Analysis: If innodb_use_trim is not enabled or system does not
support fallocate to make persistent trim, we should always
write full page not only partial pages.
after Operating system error number 36 in a file operation.
Analysis: os_file_get_status did not handle error ENAMETOOLONG
correctly.
Fix: Add correct handling for error ENAMETOOLONG. Note that on InnoDB
case the error is not passed all the way up to server. That would
be bigger rewamp.
Use traditional statistics estimation by default (innodb-stats-traditional=true).
There could be performance regression for customers if there is a lot of
open table operations.
innodb_stats_sample_pages
Analysis: If you set the number of analyzed pages
to very low number compared to actual pages on
that table/index it randomly pics those pages
(default 8 pages), this leads to fact that query
after analyze table returns different results. If
the index tree is small, smaller than 10 *
n_sample_pages + total_external_size, then the
estimate is ok. For bigger index trees it is
common that we do not see any borders between
key values in the few pages we pick. But still
there may be n_sample_pages different key values,
or even more. And it just tries to
approximate to n_sample_pages (8).
Fix: (1) Introduced new dynamic configuration variable
innodb_stats_sample_traditional that retains
the current design. Default false.
(2) If traditional sample is not used we use
n_sample_pages = max(min(srv_stats_sample_pages,
index->stat_index_size),
log2(index->stat_index_size)*
srv_stats_sample_pages);
(3) Introduced new dynamic configuration variable
stat_modified_counter (default = 0) if set
sets lower bound for row updates when statistics is re-estimated.
If user has provided upper bound for how many rows needs to be updated
before we calculate new statistics we use minimum of provided value
and 1/16 of table every 16th round. If no upper bound is provided
(srv_stats_modified_counter = 0, default) then calculate new statistics
if 1 / 16 of table has been modified
since the last time a statistics batch was run.
We calculate statistics at most every 16th round, since we may have
a counter table which is very small and updated very often.
@param t table
@return true if the table has changed too much and stats need to be
recalculated
*/
#define DICT_TABLE_CHANGED_TOO_MUCH(t) \
((ib_int64_t) (t)->stat_modified_counter > (srv_stats_modified_counter ? \
ut_min(srv_stats_modified_counter, (16 + (t)->stat_n_rows / 16)) : \
16 + (t)->stat_n_rows / 16))
Problem is that page compressed tables currently require atomic_blobs and
that feature is not availabe currently for row_format=redundant.
Fix: Disallow page compressed create option if table row_format=redundant.
The bug was that full memory barrier was missing in the code that ensures that
a waiter on an InnoDB mutex will not go to sleep unless it is guaranteed to be
woken up again by another thread currently holding the mutex. This made
possible a race where a thread could get stuck waiting for a mutex that is in
fact no longer locked. If that thread was also holding other critical locks,
this could stall the entire server. There is an error monitor thread than can
break the stall, it runs about once per second. But if the error monitor
thread itself got stuck or was not running, then the entire server could hang
infinitely.
This was introduced on i386/amd64 platforms in 5.5.40 and 10.0.13 by an
incorrect patch that tried to fix the similar problem for PowerPC.
This commit reverts the incorrect PowerPC patch, and instead implements a fix
for PowerPC that does not change i386/amd64 behaviour, making PowerPC work
similarly to i386/amd64.
ALTER TABLE: don't fill default values per row, do it once.
And do it in two places - for copy_data_between_tables() and for online ALTER.
Also, run function_defaults test both for MyISAM and for InnoDB.
Merge Facebook commit cd063ab930
authored by Peng Tian from https://github.com/facebook/mysql-5.6
Introduced a new configuration variable innodb_fatal_semaphore_wait_threshold,
it makes the fatal semaphore timeout configurable. Modified original commit
so that no MariaDB server files are changed, instead introduced a new
InnoDB/XtraDB configuration variable.
Its default/min/max vlaues are 600/1/2^32-1 in seconds (it was hardcoded
as 600, now its default value is 600, so the default behavior of this diff
should be no change).
setting of innodb_io_capacity_max
(a) Changed the behaviour so that if you set innodb_io_capacity to a
value > innodb_io_capacity_max that the value is accepted AND
that innodb_io_capacity_max = innodb_io_capacity * 2.
(b) If someone wants to reduce innodb_io_capacity_max and
reduce it below innodb_io_capacity then innodb_io_capacity
should be reduced to the same level as innodb_io_capacity_max.
In both cases give a warning to user.
Analysis: InnoDB error monitor is responsible to call every second
sync_arr_wake_threads_if_sema_free() to wake up possible hanging
threads if they are missed in mutex_signal_object. This is not
possible if error monitor itself is on mutex/semaphore wait. We
should avoid all unnecessary mutex/semaphore waits on error monitor.
Currently error monitor calls function buf_flush_stat_update()
that calls log_get_lsn() function and there we will try to get
log_sys mutex. Better, solution for error monitor is that in
buf_flush_stat_update() we will try to get lsn with
mutex_enter_nowait() and if we did not get mutex do not update
the stats.
Fix: Use log_get_lsn_nowait() function on buf_flush_stat_update()
function. If returned lsn is 0, we do not update flush stats.
log_get_lsn_nowait() will use mutex_enter_nowait() and if
we get mutex we return a correct lsn if not we return 0.
