Additional fixes for possible overflows in length-related
calculations in 'spatial' implementations.
Checks added to the ::get_data_size() methods.
max_n_points decreased to occupy less 2G size. An
object of that size is practically inoperable anyway.
Item_func_make_set wasn't taking into account the first argument when
calculating maybe_null.
sql/item_strfunc.cc:
rewrite Item_func_make_set, removing separate storage of the first argument
sql/item_strfunc.h:
rewrite Item_func_make_set, removing separate storage of the first argument
The bug was found by Alyssa Milburn.
If the number of points of a geometry feature read from
binary representation is greater than 0x10000000, then
the (uint32) (num_points * 16) will cut the higher byte,
which leads to various errors.
Fixed by additional check if (num_points > max_n_points).
MySQL Bug #12408412: GROUP_CONCAT + ORDER BY + INPUT/OUTPUT SAME USER VARIABLE = CRASH
and
MySQL Bug#14664077 SEVERE PERFORMANCE DEGRADATION IN SOME CASES WHEN USER VARIABLES ARE USED
sql/item_func.cc:
don't use anything from Item_func_set_user_var::fix_fields()
in Item_func_set_user_var::save_item_result()
sql/sql_class.cc:
Call suv->save_item_result(item) *before* doing suv->fix_fields(), because
the former evaluates the item (and caches its value), while the latter marks
the user variable as non-const. The problem is that the item was fix_field'ed
when the user variable was const, and it doesn't expect it to change to non-const
in the middle of the execution.
mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
Analysis:
Range analysis discoveres that the query can be executed via loose index scan for GROUP BY.
Later, GROUP BY analysis fails to confirm that the GROUP operation can be computed via an
index because there is no logic to handle duplicate field references in the GROUP clause.
As a result the optimizer produces an inconsistent plan. It constructs a temporary table,
but on the other hand the group fields are not set to point there.
Solution:
Make loose scan analysis work in sync with order by analysis. In the case of duplicate
columns loose scan will not be applicable. This limitation will be lifted in 10.0 by
removing duplicate columns.
This bug could result in returning 0 for the expressions of the form
<aggregate_function>(distinct field) when the system variable
max_heap_table_size was set to a small enough number.
It happened because the method Unique::walk() did not support
the case when more than one pass was needed to merge the trees
of distinct values saved in an external file.
Backported a fix in grant_lowercase.test from mariadb 5.5.
Early evaluation of subqueries in the WHERE conditions on I_S.*_STATUS tables,
otherwise the subquery on this same table will try to acquire LOCK_status twice.
Problem:
Before the ALTER TABLE statement, the array
dict_index_t::stat_n_diff_key_vals had proper values calculated
and updated. But after the ALTER TABLE statement, all the values
of this array is 0.
Because of this statistics returned by innodb_rec_per_key() is
different before and after the ALTER TABLE statement. Running the
ANALYZE TABLE command populates the statistics correctly.
Solution:
After ALTER TABLE statement, set the flag dict_table_t::stat_initialized
correctly so that the table statistics will be recalculated properly when
the table is next loaded. But note that we still don't choose the loose
index scans. This fix only ensures that an ALTER TABLE does not change
the optimizer plan.
rb://1639 approved by Marko and Jimmy.
patch to fix post push falures in pb2
BUG#15872504 - REMOVE MYSQL-TEST/INCLUDE/GET_BINLOG_DUMP_THREAD_ID.INC
=== Problem ===
The file named "mysql-test/include/get_binlog_dump_thread_id.inc" is not
used anywhere. In any case, this file does wrong things in the wrong way:
1) The file seems to assume there is only one dump thread, but there may
be many.
2) you can get this information in a much easier way using the command:
"select thread_id from threads where processlist_command="Binlog Dump";"
=== Fix ===
removed file 'mysql-test/include/get_binlog_dump_thread_id.inc'
RPL_ROW_UNTIL TIMES OUT
patch to fix post push falures in pb2
mysql-test/suite/rpl/r/rpl_row_until.result:
changes to account for the changes made in
corresponding test file.
mysql-test/suite/rpl/t/disabled.def:
disabled test in macosx
mysql-test/suite/rpl/t/rpl_row_until.test:
replaced static relayy log file by an mtr variable
which saves the name of relay log file.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
mysql-test/suite/engines/funcs/r/rpl_row_until.result:
modified to accomodate the changes in corresponding
test file.
mysql-test/suite/engines/funcs/t/disabled.def:
removed from the list of disabled tests.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
fixed rpl.rpl_row_until and copied its content to
engines/funcs.rpl_row_until. The reason being both
are same tests but rpl.rpl_row_until is an
updated version.
