When CMAKE_CROSSCOMPILING_EMULATOR is defined, a cross-compile
can be made, however with native (emulated) execution possible.
This commit takes those points in the build system that
execute built targets natively and allow these to be executed
in a crosscompile if CMAKE_CROSSCOMPILING_EMULATOR is defined.
Closes#1805
SST scripts for Galera should use the new mariabackup interface
instead of the innobackupex interface, which is currently only
supported for compatibility reasons.
This commit converts the SST script for mariabackup to use the
new interface. It does not need separate tests, as any problems
will be seen as failures when running multiple tests for the
mariabackup-based SST.
This patch fixes an issue with launching mariabackup during SST
(when used with Galera), when during bootstrap mariabackup receives
the "--innodb" option, which is incorrectly interpreted as shortcut
for "--innodb-force-recovery". This patch does not require separate
test for mtr, as the problem is visible in general testing on
buildbot.
A consistency check for fil_space_t::name is causing recovery failures
in MDEV-25180 (Atomic ALTER TABLE). So, we'd better remove that field
altogether.
fil_space_t::name was more or less a copy of dict_table_t::name
(except for some special cases), and it was not being used for
anything useful.
There used to be a name_hash, but it had been removed already in
commit a75dbfd718 (MDEV-12266).
We will also remove os_normalize_path(), OS_PATH_SEPARATOR,
OS_PATH_SEPATOR_ALT. On Microsoft Windows, we will treat \ and /
roughly in the same way. The intention is that for per-table
tablespaces, the filenames will always follow the pattern
prefix/databasename/tablename.ibd. (Any \ in the prefix must not
be converted.)
ut_basename_noext(): Remove (unused function).
read_link_file(): Replaces RemoteDatafile::read_link_file().
We will ensure that the last two path component separators are
forward slashes (converting up to 2 trailing backslashes on
Microsoft Windows), so that everywhere else we can
assume that data file names end in "/databasename/tablename.ibd".
Note: On Microsoft Windows, path names that start with \\?\ must
not contain / as path component separators. Previously, such paths
did work in the DATA DIRECTORY argument of InnoDB tables.
Reviewed by: Vladislav Vaintroub
The mariabackup interface currently supports passing a password
through an explicit command line variable, but does not support
passing a password through the MYSQL_PWD environment variable.
At the same time, the Galera SST script for mariabackup uses
the environment variable to pass the password, which leads
(in some cases) to an unsuccessful launch of mariabackup and
to the inability to start the cluster. This patch fixes this
issue. It does not need a separate test, as the problem is
visible in general testing on buildbot.
During the prepare phase of restoring backups, "mariabackup" does
not seem to allow (or recognize) the option "innodb_force_recovery"
for the embedded InnoDB server instance that it starts.
If page corruption observed during page recovery, the prepare step
fails. While this is indeed the correct behavior ideally, allowing
this option to be set in case of emergencies might be useful when
the current backup is the only copy available. Some error messages
during "--prepare" suggest to set "innodb_force_recovery" to 1:
[ERROR] InnoDB: Set innodb_force_recovery=1 to ignore corruption.
For backwards compatibility, "mariabackup --innobackupex --apply-log"
should also have this option.
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
based on the man-page
```
The replace program is used by msql2mysql. See msql2mysql(1).
```
msql2mysql is labeled as Client component, so should the dependency
Closes PR #900
std version has an advantage of a more convenient units implementation from
std::chrono. Now it's no need to multipy/divide to bring anything to
micro seconds.
liburing is a new optional dependency (WITH_URING=auto|yes|no)
that replaces libaio when it is available.
aio_uring: class which wraps io_uring stuff
aio_uring::bind()/unbind(): optional optimization
aio_uring::submit_io(): mutex prevents data race. liburing calls are
thread-unsafe. But if you look into it's implementation you'll see
atomic operations. They're used for synchronization between kernel and
user-space only. That's why our own synchronization is still needed.
For systemd, we add LimitMEMLOCK=524288 (ulimit -l 524288)
because the io_uring_setup system call that is invoked
by io_uring_queue_init() requests locked memory. The value
was found empirically; with 262144, we would occasionally
fail to enable io_uring when using the maximum values of
innodb_read_io_threads=64 and innodb_write_io_threads=64.
aio_uring::thread_routine(): Tolerate -EINTR return from
io_uring_wait_cqe(), because it may occur on shutdown
on Ubuntu 20.10 (Groovy Gorilla).
This was mostly implemented by Eugene Kosov. Systemd integration
and improved startup/shutdown error handling by Marko Mäkelä.
Historically, InnoDB supported a buggy page checksum algorithm that did not
compute a checksum over the full page. Later, well before MySQL 4.1
introduced .ibd files and the innodb_file_per_table option, the algorithm
was corrected and the first 4 bytes of each page were redefined to be
a checksum.
The original checksum was so slow that an option to disable page checksum
was introduced for benchmarketing purposes.
The Intel Nehalem microarchitecture introduced the SSE4.2 instruction set
extension, which includes instructions for faster computation of CRC-32C.