Analysis: InnoDB error monitor is responsible to call every second
sync_arr_wake_threads_if_sema_free() to wake up possible hanging
threads if they are missed in mutex_signal_object. This is not
possible if error monitor itself is on mutex/semaphore wait. We
should avoid all unnecessary mutex/semaphore waits on error monitor.
Currently error monitor calls function buf_flush_stat_update()
that calls log_get_lsn() function and there we will try to get
log_sys mutex. Better, solution for error monitor is that in
buf_flush_stat_update() we will try to get lsn with
mutex_enter_nowait() and if we did not get mutex do not update
the stats.
Fix: Use log_get_lsn_nowait() function on buf_flush_stat_update()
function. If returned lsn is 0, we do not update flush stats.
log_get_lsn_nowait() will use mutex_enter_nowait() and if
we get mutex we return a correct lsn if not we return 0.
Merged Facebook commit 617aef9f911d825e9053f3d611d0389e02031225
authored by Inaam Rana to InnoDB storage engine (not XtraDB)
from https://github.com/facebook/mysql-5.6
WL#7047 - Optimize buffer pool list scans and related batch processing
Reduce excessive scanning of pages when doing flush list batches. The
fix is to introduce the concept of "Hazard Pointer", this reduces the
time complexity of the scan from O(n*n) to O.
The concept of hazard pointer is reversed in this work. Academically
hazard pointer is a pointer that the thread working on it will declar
such and as long as that thread is not done no other thread is allowe
do anything with it.
In this WL we declare the pointer as a hazard pointer and then if any
thread attempts to work on it, it is allowed to do so but it has to a
the hazard pointer to the next valid value. We use hazard pointer sol
reverse traversal of lists within a buffer pool instance.
Add an event to control the background flush thread. The background f
thread wait has been converted to an os event timed wait so that it c
signalled by threads that want to kick start a background flush when
buffer pool is running low on free/dirty pages.
Description:
Using correct length when moving to next field in cmp_ref. The store
length already includes the length bytes of blobs, which is already considered
earlier for blob types.
Approved by Mattias, Jimmy [rb-7088]
Merge Facebook commit 154c579b828a60722a7d9477fc61868c07453d08
and e8f0052f9b112dc786bf9b957ed5b16a5749f7fd authored
by Steaphan Greene from https://github.com/facebook/mysql-5.6
Optimize prefix index queries to skip cluster index lookup when possible.
Currently InnoDB will always fetch the clustered index (primary key
index) for all prefix columns in an index, even when the value of a
particular record is smaller than the prefix length. This change
optimizes that case to use the record from the secondary index and avoid
the extra lookup.
Also adds two status vars that track how effective this is:
innodb_secondary_index_triggered_cluster_reads:
Times secondary index lookup triggered cluster lookup.
innodb_secondary_index_triggered_cluster_reads_avoided:
Times prefix optimization avoided triggering cluster lookup.
The debug configuration parameter innodb_optimistic_insert_debug
which was introduced for testing corner cases in B-tree handling
had a bug in it. The value 1 would trigger an infinite sequence
of page splits.
Fix: When the value 1 is specified, disable this debug feature.
Approved by Yasufumi Kinoshita
The debug configuration parameter innodb_optimistic_insert_debug
which was introduced for testing corner cases in B-tree handling
had a bug in it. The value 1 would trigger an infinite sequence
of page splits.
Fix: When the value 1 is specified, disable this debug feature.
Approved by Yasufumi Kinoshita
Merge Facebook commit 4f3e0343fd2ac3fc7311d0ec9739a8f668274f0d
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
Adds innodb_idle_flush_pct to enable tuning of the page flushing rate
when the system is relatively idle. We care about this, since doing
extra unnecessary flash writes shortens the lifespan of the flash.
Problem:
In the function dict_foreign_remove_from_cache(), the rb tree was updated
without actually verifying whether the given foreign key object is there in the
rb tree or not. There can be an existing foreign key object with the same id
in the rb tree, which must not be removed. Such a scenario comes when an
attempt is made to add a foreign key object with a duplicate identifier.
Solution:
When the foreign key object is removed from the dictionary cache, ensure
that the foreign key object removed from the rbt is the correct one.
rb#7168 approved by Jimmy and Marko.
Problem:
In the function dict_foreign_remove_from_cache(), the rb tree was updated
without actually verifying whether the given foreign key object is there in the
rb tree or not. There can be an existing foreign key object with the same id
in the rb tree, which must not be removed. Such a scenario comes when an
attempt is made to add a foreign key object with a duplicate identifier.
Solution:
When the foreign key object is removed from the dictionary cache, ensure
that the foreign key object removed from the rbt is the correct one.
rb#7168 approved by Jimmy and Marko.
Merge Facebook commit ca40b4417fd224a68de6636b58c92f133703fc68
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
Change the default value for innodb_log_compressed_pages to false
Logging these pages is a waste. We don't want this to be enabled.
One caution here: If the zlib version used by innodb is changed, but
the running version is still the previous version, and the running
version crashes, it is possible crash recovery could fail.
When crash recovery uses a zlib version at all different than the
version used by the crashed instance, it is possible that a redone
compression could fail, where the original did not, because the new
zlib version compresses the same data to a slightly larger size.
