compatibility problems
Pages that are encrypted contain post encryption checksum on
different location that normal checksum fields. Therefore,
we should before decryption check this checksum to avoid
unencrypting corrupted pages. After decryption we can use
traditional checksum check to detect if page is corrupted
or unencryption was done using incorrect key.
Pages that are page compressed do not contain any checksum,
here we need to fist unencrypt, decompress and finally
use tradional checksum check to detect page corruption
or that we used incorrect key in unencryption.
buf0buf.cc: buf_page_is_corrupted() mofified so that
compressed pages are skipped.
buf0buf.h, buf_block_init(), buf_page_init_low():
removed unnecessary page_encrypted, page_compressed,
stored_checksum, valculated_checksum fields from
buf_page_t
buf_page_get_gen(): use new buf_page_check_corrupt() function
to detect corrupted pages.
buf_page_check_corrupt(): If page was not yet decrypted
check if post encryption checksum still matches.
If page is not anymore encrypted, use buf_page_is_corrupted()
traditional checksum method.
If page is detected as corrupted and it is not encrypted
we print corruption message to error log.
If page is still encrypted or it was encrypted and now
corrupted, we will print message that page is
encrypted to error log.
buf_page_io_complete(): use new buf_page_check_corrupt()
function to detect corrupted pages.
buf_page_decrypt_after_read(): Verify post encryption
checksum before tring to decrypt.
fil0crypt.cc: fil_encrypt_buf() verify post encryption
checksum and ind fil_space_decrypt() return true
if we really decrypted the page.
fil_space_verify_crypt_checksum(): rewrite to use
the method used when calculating post encryption
checksum. We also check if post encryption checksum
matches that traditional checksum check does not
match.
fil0fil.ic: Add missed page type encrypted and page
compressed to fil_get_page_type_name()
Note that this change does not yet fix innochecksum tool,
that will be done in separate MDEV.
Fix test failures caused by buf page corruption injection.
.. wsrep_max_ws_rows causes cluster to break when running
Galera cluster in TOI mode
Problem:
While copying records to temporary table during ALTER TABLE,
if there are more than wsrep_max_wsrep_rows records, the
command fails.
Fix:
Since, the temporary table records are not placed into the
binary log, wsrep_affected_rows must not be incremented.
Added a test.
that must not send a response
Problem:- When using wsrep (w/ galera) and issuing commands that can
cause deadlocks, deadlock exception errors are sent in responses to
commands such as close prepared statement and close connection which,
by spec, must not send a response.
Solution:- In dispatch_command, we will handle COM_QUIT and COM_STMT_CLOSE
commands even in case of error.
Patch Credit:- Jaka Močnik
As noted in MDEV-8841, any test that kills the server must issue
FLUSH TABLES, so that tables of crash-unsafe storage engines will
not be corrupted. Consistently issue this statement after any
call mtr.add_suppression() calls.
Also, do not invoke shutdown_server directly, but use helpers instead.
Do not kill the server after call mtr.add_suppression(), because
the procedure modifies a crash-unsafe table, and we do not want to
corrupt that table.
crashes server
This bug is the result of merging the Oracle MySQL follow-up fix
BUG#22963169 MYSQL CRASHES ON CREATE FULLTEXT INDEX
without merging the base bug fix:
Bug#79475 Insert a token of 84 4-bytes chars into fts index causes
server crash.
Unlike the above mentioned fixes in MySQL, our fix will not change
the storage format of fulltext indexes in InnoDB or XtraDB
when a character encoding with mbmaxlen=2 or mbmaxlen=3
and the length of a word is between 128 and 84*mbmaxlen bytes.
The Oracle fix would allocate 2 length bytes for these cases.
Compatibility with other MySQL and MariaDB releases is ensured by
persisting the used maximum length in the SYS_COLUMNS table in the
InnoDB data dictionary.
This fix also removes some unnecessary strcmp() calls when checking
for the legacy default collation my_charset_latin1
(my_charset_latin1.name=="latin1_swedish_ci").
fts_create_one_index_table(): Store the actual length in bytes.
This metadata will be written to the SYS_COLUMNS table.
fts_zip_initialize(): Initialize only the first byte of the buffer.
Actually the code should not even care about this first byte, because
the length is set as 0.
FTX_MAX_WORD_LEN: Define as HA_FT_MAXCHARLEN * 4 aka 336 bytes,
not as 254 bytes.
row_merge_create_fts_sort_index(): Set the actual maximum length of the
column in bytes, similar to fts_create_one_index_table().
row_merge_fts_doc_tokenize(): Remove the redundant parameter word_dtype.
