down close to the action, inside
the mutex protection.
In practice this means that handlerton is now created by the server and is passed to the engine. Plugin startups can now also control how plugins are inited (and can optionally pass values). Bit more flexibility to those who want to write plugin interfaces to the database.
Bug #18559 "log tables cannot change engine, and
gets deadlocked when dropping w/ log on":
1) Add more generic error messages
2) Add new handlerton flag for engines, which support
log tables
3) Remove (log-tables related) mutex lock in myisam to
improve performance
The problem was that during DROP TEMPORARY TABLE we tried to acquire
the name lock, though temporary tables belongs to one connection, and
no race is possible.
The solution is to not use table name locking while executing
DROP TEMPORARY TABLE.
- if there are two character set definitions in the column declaration,
we replace the first one with the second one as we store both in the LEX->charset
slot. Add a separate slot to the LEX structure to store underscore charset.
- convert default values to the column charset of STRING, VARSTRING fields
if necessary as well.
we didn't check for NULL value of the
lex_create_info->db_type pointer.
The pointer is NULL in the case, when the engine name is
unknown to the server. This happens with NDB on Windows.
gets deadlocked when dropping w/ log on"
Log tables rely on concurrent insert machinery to add data.
This means that log tables are always opened and locked by
special (artificial) logger threads. Because of this, the thread
which tries to drop a log table starts to wait for the table
to be unlocked. Which will happen only if the log table is disabled.
Alike situation happens if one tries to alter a log table.
However in addition to the problem above, alter table calls
check_if_locking_is_allowed() routine for the engine. The
routine does not allow alter for the log tables. So, alter
doesn't start waiting forever for logs to be disabled, but
returns with an error.
Another problem is that not all engines could be used for
the log tables. That's because they need concurrent insert.
In this patch we:
(1) Explicitly disallow to drop/alter a log table if it
is currently used by the logger.
(2) Update MyISAM to support log tables
(3) Allow to drop log tables/alter log tables if log is
disabled
At the same time we (4) Disallow to alter log tables to
unsupported engine (after this patch CSV and MyISAM are
alowed)
Recommit with review fixes.
Continued implementation of WL#1324 (table name to filename encoding)
The intermediate (not temporary) files of the new table
during ALTER TABLE was visible for SHOW TABLES. These
intermediate files are copies of the original table with
the changes done by ALTER TABLE. After all the data is
copied over from the original table, these files are renamed
to the original tables file names. So they are not temporary
files. They persist after ALTER TABLE, but just with another
name.
In 5.0 the intermediate files are invisible for SHOW TABLES
because all file names beginning with "#sql" were suppressed.
This failed since 5.1.6 because even temporary table names were
converted when making file names from them. The prefix became
converted to "@0023sql". Converting the prefix during SHOW TABLES
would suppress the listing of user tables that start with "#sql".
The solution of the problem is to continue the implementation of
the table name to file name conversion feature. One requirement
is to suppress the conversion for temporary table names.
This change is straightforward for real temporary tables as there
is a function that creates temporary file names.
But the generated path names are located in TMPDIR and have no
relation to the internal table name. This cannot be used for
ALTER TABLE. Its intermediate files need to be in the same
directory as the old table files. And it is necessary to be
able to deduce the same path from the same table name repeatedly.
Consequently the intermediate table files must be handled like normal
tables. Their internal names shall start with tmp_file_prefix
(#sql) and they shall not be converted like normal table names.
I added a flags parameter to all relevant functions that are
called from ALTER TABLE. It is used to suppress the conversion
for the intermediate table files.
The outcome is that the suppression of #sql in SHOW TABLES
works again. It does not suppress user tables as these are
converted to @0023sql on file level.
This patch does also fix ALTER TABLE ... RENAME, which could not
rename a table with non-ASCII characters in its name.
It does also fix the problem that a user could create a table like
`#sql-xxxx-yyyy`, where xxxx is mysqld's pid and yyyy is the thread
ID of some other thread, which prevented this thread from running
ALTER TABLE.
Some of the above problems are mentioned in Bug 1405, which can
be closed with this patch.
