bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
without error
When using quick access methods for searching rows in UPDATE or
DELETE there was no check if a fatal error was not already sent
to the client while evaluating the quick condition.
As a result a false OK (following the error) was sent to the
client and the error was thus transformed into a warning.
Fixed by checking for errors sent to the client during
SQL_SELECT::check_quick() and treating them as real errors.
Fixed a wrong test case in group_min_max.test
Fixed a wrong return code in mysql_update() and mysql_delete()
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
Certain multi-updates gave different results on InnoDB from
to MyISAM, due to on-the-fly updates being used on the former and
the update order matters.
Fixed by turning off on-the-fly updates when update order
dependencies are present.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
Documented behaviour was broken by the patch for bug 33699
that actually is not a bug.
This fix reverts patch for bug 33699 and reverts the
UPDATE of NOT NULL field with NULL query to old
behavior.
leads to an assertion failure
Any run-time error in stored function (like recursive function
call or update of table that is already updating by statement
which invoked this stored function etc.) that was used in some
expression of the single-table UPDATE statement caused an
assertion failure.
Multiple-table UPDATE (as well as INSERT and both single- and
multiple-table DELETE) are not affected.
enable uncacheable flag if we update a view with check option
and check option has a subselect, otherwise, the check option
can be evaluated after the subselect was freed as independent
(See full_local in JOIN::join_free())
derived table cause crash
When a multi-UPDATE command fails to lock some table, and
subsequently succeeds, the tables need to be reopened if
they were altered. But the reopening procedure failed for
derived tables.
Extra cleanup has been added.
``FLUSH TABLES WITH READ LOCK''
Concurrent execution of 1) multitable update with a
NATURAL/USING join and 2) a such query as "FLUSH TABLES
WITH READ LOCK" or "ALTER TABLE" of updating table led
to a server crash.
The mysql_multi_update_prepare() function call is optimized
to lock updating tables only, so it postpones locking to
the last, and if locking fails, it does cleanup of modified
syntax structures and repeats a query analysis. However,
that cleanup procedure was incomplete for NATURAL/USING join
syntax data: 1) some Field_item items pointed into freed
table structures, and 2) the TABLE_LIST::join_columns fields
was not reset.
Major change:
short-living Field *Natural_join_column::table_field has
been replaced with long-living Item*.
The problem is that when statement-based replication was enabled,
statements such as INSERT INTO .. SELECT FROM .. and CREATE TABLE
.. SELECT FROM need to grab a read lock on the source table that
does not permit concurrent inserts, which would in turn be denied
if the source table is a log table because log tables can't be
locked exclusively.
The solution is to not take such a lock when the source table is
a log table as it is unsafe to replicate log tables under statement
based replication. Furthermore, the read lock that does not permits
concurrent inserts is now only taken if statement-based replication
is enabled and if the source table is not a log table.
- In QUICK_INDEX_MERGE_SELECT::read_keys_and_merge: when we got table->sort from Unique,
tell init_read_record() not to use rr_from_cache() because a) rowids are already sorted
and b) it might be that the the data is used by filesort(), which will need record rowids
(which rr_from_cache() cannot provide).
- Fully de-initialize the table->sort read in QUICK_INDEX_MERGE_SELECT::get_next(). This fixes BUG#35477.
(bk trigger: file as fix for BUG#35478).
first row or fails with an error:
ERROR 1022 (23000): Can't write; duplicate key in table ''
The server uses intermediate temporary table to store updated
row data. The first column of this table contains rowid.
Current server implementation doesn't reset NULL flag of that
column even if the server fills a column with rowid.
To keep each rowid unique, there is an unique index.
An insertion into an unique index takes into account NULL
flag of key value and ignores real data if NULL flag is set.
So, insertion of actually different rowids may lead to two
kind of problems. Visible effect of each of these problems
depends on an initial engine type of temporary table:
1. If multiupdate initially creates temporary table as
a MyISAM table (a table contains blob columns, and the
create_tmp_table function assumes, that this table is
large), it inserts only one single row and updates
only rows with one corresponding rowid. Other rows are
silently ignored.
2. If multiupdate initially creates MEMORY temporary
table, fills it with data and reaches size limit for
MEMORY tables (max_heap_table_size), multiupdate
converts MEMORY table into MyISAM table and fails
with an error:
ERROR 1022 (23000): Can't write; duplicate key in table ''
Multiupdate has been fixed to update the NULL flag of
temporary table rowid columns.