mysql-test/suite/rpl/t/disabled.def:
removed from the list of disabled tests.
sql/sql_repl.cc:
Added a check to catch an improper combination
of arguements passed to 'START SLAVE UNTIL'. Earlier,
START SLAVE UNTIL MASTER_LOG_FILE='master-bin.000001',
MASTER_LOG_POS=561, RELAY_LOG_POS=12;
passed. It is now detected and an error is reported.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
mysql-test/r/partition.result:
Added test case
mysql-test/t/partition.test:
Added test case
sql/ha_partition.cc:
Removed printing of not initialized variable
storage/maria/ha_maria.cc:
Don't copy variables that are not initialized
main.mysqlbinlog_row_innodb are skipped by mtr
=== Problem ===
The following tests are wrongly placed in main suite and as a
result these are not run with proper binlog format combinations.
Some are always skipped by mtr.
1) mysqlbinlog_row_myisam
2) mysqlbinlog_row_innodb
3) mysqlbinlog_row.test
4) mysqlbinlog_row_trans.test
5) mysqlbinlog-cp932
6) mysqlbinlog2
7) mysqlbinlog_base64
=== Background ===
mtr runs the tests placed in main suite with binlog format=stmt.
Those that need to be tested against binlog format=row or mixed
or more than one binlog format and require only one mysql server
are placed in binlog suite. mtr runs tests in binlog suite with
all three binlog formats(stmt,row and mixed).
=== Fix ===
1) Moved the test listed in problem section above to binlog suite.
2) Added prefix "binlog_" to the name of each test case moved.
Renamed the coresponding result files and option files accordingly.
mysql-test/extra/binlog_tests/mysqlbinlog_row_engine.inc:
include file for mysqlbinlog_row_myisam.test and
mysqlbinlog_row_myisam.test which are being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog-cp932.result:
result file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog2.result:
result file for mysqlbinlog2.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_base64.result:
result file for mysqlbinlog_base64.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row.result:
result file for mysqlbinlog_row.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_innodb.result:
result file for mysqlbinlog_row_innodb.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_myisam.result:
result file for mysqlbinlog_row_myisam.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_trans.result:
result file for mysqlbinlog_row_trans.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932-master.opt:
option file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog2.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_base64.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_innodb.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_myisam.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_trans.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
-----------
After compiling from source, during make test I got the following error:
test main.loaddata failed with error
CURRENT_TEST: main.loaddata
mysqltest: At line 592: query 'LOAD DATA INFILE 'tmpp.txt' INTO TABLE t1
CHARACTER SET ucs2
(@b) SET a=REVERSE(@b)' failed: 1115: Unknown character set: 'ucs2'
I noticed other tests are skipped because of no ucs2
main.mix2_myisam_ucs2 [ skipped ] Test requires:'
have_ucs2'
Should main.loaddata be skipped if there is no ucs2
How To Repeat:
-------------
Run make test on compiled source that doesn't have ucs2
Suggested fix:
-------------
the failing piece of the test should be moved from mysql-test/t/loaddata.test to
mysql-test/t/ctype_ucs.test.
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
THOUGH IT IS NOT.
The following error message is misleading because it claims
that the BLOB space is not counted.
"ERROR 1118 (42000): Row size too large. The maximum row size for
the used table type, not counting BLOBs, is 8126. You have to
change some columns to TEXT or BLOBs"
When the ROW_FORMAT=compact or ROW_FORMAT=REDUNDANT is used,
the BLOB prefix is stored inline along with the row. So
the above error message is changed as follows depending on
the row format used:
For ROW_FORMAT=COMPRESSED or ROW_FORMAT=DYNAMIC, the error
message is as follows:
"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB may help. In current row format,
BLOB prefix of 0 bytes is stored inline."
For ROW_FORMAT=COMPACT or ROW_FORMAT=REDUNDANT, the error
message is as follows:
"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB or using ROW_FORMAT=DYNAMIC or
ROW_FORMAT=COMPRESSED may help. In current row
format, BLOB prefix of 768 bytes is stored inline."
rb://1252 approved by Marko Makela
CONNECTIONS IF SPE
Problem description: -ssl-key value is not validated, you can assign any bogus
text to --ssl-key and it is not verified that it exists, and more importantly,
it allows the client to connect to mysqld.
Fix: Added proper validations checks for --ssl-key.
Note:
1) Documentation changes require for 5.1, 5.5, 5.6 and trunk in the sections
listed below and the details are :
http://dev.mysql.com/doc/refman/5.6/en/ssl-options.html#option_general_ssl
and
REQUIRE SSL section of
http://dev.mysql.com/doc/refman/5.6/en/grant.html
2) Client having with option '--ssl', should able to get ssl connection. This
will be implemented as part of separate fix in 5.6 and trunk.
