Since MDEV-18778, timezone tables get changed to innodb
to allow them to be replicated to other galera nodes.
Even without galera, timezone tables could be declared innodb.
With the standalone innodb tables, the mysql_tzinfo_to_sql takes
approximately 27 seconds.
With the transactions enabled in this patch, 1.2 seconds is
the approximate load time.
While explicit checks for the engine of the time zone tables could be
done, or checks against !opt_skip_write_binlog, non-transactional
storage engines will just ignore the transactional state without
even a warning so its safe to enact globally.
Leap seconds are pretty much ignored as they are a single insert
statement and have gone out of favour as they have caused MariaDB
stalls in the past.
The usage message for the innodb_compression_algorithm system variable
did not list snappy, which was added as an optional compression algorithm
in MariaDB 10.1.3 and might actually work since
commit 90c52e5291 (MDEV-12615)
in MariaDB 10.1.24.
Unfortunately, we will include also unavailable compression algorithms
in the list, because ENUM parameters allow numeric values, and we do
not want innodb_compression_algorithm=3 to change meaning depending on
the way how the source code was compiled.
InnoDB only reserves 13 bits for the heap number in the record header,
limiting the heap number to be at most 8191. But, when using
innodb_page_size=64k and secondary index records of 7 bytes each,
it is possible to exceed the maximum heap number.
btr_cur_optimistic_insert(): Let the operation fail if the
maximum number of records would be exceeded.
page_mem_alloc_heap(): Move to the same compilation unit with the
only caller, and let the operation fail if the maximum heap number
has been allocated already.
Some tests relied on the fact that DATETIME->DATE conversion
always produce a truncation (with a warning). This is not the case
when the SQL statement is executed at current time '00:00:00' sharp.
Adding a new SET TIMESTAMP statements to make sure time is not '00:00:00'.
Example of the failure:
http://buildbot.askmonty.org/buildbot/builders/bld-p9-rhel7/builds/4417/steps/mtr/logs/stdio
```
main.mysqld--help 'unix' w17 [ fail ]
Test ended at 2020-06-20 18:51:45
CURRENT_TEST: main.mysqld--help
--- /opt/buildbot-slave/bld-p9-rhel7/build/mysql-test/main/mysqld--help.result 2020-06-20 16:06:49.903604179 +0300
+++ /opt/buildbot-slave/bld-p9-rhel7/build/mysql-test/main/mysqld--help.reject 2020-06-20 18:51:44.886766820 +0300
@@ -1797,10 +1797,10 @@
sync-relay-log-info 10000
sysdate-is-now FALSE
system-versioning-alter-history ERROR
-table-cache 421
+table-cache 2000
table-definition-cache 400
-table-open-cache 421
-table-open-cache-instances 1
+table-open-cache 2000
+table-open-cache-instances 8
tc-heuristic-recover OFF
tcp-keepalive-interval 0
tcp-keepalive-probes 0
mysqltest: Result length mismatch
```
mtr: table_open_cache_basic autosized:
Lets assume that >400 are available and that
we can set the result back to the start value.
All of these system variables are autosized and can
generate MTR output differences.
Closes#1527
Removing the ORDER BY clause from the UNION when UNION is inside an IN/ALL/ANY/EXISTS subquery.
The rewrites are done for subqueries but this rewrite is not done for the fake_select of
the UNION.
Problem:- rpl_parallel2 was failing non-deterministically
Analysis:-
When FLUSH TABLES WITH READ LOCK is executed, it will allow all worker
threads to complete their ongoing transactions and then it will pause them.
At this state FTWRL will proceed to acquire global read lock. FTWRL first
blocks threads from starting new commits, then upgrades the lock to block
commit of existing transactions.
Step1:
FLUSH TABLES WITH READ LOCK - Blocks new commits
Step2:
* STOP SLAVE command enables 'force_abort=1' which unblocks workers,
they continue to execute events.
* T1: Waits in 'record_gtid' call to update 'gtid_slave_pos' table with
its current GTID, but it is blocked becuase of Step1.
* T2: Holds COMMIT lock and waits for T1 to commit.
Step3:
FLUSH TABLES WITH READ LOCK - Waiting to get BLOCK_COMMIT.
This results in deadlock. When STOP SLAVE command allows paused workers to
proceed, workers should skip the execution of all further events, similar
to 'conservative' parallel mode.
