including the big commit
commit 305130361bf72726de220f3d2b2787395e10be61
Author: Marc Alff <marc.alff@oracle.com>
Date: Tue Feb 10 11:31:32 2015 +0100
WL#8354 BACKPORT DIGEST IMPROVEMENTS TO MYSQL 5.6
(with the following commits) and related changes in sql/
1. After a period of wait (where last_master_timestamp=0)
do NOT restore the last_master_timestamp to the timestamp
of the last executed event (which would mean we've just
executed it, and we're that much behind the master).
2. Update last_master_timestamp before executing the event,
not after.
Take the approach from the this commit (but with a different test
case that actually makes sense):
commit 0c75ab453fb8c5439576af8fe5add7a1b89f1569
Author: Luis Soares <luis.soares@sun.com>
Date: Thu Apr 15 17:39:31 2010 +0100
BUG#52166: Seconds_Behind_Master spikes after long idle period
partially cherry-pick from mysql/5.6.
No test case (mysql/5.6 test case is useless, the correct
test case uses too much memory)
commit e061985813db54948f99892d89f7e076242473a5
Author: <Dao-Gang.Qu@sun.com>
Date: Tue Jun 1 15:02:22 2010 +0800
Bug #49931 Incorrect type in read_log_event error
Bug #49932 mysqlbinlog max_allowed_packet hard coded to 1GB
Problem: For every event read, mysqlbinlog calls localtime() which in turn
calls stat(/etc/localtime) which is causing kernel mutex contention.
Analysis and Fix:
localtime() calls stat(/etc/localtime) for every instance of the call
where as localtime_r() the reentrant version was optimized to store
the read only tz internal structure. Hence it will not call
stat(/etc/localtime). It will call only once at the beginning.
The mysql server is calling localtime_r() and mysqlbinlog tool is
one place where we are still using localtime().
Once the process (mysqlbinlog) is started if timezone is changed
it will be not picked up the the process and it will continue
with the same values as the beginning of the process. This
behavior is in-lined with mysql server.
Also adding localtime_r() and gmtime_r() support for windows.
Problem:
========
In a master slave replication if a slave receives a
Start_log_event_v3 the payload is expected to be of fixed
size. If a payload which is smaller than the fixed size is
received it causes a read out of bounds issue.
Analysis:
========
According to documentation the fixed data part of
Start_log_event_v3 looks as shown below.
2 bytes: The binary log format version
50 bytes: The MySQL server's version
4 bytes: Timestamp in seconds when this event was created
Since the payload is expected to be of fixed size, therefore
ST_SERVER_VER_LEN (50) bytes are memcpy'ed into
server_version. But if a malicious master sends a shorter
payload it causes a read out of bounds issue.
Fix:
===
In Start_log_event_v3 event's constructor a check has been
added which expects the minimum payload length to be of size
common_header_len + ST_COMMON_HEADER_LEN_OFFSET bytes. If a
malicious packet of lesser length is received it will be
considered as an invalid event.
sql/log_event.cc:
Added code changes to check the minimum packet length
of Start_log_event_v3 should be > 56.
sql/log_event.h:
Moved server_version from stack to heap and modified
is_valid function for Start_log_event_v3.
merge from MySQL-5.6, revision:
revno: 3677.2.1
committer: Alfranio Correia <alfranio.correia@oracle.com>
timestamp: Tue 2012-02-28 16:26:37 +0000
message:
BUG#13627921 - MISSING FLAGS IN SQL_COMMAND_FLAGS MAY LEAD TO REPLICATION PROBLEMS
Flags in sql_command_flags[command] are not correctly set for the following
commands:
. SQLCOM_SET_OPTION is missing CF_CAN_GENERATE_ROW_EVENTS;
. SQLCOM_BINLOG_BASE64_EVENT is missing CF_CAN_GENERATE_ROW_EVENTS;
. SQLCOM_REVOKE_ALL is missing CF_CHANGES_DATA;
. SQLCOM_CREATE_FUNCTION is missing CF_AUTO_COMMIT_TRANS;
This may lead to a wrong sequence of events in the binary log. To fix
the problem, we correctly set the flags in sql_command_flags[command].
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
Problem: A corrupted header length in FORMAT_DESCRIPTION_LOG_EVENT
can cause server to crash.
Analysis: FORMAT_DESCRIPTION_EVENT will be considered invalid if
header len is too small (i.e. below OLD_HEADER_LEN).
Format_description_log_event:: Format_description_log_event(...)
{
...
if ((common_header_len=buf[ST_COMMON_HEADER_LEN_OFFSET]) < OLD_HEADER_LEN)
DBUG_VOID_RETURN; /* sanity check */
...
post_header_len= my_memdup(...)