This patch does also contain some minor fixes for other forgotten
conversions. Still known problems are reported as bugs 21370,
21373, and 21387.
Fix for BUG#16676: Database CHARSET not used for stored procedures
The problem in BUG#16211 is that CHARSET-clause of the return type for
stored functions is just ignored.
The problem in BUG#16676 is that if character set is not explicitly
specified for sp-variable, the server character set is used instead
of the database one.
The fix has two parts:
- always store CHARSET-clause of the return type along with the
type definition in mysql.proc.returns column. "Always" means that
CHARSET-clause is appended even if it has not been explicitly
specified in CREATE FUNCTION statement (this affects BUG#16211 only).
Storing CHARSET-clause if it is not specified is essential to avoid
changing character set if the database character set is altered in
the future.
NOTE: this change is not backward compatible with the previous releases.
- use database default character set if CHARSET-clause is not explicitly
specified (this affects both BUG#16211 and BUG#16676).
NOTE: this also breaks backward compatibility.
this is a cleanup patch for our current auto_increment handling:
new names for auto_increment variables in THD, new methods to manipulate them
(see sql_class.h), some move into handler::, causing less backup/restore
work when executing substatements.
This makes the logic hopefully clearer, less work is is needed in
mysql_insert().
By cleaning up, using different variables for different purposes (instead
of one for 3 things...), we fix those bugs, which someone may want to fix
in 5.0 too:
BUG#20339 "stored procedure using LAST_INSERT_ID() does not replicate
statement-based"
BUG#20341 "stored function inserting into one auto_increment puts bad
data in slave"
BUG#19243 "wrong LAST_INSERT_ID() after ON DUPLICATE KEY UPDATE"
(now if a row is updated, LAST_INSERT_ID() will return its id)
and re-fixes:
BUG#6880 "LAST_INSERT_ID() value changes during multi-row INSERT"
(already fixed differently by Ramil in 4.1)
Test of documented behaviour of mysql_insert_id() (there was no test).
The behaviour changes introduced are:
- LAST_INSERT_ID() now returns "the first autogenerated auto_increment value
successfully inserted", instead of "the first autogenerated auto_increment
value if any row was successfully inserted", see auto_increment.test.
Same for mysql_insert_id(), see mysql_client_test.c.
- LAST_INSERT_ID() returns the id of the updated row if ON DUPLICATE KEY
UPDATE, see auto_increment.test. Same for mysql_insert_id(), see
mysql_client_test.c.
- LAST_INSERT_ID() does not change if no autogenerated value was successfully
inserted (it used to then be 0), see auto_increment.test.
- if in INSERT SELECT no autogenerated value was successfully inserted,
mysql_insert_id() now returns the id of the last inserted row (it already
did this for INSERT VALUES), see mysql_client_test.c.
- if INSERT SELECT uses LAST_INSERT_ID(X), mysql_insert_id() now returns X
(it already did this for INSERT VALUES), see mysql_client_test.c.
- NDB now behaves like other engines wrt SET INSERT_ID: with INSERT IGNORE,
the id passed in SET INSERT_ID is re-used until a row succeeds; SET INSERT_ID
influences not only the first row now.
Additionally, when unlocking a table we check that the thread is not keeping
a next_insert_id (as the table is unlocked that id is potentially out-of-date);
forgetting about this next_insert_id is done in a new
handler::ha_release_auto_increment().
Finally we prepare for engines capable of reserving finite-length intervals
of auto_increment values: we store such intervals in THD. The next step
(to be done by the replication team in 5.1) is to read those intervals from
THD and actually store them in the statement-based binary log. NDB
will be a good engine to test that.
NDB table".
SQL-layer was not marking fields which were used in triggers as such. As
result these fields were not always properly retrieved/stored by handler
layer. So one might got wrong values or lost changes in triggers for NDB,
Federated and possibly InnoDB tables.
This fix solves the problem by marking fields used in triggers
appropriately.
Also this patch contains the following cleanup of ha_ndbcluster code:
We no longer rely on reading LEX::sql_command value in handler in order
to determine if we can enable optimization which allows us to handle REPLACE
statement in more efficient way by doing replaces directly in write_row()
method without reporting error to SQL-layer.
