With ibmdb2i_create_index_option set to 1, creating an IBMDB2I table
with a primary key should produce an additional index that uses EBCDIC
hexadecimal sorting. However, this does not work. Adding indexes that
are not primary keys does work. The ibmdb2i_create_index_option should
be honoured when creating a table with a primary key.
This patch adds code to the create() function to check for the value
of the ibmdb2i_create_index_option variable and, when appropriate, to
generate a *HEX-based shadow index in DB2 for the primary key. Previously
this behavior was limited to secondary indexes.
Additionally, this patch restricts the creation of shadow indexes to
cases in which a non-*HEX sort sequence is used, as the documentation
for ibmdb2i_create_index_option describes. Previously, the shadow index
would in some cases be created even when the MySQL-specific index used
*HEX sorting, leading to redundant indexes.
Finally, the code used to generate the list of fields for indexes
and the code used to generate the SQL statement for the shadow
indexes has been refactored into individual functions.
mysql-test/suite/ibmdb2i/r/ibmdb2i_bug_45983.result:
Bug#45983 ibmdb2i_create_index_option=1 not working for primary key
Result file for the test case.
mysql-test/suite/ibmdb2i/t/ibmdb2i_bug_45983.test:
Bug#45983 ibmdb2i_create_index_option=1 not working for primary key
Add tests to verify that the ibmdb2i_create_index_option is being honoured
when creating a table with a primary key.
storage/ibmdb2i/ha_ibmdb2i.cc:
Bug#45983 ibmdb2i_create_index_option=1 not working for primary key
- Add code to the create() function to check for the value of the
ibmdb2i_create_index_option variable and, when appropriate, to
generate a *HEX-based shadow index in DB2 for the primary key.
- Restrict the creation of shadow indexes to cases in which a
non-*HEX sort sequence is used.
- Refractor code used to generate the list of fields for indexes
and the code used to generate the SQL statement for the shadow
indexes into individual functions.
storage/ibmdb2i/ha_ibmdb2i.h:
Bug#45983 ibmdb2i_create_index_option=1 not working for primary key
Add function prototypes for the functions that.
- Generate the list of fields for indexes
- Generate the SQL statement for the shadow
indexes
Some collations were causing IBMDB2I to report
inaccurate key range estimations to the optimizer
for LIKE clauses that select substrings. This can
be seen by running EXPLAIN. This problem primarily
affects multi-byte and unicode character sets.
This patch involves substantial changes to several
modules. There are a number of problems with the
character set and collation handling. These problems
have been or are being fixed, and a comprehensive
test has been included which should provide much
better coverage than there was before. This test
is enabled only for IBM i 6.1, because that version
has support for the greatest number of collations.
mysql-test/suite/ibmdb2i/r/ibmdb2i_collations.result:
Bug#45803 Inaccurate estimates for partial key values with IBMDB2I
result file for test case.
mysql-test/suite/ibmdb2i/t/ibmdb2i_collations.test:
Bug#45803 Inaccurate estimates for partial key values with IBMDB2I
Tests for character sets and collations. This test
is enabled only for IBM i 6.1, because that version
has support for the greatest number of collations.
storage/ibmdb2i/db2i_conversion.cc:
Bug#45803 Inaccurate estimates for partial key values with IBMDB2I
- Added support in convertFieldChars to enable records_in_range
to determine how many substitute characters were inserted and
to suppress conversion warnings.
- Fixed bug which was causing all multi-byte and Unicode fields
to be created as UTF16 (CCSID 1200) fields in DB2. The corrected
code will now create UCS2 fields as UCS2 (CCSID 13488), UTF8
fields (except for utf8_general_ci) as UTF8 (CCSID 1208), and
all other multi-byte or Unicode fields as UTF16. This will only
affect tables that are newly created through the IBMDB2I storage
engine. Existing IBMDB2I tables will retain the original CCSID
until recreated. The existing behavior is believed to be
functionally correct, but it may negatively impact performance
by causing unnecessary character conversion. Additionally, users
accessing IBMDB2I tables through DB2 should be aware that mixing
tables created before and after this change may require extra type
casts or other workarounds. For this reason, users who have
existing IBMDB2I tables using a Unicode collation other than
utf8_general_ci are encouraged to recreate their tables (e.g.
ALTER TABLE t1 ENGINE=IBMDB2I) in order to get the updated CCSIDs
associated with their DB2 tables.
- Improved error reporting for unsupported character sets by forcing
a check for the iconv conversion table at table creation time,
rather than at data access time.
storage/ibmdb2i/db2i_myconv.h:
Bug#45803 Inaccurate estimates for partial key values with IBMDB2I
Fix to set errno when iconv fails.
storage/ibmdb2i/db2i_rir.cc:
Bug#45803 Inaccurate estimates for partial key values with IBMDB2I
Significant improvements were made to the records_in_range code
that handles partial length string data in keys for optimizer plan
estimation. Previously, to obtain an estimate for a partial key
value, the implementation would perform any necessary character
conversion and then attempt to determine the unpadded length of
the partial key by searching for the minimum or maximum sort
character. While this algorithm was sufficient for most single-byte
character sets, it did not treat Unicode and multi-byte strings
correctly. Furthermore, due to an operating system limitation,
partial keys having UTF8 collations (ICU sort sequences in DB2)
could not be estimated with this method.