Solution:-
We will assign 1 to skip_event_group when we are aborted in do_ftwrl_wait.
rpl_parallel_entry->pause_sub_id is only reset when force_abort is off in
rpl_pause_after_ftwrl.
The only change between Percona XtraDB Server 5.6.48-88.0
and 5.6.49-89.0 (apart from the version number change) was
percona/percona-server@25ec240920
which we had already addressed in
commit 7c03edf2fe and
commit c0fca2863b.
Do not collect EITS statistics for this statement:
ALTER TABLE t ANALYZE PARTITION p
EITS stats are currently global, not per-partition.
Collecting global stats when we are asked to process just one partition
causes issues for DBAs.
Fix prefix key comparison in partitioning. Comparions must
take into account no more than prefix_len characters.
It used to compare prefix_len*mbmaxlen bytes.
There was no ability to set the mtr arguments of:
* --max-save-core; and
* --max-save-datadir
to 0. This is desireable in an automatied scenario where space
is limited hence targeting 10.1 branch.
We take away the 0 means unlimited aspect for these,
however, perl can handle some big numbers so they may as well be
close enough to unlimited for all meaningful purposes.
* Fix the crash: IN-to-EXISTS rewrite causes an error (and so
JOIN::optimize() fails with an error, too), don't call
update_used_tables(). Terminate the query execution instead.
* Fix the cause of the error in the IN-to-EXISTS rewrite: don't do
the rewrite if doing it will cause an error of this kind:
This version of MariaDB doesn't yet support 'SUBQUERY in ROW in left
expression of IN/ALL/ANY'
* Fix another issue exposed by this testcase:
JOIN::setup_subquery_caches() may be invoked before any select has
saved its query plan, and will crash because none of the SELECTs
has called create_explain_query_if_not_exists() to create the Explain
Data Structure for this SELECT.
TODO: When merging this to 10.2, remove the poorly-placed call to
create_explain_query_if_not_exists made by fix for M_D_E_V-16153
The srv_monitor_event and the srv_monitor_thread would not be
created when InnoDB is in read-only mode. Yet, some code would
unconditionally invoke os_event_set(srv_monitor_event).
The issue occurs when the subquery_cache is enabled.
When there is a cache miss the division was leading to a value with scale 9.
In the case of cache hit the value returned was of scale 9 and due to the different
values for the scales the where condition evaluated to FALSE, hence the output
was incomplete.
To fix this problem we need to round up the decimal to the limit mentioned in
Item::decimals. This would make sure the values are compared with the same
scale.
An oveflow was happening on windows because on Windows sizeof(ulong) is 4 bytes
while it is 8 bytes on Linux.
Switched avg_frequency and avg length for column statistics to ulonglong.
Switched avg_frequency for index statistics to ulonglong.
The only InnoDB changes between Percona XtraDB Server 5.6.47-87.0
and 5.6.48-88.0 are related to InnoDB changes between MySQL 5.6.47
and MySQL 5.6.48, which we had already applied.
- Problem is that test case creates iblogfile* files. So existing
ibdata pages could point to future LSN. Fix is that taking the
backup of data before iblogfile* creation and apply it before
exiting the test case.
failed in Diagnostics_area::set_ok_status on FUNCTION replace
When there is REPLACE in the statement, sp_drop_routine_internal() returns
0 (SP_OK) on success which is then assigned to ret. So ret becomes false
and the error state is lost. The expression inside DBUG_ASSERT()
evaluates to false and thus the assertion failure.
Make sure that the sort_buffer that is allocated has atleast space for MERGEBUFF2 keys.
The issue here was that the record length is quite high and sort buffer size is very small,
due to which we end up with zero number of keys in the sort buffer. The Sort_param::max_keys_per_buffer
was zero in such a case, due to which we were flushing empty sort_buffer to the disk.
The issue here was that the left expr and right expr of the ANY subquery
had different character sets, so we were converting the left expr to utf8 character set.
So when this conversion was happening we were actually converting the item inside the cache,
it looked like <cache>(convert(t1.l1 using utf8)), which is incorrect.
To fix this problem we are going to store the reference of the left expr and convert that
to utf8 character set, it would look like convert(<cache>(`test`.`t1`.`l1`) using utf8)
Analysis:
========
When "Profiling" is enabled, server collects the resource usage of each
statement that gets executed in current session. Profiling doesn't support
nested statements. In order to ensure this behavior when profiling is enabled
for a statement, there should not be any other active query which is being
profiled. This active query information is stored in 'current' variable. When
a nested query arrives it finds 'current' being not NULL and server aborts.