Because of the nature of compression, this is even possible when
upgrading to a version of zlib which actually peforms overall better
compression than the previous version.
If this happens, mysql will fail to recover, since a page split can
not be safely triggered during crash recovery.
So, either the exact zlib version must be controlled between builds,
or these rare recovery failures must be accepted. The cost of
logging these pages is quite high, so we consider this limitation to
be worthwhile.
This failure scenario can not happen if there was a clean shutdown.
This is only relevant to restarting crashed instances, or starting an
instance built via a hot backup too (XtraBackup).
Analysis: fil_extend_space_to_desired_size() does not provide file
node to os_aio(). This failed on Windows only because on Windows
we do not use posix_fallocate() to extend file space.
Fix: Add file node to os_aio() function call and make sure that
we do not use NULL pointer at os_aio_array_reserve_slot(). Additionally,
make sure that we do not use 0 as file_block_size (512 is the minimum).
New generation hard drives, SSDs and NVM devices support 4K
sector size. Supported sector size can be found using fstatvfs()
or GetDiskFreeSpace() functions.
dict_set_corrupted(): Use the canonical way of searching for
less-than-equal (PAGE_CUR_LE) and then checking low_match.
The code that was introduced in MySQL 5.5.17 in
Bug#11830883 SUPPORT "CORRUPTED" BIT FOR INNODB TABLES AND INDEXES
could position the cursor on the page supremum, and then attempt
to overwrite non-existing 7th field of the 1-field supremum record.
Approved by Jimmy Yang
dict_set_corrupted(): Use the canonical way of searching for
less-than-equal (PAGE_CUR_LE) and then checking low_match.
The code that was introduced in MySQL 5.5.17 in
Bug#11830883 SUPPORT "CORRUPTED" BIT FOR INNODB TABLES AND INDEXES
could position the cursor on the page supremum, and then attempt
to overwrite non-existing 7th field of the 1-field supremum record.
Approved by Jimmy Yang
Merged Facebook commit ec1aac68c74f3c1e558d057c4c9fcfe6edbbea93
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
In C++11, "" is not parsed as before. So "A""B" is not the same as "AB".
Instead, whitespace is required, like: "A" "B"
Merged Facebook commit dd2d11be7aaf3be270e740fb95cbc4eacb52f4d7
authored by Rongrong Zhong from https://github.com/facebook/mysql-5.6
This fixes MySQL Bug #68220 innodb_rows_updated is misleading on slave
http://bugs.mysql.com/bug.php?id=68220
Added innodb_system_rows_read/inserted/updated/deleted counters
that are the equivalent of innodb_rows_* but that only account for
changes made to system databases (mysql, information_schame and
preformance_schema). These counters will be used on slaves to
differentiated the updates made on system databases from those made on
user databases.
innodb_rows_* status counters are not updated when innodb_system_rows_*
are updated.
dd2d11be7a
Merged Facebook commit ecff018632c6db49bad73d9233c3cdc9f41430e9
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
This change is to fix: http://bugs.mysql.com/62534
This makes innodb_max_dirty_pages_pct a double with min,default,max values
0.001, 75, 99.999.
This also makes innodb_max_dirty_pages_pct_lwm and adaptive_flushing_lwm
doubles, as these sysvars are inter-dependent.
Added more to the BUFFER POOL AND MEMORY section of SHOW INNODB STATUS:
Percent pages dirty: X.X
This is all n_dirty_pages / used_pages
Percent all pages dirty: X.X
This is all n_dirty_pages / all-pages
Max dirty pages percent: X.X
This is innodb_max_dirty_pages_pct
Also changed all of buf from 2 to 3 digits of precision (%.2f -> %.3f).
Merge Facebook commit f981a51a47519b0ba527917887f8adc6df9ae147
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6.
This just moves some structure definitions from inside a
single .cc file to a shared .h file, with a few tweaks to
allow these structures to be shared.
On its own, it should have no actual effect. This is needed later.
Merge Facebook commit 25295d003cb0c17aa8fb756523923c77250b3294
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
This adds a pointer to the trx to each mtr.
This allows the trx to be accessed in parts of the code
where it was otherwise not available. This is needed later.
compressed pages
buf_flush_LRU() returns the number of pages processed. There are
two types of processing that can happen. A page can get evicted or
a page can get flushed. These two numbers are quite distinct and
should not be mixed.
Merge Facebook commit 926a077b14b73c14094de7fc7aa913241b801b4d
authored by Inaam Rana from https://github.com/facebook/mysql-5.6.
This is fix for upstream bugs
http://bugs.mysql.com/bug.php?id=71988http://bugs.mysql.com/bug.php?id=70500
page_cleaner should work whether or not there is server activity.
Its iterations become a noop when there is no work to do but we
should not tie it to the server activity.
The page_cleaner thread does spurious background flushing
because of conditional sleep between iterations. The solution
is not to make sleep dependent on server activity etc.
Merged Facebooks commit 6e06bbfa315ffb97d713dd6e672d6054036ddc21
authored by Inaam Rana from https://github.com/facebook/mysql-5.6.
