Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153
Detailed revision comments:
r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:
(everything except the last white-space change was skipped as it is already
in branches/zip)
------------------------------------------------------------------------
r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
Changed paths:
M /branches/5.1/Makefile.am
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1:
Backport c6121 from branches/zip:
------------------------------------------------------------------------
r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
Changed paths:
M /branches/zip/mysql-test/innodb-autoinc.result
branches/zip: This test has been problematic for sometime now. The underlying
bug is that the data dictionaries get out of sync. In the AUTOINC code we
try and apply salve to the symptoms. In the past MySQL made some unrelated
change and the dictionaries stopped getting out of sync and this test started
to fail. Now, it seems they have reverted that changed and the test is
passing again. I suspect this is not he last time that this test will change.
------------------------------------------------------------------------
------------------------------------------------------------------------
r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
Changed paths:
M /branches/5.1/Makefile.am
branches/5.1:
Revert a change to Makefile.am that sneaked unnoticed in c6127.
------------------------------------------------------------------------
r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/ha_prototypes.h
M /branches/5.1/ut/ut0ut.c
branches/5.1: Port r6134 from branches/zip:
------------------------------------------------------------------------
r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
------------------------------------------------------------------------
innobase_print_identifier(): Replace with innobase_convert_name().
innobase_convert_identifier(): New function, called by innobase_convert_name().
------------------------------------------------------------------------
r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
Changed paths:
M /branches/5.1/CMakeLists.txt
branches/5.1:
Followup to r5700: Adjust the changes so they are the same as in the BZR
repository.
------------------------------------------------------------------------
r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
Merge a part of r2911.5.5 from MySQL:
(the other part of this was merged in c5700)
------------------------------------------------------------
revno: 2911.5.5
committer: Vladislav Vaintroub <vvaintroub@mysql.com>
branch nick: 5.1-innodb_plugin
timestamp: Wed 2009-06-10 10:59:49 +0200
message:
Backport WL#3653 to 5.1 to enable bundled innodb plugin.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
removed:
storage/innodb_plugin/handler/handler0vars.h
storage/innodb_plugin/handler/win_delay_loader.cc
added:
storage/mysql_storage_engine.cmake
win/create_def_file.js
modified:
CMakeLists.txt
include/m_ctype.h
include/my_global.h
include/my_sys.h
include/mysql/plugin.h
libmysqld/CMakeLists.txt
mysql-test/mysql-test-run.pl
mysql-test/t/plugin.test
mysql-test/t/plugin_load-master.opt
mysys/charset.c
sql/CMakeLists.txt
sql/handler.h
sql/mysql_priv.h
sql/mysqld.cc
sql/sql_class.cc
sql/sql_class.h
sql/sql_list.h
sql/sql_profile.h
storage/Makefile.am
storage/archive/CMakeLists.txt
storage/blackhole/CMakeLists.txt
storage/csv/CMakeLists.txt
storage/example/CMakeLists.txt
storage/federated/CMakeLists.txt
storage/heap/CMakeLists.txt
storage/innobase/CMakeLists.txt
storage/innobase/handler/ha_innodb.cc
storage/innodb_plugin/CMakeLists.txt
storage/innodb_plugin/handler/ha_innodb.cc
storage/innodb_plugin/handler/handler0alter.cc
storage/innodb_plugin/handler/i_s.cc
storage/innodb_plugin/plug.in
storage/myisam/CMakeLists.txt
storage/myisammrg/CMakeLists.txt
win/Makefile.am
win/configure.js
------------------------------------------------------------------------
r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
White space fixup.
------------------------------------------------------------------------
1. BUG#48482 - innodb-autoinc.test fails with results difference
2. enable the disabled test
Detailed revision comments:
r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
branches/5.1: Fix autoinc failing test results.
(this should be skipped when merging 5.1 into zip)
- disabled main.innodb_bug47777.test with InnoDB plugin
until fix for plugin is applied.
- disabled main.innodb-autoinc.test (failing)
- re-enabled main.innodb_bug39438.test
- added error message suppression to innodb_bug39438, as
requested by InnoDB/Oracle
- reverted change to main.innodb_bug34300 as plugin specific.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
Had attempted to disable this test on Windows only, but the nature of this bug
does not allow for this. The master.opt file is processed before anything in
in the actual test. As a result, we must use disabled.def files to ensure
these tests are skipped on the problematic platforms.
Removed Windows-only code and updated the proper disabled.def files accordingly.
It turns out that this test case no longer fails with the discrepancy
in numbers that was the original cause for disabling this test (and showed
potential genuine issues with the query cache). Therefore
this test is being enabled after some minor adjustment of error codes and
messages.