}
In that case Format_description_log_event constructor will return early,
without allocating any memory for post_header_len. Thence this variable is
left uninitialized and making server to crash when server is trying
to free the uninitialized value.
Fix: When Format_description_log_event constructor returns early, assign
NULL to post_header_len.
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
The bug was that in some cases, if a replicated transaction was rolled back
due to deadlock, during the subsequent retry of that transaction, the
gtid_slave_pos would _not_ be updated with the new GTID, leaving the GTID
position of the slave incorrect.
Fix this by ensuring during the retry that we clear the flag that marks that
the GTID has already been recorded in gtid_slave_pos, so that the update of
gtid_slave_pos will be done again during the retry.
In the original bug, the symptom was an assertion due to OPTION_GTID_BEGIN not
being cleared during the retry of the transaction. The reason was some code in
handling of a COMMIT query event, which would not clear the flag when not
recording a GTID in gtid_slave_pos. This commit also fixes that code to always
clear the OPTION_GTID_BEGIN flag for clarity, though it is actually not
possible for OPTION_GTID_BEGIN to become set unless a GTID is pending for
update (after fixing the bug described above).
After-review changes.
For this patch in 10.0, we do not introduce a new public storage engine API,
we just fix the InnoDB/XtraDB issues. In 10.1, we will make a better public
API that can be used for all storage engines (MDEV-6429).
Eliminate the background thread that did deadlock kills asynchroneously.
Instead, we ensure that the InnoDB/XtraDB code can handle doing the kill from
inside the deadlock detection code (when thd_report_wait_for() needs to kill a
later thread to resolve a deadlock).
(We preserve the part of the original patch that introduces dedicated mutex
and condition for the slave init thread, to remove the abuse of
LOCK_thread_count for start/stop synchronisation of the slave init thread).
NON-EXISTS RECORDS
Problem:
========
In RBR replication, master deletes a record but the record
don't exist on slave. when slave tries to apply the
Delete_row_log_event from master, it will result in an
assert on slave.
Analysis:
========
This problem exists not only with Delete_rows event but also
with Update_rows event as well. Trying to update a non
existing row on the slave from the master will cause the
same assert. This assert occurs only for the tables that
doesn't have primary keys and which basically require
sequential scan to be done to locate a record. This bug
occurs only with innodb engine not with myisam.
When update or delete rows is executed on a slave on a table
which doesn't have primary key the updated record is stored
in a buffer named table->record[0] and the same is copied to
table->record[1] so that during sequential scan
table->record[0] can reloaded with fetched data from the
table and compared against table->record[1]. In a special
case where there is no record on the slave side scan will
result in EOF in that case we reinit the scan and we try to
compare record[0] with record[1] which are basically the
same. This comparison is incorrect. Since they both are the
same record_compare() will report that record is found and
we try to go ahead and try to update/delete non existing
row. Ideally if the scan results in EOF means no data found
hence no need to do a record_compare() at all.
Fix:
===
Avoid comparision of records on EOF.
sql/log_event.cc:
Avoid record comparison on end of file.
sql/log_event_old.cc:
Avoid record comparison on end of file.
replication causing replication to fail.
Remove the temporary fix for MDEV-5914, which used READ COMMITTED for parallel
replication worker threads. Replace it with a better, more selective solution.
The issue is with certain edge cases of InnoDB gap locks, for example between
INSERT and ranged DELETE. It is possible for the gap lock set by the DELETE to
block the INSERT, if the DELETE runs first, while the record lock set by
INSERT does not block the DELETE, if the INSERT runs first. This can cause a
conflict between the two in parallel replication on the slave even though they
ran without conflicts on the master.
With this patch, InnoDB will ask the server layer about the two involved
transactions before blocking on a gap lock. If the server layer tells InnoDB
that the transactions are already fixed wrt. commit order, as they are in
parallel replication, InnoDB will ignore the gap lock and allow the two
transactions to proceed in parallel, avoiding the conflict.
Improve the fix for MDEV-6020. When InnoDB itself detects a deadlock, it now
asks the server layer for any preferences about which transaction to roll
back. In case of parallel replication with two transactions T1 and T2 fixed to
commit T1 before T2, the server layer will ask InnoDB to roll back T2 as the
deadlock victim, not T1. This helps in some cases to avoid excessive deadlock
rollback, as T2 will in any case need to wait for T1 to complete before it can
itself commit.
Also some misc. fixes found during development and testing:
- Remove thd_rpl_is_parallel(), it is not used or needed.
