ha_innobase::defragment_table(): Skip corrupted indexes and
FULLTEXT INDEX. In InnoDB, FULLTEXT INDEX is implemented with
auxiliary tables. We will not defragment them on OPTIMIZE TABLE.
MDEV-11581: Mariadb starts InnoDB encryption threads
when key has not changed or data scrubbing turned off
Background: Key rotation is based on background threads
(innodb-encryption-threads) periodically going through
all tablespaces on fil_system. For each tablespace
current used key version is compared to max key age
(innodb-encryption-rotate-key-age). This process
naturally takes CPU. Similarly, in same time need for
scrubbing is investigated. Currently, key rotation
is fully supported on Amazon AWS key management plugin
only but InnoDB does not have knowledge what key
management plugin is used.
This patch re-purposes innodb-encryption-rotate-key-age=0
to disable key rotation and background data scrubbing.
All new tables are added to special list for key rotation
and key rotation is based on sending a event to
background encryption threads instead of using periodic
checking (i.e. timeout).
fil0fil.cc: Added functions fil_space_acquire_low()
to acquire a tablespace when it could be dropped concurrently.
This function is used from fil_space_acquire() or
fil_space_acquire_silent() that will not print
any messages if we try to acquire space that does not exist.
fil_space_release() to release a acquired tablespace.
fil_space_next() to iterate tablespaces in fil_system
using fil_space_acquire() and fil_space_release().
Similarly, fil_space_keyrotation_next() to iterate new
list fil_system->rotation_list where new tables.
are added if key rotation is disabled.
Removed unnecessary functions fil_get_first_space_safe()
fil_get_next_space_safe()
fil_node_open_file(): After page 0 is read read also
crypt_info if it is not yet read.
btr_scrub_lock_dict_func()
buf_page_check_corrupt()
buf_page_encrypt_before_write()
buf_merge_or_delete_for_page()
lock_print_info_all_transactions()
row_fts_psort_info_init()
row_truncate_table_for_mysql()
row_drop_table_for_mysql()
Use fil_space_acquire()/release() to access fil_space_t.
buf_page_decrypt_after_read():
Use fil_space_get_crypt_data() because at this point
we might not yet have read page 0.
fil0crypt.cc/fil0fil.h: Lot of changes. Pass fil_space_t* directly
to functions needing it and store fil_space_t* to rotation state.
Use fil_space_acquire()/release() when iterating tablespaces
and removed unnecessary is_closing from fil_crypt_t. Use
fil_space_t::is_stopping() to detect when access to
tablespace should be stopped. Removed unnecessary
fil_space_get_crypt_data().
fil_space_create(): Inform key rotation that there could
be something to do if key rotation is disabled and new
table with encryption enabled is created.
Remove unnecessary functions fil_get_first_space_safe()
and fil_get_next_space_safe(). fil_space_acquire()
and fil_space_release() are used instead. Moved
fil_space_get_crypt_data() and fil_space_set_crypt_data()
to fil0crypt.cc.
fsp_header_init(): Acquire fil_space_t*, write crypt_data
and release space.
check_table_options()
Renamed FIL_SPACE_ENCRYPTION_* TO FIL_ENCRYPTION_*
i_s.cc: Added ROTATING_OR_FLUSHING field to
information_schema.innodb_tablespace_encryption
to show current status of key rotation.
Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
crashes server
This bug is the result of merging the Oracle MySQL follow-up fix
BUG#22963169 MYSQL CRASHES ON CREATE FULLTEXT INDEX
without merging the base bug fix:
Bug#79475 Insert a token of 84 4-bytes chars into fts index causes
server crash.
Unlike the above mentioned fixes in MySQL, our fix will not change
the storage format of fulltext indexes in InnoDB or XtraDB
when a character encoding with mbmaxlen=2 or mbmaxlen=3
and the length of a word is between 128 and 84*mbmaxlen bytes.
The Oracle fix would allocate 2 length bytes for these cases.
Compatibility with other MySQL and MariaDB releases is ensured by
persisting the used maximum length in the SYS_COLUMNS table in the
InnoDB data dictionary.
