If using statement based replication (SBR), repeatedly calling
statements which are unsafe for SBR will cause a warning message
to be written to the error for each statement. This might lead
to filling up the error log and there is no way to disable this
behavior.
The solution is to only log these message (about statements unsafe
for statement based replication) if the log_warnings option is set.
For example:
SET GLOBAL LOG_WARNINGS = 0;
INSERT INTO t1 VALUES(UUID());
SET GLOBAL LOG_WARNINGS = 1;
INSERT INTO t1 VALUES(UUID());
In this case the message will be printed only once:
[Warning] Statement may not be safe to log in statement format.
Statement: INSERT INTO t1 VALUES(UUID())
If the log_bin_trust_function_creators option is not defined, creating a stored
function requires either one of the modifiers DETERMINISTIC, NO SQL, or READS
SQL DATA. Executing a stored function should also follows the same rules if in
STATEMENT mode. However, this was not happening and a wrong error was being
printed out: ER_BINLOG_ROW_RBR_TO_SBR.
The patch makes the creation and execution compatible and prints out the correct
error ER_BINLOG_UNSAFE_ROUTINE when a stored function without one of the modifiers
above is executed in STATEMENT mode.
to wrong result
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).
binlog
The fix for BUG 43929 introduced a regression issue. In a nutshell, when a
statement that changes a non-transactional table fails, it is written to the
binary log with the error code appended. Unfortunately, after BUG 43929, this
failure was flushing the transactional chace causing mismatch between execution
and logging histories. To fix this issue, we avoid flushing the transactional
cache when a commit or rollback is not issued.
The "get_master_version_and_clock(...)" function in sql/slave.cc ignores
error and passes directly when queries fail, or queries succeed
but the result retrieved is empty.
The "get_master_version_and_clock(...)" function should try to reconnect master
if queries fail because of transient network problems, and fail otherwise.
The I/O thread should print a warning if the some system variables do not
exist on master (very old master)
"create as select" (innodb table)
Problem: code constructing "CREATE TABLE..." statement
doesn't take into account that current database is not set
in some cases. That may lead to a server crash.
Fix: check if current database is set.
the auto_increment value
This is an alternative patch that instead of allowing RECREATE TABLE
on TRUNCATE TABLE it implements reset_auto_increment that is called
after delete_all_rows.
Note: this bug was fixed by Mattias Jonsson:
Pusing this patch: http://lists.mysql.com/commits/70370
With ibmdb2i_create_index_option set to 1, creating an IBMDB2I table
with a primary key should produce an additional index that uses EBCDIC
hexadecimal sorting. However, this does not work. Adding indexes that
are not primary keys does work. The ibmdb2i_create_index_option should
be honoured when creating a table with a primary key.
This patch adds code to the create() function to check for the value
of the ibmdb2i_create_index_option variable and, when appropriate, to
generate a *HEX-based shadow index in DB2 for the primary key. Previously
this behavior was limited to secondary indexes.
Additionally, this patch restricts the creation of shadow indexes to
cases in which a non-*HEX sort sequence is used, as the documentation
for ibmdb2i_create_index_option describes. Previously, the shadow index
would in some cases be created even when the MySQL-specific index used
*HEX sorting, leading to redundant indexes.
Finally, the code used to generate the list of fields for indexes
and the code used to generate the SQL statement for the shadow
indexes has been refactored into individual functions.
Had attempted to disable this test on Windows only, but the nature of this bug
does not allow for this. The master.opt file is processed before anything in
in the actual test. As a result, we must use disabled.def files to ensure
these tests are skipped on the problematic platforms.
Removed Windows-only code and updated the proper disabled.def files accordingly.
Some collations were causing IBMDB2I to report
inaccurate key range estimations to the optimizer
for LIKE clauses that select substrings. This can
be seen by running EXPLAIN. This problem primarily
affects multi-byte and unicode character sets.
This patch involves substantial changes to several
modules. There are a number of problems with the
character set and collation handling. These problems
have been or are being fixed, and a comprehensive
test has been included which should provide much
better coverage than there was before. This test
is enabled only for IBM i 6.1, because that version
has support for the greatest number of collations.
timeout
In STMT and MIXED modes, a statement that changes both non-transactional and
transactional tables must be written to the binary log whenever there are
changes to non-transactional tables. This means that the statement gets into the
binary log even when the changes to the transactional tables fail. In particular
, in the presence of a failure such statement is annotated with the error number
and wrapped in a begin/rollback. On the slave, while applying the statement, it
is expected the same failure and the rollback prevents the transactional changes
to be persisted.
Unfortunately, statements that fail due to concurrency issues (e.g. deadlocks,
timeouts) are logged in the same way causing the slave to stop as the statements
are applied sequentially by the SQL Thread. To fix this bug, we automatically
ignore concurrency failures on the slave. Specifically, the following failures
are ignored: ER_LOCK_WAIT_TIMEOUT, ER_LOCK_DEADLOCK and ER_XA_RBDEADLOCK.
Creating an IBMDB2I table with the macce character set
is successful, but any attempt to insert data into the
table was failing.
This was happening because the character set name "macce"
is not a valid iconv descriptor for IBM i PASE. This patch
adds an override to convertTextDesc to use the equivalent
valid iconv descriptor "IBM-1282" instead.
Some collations--including cp1250_czech_cs,latin2_czech_cs,
ucs2/utf8_czech_ci, ucs2/utf8_danish_ci--are not being
sorted correctly by the IBMDB2I storage engine. This
was being caused because the sort order used by DB2 is
incompatible with the order expected by MySQL.
This patch removes support for the cp1250_czech_cs and
latin2_czech_cs collations because it has been determined
that the sort order used by DB2 is incompatible with the
order expected by MySQL. Users needing a czech collation
with IBMDB2I are encouraged to use a Unicode-based collation
instead of these single-byte collations. This patch also
modifies the DB2 sort sequence used for ucs2/utf8_czech_ci
and ucs2/utf8_danish_ci collations to better match the
sorting expected by MySQL. This will only affect indexes
or tables that are newly created through the IBMDB2I storage
engine. Existing IBMDB2I tables will retain the old sort
sequence until recreated.
format." warnings
Despite the fact that a statement would be filtered out from binlog, a
warning would still be thrown if it was issued with the LIMIT.
This patch addresses this issue by checking the filtering rules before
printing out the warning.
Details:
- Limit the queries to character sets and collations
which are most probably available in all build types.
But try to preserve the intention of the tests.
- Remove the variants adjusted to some build types.
Note:
1. The results of the review by Bar are included.
2. I am not able to check the correctness of this patch
on any existing build type and any MySQL version.
So it could happen that the new test fails somewhere.
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
the mysql test suite.
Tests removed:
1. innodb_trx_weight.test
2. innodb_bug35220.test
Include files removed:
1. have_innodb.inc
2. ctype_innodb_like.inc
3. innodb_trx_weight.inc
Also add the missing opt file for the test innodb-use-sys-malloc.test
Created a test suite 'innodb' under mysql-test/suite/innodb for the innodb plugin tests.
test suite 'innodb' has tests only which are not under any other mysql-test suites.
Total 14 testcases are added to the test suite.
Note: the patches in storage/innodb_plugin/mysql-test/patches are not applied yet