Fixes MySQL bug http://bugs.mysql.com/bug.php?id=72123
lock_timeout thread works in a tight loop waking up every second
and checking for lock_wait_timeout. In addition, when a mysql
thread is forced to wait on a lock, it signals the lock_timeout thread
as well. This call is not required. In a heavily contended workload
each thread going to wait will signal the lock_timeout thread making
it work all the time. As lock_timeout thread scans the array of
waiting threads under lock_sys::wait_mutex which is already very
hot in contneded loads, these extra scans can cause significanct
performance regression.
Also, in various codepaths lock_timeout thread is signalled where
actual intention was to signal the innodb monitor thread.
Merged Facebook commit bdab302a7e3c37da21a1bffe1550cdbe6c906695
by Inaam Rana from https://github.com/facebook/mysql-5.6.
In os_event_wait_time_low() the logic to calculate abs_time
for wait is broken. The bug has been present at least since
5.5. It gets acutely sensitized when sub-second wait intervals
are passed. It is particularly relevant to us because the
page_cleaner thread will mostly request sub-second wait
intervals. This can potentially lead to a near tight loop
behaviour of page_cleaner with much less sleep then what we'd
actually expect.
When UNIV_INTERN is missing in built-in XtraDB, this causes the
innodb_plugin to call the XtraDB version of the function instead
of its own (seen in --embedded-server test failure in Buildbot).
This in turn causes bad things to happen in case of difference
between XtranDB and innodb_plugin.
Bug#17959689: MAKE GCC AND CLANG GIVE CONSISTENT COMPILATION WARNINGS
Bug#18313717: ENABLE -WERROR IN MAINTANER MODE WHEN COMPILING WITH CLANG
Bug#18510941: REMOVE CMAKE WORKAROUNDS FOR OLDER VERSIONS OF OS X/XCODE
Backport from mysql-5.6 to mysql-5.5
Bug#17959689: MAKE GCC AND CLANG GIVE CONSISTENT COMPILATION WARNINGS
Bug#18313717: ENABLE -WERROR IN MAINTANER MODE WHEN COMPILING WITH CLANG
Bug#18510941: REMOVE CMAKE WORKAROUNDS FOR OLDER VERSIONS OF OS X/XCODE
Backport from mysql-5.6 to mysql-5.5
(lock != ctx->wait_lock)
References: lp:1364840 lp:1280896 - reverted a part of fix for
lp:1280896 (updating a unique key can cause parallel applying to hang )
in revision #4105. This "BF (brute force) lock skipping" caused
regression which surfaced in randgen test for bug lp:1364840
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
you the progress of inplace alter table and row log buffer usage
- (x 100%, it's 4-digit. 10000 means 100.00%)
- Innodb_onlineddl_rowlog_rows
Shows how many rows are stored in row log buffer.
- Innodb_onlineddl_rowlog_pct_used
Shows row log buffer usage in percent ( *100%, it's 4-digit. 10000 means 100.00% ).
- Innodb_onlineddl_pct_progress
Shows the progress of inplace alter table. It might
be not so accurate because inplace alter is highly
depend on disk and buffer pool status.
But still it is useful and better than nothing.
- Add some log for inplace alter table
XtraDB/InnoDB will print some message before and
after doing some task.
FROM A FUNCTION
Scenario:
In a stored procedure, CREATE TABLE statement is not allowed. But an
exception is provided for CREATE TEMPORARY TABLE. We can create a temporary
table in a stored procedure.
Let there be two stored functions f1 and f2 and two stored procedures p1 and
p2. Their properties are as follows:
. stored function f1() calls stored procedure p1().
. stored function f2() calls stored procedure p2().
. stored procedure p1() creates temporary table t1.
. stored procedure p2() does DML on t1.
Consider the following situation:
1. Autocommit mode is on.
2. select f1()
3. select f2()
Step 2: In this step, t1 would be created via p1(). A table level transaction
lock would have been taken. The ::external_lock() would not have been called
on this table. At the end of step 2, because of autocommit mode on, this table
level lock will be released.
Step 3: When we execute DML on table t1 via p2() we have two problems:
Problem 1:
The function ha_innobase::external_lock() would have been called but since
it is a select query no table level locks would have been taken. Hence the
following assert will fail:
ut_ad(lock_table_has(thr_get_trx(thr), index->table, LOCK_IX));
Solution:
The solution would be to identify this situation and take a table level lock
and use the proper lock type prebuilt->select_lock_type = LOCK_X for DML
operations.
Problem 2:
Another problem is that in step 3, ha_innobase::open() is never called on
the table t1.
Solution:
The solution would be to identify this situation and call re-init the handler
of table t1.
rb#6429 approved by Krunal.
FROM A FUNCTION
Scenario:
In a stored procedure, CREATE TABLE statement is not allowed. But an
exception is provided for CREATE TEMPORARY TABLE. We can create a temporary
table in a stored procedure.
Let there be two stored functions f1 and f2 and two stored procedures p1 and
p2. Their properties are as follows:
. stored function f1() calls stored procedure p1().
. stored function f2() calls stored procedure p2().
. stored procedure p1() creates temporary table t1.
. stored procedure p2() does DML on t1.