- Use KILL_CONNECTION instead of KILL_QUERY when a parallel replication
worker thread is killed to resolve a deadlock with fixed commit
ordering. There are some cases, eg. in sql/sql_parse.cc, where a KILL_QUERY
can be ignored if the query otherwise completed successfully, and this
could cause the deadlock kill to be lost, so that the deadlock was not
correctly resolved.
- Fix random test failure due to missing wait_for_binlog_checkpoint.inc.
- Make sure that deadlock or other temporary errors during parallel
replication are not printed to the the error log; there were some places
around the replication code with extra error logging. These conditions can
occur occasionally and are handled automatically without breaking
replication, so they should not pollute the error log.
- Fix handling of rgi->gtid_sub_id. We need to be able to access this also at
the end of a transaction, to be able to detect and resolve deadlocks due to
commit ordering. But this value was also used as a flag to mark whether
record_gtid() had been called, by being set to zero, losing the value. Now,
introduce a separate flag rgi->gtid_pending, so rgi->gtid_sub_id remains
valid for the entire duration of the transaction.
- Fix one place where the code to handle ignored errors called reset_killed()
unconditionally, even if no error was caught that should be ignored. This
could cause loss of a deadlock kill signal, breaking deadlock detection and
resolution.
- Fix a couple of missing mysql_reset_thd_for_next_command(). This could
cause a prior error condition to remain for the next event executed,
causing assertions about errors already being set and possibly giving
incorrect error handling for following event executions.
- Fix code that cleared thd->rgi_slave in the parallel replication worker
threads after each event execution; this caused the deadlock detection and
handling code to not be able to correctly process the associated
transactions as belonging to replication worker threads.
- Remove useless error code in slave_background_kill_request().
- Fix bug where wfc->wakeup_error was not cleared at
wait_for_commit::unregister_wait_for_prior_commit(). This could cause the
error condition to wrongly propagate to a later wait_for_prior_commit(),
causing spurious ER_PRIOR_COMMIT_FAILED errors.
- Do not put the binlog background thread into the processlist. It causes
too many result differences in mtr, but also it probably is not useful
for users to pollute the process list with a system thread that does not
really perform any user-visible tasks...
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
Problem:
Load_log_event::print_query() function does not put escape character in file name
for "LOAD DATA INFILE" statement.
Analysis:
When we have "'" in our file name for "LOAD DATA INFILE" statement,
Load_log_event::print_query() function does not put escape character
in our file name.
This one result that when we show binary-log, we get file name without
escape character.
Solution:
To put escape character when we have "'" in file name, for this instead of using
simple memcpy() to put file-name, we will use pretty_print_str().
If replication breaks in GTID mode, it is not trivial to determine the GTID of
the failing event group. This is a problem, as such GTID is needed eg. to
explicitly set @@gtid_slave_pos to skip to after that event group, or to
compare errors on different servers, etc.
Fix by ensuring that relevant slave errors logged to the error log include the
GTID of the event group containing the problem event.
This is MySQL Bug#59123. The message string stored in an INCIDENT event was
not zero-terminated. This caused any following checksum bytes (if enabled on
the master) to be output to the error log as trailing garbage when the message
was printed to the error log.
Backport the patch from MySQL 5.6:
revno: 2876.228.200
revision-id: zhenxing.he@sun.com-20110111051323-w2xnzvcjn46x6h6u
committer: He Zhenxing <zhenxing.he@sun.com>
timestamp: Tue 2011-01-11 13:13:23 +0800
message:
BUG#59123 rpl_stm_binlog_max_cache_size fails sporadically with found warnings
Also add a test case.
The INCIDENT_EVENT always caused slave error and abort, without checking
--slave-skip-errors.
Now, if error 1590, ER_SLAVE_INCIDENT is included in the --slave-skip-errors
list, incident events will be ignored.
This is a merge of this MySQL 5.6 patch:
revision-id: frazer@mysql.com-20110314170916-ypgin17otj3ucx95
committer: Frazer Clement <frazer@mysql.com>
timestamp: Mon 2011-03-14 17:09:16 +0000
message:
Bug#11799671 NOT POSSIBLE TO SKIP INCIDENT ERRORS
committer: Christopher Powers <chris.powers@oracle.com>
branch nick: mysql-5.6-bug16750433
timestamp: Fri 2013-06-28 07:48:12 -0500
message:
Bug#16750433 - THE STATEMENT DIGEST DOES NOT SHOW THE SLAVE SQL
THREAD STATEMENTS
revno: 5414.1.1
committer: Marc Alff <marc.alff@oracle.com>
branch nick: mysql-5.6-bug17271055
timestamp: Thu 2013-08-29 12:29:25 +0200
message:
Bug#17271055 "STATEMENT/COM" EVENT MEANING IS UNCLEAR
(test case was merged with perfschema 5.6.17)
The previous patch for this bug was unfortunately completely wrong.