This fix also removes some unnecessary strcmp() calls when checking
for the legacy default collation my_charset_latin1
(my_charset_latin1.name=="latin1_swedish_ci").
fts_create_one_index_table(): Store the actual length in bytes.
This metadata will be written to the SYS_COLUMNS table.
fts_zip_initialize(): Initialize only the first byte of the buffer.
Actually the code should not even care about this first byte, because
the length is set as 0.
FTX_MAX_WORD_LEN: Define as HA_FT_MAXCHARLEN * 4 aka 336 bytes,
not as 254 bytes.
row_merge_create_fts_sort_index(): Set the actual maximum length of the
column in bytes, similar to fts_create_one_index_table().
row_merge_fts_doc_tokenize(): Remove the redundant parameter word_dtype.
Use the actual maximum length of the column. Calculate the extra_size
in the same way as row_merge_buf_encode() does.
Change default to zlib, this has effect only if user has
explicitly requested page compression and then user
naturally expects that pages are really compressed
if they can be compressed.
Sometimes innodb_data_file_size_debug was reported as INT UNSIGNED
instead of BIGINT UNSIGNED. Make it uint instead of ulong to get
a more deterministic result.
InnoDB shutdown failed to properly take fil_crypt_thread() into account.
The encryption threads were signalled to shut down together with other
non-critical tasks. This could be much too early in case of slow shutdown,
which could need minutes to complete the purge. Furthermore, InnoDB
failed to wait for the fil_crypt_thread() to actually exit before
proceeding to the final steps of shutdown, causing the race conditions.
Furthermore, the log_scrub_thread() was shut down way too early.
Also it should remain until the SRV_SHUTDOWN_FLUSH_PHASE.
fil_crypt_threads_end(): Remove. This would cause the threads to
be terminated way too early.
srv_buf_dump_thread_active, srv_dict_stats_thread_active,
lock_sys->timeout_thread_active, log_scrub_thread_active,
srv_monitor_active, srv_error_monitor_active: Remove a race condition
between startup and shutdown, by setting these in the startup thread
that creates threads, not in each created thread. In this way, once the
flag is cleared, it will remain cleared during shutdown.
srv_n_fil_crypt_threads_started, fil_crypt_threads_event: Declare in
global rather than static scope.
log_scrub_event, srv_log_scrub_thread_active, log_scrub_thread():
Declare in static rather than global scope. Let these be created by
log_init() and freed by log_shutdown().
rotate_thread_t::should_shutdown(): Do not shut down before the
SRV_SHUTDOWN_FLUSH_PHASE.
srv_any_background_threads_are_active(): Remove. These checks now
exist in logs_empty_and_mark_files_at_shutdown().
logs_empty_and_mark_files_at_shutdown(): Shut down the threads in
the proper order. Keep fil_crypt_thread() and log_scrub_thread() alive
until SRV_SHUTDOWN_FLUSH_PHASE, and check that they actually terminate.
This commit is for optimizing WSREP(thd) macro.
#define WSREP(thd) \
(WSREP_ON && wsrep && (thd && thd->variables.wsrep_on))
In this we can safely remove wsrep and thd. We are not removing WSREP_ON
because this will change WSREP(thd) behaviour.
Patch Credit:- Nirbhay Choubay, Sergey Vojtovich
fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
Reduce the number of calls to encryption_get_key_get_latest_version
when doing key rotation with two different methods:
(1) We need to fetch key information when tablespace not yet
have a encryption information, invalid keys are handled now
differently (see below). There was extra call to detect
if key_id is not found on key rotation.
(2) If key_id is not found from encryption plugin, do not
try fetching new key_version for it as it will fail anyway.
We store return value from encryption_get_key_get_latest_version
call and if it returns ENCRYPTION_KEY_VERSION_INVALID there
is no need to call it again.
crashes server
This bug is the result of merging the Oracle MySQL follow-up fix
BUG#22963169 MYSQL CRASHES ON CREATE FULLTEXT INDEX
without merging the base bug fix:
Bug#79475 Insert a token of 84 4-bytes chars into fts index causes
server crash.