Consider the following situation:
1. Autocommit mode is on.
2. select f1()
3. select f2()
Step 2: In this step, t1 would be created via p1(). A table level transaction
lock would have been taken. The ::external_lock() would not have been called
on this table. At the end of step 2, because of autocommit mode on, this table
level lock will be released.
Step 3: When we execute DML on table t1 via p2() we have two problems:
Problem 1:
The function ha_innobase::external_lock() would have been called but since
it is a select query no table level locks would have been taken. Hence the
following assert will fail:
ut_ad(lock_table_has(thr_get_trx(thr), index->table, LOCK_IX));
Solution:
The solution would be to identify this situation and take a table level lock
and use the proper lock type prebuilt->select_lock_type = LOCK_X for DML
operations.
Problem 2:
Another problem is that in step 3, ha_innobase::open() is never called on
the table t1.
Solution:
The solution would be to identify this situation and call re-init the handler
of table t1.
rb#6429 approved by Krunal.
Problem:
Creation of a table fails when innodb_strict_mode is enabled, but the same
table is created without any warning when innodb_strict_mode is enabled.
Solution:
If creation of a table fails with an error when innodb_strict_mode is
enabled, it must issue a warning when innodb_strict_mode is disabled.
rb#6723 approved by Krunal.
Problem:
Creation of a table fails when innodb_strict_mode is enabled, but the same
table is created without any warning when innodb_strict_mode is enabled.
Solution:
If creation of a table fails with an error when innodb_strict_mode is
enabled, it must issue a warning when innodb_strict_mode is disabled.
rb#6723 approved by Krunal.
- after a change in 5.6.20, tests with big blobs require bigger
innodb_log_file_size value;
- innobase relay was running with the default InnoDB (XtraDB)
file trx0trx.ic line 60
Problem was that trx might have not been started when we enter release
savepoint, this can happen when trx with savepoint is already aborted
or when we try to release non-existing savepoint.
CHECK.
Analysis:
----------
Issue here is, while creating or altering the InnoDB table,
if the foreign key defined on the table references a parent
table on which the user has no access privileges then the
table is created without reporting any error.
Currently the privilege level REFERENCES_ACL is unused
and is not used for access evaluation while creating the
table with a foreign key constraint or adding the foreign
key constraint to a table. But when no privileges are granted
to user then also access evaluation on parent table is ignored.
Fix:
---------
For DMLs, irrelevant of the fact, support does not want any
changes to avoid permission checks on every operation.
So, as a fix, added a function "check_fk_parent_table_access"
to check whether any of the SELECT_ACL, INSERT_ACL, UDPATE_ACL,
DELETE_ACL or REFERENCE_ACL privileges are granted for user
at table level. If none of them is granted then error is reported.
This function is called during the table creation and alter
operation.
CHECK.
Analysis:
----------
Issue here is, while creating or altering the InnoDB table,
if the foreign key defined on the table references a parent
table on which the user has no access privileges then the
table is created without reporting any error.
Currently the privilege level REFERENCES_ACL is unused
and is not used for access evaluation while creating the
table with a foreign key constraint or adding the foreign
key constraint to a table. But when no privileges are granted
to user then also access evaluation on parent table is ignored.
Fix:
---------
For DMLs, irrelevant of the fact, support does not want any
changes to avoid permission checks on every operation.
So, as a fix, added a function "check_fk_parent_table_access"
to check whether any of the SELECT_ACL, INSERT_ACL, UDPATE_ACL,
DELETE_ACL or REFERENCE_ACL privileges are granted for user
at table level. If none of them is granted then error is reported.
This function is called during the table creation and alter
operation.
MDEV-6483 - Deadlock around rw_lock_debug_mutex on PPC64
This problem affects only debug builds on PPC64.
There are at least two race conditions around
rw_lock_debug_mutex_enter and rw_lock_debug_mutex_exit:
- rw_lock_debug_waiters was loaded/stored without setting
appropriate locks/memory barriers.
- there is a gap between calls to os_event_reset() and
os_event_wait() and in such case we're supposed to pass
return value of the former to the latter.
Fixed by replacing self-cooked spinlocks with system mutexes.
These days system mutexes offer much better performance. OTOH
performance is not that critical for debug builds.
MDEV-6450 - MariaDB crash on Power8 when built with advance tool
chain
InnoDB mutex_exit() function calls __sync_test_and_set() to release
the lock. According to manual this function is supposed to create
"acquire" memory barrier whereas in fact we need "release" memory
barrier at mutex_exit().
The problem isn't repeatable with gcc because it creates
"acquire-release" memory barrier for __sync_test_and_set().
ATC creates just "acquire" barrier.
Fixed by creating proper barrier at mutex_exit() by using
__sync_lock_release() instead of __sync_test_and_set().
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Problem:
We maintain two rb trees in each dict_table_t. The foreign_rbt must be in
sync with foreign_list. The referenced_rbt must be in sync with
referenced_list. There is one function which checks this consistency and it
failed, resulting in an assert failure.
The root cause of the problem was identified that the search order was
lost in the referenced_rbt. This is because while renaming the table,
we didn't not refresh this referenced_rbt.
Solution:
When a foreign key is renamed, we must delete and re-insert into both
foreign_rbt and referenced_rbt.
rb#6412 approved by Jimmy.
