This commit contains a merge from 10.5-MDEV-29293-squash
into 10.6.
Although the bug MDEV-29293 was not reproducible with 10.6,
the fix contains several improvements for wsrep KILL query and
BF abort handling, and addresses the following issues:
* MDEV-30307 KILL command issued inside a transaction is
problematic for galera replication:
This commit will remove KILL TOI replication, so Galera side
transaction context is not lost during KILL.
* MDEV-21075 KILL QUERY maintains nodes data consistency but
breaks GTID sequence: This is fixed as well as KILL does not
use TOI, and thus does not change GTID state.
* MDEV-30372 Assertion in wsrep-lib state: This was caused by
BF abort or KILL when local transaction was in the middle
of group commit. This commit disables THD::killed handling
during commit, so the problem is avoided.
* MDEV-30963 Assertion failure !lock.was_chosen_as_deadlock_victim
in trx0trx.h:1065: The assertion happened when the victim was
BF aborted via MDL while it was committing. This commit changes
MDL BF aborts so that transactions which are committing cannot
be BF aborted via MDL. The RQG grammar attached in the issue
could not reproduce the crash anymore.
Original commit message from 10.5 fix:
MDEV-29293 MariaDB stuck on starting commit state
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Make galera_var_retry_autocommit result more readable by echoing
cases and expectations into result. Only one expected result for
reap to verify that server returns expected status for query.
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_bf_abort_registering to check that registering trx gets
BF aborted through MDL.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This is a backport from 10.5.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This patch also fixes some bugs detected by valgrind after this
patch:
- Not enough copy_func elements was allocated by Create_tmp_table() which
causes an memory overwrite in Create_tmp_table::add_fields()
I added an ASSERT() to be able to detect this also without valgrind.
The bug was that TMP_TABLE_PARAM::copy_fields was not correctly set
when calling create_tmp_table().
- Aria::empty_bits is not allocated if there is no varchar/char/blob
fields in the table. Fixed code to take this into account.
This cannot cause any issues as this is just a memory access
into other Aria memory and the content of the memory would not be used.
- Aria::last_key_buff was not allocated big enough. This may have caused
issues with rtrees and ma_extra(HA_EXTRA_REMEMBER_POS) as they
would use the same memory area.
- Aria and MyISAM didn't take extended key parts into account, which
caused problems when copying rec_per_key from engine to sql level.
- Mark asan builds with 'asan' in version strihng to detect these in
not_valgrind_build.inc.
This is needed to not have main.sp-no-valgrind fail with asan.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
This makes it easier to compare different costs and also allows
the optimizer to optimizer different storage engines more reliably.
- Added tests/check_costs.pl, a tool to verify optimizer cost calculations.
- Most engine costs has been found with this program. All steps to
calculate the new costs are documented in Docs/optimizer_costs.txt
- User optimizer_cost variables are given in microseconds (as individual
costs can be very small). Internally they are stored in ms.
- Changed DISK_READ_COST (was DISK_SEEK_BASE_COST) from a hard disk cost
(9 ms) to common SSD cost (400MB/sec).
- Removed cost calculations for hard disks (rotation etc).
- Changed the following handler functions to return IO_AND_CPU_COST.
This makes it easy to apply different cost modifiers in ha_..time()
functions for io and cpu costs.
- scan_time()
- rnd_pos_time() & rnd_pos_call_time()
- keyread_time()
- Enhanched keyread_time() to calculate the full cost of reading of a set
of keys with a given number of ranges and optional number of blocks that
need to be accessed.
- Removed read_time() as keyread_time() + rnd_pos_time() can do the same
thing and more.
- Tuned cost for: heap, myisam, Aria, InnoDB, archive and MyRocks.
Used heap table costs for json_table. The rest are using default engine
costs.
- Added the following new optimizer variables:
- optimizer_disk_read_ratio
- optimizer_disk_read_cost
- optimizer_key_lookup_cost
- optimizer_row_lookup_cost
- optimizer_row_next_find_cost
- optimizer_scan_cost
- Moved all engine specific cost to OPTIMIZER_COSTS structure.
- Changed costs to use 'records_out' instead of 'records_read' when
recalculating costs.
- Split optimizer_costs.h to optimizer_costs.h and optimizer_defaults.h.
This allows one to change costs without having to compile a lot of
files.
- Updated costs for filter lookup.
- Use a better cost estimate in best_extension_by_limited_search()
for the sorting cost.
- Fixed previous issues with 'filtered' explain column as we are now
using 'records_out' (min rows seen for table) to calculate filtering.
This greatly simplifies the filtering code in
JOIN_TAB::save_explain_data().
This change caused a lot of queries to be optimized differently than
before, which exposed different issues in the optimizer that needs to
be fixed. These fixes are in the following commits. To not have to
change the same test case over and over again, the changes in the test
cases are done in a single commit after all the critical change sets
are done.
InnoDB changes:
- Updated InnoDB to not divide big range cost with 2.
- Added cost for InnoDB (innobase_update_optimizer_costs()).
- Don't mark clustered primary key with HA_KEYREAD_ONLY. This will
prevent that the optimizer is trying to use index-only scans on
the clustered key.