With this patch, the code no longer attempts to explicitly determine
the unpadded length of the key. Instead, the entire key is converted
(if necessary), including padding, and then passed to the operating
system for estimation. Depending on the source and target character
sets and collations, additional logic is required to correctly
handle cases in which MySQL uses unconvertible or differently
-weighted values to pad the key. The bulk of the patch exists
to implement this additional logic.
storage/ibmdb2i/ha_ibmdb2i.h:
Bug#45803 Inaccurate estimates for partial key values with IBMDB2I
The convertFieldChars declaration was updated to support additional
optional behaviors.
Creating an IBMDB2I table with the macce character set
is successful, but any attempt to insert data into the
table was failing.
This was happening because the character set name "macce"
is not a valid iconv descriptor for IBM i PASE. This patch
adds an override to convertTextDesc to use the equivalent
valid iconv descriptor "IBM-1282" instead.
mysql-test/suite/ibmdb2i/r/ibmdb2i_bug_45793.result:
Bug#45793 macce charset causes error with IBMDB2I
Result file for the test case.
mysql-test/suite/ibmdb2i/t/ibmdb2i_bug_45793.test:
Bug#45793 macce charset causes error with IBMDB2I
Add a testcase for the macce charater set.
storage/ibmdb2i/db2i_charsetSupport.cc:
Bug#45793 macce charset causes error with IBMDB2I
The character set name "macce" is not a valid iconv
descriptor for IBM i PASE. Add an override to convertTextDesc
to use the equivalent valid iconv descriptor "IBM-1282"
instead.
Some collations--including cp1250_czech_cs,latin2_czech_cs,
ucs2/utf8_czech_ci, ucs2/utf8_danish_ci--are not being
sorted correctly by the IBMDB2I storage engine. This
was being caused because the sort order used by DB2 is
incompatible with the order expected by MySQL.
This patch removes support for the cp1250_czech_cs and
latin2_czech_cs collations because it has been determined
that the sort order used by DB2 is incompatible with the
order expected by MySQL. Users needing a czech collation
with IBMDB2I are encouraged to use a Unicode-based collation
instead of these single-byte collations. This patch also
modifies the DB2 sort sequence used for ucs2/utf8_czech_ci
and ucs2/utf8_danish_ci collations to better match the
sorting expected by MySQL. This will only affect indexes
or tables that are newly created through the IBMDB2I storage
engine. Existing IBMDB2I tables will retain the old sort
sequence until recreated.
mysql-test/suite/ibmdb2i/r/ibmdb2i_bug_45196.result:
Bug#45196 Some collations do not sort correctly with IBMDB2I
Result file for the test case.
mysql-test/suite/ibmdb2i/t/ibmdb2i_bug_45196.test:
Bug#45196 Some collations do not sort correctly with IBMDB2I
Adding tests for testing the sort order with the modified collations.
storage/ibmdb2i/db2i_collationSupport.cc:
Bug#45196 Some collations do not sort correctly with IBMDB2I
Remove the support for the cp1250_czech_cs and latin2_czech_cs
collations because it has been determined that the sort order
used by DB2 is incompatible with the order expected by MySQL.
Users needing a czech collation with IBMDB2I are encouraged to
use a Unicode-based collation instead of these single-byte
collations. This patch also modifies the DB2 sort sequence
used for ucs2/utf8_czech_ci and ucs2/utf8_danish_ci collations
to better match the sorting expected by MySQL. This will only
affect indexes or tables that are newly created through the
IBMDB2I storage engine. Existing IBMDB2I tables will retain
the old sort sequence until recreated.
In order to better support the usage of
IBMDB2I tables from within RPG programs,
the storage engine should ensure that the
RCDFMT name is consistent and predictable
for DB2 tables.
This patch appends a "RCDFMT <name>"
clause to the CREATE TABLE statement
that is passed to DB2. <name> is
generated from the original name of
the table itself. This ensures a
consistent and deterministic mapping
from the original table.
For the sake of simplicity only
the alpha-numeric characters are
preserved when generating the new
name, and these are upper-cased;
other characters are replaced with
an underscore (_). Following DB2
system identifier rules, the name
always begins with an alpha-character
and has a maximum of ten characters.
If no usable characters are found in
the table name, the name X is used.
mysql-test/suite/ibmdb2i/r/ibmdb2i_bug_44610.result:
Bug#44610 RCDFMT clause requested when creating DB2 table
Result file for the test case.
mysql-test/suite/ibmdb2i/t/ibmdb2i_bug_44610.test:
Bug#44610 RCDFMT clause requested when creating DB2 table
Test case that confirms that the names that are being generated are valid.
storage/ibmdb2i/ha_ibmdb2i.cc:
Bug#44610 RCDFMT clause requested when creating DB2 table
This patch appends a "RCDFMT <name>"
clause to the CREATE TABLE statement
that is passed to DB2. <name> is
generated from the original name of
the table itself. This ensures a
consistent and deterministic mapping
from the original table.
storage/ibmdb2i/ha_ibmdb2i.h:
Bug#44610 RCDFMT clause requested when creating DB2 table
This patch appends a "RCDFMT <name>"
clause to the CREATE TABLE statement
that is passed to DB2. <name> is
generated from the original name of
the table itself. This ensures a
consistent and deterministic mapping
from the original table.
checking in a test case that will reproduce
the error on v5r4.
mysql-test/suite/ibmdb2i/include/have_i54.inc:
Bug#44232 Error msg should be improved when collation not supported.
mysql-test/suite/ibmdb2i/r/ibmdb2i_bug_44232.result:
Bug#44232 Error msg should be improved when collation not supported.
mysql-test/suite/ibmdb2i/t/ibmdb2i_bug_44232.test:
Bug#44232 Error msg should be improved when collation not supported.