Use the actual maximum length of the column. Calculate the extra_size
in the same way as row_merge_buf_encode() does.
recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.
recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.
[0-9]*[.]?[0-9]* wasn't a sufficient regex to cover the
%lg used in Json_writer::add_double. Exponent formats
where missed.
Here we normalize all the replace_regex expressions for
ANALYZE FORMAT=JSON into one include file.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Problem:- When setting max_binlog_stmt_cache_size=18446744073709547520
from either command line or .cnf file, server fails to start.
Solution:- Added one more function eval_num_suffix_ull , which uses
strtoull to get unsigned ulonglong from string. And getopt_ull calls this
function instead of eval_num_suffix. Also changed previous eval_num_suffix to
eval_num_suffix_ll to remain consistent.
Change default to zlib, this has effect only if user has
explicitly requested page compression and then user
naturally expects that pages are really compressed
if they can be compressed.
restarting server with encryption and read-only
buf0buf.cc: Temporary slots used in encryption was calculated
by read_threads * write_threads. However, in read-only mode
write_threads is zero. Correct way is to calculate
(read_threads + write_threads) * max pending IO requests.
check_that_all_fields_are_given_values() relied on write_set,
but was run too early, before triggers updated write_set.
also, when triggers are present, fields might get values conditionally,
so we need to check that all fields are given values for every row.
* Remove duplicate lines from tests
* Use thd instead of current_thd
* Remove extra wsrep_binlog_format_names
* Correctly merge union patch from 5.5 wrt duplicate rows.
* Correctly merge SELinux changes into 10.1
The function fsp_flags_try_adjust(), which is called on startup,
is incrementing the Innodb_pages0_read counts for every affected file.
Adjust the result of encryption.innodb_lotoftables accordingly.
innodb.doublewrite: Similar to what was done to innodb.101_compatibility,
add an explicit $_ parameter to the Perl unpack function.
Also, fix some diagnostic messages in the Perl code.
innodb.innodb-wl5522-debug: Adjust for the changed error codes and
messages on fault injection.
Apparently, in older versions of Perl unpack does not have a logic
for using $_ as a default value for the second argument. Fixed by
specifying it explicitly
MariaDB 10.0/MySQL 5.6 using innodb-page-size!=16K
The storage format of FSP_SPACE_FLAGS was accidentally broken
already in MariaDB 10.1.0. This fix is bringing the format in
line with other MySQL and MariaDB release series.
Please refer to the comments that were added to fsp0fsp.h
for details.
This is an INCOMPATIBLE CHANGE that affects users of
page_compression and non-default innodb_page_size. Upgrading
to this release will correct the flags in the data files.
If you want to downgrade to earlier MariaDB 10.1.x, please refer
to the test innodb.101_compatibility how to reset the
FSP_SPACE_FLAGS in the files.
NOTE: MariaDB 10.1.0 to 10.1.20 can misinterpret
uncompressed data files with innodb_page_size=4k or 64k as
compressed innodb_page_size=16k files, and then probably fail
when trying to access the pages. See the comments in the
function fsp_flags_convert_from_101() for detailed analysis.
Move PAGE_COMPRESSION to FSP_SPACE_FLAGS bit position 16.
In this way, compressed innodb_page_size=16k tablespaces will not
be mistaken for uncompressed ones by MariaDB 10.1.0 to 10.1.20.
Derive PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR from the
dict_table_t::flags when the table is available, in
fil_space_for_table_exists_in_mem() or fil_open_single_table_tablespace().
During crash recovery, fil_load_single_table_tablespace() will use
innodb_compression_level for the PAGE_COMPRESSION_LEVEL.
FSP_FLAGS_MEM_MASK: A bitmap of the memory-only fil_space_t::flags
that are not to be written to FSP_SPACE_FLAGS. Currently, these will
include PAGE_COMPRESSION_LEVEL, ATOMIC_WRITES and DATA_DIR.
Introduce the macro FSP_FLAGS_PAGE_SSIZE(). We only support
one innodb_page_size for the whole instance.
When creating a dummy tablespace for the redo log, use
fil_space_t::flags=0. The flags are never written to the redo log files.