Instead we rely on SQL-layer informing us whether this optimization
applicable by calling handler::extra() method with
HA_EXTRA_WRITE_CAN_REPLACE flag.
As result we no longer apply this optimzation in cases when it should not
be used (e.g. if we have on delete triggers on table) and use in some
additional cases when it is applicable (e.g. for LOAD DATA REPLACE).
Finally this patch includes fix for bug#20728 "REPLACE does not work
correctly for NDB table with PK and unique index".
This was yet another problem which was caused by improper field mark-up.
During row replacement fields which weren't explicity used in REPLACE
statement were not marked as fields to be saved (updated) so they have
retained values from old row version. The fix is to mark all table
fields as set for REPLACE statement. Note that in 5.1 we already solve
this problem by notifying handler that it should save values from all
fields only in case when real replacement happens.
Table comment: issue a warning(error in traditional mode) if length of comment > 60 symbols
Column comment: issue a warning(error in traditional mode) if length of comment > 255 symbols
Table 'comment' is changed from char* to LEX_STRING
Bug#19022 "Memory bug when switching db during trigger execution"
Bug#17199 "Problem when view calls function from another database."
Bug#18444 "Fully qualified stored function names don't work correctly in
SELECT statements"
Documentation note: this patch introduces a change in behaviour of prepared
statements.
This patch adds a few new invariants with regard to how THD::db should
be used. These invariants should be preserved in future:
- one should never refer to THD::db by pointer and always make a deep copy
(strmake, strdup)
- one should never compare two databases by pointer, but use strncmp or
my_strncasecmp
- TABLE_LIST object table->db should be always initialized in the parser or
by creator of the object.
For prepared statements it means that if the current database is changed
after a statement is prepared, the database that was current at prepare
remains active. This also means that you can not prepare a statement that
implicitly refers to the current database if the latter is not set.
This is not documented, and therefore needs documentation. This is NOT a
change in behavior for almost all SQL statements except:
- ALTER TABLE t1 RENAME t2
- OPTIMIZE TABLE t1
- ANALYZE TABLE t1
- TRUNCATE TABLE t1 --
until this patch t1 or t2 could be evaluated at the first execution of
prepared statement.
CURRENT_DATABASE() still works OK and is evaluated at every execution
of prepared statement.
Note, that in stored routines this is not an issue as the default
database is the database of the stored procedure and "use" statement
is prohibited in stored routines.
This patch makes obsolete the use of check_db_used (it was never used in the
old code too) and all other places that check for table->db and assign it
from THD::db if it's NULL, except the parser.
How this patch was created: THD::{db,db_length} were replaced with a
LEX_STRING, THD::db. All the places that refer to THD::{db,db_length} were
manually checked and:
- if the place uses thd->db by pointer, it was fixed to make a deep copy
- if a place compared two db pointers, it was fixed to compare them by value
(via strcmp/my_strcasecmp, whatever was approproate)
Then this intermediate patch was used to write a smaller patch that does the
same thing but without a rename.
TODO in 5.1:
- remove check_db_used
- deploy THD::set_db in mysql_change_db
See also comments to individual files.
Addendum fixes after changing the condition variable
for the global read lock.
The stress test suite revealed some deadlocks. Some were
related to the new condition variable (COND_global_read_lock)
and some were general problems with the global read lock.
It is now necessary to signal COND_global_read_lock whenever
COND_refresh is signalled.
We need to wait for the release of a global read lock if one
is set before every operation that requires a write lock.
But we must not wait if we have locked tables by LOCK TABLES.
After setting a global read lock a thread waits until all
write locks are released.
Changed test for functions if they are supported.
3 categories:
1) Fully supported
2) Supported for single character collations
3) Supported for binary collations
Changes that requires code changes in other code of other storage engines.
(Note that all changes are very straightforward and one should find all issues
by compiling a --debug build and fixing all compiler errors and all
asserts in field.cc while running the test suite),
- New optional handler function introduced: reset()
This is called after every DML statement to make it easy for a handler to
statement specific cleanups.