Disabling these two tests as they are affected by this bug / causing PB2 failures
on Windows platforms. Can always disable via include/not_windows.inc if
the bug fix looks like it will take some time.
The problem is that select queries executed concurrently with
a concurrent insert on a MyISAM table could be cached if the
select started after the query cache invalidation but before
the unlock of tables performed by the concurrent insert. This
race could happen because the concurrent insert was failing
to prevent cache of select queries happening at the same time.
The solution is to add a 'uncacheable' status flag to signal
that a concurrent insert is being performed on the table and
that queries executing at the same time shouldn't cache the
results.
BUG#42383 2009-01-28 lsoares
"This fails in embedded and on windows. Note that this test is not run
on windows and on embedded in PB for main trees currently"
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
The test reacted on the way how mtr orders arguments for the server
that are gathered from different source. It appeared that the opt-file
options were parsed before those that supplied to mtr via its command
line. In effect, the opt-file preferences got overriden by the command
line and some tests, like no-threads, were caught by surprise: a test
expects an option value that had been "hardcoded" into its opt-file
but gets another one.
This server options ordering problem exists on in the new rpl trees
mtr. In option of the author of this patch, the opt-file shall be
considered as having the highest preference weight. The opt-file is
merely a part of the header of a test, namely a part that can not be
technically deployed along the test file.
It's unnatural for the test writer to provide both the opt file value
and a guard that guarantees the value will be set on in the run time.
It's logical to provide either one: the option and its value or the
guard.
Fixed with relocating parse of the opt file to be the last among
sources of the sever's options.
A side effect: fixing a small problem of resetting the suite options
at time the opt file starts parsing.
A side effect: main.log_bin_trust_function_creators_func is disabled to
be re-enabled with the fixes for bug#41003 will be merged from the main trees.
- remove totally wrong (syntax) entries from disabled.def
- remove entries belonging to deleted tests from disabled.def
- correct the comments (correct the bug mentioned) of entries in disabled.def
- remove never completed tests which were accidently pushed
BUG#39382: innodb_max_dirty_pages_pct_func failed with timeout on pushbuild
Disabled innodb_max_dirty_pages_pct_func.
Please re-enable if the test gets fixed.
- disable the test suffering from Bug#41098 Query Cache returns wrong result with
concurrent insert
- additional improvements
Details:
- Move the test for the historic bug
Bug 28249 Query Cache returns wrong result with concurrent insert / certain lock
into its own testscript query_cache_28249.test.
- query_cache.test:
- replace error numbers with error names
- remove trailing spaces, replace tabs with spaces
- reset of @@global.log_bin_trust_function_creators to its original value
at the end of the test
- query_cache_28249.test:
- replace sleep 5 with poll routine
- avoid random differences caused by concurrent_inserts effects
- improved comments and formatting
Re-enabling this test in 5.1 tree since the bug that caused disabling
(Bug#33696 CSV storage engine allows nullable colums via ALTER TABLE statements)
doesn't appear in 5.1 (6.0 only)
Recorded .result file and removed test from the main.disabled.def file.
Bug#39848 events_bugs fails sporadically on pushbuild
(missing rows in table event_log)
Details: Reimplement the subtest for BUG 28924
- check if the number of rows within the table
event_log changes but don't print rows
because the number varies depending on
load on testing box
- shift DROP USER befor DROP EVENT
= Subtest fits again to old bug
- remove no more needed comments + variables
Bug#39863 events_bugs fails sporadically on pushbuild
(extra processes in I_S.PROCESSLIST)
Details: Abort with appropriate message to the protocol if
release_lock() does not has the intended effect.
This cannot prevent problems caused by the probably
buggy release_lock() but it reveals if we had a
problem in this area.
Bug#39978 main.events_bugs does not clean up
Detail: Restore global.event_scheduler = ON at end of test
Bug#39569 events_bugs fails sporadically on pushbuild
(should have failed with errno 1539)
Detail: Set $wait_timeout to 4 instead of 2
- Fix two instabilities (result sets pulled from processlist in
subtest for bug 16407) which were found during tests with high
parallel I/O load
- Minor improvements of formatting
Details:
- Add comments
- Remove tabs and trailing blanks
- Add line breaks for better readability
- Updated slow_query_log_file_basic and general_log_file basis instead of the func version as
the func version run good but the basic versions fail.
- Sent innodb.test to dev@innodb.com.
- variables.test has differences probably due to a bug in mtr or in the SET statement (see bug#39369).
- general_log_file_basic.test and slow_query_log_file_bsaic.test have differences, which might be
produced by the new mtr (see bug#38124).