Remove many FSP_FLAGS_SET_ macros.
dict_tf_verify_flags(): Remove. This is basically only duplicating
the logic of dict_tf_to_fsp_flags(), used in a debug assertion.
fil_space_t::mark: Remove. This flag was not used for anything.
fil_space_for_table_exists_in_mem(): Remove the unnecessary parameter
mark_space, and add a parameter for table flags. Check that
fil_space_t::flags match the table flags, and adjust the (memory-only)
flags based on the table flags.
fil_node_open_file(): Remove some redundant or unreachable conditions,
do not use stderr for output, and avoid unnecessary server aborts.
fil_user_tablespace_restore_page(): Convert the flags, so that the
correct page_size will be used when restoring a page from the
doublewrite buffer.
fil_space_get_page_compressed(), fsp_flags_is_page_compressed(): Remove.
It suffices to have fil_space_is_page_compressed().
FSP_FLAGS_WIDTH_DATA_DIR, FSP_FLAGS_WIDTH_PAGE_COMPRESSION_LEVEL,
FSP_FLAGS_WIDTH_ATOMIC_WRITES: Remove, because these flags do not
exist in the FSP_SPACE_FLAGS but only in memory.
fsp_flags_try_adjust(): New function, to adjust the FSP_SPACE_FLAGS
in page 0. Called by fil_open_single_table_tablespace(),
fil_space_for_table_exists_in_mem(), innobase_start_or_create_for_mysql()
except if --innodb-read-only is active.
fsp_flags_is_valid(ulint): Reimplement from the scratch, with
accurate comments. Do not display any details of detected
inconsistencies, because the output could be confusing when
dealing with MariaDB 10.1.x data files.
fsp_flags_convert_from_101(ulint): Convert flags from buggy
MariaDB 10.1.x format, or return ULINT_UNDEFINED if the flags
cannot be in MariaDB 10.1.x format.
fsp_flags_match(): Check the flags when probing files.
Implemented based on fsp_flags_is_valid()
and fsp_flags_convert_from_101().
dict_check_tablespaces_and_store_max_id(): Do not access the
page after committing the mini-transaction.
IMPORT TABLESPACE fixes:
AbstractCallback::init(): Convert the flags.
FetchIndexRootPages::operator(): Check that the tablespace flags match the
table flags. Do not attempt to convert tablespace flags to table flags,
because the conversion would necessarily be lossy.
PageConverter::update_header(): Write back the correct flags.
This takes care of the flags in IMPORT TABLESPACE.
contains a bad and a good copy
Clean up the InnoDB doublewrite buffer code.
buf_dblwr_init_or_load_pages(): Do not add empty pages to the buffer.
buf_dblwr_process(): Do consider changes to pages that are all zero.
Do not abort when finding a corrupted copy of a page in the doublewrite
buffer, because there could be multiple copies in the doublewrite buffer,
and only one of them needs to be good.
It was used for get_datetime_value() and for thd->is_error().
But in fact, get_datetime_value() never used thd argument, because the
cache ptr argument was NULL. And thd->is_error() check was not needed
at that place at all.
it used current_thd->alloc() and allocated on the thd's execution arena,
not on table->expr_arena.
Remove THD::arena_for_cached_items that is temporarily set in
update_virtual_fields(), and replaces THD arena in get_datetime_value().
Instead set THD arena to table->expr_arena for the whole duration
of update_virtual_fields()
Item_func_le included Arg_comparator. Arg_comparator remembered
the current_thd during fix_fields and used that value during
execution to allocate Item_cache in get_datetime_value().
But for vcols fix_fields and val_int can happen in different threads.
Same bug for Item_func_in using in_datetime or cmp_item_datetime,
both also remembered current_thd at fix_fields() to use it later
for get_datetime_value().
As a fix, these objects no longer remember the current_thd,
and get_datetime_value() uses current_thd at run time. This
should not increase the number of current_thd calls much, as
Item_cache is created only once anyway.
Fixing Item::decimal_precision() to return at least one digit.
This fixes the problem reported in MDEV.
Also, fixing Item_func_signed::fix_length_and_dec() to reserve
space for at least one digit (plus one character for an optional sign).
This is needed to have CONVERT(expr,SIGNED) and CONVERT(expr,UNSIGNED)
create correct string fields when they appear in string context, e.g.:
CREATE TABLE t1 AS SELECT CONCAT(CONVERT('',SIGNED));
Test crash recovery from an encrypted redo log with innodb_encrypt_log=0.
Previously, we did a clean shutdown, so only the log checkpoint
information would have been read from the redo log. With this change,
we will be reading and applying encrypted redo log records.
include/start_mysqld.inc: Observe $restart_parameters.
encryption.innodb-log-encrypt: Remove some unnecessary statements,
and instead of restarting the server and concurrently accessing
the files while the server is running, kill the server, check the
files, and finally start up the server.
innodb.log_data_file_size: Use start_mysqld.inc with $restart_parameters.