Problem:
We maintain two rb trees in each dict_table_t. The foreign_rbt must be in
sync with foreign_list. The referenced_rbt must be in sync with
referenced_list. There is one function which checks this consistency and it
failed, resulting in an assert failure.
The root cause of the problem was identified that the search order was
lost in the referenced_rbt. This is because while renaming the table,
we didn't not refresh this referenced_rbt.
Solution:
When a foreign key is renamed, we must delete and re-insert into both
foreign_rbt and referenced_rbt.
rb#6412 approved by Jimmy.
Analysis: When database is migrated from 5.5 or earlier and
database needs crash recovery, there is possibility that
SYS_DATAFILES system table does not exists, but
crash recovery in function dict_check_tablespaces_and_store_max_id()
assumes that SYS_DATAFILES exists.
Fix: If SYS_DATAFILES does not exists, create it before
we end up to function dict_check_tablespaces_and_store_max_id()
on crash recovery.
Analysis: Problem is that we execute galera code when we are actually
executing asyncronoush replication.
Fix: Do not execute galera code if wsrep provider is not set.
Part of this work is based on Stewart Smitch's memory barrier and lower priori
patches for power8.
- Added memory syncronization for innodb & xtradb for power8.
- Added HAVE_WINDOWS_MM_FENCE to CMakeList.txt
- Added os_isync to fix a syncronization problem on power
- Added log_get_lsn_nowait which is now used srv_error_monitor_thread to ensur
if log mutex is locked.
All changes done both for InnoDB and Xtradb
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
A donor node does a flush tables and then tries to
freeze innodb writes before proceeding with SST.
However, innodb_disallow_writes was missing in xtradb.
Merged 'InnodbFreeze' patch from maria-5.5-galera's to
xtradb. Also, merged some changes missing in innobase's
os0file.cc.
Added a basic test case for innodb_disallow_writes system
variable.
tool chain
This is an addition to the original patch. On Windows
InterlockedExchange implies full memory barrier, whereas
only acquire/release barriers required.
buf0buf.cc line 2642.
Analysis: innodb_compression_algorithm is a global variable and
can change while we are building page compressed page. This could
lead page corruption.
Fix: Cache innodb_compression_algorithm on local variable before
doing any compression or page formating to avoid concurrent
change. Improved page verification on debug builds.
Analysis: InnoDB writes also files that do not contain FIL-header.
This could lead incorrect analysis on os_fil_read_func function
when it tries to see is page page compressed based on FIL_PAGE_TYPE
field on FIL-header. With bad luck uncompressed page that does
not contain FIL-headed, the byte on FIL_PAGE_TYPE position could
indicate that page is page comrpessed.
Fix: Upper layer must indicate is file space page compressed
or not. If this is not yet known, we need to read the FIL-header
and find it out. Files that we know that are not page compressed
we can always just provide FALSE.
4229: MDEV-5670: Assertion failure in file buf0lru.c line 2355
Add more status information if repeatable.
4230: MDEV-5673: Crash while parallel dropping multiple tables under heavy load
Improve long semaphore wait output to include all semaphore waits
and try to find out if there is a sequence of waiters.
4233: Fix compiler errors on product build.
4237: Fix too agressive long semaphore wait output and add guard against introducing
compression failures on insert buffer.
4238: Fix test failure caused by simulated compression failure on
IBUF_DUMMY table.
This problem affects only debug builds on PPC64.
There are at least two race conditions around
rw_lock_debug_mutex_enter and rw_lock_debug_mutex_exit:
- rw_lock_debug_waiters was loaded/stored without setting
appropriate locks/memory barriers.
- there is a gap between calls to os_event_reset() and
os_event_wait() and in such case we're supposed to pass
return value of the former to the latter.
Fixed by replacing self-cooked spinlocks with system mutexes.
These days system mutexes offer much better performance. OTOH
performance is not that critical for debug builds.
If mysql.innodb_table_stats or mysql.innodb_index_stats is not found or has
unexpected structure output that error only once and no other error for
every table trying to use them. If they do exists, then print fetch or
recalculation errors only once / table or index.
line 8473
In case InnoDB index is not found, print the MySQL and InnoDB index
name we were trying to find and all MySQL and InnoDB index names there
is for this table.
ha_innodb.cc line 8473
If index is not found from InnoDB make sure we print what we
were trying to find and all mysql and InnoDB index names there
is for this table.
chain
InnoDB mutex_exit() function calls __sync_test_and_set() to release
the lock. According to manual this function is supposed to create
"acquire" memory barrier whereas in fact we need "release" memory
barrier at mutex_exit().
The problem isn't repeatable with gcc because it creates
"acquire-release" memory barrier for __sync_test_and_set().
ATC creates just "acquire" barrier.
Fixed by creating proper barrier at mutex_exit() by using
__sync_lock_release() instead of __sync_test_and_set().
Merge the patches into MariaDB 10.0 main.
With this patch, parallel replication will now automatically retry a
transaction that fails due to deadlock or other temporary error, same as
single-threaded replication.
We catch deadlocks with InnoDB transactions due to enforced commit order. If
T1 must commit before T2 in parallel replication and T1 ends up waiting for T2
inside InnoDB, we kill T2 and retry it later to resolve the deadlock
automatically.
After-review changes.