(The only case it's not called is if force the file to be closed)
- handler::extra(HA_EXTRA_RESET) is removed. Code that was there before
should be moved to handler::reset()
- table->read_set contains a bitmap over all columns that are needed
in the query. read_row() and similar functions only needs to read these
columns
- table->write_set contains a bitmap over all columns that will be updated
in the query. write_row() and update_row() only needs to update these
columns.
The above bitmaps should now be up to date in all context
(including ALTER TABLE, filesort()).
The handler is informed of any changes to the bitmap after
fix_fields() by calling the virtual function
handler::column_bitmaps_signal(). If the handler does caching of
these bitmaps (instead of using table->read_set, table->write_set),
it should redo the caching in this code. as the signal() may be sent
several times, it's probably best to set a variable in the signal
and redo the caching on read_row() / write_row() if the variable was
set.
- Removed the read_set and write_set bitmap objects from the handler class
- Removed all column bit handling functions from the handler class.
(Now one instead uses the normal bitmap functions in my_bitmap.c instead
of handler dedicated bitmap functions)
- field->query_id is removed. One should instead instead check
table->read_set and table->write_set if a field is used in the query.
- handler::extra(HA_EXTRA_RETRIVE_ALL_COLS) and
handler::extra(HA_EXTRA_RETRIEVE_PRIMARY_KEY) are removed. One should now
instead use table->read_set to check for which columns to retrieve.
- If a handler needs to call Field->val() or Field->store() on columns
that are not used in the query, one should install a temporary
all-columns-used map while doing so. For this, we provide the following
functions:
my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->read_set);
field->val();
dbug_tmp_restore_column_map(table->read_set, old_map);
and similar for the write map:
my_bitmap_map *old_map= dbug_tmp_use_all_columns(table, table->write_set);
field->val();
dbug_tmp_restore_column_map(table->write_set, old_map);
If this is not done, you will sooner or later hit a DBUG_ASSERT
in the field store() / val() functions.
(For not DBUG binaries, the dbug_tmp_restore_column_map() and
dbug_tmp_restore_column_map() are inline dummy functions and should
be optimized away be the compiler).
- If one needs to temporary set the column map for all binaries (and not
just to avoid the DBUG_ASSERT() in the Field::store() / Field::val()
methods) one should use the functions tmp_use_all_columns() and
tmp_restore_column_map() instead of the above dbug_ variants.
- All 'status' fields in the handler base class (like records,
data_file_length etc) are now stored in a 'stats' struct. This makes
it easier to know what status variables are provided by the base
handler. This requires some trivial variable names in the extra()
function.
- New virtual function handler::records(). This is called to optimize
COUNT(*) if (handler::table_flags() & HA_HAS_RECORDS()) is true.
(stats.records is not supposed to be an exact value. It's only has to
be 'reasonable enough' for the optimizer to be able to choose a good
optimization path).
- Non virtual handler::init() function added for caching of virtual
constants from engine.
- Removed has_transactions() virtual method. Now one should instead return
HA_NO_TRANSACTIONS in table_flags() if the table handler DOES NOT support
transactions.
- The 'xxxx_create_handler()' function now has a MEM_ROOT_root argument
that is to be used with 'new handler_name()' to allocate the handler
in the right area. The xxxx_create_handler() function is also
responsible for any initialization of the object before returning.
For example, one should change:
static handler *myisam_create_handler(TABLE_SHARE *table)
{
return new ha_myisam(table);
}
->
static handler *myisam_create_handler(TABLE_SHARE *table, MEM_ROOT *mem_root)
{
return new (mem_root) ha_myisam(table);
}
- New optional virtual function: use_hidden_primary_key().
This is called in case of an update/delete when
(table_flags() and HA_PRIMARY_KEY_REQUIRED_FOR_DELETE) is defined
but we don't have a primary key. This allows the handler to take precisions
in remembering any hidden primary key to able to update/delete any
found row. The default handler marks all columns to be read.
- handler::table_flags() now returns a ulonglong (to allow for more flags).