In MySQL 5.6 (and MariaDB 10.0), innodb_checksum_algorithm=crc32 was
implemented to make of that. As that option was changed to be the default
in MySQL 5.7, a bug was found on big-endian platforms and some work-around
code was added to weaken that checksum further. MariaDB disables that
work-around by default since MDEV-17958.
Later, SIMD-accelerated CRC-32C has been implemented in MariaDB for POWER
and ARM and also for IA-32/AMD64, making use of carry-less multiplication
where available.
Long story short, innodb_checksum_algorithm=crc32 is faster and more secure
than the pre-MySQL 5.6 checksum, called innodb_checksum_algorithm=innodb.
It should have removed any need to use innodb_checksum_algorithm=none.
The setting innodb_checksum_algorithm=crc32 is the default in
MySQL 5.7 and MariaDB Server 10.2, 10.3, 10.4. In MariaDB 10.5,
MDEV-19534 made innodb_checksum_algorithm=full_crc32 the default.
It is even faster and more secure.
The default settings in MariaDB do allow old data files to be read,
no matter if a worse checksum algorithm had been used.
(Unfortunately, before innodb_checksum_algorithm=full_crc32,
the data files did not identify which checksum algorithm is being used.)
The non-default settings innodb_checksum_algorithm=strict_crc32 or
innodb_checksum_algorithm=strict_full_crc32 would only allow CRC-32C
checksums. The incompatibility with old data files is why they are
not the default.
The newest server not to support innodb_checksum_algorithm=crc32
were MySQL 5.5 and MariaDB 5.5. Both have reached their end of life.
A valid reason for using innodb_checksum_algorithm=innodb could have
been the ability to downgrade. If it is really needed, data files
can be converted with an older version of the innochecksum utility.
Because there is no good reason to allow data files to be written
with insecure checksums, we will reject those option values:
innodb_checksum_algorithm=none
innodb_checksum_algorithm=innodb
innodb_checksum_algorithm=strict_none
innodb_checksum_algorithm=strict_innodb
Furthermore, the following innochecksum options will be removed,
because only strict crc32 will be supported:
innochecksum --strict-check=crc32
innochecksum -C crc32
innochecksum --write=crc32
innochecksum -w crc32
If a user wishes to convert a data file to use a different checksum
(so that it might be used with the no-longer-supported
MySQL 5.5 or MariaDB 5.5, which do not support IMPORT TABLESPACE
nor system tablespace format changes that were made in MariaDB 10.3),
then the innochecksum tool from MariaDB 10.2, 10.3, 10.4, 10.5 or
MySQL 5.7 can be used.
Reviewed by: Thirunarayanan Balathandayuthapani
We have innodb_use_native_aio=ON by default since the introduction of
that parameter in commit 2f9fb41b05
(MySQL 5.5 and MariaDB 5.5).
However, to really benefit from the setting, the files should be
opened in O_DIRECT mode, to bypass the file system cache.
In this way, the reads and writes can be submitted with DMA, using
the InnoDB buffer pool directly, and no processor cycles need to be
used for copying data. The use of O_DIRECT benefits not only the
current libaio implementation, but also liburing.
os_file_set_nocache(): Test innodb_flush_method in the function,
not in the callers.
One should not change the program arguments!
This change also reduces warnings from the icc compiler.
Almost all changes are just syntax changes (adding const to
'get_one_option function' declarations).
Other changes:
- Added a few cast of 'argument' from 'const char*' to 'char *'. This
was mainly in calls to 'external' functions we don't have control of.
- Ensure that all reset of 'password command line argument' are similar.
(In almost all cases it was just adding a comment and a cast)
- In mysqlbinlog.cc and mysqld.cc there was a few cases that changed
the command line argument. These places where changed to instead allocate
the option in a MEM_ROOT to avoid changing the argument. Some of this
code was changed to ensure that different programs did parsing the
same way. Added a test case for the changes in mysqlbinlog.cc
- Changed a few variables that took their value from command line options
from 'char *' to 'const char *'.
In commit 3a9a3be1c6 (MDEV-23855)
some previous logic was replaced with the condition
dirty_pct < srv_max_dirty_pages_pct_lwm, which caused
the default value of the parameter innodb_max_dirty_pages_pct_lwm=0
to lose its special meaning: 'refer to innodb_max_dirty_pages_pct instead'.
This implicit special meaning was visible in the function
af_get_pct_for_dirty(), which was removed in
commit f0c295e2de (MDEV-24369).
page_cleaner_flush_pages_recommendation(): Restore the special
meaning that was removed in MDEV-24369.
buf_flush_page_cleaner(): If srv_max_dirty_pages_pct_lwm==0.0,
refer to srv_max_buf_pool_modified_pct. This fixes the observed
performance regression due to excessive page flushing.
buf_pool_t::page_cleaner_wakeup(): Revise the wakeup condition.
innodb_init(): Do initialize srv_max_io_capacity in Mariabackup.
It was previously constantly 0, which caused mariadb-backup --prepare
to hang in buf_flush_sync(), making no progress.