For this patch in 10.0, we do not introduce a new public storage engine API,
we just fix the InnoDB/XtraDB issues. In 10.1, we will make a better public
API that can be used for all storage engines (MDEV-6429).
Eliminate the background thread that did deadlock kills asynchroneously.
Instead, we ensure that the InnoDB/XtraDB code can handle doing the kill from
inside the deadlock detection code (when thd_report_wait_for() needs to kill a
later thread to resolve a deadlock).
(We preserve the part of the original patch that introduces dedicated mutex
and condition for the slave init thread, to remove the abuse of
LOCK_thread_count for start/stop synchronisation of the slave init thread).
IN RECOVERY
During redo log processing, the data dictionary is not available. We should
check it in dict_find_table_by_space() to prevent SEGV error.
rb#5678, approved by Jimmy.
IN RECOVERY
During redo log processing, the data dictionary is not available. We should
check it in dict_find_table_by_space() to prevent SEGV error.
rb#5678, approved by Jimmy.
Problem:
When a unique secondary index is scanned for duplicate checking, gap locks
were not taken if the transaction had isolation level <= READ COMMITTED.
This change was done while fixing Bug #16133801 UNEXPLAINABLE INNODB UNIQUE
INDEX LOCKS ON DELETE + INSERT WITH SAME VALUES (rb#2035). Because of this
the duplicate check logic failed, and resulted in duplicate values in unique
secondary index.
Solution:
When a unique secondary index is scanned for duplicate checking, gap locks
must be taken irrespective of the transaction isolation level. This is
achieved by reverting rb#2035.
rb#5910 approved by Jimmy
Problem:
When a unique secondary index is scanned for duplicate checking, gap locks
were not taken if the transaction had isolation level <= READ COMMITTED.
This change was done while fixing Bug #16133801 UNEXPLAINABLE INNODB UNIQUE
INDEX LOCKS ON DELETE + INSERT WITH SAME VALUES (rb#2035). Because of this
the duplicate check logic failed, and resulted in duplicate values in unique
secondary index.
Solution:
When a unique secondary index is scanned for duplicate checking, gap locks
must be taken irrespective of the transaction isolation level. This is
achieved by reverting rb#2035.
rb#5910 approved by Jimmy
in file buf0mtflu.cc line 570.
Analysis: Real timing bug, we should take the mutex before we
try to send those shutdown messages, that would make sure
that threads doing a unfinished flush (they have acquired
this mutex) have time to do their work before we add shutdown
messages to work queue. Currently, we just add those shutdown
messages to work queue and code assumes that at flush, there
is constant number of items to be processed and thus
leading to assertion.
Analysis: For some reason table stats for a table pointed from a index
is not initialized. Added additional warning output on this situation
and table stats initialization. This is better than asserting.
Auto-generate the allowed list of values for enum/set/flagset options
in --help output. But don't do that when the help text already has them.
Also, remove lists of values from help strings of various options, where
they were simply listed without any additional information.
replication causing replication to fail.
Remove the temporary fix for MDEV-5914, which used READ COMMITTED for parallel
replication worker threads. Replace it with a better, more selective solution.
The issue is with certain edge cases of InnoDB gap locks, for example between
INSERT and ranged DELETE. It is possible for the gap lock set by the DELETE to
block the INSERT, if the DELETE runs first, while the record lock set by
INSERT does not block the DELETE, if the INSERT runs first. This can cause a
conflict between the two in parallel replication on the slave even though they
ran without conflicts on the master.
With this patch, InnoDB will ask the server layer about the two involved
transactions before blocking on a gap lock. If the server layer tells InnoDB
that the transactions are already fixed wrt. commit order, as they are in
parallel replication, InnoDB will ignore the gap lock and allow the two
transactions to proceed in parallel, avoiding the conflict.
Improve the fix for MDEV-6020. When InnoDB itself detects a deadlock, it now
asks the server layer for any preferences about which transaction to roll
back. In case of parallel replication with two transactions T1 and T2 fixed to
commit T1 before T2, the server layer will ask InnoDB to roll back T2 as the
deadlock victim, not T1. This helps in some cases to avoid excessive deadlock
rollback, as T2 will in any case need to wait for T1 to complete before it can
itself commit.
Also some misc. fixes found during development and testing:
- Remove thd_rpl_is_parallel(), it is not used or needed.
- Use KILL_CONNECTION instead of KILL_QUERY when a parallel replication
worker thread is killed to resolve a deadlock with fixed commit
ordering. There are some cases, eg. in sql/sql_parse.cc, where a KILL_QUERY
can be ignored if the query otherwise completed successfully, and this
could cause the deadlock kill to be lost, so that the deadlock was not
correctly resolved.
- Fix random test failure due to missing wait_for_binlog_checkpoint.inc.
- Make sure that deadlock or other temporary errors during parallel
replication are not printed to the the error log; there were some places
around the replication code with extra error logging. These conditions can
occur occasionally and are handled automatically without breaking
replication, so they should not pollute the error log.
- Fix handling of rgi->gtid_sub_id. We need to be able to access this also at
the end of a transaction, to be able to detect and resolve deadlocks due to
commit ordering. But this value was also used as a flag to mark whether
record_gtid() had been called, by being set to zero, losing the value. Now,
introduce a separate flag rgi->gtid_pending, so rgi->gtid_sub_id remains
valid for the entire duration of the transaction.