- New/changed table_flags()
- HA_HAS_RECORDS Set if ::records() is supported
- HA_NO_TRANSACTIONS Set if engine doesn't support transactions
- HA_PRIMARY_KEY_REQUIRED_FOR_DELETE
Set if we should mark all primary key columns for
read when reading rows as part of a DELETE
statement. If there is no primary key,
all columns are marked for read.
- HA_PARTIAL_COLUMN_READ Set if engine will not read all columns in some
cases (based on table->read_set)
- HA_PRIMARY_KEY_ALLOW_RANDOM_ACCESS
Renamed to HA_PRIMARY_KEY_REQUIRED_FOR_POSITION.
- HA_DUPP_POS Renamed to HA_DUPLICATE_POS
- HA_REQUIRES_KEY_COLUMNS_FOR_DELETE
Set this if we should mark ALL key columns for
read when when reading rows as part of a DELETE
statement. In case of an update we will mark
all keys for read for which key part changed
value.
- HA_STATS_RECORDS_IS_EXACT
Set this if stats.records is exact.
(This saves us some extra records() calls
when optimizing COUNT(*))
- Removed table_flags()
- HA_NOT_EXACT_COUNT Now one should instead use HA_HAS_RECORDS if
handler::records() gives an exact count() and
HA_STATS_RECORDS_IS_EXACT if stats.records is exact.
- HA_READ_RND_SAME Removed (no one supported this one)
- Removed not needed functions ha_retrieve_all_cols() and ha_retrieve_all_pk()
- Renamed handler::dupp_pos to handler::dup_pos
- Removed not used variable handler::sortkey
Upper level handler changes:
- ha_reset() now does some overall checks and calls ::reset()
- ha_table_flags() added. This is a cached version of table_flags(). The
cache is updated on engine creation time and updated on open.
MySQL level changes (not obvious from the above):
- DBUG_ASSERT() added to check that column usage matches what is set
in the column usage bit maps. (This found a LOT of bugs in current
column marking code).
- In 5.1 before, all used columns was marked in read_set and only updated
columns was marked in write_set. Now we only mark columns for which we
need a value in read_set.
- Column bitmaps are created in open_binary_frm() and open_table_from_share().
(Before this was in table.cc)
- handler::table_flags() calls are replaced with handler::ha_table_flags()
- For calling field->val() you must have the corresponding bit set in
table->read_set. For calling field->store() you must have the
corresponding bit set in table->write_set. (There are asserts in
all store()/val() functions to catch wrong usage)
- thd->set_query_id is renamed to thd->mark_used_columns and instead
of setting this to an integer value, this has now the values:
MARK_COLUMNS_NONE, MARK_COLUMNS_READ, MARK_COLUMNS_WRITE
Changed also all variables named 'set_query_id' to mark_used_columns.
- In filesort() we now inform the handler of exactly which columns are needed
doing the sort and choosing the rows.
- The TABLE_SHARE object has a 'all_set' column bitmap one can use
when one needs a column bitmap with all columns set.
(This is used for table->use_all_columns() and other places)
- The TABLE object has 3 column bitmaps:
- def_read_set Default bitmap for columns to be read
- def_write_set Default bitmap for columns to be written
- tmp_set Can be used as a temporary bitmap when needed.
The table object has also two pointer to bitmaps read_set and write_set
that the handler should use to find out which columns are used in which way.
- count() optimization now calls handler::records() instead of using
handler->stats.records (if (table_flags() & HA_HAS_RECORDS) is true).
- Added extra argument to Item::walk() to indicate if we should also
traverse sub queries.
- Added TABLE parameter to cp_buffer_from_ref()
- Don't close tables created with CREATE ... SELECT but keep them in
the table cache. (Faster usage of newly created tables).
New interfaces:
- table->clear_column_bitmaps() to initialize the bitmaps for tables
at start of new statements.
- table->column_bitmaps_set() to set up new column bitmaps and signal
the handler about this.
- table->column_bitmaps_set_no_signal() for some few cases where we need
to setup new column bitmaps but don't signal the handler (as the handler
has already been signaled about these before). Used for the momement
only in opt_range.cc when doing ROR scans.