- Disabled ha_innobase::scan_time() and ha_innobase::read_time() and
ha_innobase::rnd_pos_time() as the default engine cost functions now
works good for InnoDB.
Other things:
- Added --show-query-costs (\Q) option to mysql.cc to show the query
cost after each query (good when working with query costs).
- Extended my_getopt with GET_ADJUSTED_VALUE which allows one to adjust
the value that user is given. This is used to change cost from
microseconds (user input) to milliseconds (what the server is
internally using).
- Added include/my_tracker.h ; Useful include file to quickly test
costs of a function.
- Use handler::set_table() in all places instead of 'table= arg'.
- Added SHOW_OPTIMIZER_COSTS to sys variables. These are input and
shown in microseconds for the user but stored as milliseconds.
This is to make the numbers easier to read for the user (less
pre-zeros). Implemented in 'Sys_var_optimizer_cost' class.
- In test_quick_select() do not use index scans if 'no_keyread' is set
for the table. This is what we do in other places of the server.
- Added THD parameter to Unique::get_use_cost() and
check_index_intersect_extension() and similar functions to be able
to provide costs to called functions.
- Changed 'records' to 'rows' in optimizer_trace.
- Write more information to optimizer_trace.
- Added INDEX_BLOCK_FILL_FACTOR_MUL (4) and INDEX_BLOCK_FILL_FACTOR_DIV (3)
to calculate usage space of keys in b-trees. (Before we used numeric
constants).
- Removed code that assumed that b-trees has similar costs as binary
trees. Replaced with engine calls that returns the cost.
- Added Bitmap::find_first_bit()
- Added timings to join_cache for ANALYZE table (patch by Sergei Petrunia).
- Added records_init and records_after_filter to POSITION to remember
more of what best_access_patch() calculates.
- table_after_join_selectivity() changed to recalculate 'records_out'
based on the new fields from best_access_patch()
Bug fixes:
- Some queries did not update last_query_cost (was 0). Fixed by moving
setting thd->...last_query_cost in JOIN::optimize().
- Write '0' as number of rows for const tables with a matching row.
Some internals:
- Engine cost are stored in OPTIMIZER_COSTS structure. When a
handlerton is created, we also created a new cost variable for the
handlerton. We also create a new variable if the user changes a
optimizer cost for a not yet loaded handlerton either with command
line arguments or with SET
@@global.engine.optimizer_cost_variable=xx.
- There are 3 global OPTIMIZER_COSTS variables:
default_optimizer_costs The default costs + changes from the
command line without an engine specifier.
heap_optimizer_costs Heap table costs, used for temporary tables
tmp_table_optimizer_costs The cost for the default on disk internal
temporary table (MyISAM or Aria)
- The engine cost for a table is stored in table_share. To speed up
accesses the handler has a pointer to this. The cost is copied
to the table on first access. If one wants to change the cost one
must first update the global engine cost and then do a FLUSH TABLES.
This was done to be able to access the costs for an open table
without any locks.
- When a handlerton is created, the cost are updated the following way:
See sql/keycaches.cc for details:
- Use 'default_optimizer_costs' as a base
- Call hton->update_optimizer_costs() to override with the engines
default costs.
- Override the costs that the user has specified for the engine.
- One handler open, copy the engine cost from handlerton to TABLE_SHARE.
- Call handler::update_optimizer_costs() to allow the engine to update
cost for this particular table.
- There are two costs stored in THD. These are copied to the handler
when the table is used in a query:
- optimizer_where_cost
- optimizer_scan_setup_cost
- Simply code in best_access_path() by storing all cost result in a
structure. (Idea/Suggestion by Igor)
One effect of this change in the test suite is that tests with very few
rows changed to use sub queries instead of materialization. This is
correct and expected as for these the materialization overhead is too high.
A lot of tests where fixed to still use materialization by adding a
few rows to the tables (most tests has only 2-3 rows and are thus easily
affected when cost computations are changed).
Other things:
- Added more variables to TMPTABLE_COSTS for better cost calculation
- Added cost of copying rows to TMPTABLE_COSTS lookup and write
- Added THD::optimizer_cache_hit_ratio for easier cost calculations
- Added DISK_FAST_READ_SIZE to be used when calculating costs when
reading big blocks from a disk
If two high priority threads have lock conflict, we look at the
order of these transactions and honor the earlier transaction.
for_locking parameter in lock_rec_has_to_wait() has become
obsolete and it is now removed from the code .
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
The rather recent thd_need_ordering_with() function does not take
high priority transactions' order in consideration. Chaged this
funtion to compare also transaction seqnos and favor earlier transaction.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
* "public" should work in any letter case
* PUBLIC is not a valid definer
* granting to public should auto-create an entry in mysql.global_priv
* SHOW GRANTS should show privileges obtained via PUBLIC
* LEX_USER::is_public was often uninitialized
* comments, whitespaces, typos, etc
when assigning the cached item to the Item_cache for the first time
make sure to use Item_cache::setup(), not Item_cache::store().
Because the former copies the metadata (and allocates memory, in case
of Item_cache_row), and Item_cache::decimal must be set for
comparisons to work correctly.