- Fix one place where the code to handle ignored errors called reset_killed()
unconditionally, even if no error was caught that should be ignored. This
could cause loss of a deadlock kill signal, breaking deadlock detection and
resolution.
- Fix a couple of missing mysql_reset_thd_for_next_command(). This could
cause a prior error condition to remain for the next event executed,
causing assertions about errors already being set and possibly giving
incorrect error handling for following event executions.
- Fix code that cleared thd->rgi_slave in the parallel replication worker
threads after each event execution; this caused the deadlock detection and
handling code to not be able to correctly process the associated
transactions as belonging to replication worker threads.
- Remove useless error code in slave_background_kill_request().
- Fix bug where wfc->wakeup_error was not cleared at
wait_for_commit::unregister_wait_for_prior_commit(). This could cause the
error condition to wrongly propagate to a later wait_for_prior_commit(),
causing spurious ER_PRIOR_COMMIT_FAILED errors.
- Do not put the binlog background thread into the processlist. It causes
too many result differences in mtr, but also it probably is not useful
for users to pollute the process list with a system thread that does not
really perform any user-visible tasks...
SLOW/CRASHES SEMAPHORE
Problem:
There are 2 lakh tables - fk_000001, fk_000002 ... fk_200000. All of them
are related to the same parent_table through a foreign key constraint.
When the parent_table is loaded into the dictionary cache, all the child table
will also be loaded. This is taking lot of time. Since this operation happens
when the dictionary latch is taken, the scenario leads to "long semaphore wait"
situation and the server gets killed.
Analysis:
A simple performance analysis showed that the slowness is because of the
dict_foreign_find() function. It does a linear search on two linked list
table->foreign_list and table->referenced_list, looking for a particular
foreign key object based on foreign->id as the key. This is called two
times for each foreign key object.
Solution:
Introduce a rb tree in table->foreign_rbt and table->referenced_rbt, which
are some sort of index on table->foreign_list and table->referenced_list
respectively, using foreign->id as the key. These rbt structures will be
solely used by dict_foreign_find().
rb#5599 approved by Vasil
SLOW/CRASHES SEMAPHORE
Problem:
There are 2 lakh tables - fk_000001, fk_000002 ... fk_200000. All of them
are related to the same parent_table through a foreign key constraint.
When the parent_table is loaded into the dictionary cache, all the child table
will also be loaded. This is taking lot of time. Since this operation happens
when the dictionary latch is taken, the scenario leads to "long semaphore wait"
situation and the server gets killed.
Analysis:
A simple performance analysis showed that the slowness is because of the
dict_foreign_find() function. It does a linear search on two linked list
table->foreign_list and table->referenced_list, looking for a particular
foreign key object based on foreign->id as the key. This is called two
times for each foreign key object.
Solution:
Introduce a rb tree in table->foreign_rbt and table->referenced_rbt, which
are some sort of index on table->foreign_list and table->referenced_list
respectively, using foreign->id as the key. These rbt structures will be
solely used by dict_foreign_find().
rb#5599 approved by Vasil
replication causing replication to fail.
In parallel replication, we run transactions from the master in parallel, but
force them to commit in the same order they did on the master. If we force T1
to commit before T2, but T2 holds eg. a row lock that is needed by T1, we get
a deadlock when T2 waits until T1 has committed.
Usually, we do not run T1 and T2 in parallel if there is a chance that they
can have conflicting locks like this, but there are certain edge cases where
it can occasionally happen (eg. MDEV-5914, MDEV-5941, MDEV-6020). The bug was
that this would cause replication to hang, eventually getting a lock timeout
and causing the slave to stop with error.
With this patch, InnoDB will report back to the upper layer whenever a
transactions T1 is about to do a lock wait on T2. If T1 and T2 are parallel
replication transactions, and T2 needs to commit later than T1, we can thus
detect the deadlock; we then kill T2, setting a flag that causes it to catch
the kill and convert it to a deadlock error; this error will then cause T2 to
roll back and release its locks (so that T1 can commit), and later T2 will be
re-tried and eventually also committed.
The kill happens asynchroneously in a slave background thread; this is
necessary, as the reporting from InnoDB about lock waits happen deep inside
the locking code, at a point where it is not possible to directly call
THD::awake() due to mutexes held.
Deadlock is assumed to be (very) rarely occuring, so this patch tries to
minimise the performance impact on the normal case where no deadlocks occur,
rather than optimise the handling of the occasional deadlock.
Also fix transaction retry due to deadlock when it happens after a transaction
already signalled to later transactions that it started to commit. In this
case we need to undo this signalling (and later redo it when we commit again
during retry), so following transactions will not start too early.
Also add a missing thd->send_kill_message() that got triggered during testing
(this corrects an incorrect fix for MySQL Bug#58933).
This patch allows up to 64K pages for tables with DYNAMIC, COMPACT
and REDUNDANT row types. Tables with COMPRESSED row type allows
still only <= 16K page size. Note that single row size must be
still <= 16K and max key length is not affected.
Analysis: Can't disable the error message because you may get database
started with incorrect log file size.
Fix: Thus only improve the error message to give more information
to users.