- table->use_all_columns() to install a bitmap where all columns are marked
as use in the read and the write set.
- table->default_column_bitmaps() to install the normal read and write
column bitmaps, but not signaling the handler about this.
This is mainly used when creating TABLE instances.
- table->mark_columns_needed_for_delete(),
table->mark_columns_needed_for_delete() and
table->mark_columns_needed_for_insert() to allow us to put additional
columns in column usage maps if handler so requires.
(The handler indicates what it neads in handler->table_flags())
- table->prepare_for_position() to allow us to tell handler that it
needs to read primary key parts to be able to store them in
future table->position() calls.
(This replaces the table->file->ha_retrieve_all_pk function)
- table->mark_auto_increment_column() to tell handler are going to update
columns part of any auto_increment key.
- table->mark_columns_used_by_index() to mark all columns that is part of
an index. It will also send extra(HA_EXTRA_KEYREAD) to handler to allow
it to quickly know that it only needs to read colums that are part
of the key. (The handler can also use the column map for detecting this,
but simpler/faster handler can just monitor the extra() call).
- table->mark_columns_used_by_index_no_reset() to in addition to other columns,
also mark all columns that is used by the given key.
- table->restore_column_maps_after_mark_index() to restore to default
column maps after a call to table->mark_columns_used_by_index().
- New item function register_field_in_read_map(), for marking used columns
in table->read_map. Used by filesort() to mark all used columns
- Maintain in TABLE->merge_keys set of all keys that are used in query.
(Simplices some optimization loops)
- Maintain Field->part_of_key_not_clustered which is like Field->part_of_key
but the field in the clustered key is not assumed to be part of all index.
(used in opt_range.cc for faster loops)
- dbug_tmp_use_all_columns(), dbug_tmp_restore_column_map()
tmp_use_all_columns() and tmp_restore_column_map() functions to temporally
mark all columns as usable. The 'dbug_' version is primarily intended
inside a handler when it wants to just call Field:store() & Field::val()
functions, but don't need the column maps set for any other usage.
(ie:: bitmap_is_set() is never called)
- We can't use compare_records() to skip updates for handlers that returns
a partial column set and the read_set doesn't cover all columns in the
write set. The reason for this is that if we have a column marked only for
write we can't in the MySQL level know if the value changed or not.
The reason this worked before was that MySQL marked all to be written
columns as also to be read. The new 'optimal' bitmaps exposed this 'hidden
bug'.
- open_table_from_share() does not anymore setup temporary MEM_ROOT
object as a thread specific variable for the handler. Instead we
send the to-be-used MEMROOT to get_new_handler().
(Simpler, faster code)
Bugs fixed:
- Column marking was not done correctly in a lot of cases.
(ALTER TABLE, when using triggers, auto_increment fields etc)
(Could potentially result in wrong values inserted in table handlers
relying on that the old column maps or field->set_query_id was correct)
Especially when it comes to triggers, there may be cases where the
old code would cause lost/wrong values for NDB and/or InnoDB tables.
- Split thd->options flag OPTION_STATUS_NO_TRANS_UPDATE to two flags:
OPTION_STATUS_NO_TRANS_UPDATE and OPTION_KEEP_LOG.
This allowed me to remove some wrong warnings about:
"Some non-transactional changed tables couldn't be rolled back"
- Fixed handling of INSERT .. SELECT and CREATE ... SELECT that wrongly reset
(thd->options & OPTION_STATUS_NO_TRANS_UPDATE) which caused us to loose
some warnings about
"Some non-transactional changed tables couldn't be rolled back")
- Fixed use of uninitialized memory in ha_ndbcluster.cc::delete_table()
which could cause delete_table to report random failures.
- Fixed core dumps for some tests when running with --debug
- Added missing FN_LIBCHAR in mysql_rm_tmp_tables()
(This has probably caused us to not properly remove temporary files after
crash)
- slow_logs was not properly initialized, which could maybe cause
extra/lost entries in slow log.