Unlike the above mentioned fixes in MySQL, our fix will not change
the storage format of fulltext indexes in InnoDB or XtraDB
when a character encoding with mbmaxlen=2 or mbmaxlen=3
and the length of a word is between 128 and 84*mbmaxlen bytes.
The Oracle fix would allocate 2 length bytes for these cases.
Compatibility with other MySQL and MariaDB releases is ensured by
persisting the used maximum length in the SYS_COLUMNS table in the
InnoDB data dictionary.
This fix also removes some unnecessary strcmp() calls when checking
for the legacy default collation my_charset_latin1
(my_charset_latin1.name=="latin1_swedish_ci").
fts_create_one_index_table(): Store the actual length in bytes.
This metadata will be written to the SYS_COLUMNS table.
fts_zip_initialize(): Initialize only the first byte of the buffer.
Actually the code should not even care about this first byte, because
the length is set as 0.
FTX_MAX_WORD_LEN: Define as HA_FT_MAXCHARLEN * 4 aka 336 bytes,
not as 254 bytes.
row_merge_create_fts_sort_index(): Set the actual maximum length of the
column in bytes, similar to fts_create_one_index_table().
row_merge_fts_doc_tokenize(): Remove the redundant parameter word_dtype.
Use the actual maximum length of the column. Calculate the extra_size
in the same way as row_merge_buf_encode() does.
In InnoDB and XtraDB functions that declare pointer parameters as nonnull,
remove nullness checks, because GCC would optimize them away anyway.
Use #ifdef instead of #if when checking for a configuration flag.
Clang says that left shifts of negative values are undefined.
So, use ~0U instead of ~0 in a number of macros.
Some functions that were defined as UNIV_INLINE were declared as
UNIV_INTERN. Consistently use the same type of linkage.
ibuf_merge_or_delete_for_page() could pass bitmap_page=NULL to
buf_page_print(), conflicting with the __attribute__((nonnull)).
This is not a fix, this is instrumentation to find out is MySQL frm dictionary
and InnoDB data dictionary really out-of-sync when this assertion is fired,
or is there some other reason (bug).
Two problems:
(1) When pushing warning to sql-layer we need to check that thd != NULL
to avoid NULL-pointer reference.
(2) At tablespace key rotation if used key_id is not found from
encryption plugin tablespace should not be rotated.
Analysis: By design InnoDB was reading first page of every .ibd file
at startup to find out is tablespace encrypted or not. This is
because tablespace could have been encrypted always, not
encrypted newer or encrypted based on configuration and this
information can be find realible only from first page of .ibd file.
Fix: Do not read first page of every .ibd file at startup. Instead
whenever tablespace is first time accedded we will read the first
page to find necessary information about tablespace encryption
status.
TODO: Add support for SYS_TABLEOPTIONS where all table options
encryption information included will be stored.
commit ef92aaf9ec
Author: Jan Lindström <jan.lindstrom@mariadb.com>
Date: Wed Jun 22 22:37:28 2016 +0300
MDEV-10083: Orphan ibd file when playing with foreign keys
Analysis: row_drop_table_for_mysql did not allow dropping
referenced table even in case when actual creating of the
referenced table was not successfull if foreign_key_checks=1.
Fix: Allow dropping referenced table even if foreign_key_checks=1
if actual table create returned error.
Use direct persistent index corruption set on InnoDB dictionary
for this test. Do not allow creating new indexes if one of the
existing indexes is already marked as corrupted.
take MDL_SHARED_WRITE instead of MDL_SHARED_NO_READ_WRITE
for OPTIMIZE TABLE. For engines that need a stronger
lock (like MyISAM), reopen the table with
MDL_SHARED_NO_READ_WRITE.
Problem was that in-place online alter table was used on a table
that had mismatch between MySQL frm file and InnoDB data dictionary.
Fixed so that traditional "Copy" method is used if the MySQL frm
and InnoDB data dictionary is not consistent.