Problem description:
Table 't' created with two colums having compound index on both the
columns under innodb/myisam engine at remote machine. In the local
machine same table is created undet the federated engine.
A select having where clause with along 'AND' operation gives wrong
results on local machine.
Analysis:
The given query at federated engine is wrongly transformed by
federated::create_where_from_key() function and the same was sent to
the remote machine. Hence the local machine is showing wrong results.
Given query "select c1 from t where c1 <= 2 and c2 = 1;"
Query transformed, after ha_federated::create_where_from_key() function is:
SELECT `c1`, `c2` FROM `t` WHERE (`c1` IS NOT NULL ) AND
( (`c1` >= 2) AND (`c2` <= 1) ) and the same sent to real_query().
In the above the '<=' and '=' conditions were transformed to '>=' and
'<=' respectively.
ha_federated::create_where_from_key() function behaving as below:
The key_range is having both the start_key and end_key. The start_key
is used to get "(`c1` IS NOT NULL )" part of the where clause, this
transformation is correct. The end_key is used to get "( (`c1` >= 2)
AND (`c2` <= 1) )", which is wrong, here the given conditions('<=' and '=')
are changed as wrong conditions('>=' and '<=').
The end_key is having {key = 0x39fa6d0 "", length = 10, keypart_map = 3,
flag = HA_READ_AFTER_KEY}
The store_length is having value '5'. Based on store_length and length
values the condition values is applied in HA_READ_AFTER_KEY switch case.
The switch case 'HA_READ_AFTER_KEY' is applicable to only the last part of
the end_key and for previous parts it is going to 'HA_READ_KEY_OR_NEXT' case,
here the '>=' is getting added as a condition instead of '<='.
Fix:
Updated the 'if' condition in 'HA_READ_AFTER_KEY' case to affect for all
parts of the end_key. i.e 'i > 0' will used for end_key, Hence added it in
the if condition.
mysql-test/suite/federated/federated.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_archive.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_13118.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_25714.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_35333.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_debug.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_innodb.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_server.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_transactions.test:
modified the federated.inc file location
mysql-test/suite/federated/include/federated.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/federated_cleanup.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/have_federated_db.inc:
moved the file from federated suite to federated/include folder
storage/federated/ha_federated.cc:
updated the 'if condition' in ha_federated::create_where_from_key()
function.
Backporting the WL#5716, "Information schema table for InnoDB
buffer pool information". Backporting revisions 2876.244.113,
2876.244.102 from mysql-trunk.
rb://1175 approved by Jimmy Yang.
"ORDER BY" AND "LIMIT BY" CLAUSE
PROBLEM:
When a 'limit' clause is specified in a query along with
group by and order by, optimizer chooses wrong index
there by examining more number of rows than required.
However without the 'limit' clause, optimizer chooses
the right index.
ANALYSIS:
With respect to the query specified, range optimizer chooses
the first index as there is a range present ( on 'a'). Optimizer
then checks for an index which would give records in sorted
order for the 'group by' clause.
While checking chooses the second index (on 'c,b,a') based on
the 'limit' specified and the selectivity of
'quick_condition_rows' (number of rows present in the range)
in 'test_if_skip_sort_order' function.
But, it fails to consider that an order by clause on a
different column will result in scanning the entire index and
hence the estimated number of rows calculated above are
wrong (which results in choosing the second index).
FIX:
Do not enforce the 'limit' clause in the call to
'test_if_skip_sort_order' if we are creating a temporary
table. Creation of temporary table indicates that there would be
more post-processing and hence will need all the rows.
This fix is backported from 5.6. This problem is fixed in 5.6 as
part of changes for work log #5558
mysql-test/r/subselect.result:
Changes for Bug#11762052 results in the correct number of rows.
sql/sql_select.cc:
Do not pass the actual 'limit' value if 'need_tmp' is true.
This is a followup patch for the bug enabling the test
i_binlog.binlog_mysqlbinlog_file_write.test
this was disabled in mysql trunk and mysql 5.5 as in the release
build mysqlbinlog was not debug compiled whereas the mysqld was.
Since have_debug.inc script checks only for mysqld to be debug
compiled, the test was not being skipped on release builds.
We resolve this problem by creating a new inc file
mysqlbinlog_have_debug.inc which checks exclusively for mysqlbinlog
to be debug compiled. if not it skips the test.
mysql-test/include/mysqlbinlog_have_debug.inc:
new inc file to check if mysqlbinlog is debug compiled.