- If we get an duplicate row on insert, change column map to read and
write all columns while retrying the operation. This is required by
the definition of REPLACE and also ensures that fields that are only
part of UPDATE are properly handled. This fixed a bug in NDB and
REPLACE where REPLACE wrongly copied some column values from the replaced
row.
- For table handler that doesn't support NULL in keys, we would give an error
when creating a primary key with NULL fields, even after the fields has been
automaticly converted to NOT NULL.
- Creating a primary key on a SPATIAL key, would fail if field was not
declared as NOT NULL.
Cleanups:
- Removed not used condition argument to setup_tables
- Removed not needed item function reset_query_id_processor().
- Field->add_index is removed. Now this is instead maintained in
(field->flags & FIELD_IN_ADD_INDEX)
- Field->fieldnr is removed (use field->field_index instead)
- New argument to filesort() to indicate that it should return a set of
row pointers (not used columns). This allowed me to remove some references
to sql_command in filesort and should also enable us to return column
results in some cases where we couldn't before.
- Changed column bitmap handling in opt_range.cc to be aligned with TABLE
bitmap, which allowed me to use bitmap functions instead of looping over
all fields to create some needed bitmaps. (Faster and smaller code)
- Broke up found too long lines
- Moved some variable declaration at start of function for better code
readability.
- Removed some not used arguments from functions.
(setup_fields(), mysql_prepare_insert_check_table())
- setup_fields() now takes an enum instead of an int for marking columns
usage.
- For internal temporary tables, use handler::write_row(),
handler::delete_row() and handler::update_row() instead of
handler::ha_xxxx() for faster execution.
- Changed some constants to enum's and define's.
- Using separate column read and write sets allows for easier checking
of timestamp field was set by statement.
- Remove calls to free_io_cache() as this is now done automaticly in ha_reset()
- Don't build table->normalized_path as this is now identical to table->path
(after bar's fixes to convert filenames)
- Fixed some missed DBUG_PRINT(.."%lx") to use "0x%lx" to make it easier to
do comparision with the 'convert-dbug-for-diff' tool.
Things left to do in 5.1:
- We wrongly log failed CREATE TABLE ... SELECT in some cases when using
row based logging (as shown by testcase binlog_row_mix_innodb_myisam.result)
Mats has promised to look into this.
- Test that my fix for CREATE TABLE ... SELECT is indeed correct.
(I added several test cases for this, but in this case it's better that
someone else also tests this throughly).
Lars has promosed to do this.
New prototype for get_auto_increment() (but new arguments not yet used), to be able
to reserve a finite interval of auto_increment values from cooperating engines.
A hint on how many values to reserve is found in handler::estimation_rows_to_insert,
filled by ha_start_bulk_insert(), new wrapper around start_bulk_insert().
NOTE: this patch changes nothing, for all engines. But it makes the API ready for those
engines which will want to do reservation.
More csets will come to complete WL#3146.
ALTER TABLE crashes
Executing fast alter table (one that doesn't need to copy data)
on tables created by mysql versions prior to 4.0.25 could result
in posterior server crash when accessing these tables.
There was a bug prior to mysql-4.0.25. Number of null fields was
calculated incorrectly. As a result frm and data files gets out of
sync after fast alter table. There is no way to determine by which
mysql version (in 4.0 and 4.1 branches) table was created, thus we
disable fast alter table for all tables created by mysql versions
prior to 5.0 branch.
See BUG#6236.
Bug#18282 "INFORMATION_SCHEMA.TABLES provides inconsistent info about invalid views"
This bug caused crashes or resulted in wrong data being returned
when one tried to obtain information from I_S tables about views
using stored functions.
It was caused by the fact that we were using LEX representing
statement which were doing select from I_S tables as active LEX
when contents of I_S table were built. So state of this LEX both
affected and was affected by open_tables() calls which happened
during this process. This resulted in wrong behavior and in
violations of some of invariants which caused crashes.
This fix tries to solve this problem by properly saving/resetting
and restoring part of LEX which affects and is affected by the
process of opening tables and views in get_all_tables() routine.
To simplify things we separated this part of LEX in a new class
and made LEX its descendant.
