to 5.1 partially. This patch brings what was left to mysql-next-mr.
Original revisions in 6.0:
------------------------------------------------------------
revno: 2617.31.26
committer: Alexander Nozdrin <alik@sun.com>
branch nick: 6.0-rt-bug43138.3
timestamp: Thu 2009-04-30 19:31:30 +0400
message:
Fix for Bug#43138: DROP DATABASE failure does not clean up message list.
The problem was that the high-level function mysql_rm_db() invoked
low-level mysql_rm_table_part2(), which reported low-level error
(Unknown table) if SE refused to delete a table. Also when
mysql_rm_table_part2() reported an error, it didn't add corresponding
warning into the list (because it is used from other places where such
behaviour is required).
The fix is to
1. Remove no_warnings_for_error usage from sql_table.cc
2. Improve internal error handler support in THD, so that
a stack of error handlers is allowed.
3. Create an internal error handler (Drop_table_error_handler)
to silence useless warnings.
4. Use the handler in DROP DATABASE and DROP TABLE statements.
------------------------------------------------------------
revno: 2617.69.38
committer: Alexander Nozdrin <alik@sun.com>
branch nick: mysql-next-bugfixing-bug37431
timestamp: Mon 2009-08-24 21:52:09 +0400
message:
A test case for Bug#37431 (DROP TABLE does not report errors correctly).
------------------------------------------------------------
revno: 2617.31.29
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Fri 2009-05-01 17:37:34 +0400
message:
Follow-up for fix for bug "Bug#43138: DROP DATABASE failure
does not clean up message list".
Fixed drop.test failure under non-debug server by moving part
of test dependent on debug-only feature to separate .test file,
which won't be run for non-debug versions of server.
------------------------------------------------------------
revno: 2617.45.17
committer: Sergei Golubchik <serg@mysql.com>
branch nick: 6.0-maria
timestamp: Wed 2009-05-13 20:08:58 +0200
message:
followup for bug#43138
if delete fails with a permission denied error, we want to show it
------------------------------------------------------------
The patch was backported to 5.1 in scope of Bug#42364 by
the following revision:
------------------------------------------------------------
revno: 2497.975.3
committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Fri 2009-07-03 13:22:06 +0500
message:
Bug#42364 SHOW ERRORS returns empty resultset after dropping non existent table
enabled message storing into error message list
for 'drop table' command
------------------------------------------------------------
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
A fix and a test case for Bug#34898 "mysql_info() reports 0 warnings
while mysql_warning_count() reports 1"
Review the patch by Chad Miller, implement review comments
(since Chad left) and push the patch.
This bug is actually not a bug. At least according to Monty.
See Bug#841 "wrong number of warnings" reported back in July 2003
and closed as "not a bug".
mysql_info() was printing the number of truncated columns, not
the number of warnings.
But since the message of mysql_info() was "Warnings: <number of truncated
columns>", people would expect to get the number
of warnings in it, not the number of truncated columns.
So a possible fix would be to change the message of mysql_info()
to say Rows changed: <n>, truncated: <m>.
Instead, put the number of warnings there. That is, remove the
feature that thd->cuted_fields (the number of truncated fields)
is exposed to the client. The number of truncated columns can be
calculated on the client, by analyzing SHOW WARNINGS output,
and in future we may remove thd->cuted_fields altogether.
So let's have one less thing to worry about.
client/mysqltest.cc:
Fix a bug in mysqltest program which used to return
a wrong number of affected rows in ps-protocol, and a wrong
mysql_info() information in both protocols in presence of warnings.
mysql-test/r/insert.result:
Update results (Bug#34898)
mysql-test/suite/rpl/r/rpl_udf.result:
Update to the changed output of mysqltest: mysql_info() is now printed
before warnings.
mysql-test/t/insert.test:
Add a test case for Bug#34898.
sql/sql_table.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
sql/sql_update.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
sql/sql_class.cc:
Key_part_spec::field_name is now LEX_STRING. Adjusted code accordingly.
sql/sql_class.h:
Changed type of Key_part_spec::field_name and Key::name to LEX_STRING in
order to avoid extra strlen() calls in code responsible for semantic
analysis and statement execution (e.g. in future code responsible for
saving/restoring info about foreign keys).
sql/sql_lex.cc:
Moved null_lex_str from sql_yacc.yy to sql_lex.cc and added its
declaration to sql_lex.h to make it accessible in other SQL-layer
modules (e.g. sql_parse.cc).
sql/sql_lex.h:
Made null_lex_str accessible from outside of sql_lex.cc.
sql/sql_parse.cc:
Key_part_spec::field_name and Key::name are now LEX_STRING. Adjusted
code accordingly.
sql/sql_table.cc:
Adjusted code to accomodate change of type to LEX_STRING for
Key_part_spec::field_name and Key::name.
sql/sql_yacc.yy:
Now Key::name and Key_part_spec::field_name are LEX_STRINGs. Adjusted
grammar to be able properly initialize them. This should allow us to
save on some strlen() calls during later stages of statement execution.
An ALTER TABLE statement which added a column and added
a non-partial index on it failed with:
"ERROR 1089 (HY000): Incorrect sub part key; the used
key part isn't a string, the used length is longer than
the key part, or the storage engine doesn't support unique
sub keys"
In a check introduced to fix an earlier bug (no. 26794),
to allow for indices on spatial type columns, the
test expression was flawed (a logical OR was used instead
of a logical AND), which led to this regression.
The code in question does a sanity check on the key, and
the flawed code mistakenly classified any index created
in the way specified above as a partial index. Since
many data types does not allow partial indices, the
statement would fail.
lowercasing table name".