The purpose of cached_charset is to remember which character set we
have installed currently in the THD, so that in the common case where
charset does not change between queries, we do not need to update it
in the THD. Thus, it is important that the cached_charset field is
tightly coupled to the THD for which it handles caching.
Thus the right place to put cached_charset seems to be in the THD.
This patch introduces a field THD:system_thread_info where such info
in general can be placed without further inflating the THD with unused
data for other threads (THD is already far too big as it is). It then
moves the cached_charset into this slot for the SQL driver thread and
for the parallel replication worker threads.
The THD::rpl_filter field is also moved inside system_thread_info, to
keep the size of THD unchanged. Moving further fields in to reduce the
size of THD is a separate task, filed as MDEV-6164.
Replication caches the character sets used in a query, to be able to quickly
reuse them for the next query in the common case of them not having changed.
In parallel replication, this caching needs to be per-worker-thread. The
code was not modified to handle this correctly, so the caching in one worker
could cause another worker to run a query using the wrong character set,
causing replication corruption.
Copied relevant test cases and code from the MySQL 5.6 tree
Testing of my_use_symdir moved to engines.
mysql-test/r/partition_windows.result:
Updated result file
mysql-test/suite/archive/archive_no_symlink-master.opt:
Testing of symlinks with archive
mysql-test/suite/archive/archive_no_symlink.result:
Testing of symlinks with archive
mysql-test/suite/archive/archive_no_symlink.test:
Testing of symlinks with archive
mysql-test/suite/archive/archive_symlink.result:
Testing of symlinks with archive
mysql-test/suite/archive/archive_symlink.test:
Testing of symlinks with archive
sql/log_event.cc:
Updated comment
sql/partition_info.cc:
Don't test my_use_symdir here
sql/sql_parse.cc:
Updated comment
sql/sql_table.cc:
Don't test my_use_symdir here
sql/table.cc:
Added more DBUG_PRINT
storage/archive/ha_archive.cc:
Give warnings for index_file_name and if we can't use data directory
storage/myisam/ha_myisam.cc:
Give warnings if we can't use data directory or index directory
Before, the arrival of same GTID twice in multi-source replication
would cause double-apply or in gtid strict mode an error.
Keep the behaviour, but add an option --gtid-ignore-duplicates which
allows to correctly handle duplicates, ignoring all but the first.
This relies on the user ensuring correct configuration so that
sequence numbers are strictly increasing within each replication
domain; then duplicates can be detected simply by comparing the
sequence numbers against what is already applied.
Only one master connection (but possibly multiple parallel worker
threads within that connection) is allowed to apply events within
one replication domain at a time; any other connection that
receives a GTID in the same domain either discards it (if it is
already applied) or waits for the other connection to not have
any events to apply.
Intermediate patch, as proof-of-concept for testing. The main limitation
is that currently it is only implemented for parallel replication,
@@slave_parallel_threads > 0.
- Removed double call to trans_begin() for GTID BEGIN event
- Don't set OPTION_BEGIN before calling trans_begin() as this causes extra work in trans_begin()
sql/log_event.cc:
Removed double call to trans_begin for GTID BEGIN event.
Don't set OPTION_BEGIN before calling trans_begin() as this causes extra work in trans_begin().
This was done by removing parsing of "BEGIN" and instead executing trans_begin() direct.
This is much faster, but we lost the ability logging of possible slow "BEGIN" statements. As this should never happen it can be ignored.
The problem was when a GTID event was part of a group commit, and so contained
a commit id. The code that replaces GTID with a BEGIN event for old slaves did
not correctly handle this case.
Fix the code so that the GTID with commit id can also be properly replaced
with a BEGIN query event. The extra two bytes are in the BEGIN event replaced
with a dummy, empty time zone string.
With parallel replication, there can be any number of events queued on
in-memory lists in the worker threads.
For normal STOP SLAVE, we want to skip executing any remaining events on those
lists and stop as quickly as possible.
However, for START SLAVE UNTIL, when the UNTIL position is reached in the SQL
driver thread, we must _not_ stop until all already queued events for the
workers have been executed - otherwise we would stop too early, before the
actual UNTIL position had been completely reached.
The code did not handle UNTIL correctly, stopping too early due to not
executing the queued events to completion. Fix this, and also implement that
an explicit STOP SLAVE in the middle (when the SQL driver thread has reached
the UNTIL position but the workers have not) _will_ cause an immediate stop.
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