When 'init_connect' and 'init_slave' system variables are set they contain a
set of statements to be executed. "execute_init_command" is the function call
which invokes "dispatch_command" for each statement provided in
'init_connect', 'init_slave' system variables. "execute_init_command" invokes
"start_new_query" and it passes the statement list to "dispatch_command". This
"dispatch_command" intern invokes "start_new_query" which leads to nesting of
queries. Hence '!current' assert is triggered.
Fix:
===
Remove profiling from "execute_init_command" as it will be done within
"dispatch_command" execution.
On FreeBSD, perl isn't in /usr/bin, its in /usr/local/bin or
elsewhere in the path.
Like storage/{maria/unittest/,}ma_test_* , we use /usr/bin/env to
find perl and run it.
The code in fill_schema_schemata() did not take into account that
make_db_list() can leave empty db_names if the requested database
name was too long, so the call for db_names.at(0) crashed on assert.
- Moving the code testing if the database directory exists
into a separate function verify_database_directory_exists()
- Modifying the test to check if db_names is not empty
Problem:
=======
The "Start binlog_dump" message hasn't been updated to include the slave's
requested GTID position:
20:05:05 139836760311552 [Note] Start binlog_dump to slave_server(2), pos(, 4)
For diagnostic purposes, it would be helpful if the GTID position were
included.
Fix:
===
Imporve "Start binlog_dump" print message to include "using_gtid" and
"GTID position" requested by slave.
Ex:
[Note] Start binlog_dump to slave_server(2), pos(, 4), using_gtid(1),
gtid('1-1-201,2-2-100')
[Note] Start binlog_dump to slave_server(3), pos('mariadb-bin.004142',
507988273), using_gtid(0), gtid('')
The code erroneously used buff[100] in a fiew places to make
a GRANTEE value in the form:
'user'@'host'
Fix:
- Fixing the code to use (USER_HOST_BUFF_SIZE + 6) instead of 100.
- Adding a DBUG_ASSERT to make sure the buffer is enough
- Wrapping the code into a class Grantee_str, to reuse it easier in 4 places.
The real problem was that attempt to roll back cahnes after end of memory in QC was made incorrectly and lead to using uninitialized memory.
(bug has nothing to do with resize operation, it is just lack of resources erro processed incorrectly)
In case of SELECT without tables which returns either 0 or 1 rows,
JOIN::exec_inner() did not check if the flag representing SQL_CALC_FOUND_ROWS
is set or not and send_records was direclty assigned 0. So SELECT FOUND_ROWS()
was giving 0 in the output. Now it checks if the flag is set, if it is set
send_record=1 else 0. 1 is the number of rows that could have been sent
to the client if the SELECT query had SQL_CALC_FOUND_ROWS.
It is 0 when no rows were sent because the SELECT query did not have
SQL_CALC_FOUND_ROWS.
For low sort_buffer_size, in the cost calculation of using the Unique object the elements in the tree were evaluated to 0, make sure to have atleast 1 element in the Unique tree.
Also for the function Unique::get allocate memory for atleast MERGEBUFF2+1 keys.
For DECIMAL[(M[,D])] datatype max_sort_length was not being honoured which was leading to buffer
overflow while making the sort key. The fix to this problem would be to create sort keys for decimals
with atmost max_sort_key bytes
Important:
The minimum value of max_sort_length has been raised to 8 (previously was 4),
so fixed size datatypes like DOUBLE and BIGINIT are not truncated for
lower values of max_sort_length.
Backported the support for aborting and replaying stored procedure and fix for trigger
key assigments from 10.4 version.
Backported also two mtr tests: wsrep_sp_bf_abort and MDEV-20225
- `SET DEFAULT ROLE xxx [FOR yyy]` should say:
"User yyy has not been granted a role xxx" if:
- The current user (not the user `yyy` in the FOR clause) can see the
role xxx. It can see the role if:
* role exists in `mysql.roles_mappings` (traverse the graph),
* If the current user has read access on `mysql.user` table - in
that case, it can see all roles, granted or not.
- Otherwise it should be "Invalid role specification".
In other words, it should not be possible to use `SET DEFAULT ROLE` to discover whether a specific role exist or not.
The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
that could be left unprocessed and thus to mix up the last executed
binlog group's file and position:
the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
is_until_satisfied.
The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.
An extra print out of the requested until file:pos is arranged
with --log-warning=3.