In lower_case_table_names > 0 mode some queries to I_S left entries
with incorrect key in table definition cache. This wasted memory and
caused some of the further queries to I_S to produce stale results
in cases when table definition was changed by a DDL statement.
Also in combination with similar problem in CREATE TABLE (which also
has peeked into table definition cache using non-normalized key) this
issue led to to spurious ER_TABLE_EXISTS_ERROR errors when one tried
to create a table with the same name as a previously existing but
dropped table (assuming that table name contained characters in upper
case).
This problem occured due to fact that fill_schema_table_from_frm()
was not properly normalizing (lowercasing) database and table names
which it used for lookups in table definition cache.
This fix adds proper normalization to this function. It also solves
similar problem in CREATE TABLE's code by ensuring that it uses
properly normalized version of table name when it peeks into table
definition cache instead of non-normalized one.
mysql-test/r/lowercase_table2.result:
Added test for #44738 "fill_schema_table_from_frm() opens tables
without lowercasing table name".
mysql-test/t/lowercase_table2.test:
Added test for #44738 "fill_schema_table_from_frm() opens tables
without lowercasing table name".
sql/sql_show.cc:
Normalize database and table name before using them for looking
up entry in table definition cache.
sql/sql_table.cc:
Ensure that CREATE TABLE uses properly normalized version of table
name when it peeks into table definition cache.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
mysql-test/include/have_not_innodb_plugin.inc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added include file to allow test for only the
'old' built-in innodb engine
mysql-test/r/not_true.require:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added require to match 'not' TRUE
mysql-test/r/partition_innodb_builtin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/r/partition_innodb_plugin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the new plugin innodb engine
mysql-test/t/disabled.def:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Disabling the new test until the fix is
included in the InnoDB source too.
mysql-test/t/partition_innodb_builtin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/t/partition_innodb_plugin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the new plugin innodb engine
sql/mysql_priv.h:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added thd as a parameter to explain_filename
to be able to use the correct quote character
sql/sql_table.cc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Changed explain_filename, so that it does qouting
correctly according to the sessions qoute char.
checksum)"
The problem was that checksum of GEOMETRY type used memory addresses
in the computation, making it un-repeatable thus useless.
(This patch is a backport from 6.0 branch)
mysql-test/r/myisam.result:
test case for bug35570 that same tables give same checksums
mysql-test/t/myisam.test:
test case for bug35570 that same tables give same checksums
sql/sql_table.cc:
Type GEOMETRY is implemented on top of type BLOB, so, just like for BLOB,
its 'field' contains pointers which it does not make sense to include in
the checksum; it rather has to be converted to a string and then we can
compute the checksum.
Despite copying the value of the old table's row type
we don't always have to mark row type as being specified.
Innodb uses this to check if it can do fast ALTER TABLE
or not.
Fixed by correctly flagging the presence of row_type
only when it's actually changed.
Added a test case for 39200.
partial backport of bug43138 fix
mysql-test/r/warnings.result:
test result
mysql-test/t/warnings.test:
test case
sql/sql_class.cc:
partial backport of bug43138 fix
sql/sql_class.h:
partial backport of bug43138 fix
sql/sql_table.cc:
partial backport of bug43138 fix
can crash under load
Backport from 5.1.
Does also include key cache fixes from:
Bug 44068 (RESTORE can disable the MyISAM Key Cache)
Bug 40944 (Backup: crash after myisampack)
include/keycache.h:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Added KEY_CACHE components in_resize and waiting_for_resize_cnt.
myisam/mi_preload.c:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Added code to allow LOAD INDEX to load indexes of different block size.
mysys/mf_keycache.c:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
.
Changed resize_key_cache() to not disable the key cache
after the flush phase. Changed queue handling to use
standard functions. Wake all threads waiting on resize_queue.
We can now have read/write threads waiting there (see below).
.
Combined add_to_queue() and the wait loops that were always
following it to the new function wait_on_queue().
Combined release_queue() and the condition that was always
preceding it to the new function release_whole_queue().
.
Added code to flag and respect the exceptional situation
BLOCK_IN_EVICTION.
.
Rewrote the resize branch of find_key_block().
.
Added code to the eviction handling in find_key_block()
to catch more exceptional cases.
.
Changed key_cache_read(), key_cache_insert() and key_cache_write()
so that they lock keycache->cache_lock whenever the key cache is
initialized. Checking for a disabled cache and incrementing and
decrementing the "resize counter" is always done within the lock.
Locking and unlocking as well as counting the "resize counter" is
now done once outside the loop. All three functions can now handle
a NULL return from find_key_block. This happens in the flush phase
of a resize and demands direct file I/O. Care is taken for
secondary requests (PAGE_WAIT_TO_BE_READ) to wait in any case.
Moved block status changes behind the copying of buffer data.
key_cache_insert() does now read the block if the caller did
supply less data than a full cache block.
key_cache_write() does now take care of parallel running flushes
(BLOCK_FOR_UPDATE, BLOCK_IN_FLUSHWRITE).
.
Changed free_block() to un-initialize block variables in the
correct order and respect an exceptional BLOCK_IN_EVICTION state.
.
Changed flushing to take care for parallel running writes.
Changed flushing to avoid freeing blocks in eviction.
Changed flushing to consider that parallel writes can move blocks
from the file_blocks hash to the changed_blocks hash.
Changed flushing to take care for other parallel flushes.
Changed flushing to assure that it ends with everything flushed.
Optimized normal flush at end of statement (FLUSH_KEEP),
but let other flush types be stringent.
.
Added some comments and debugging statements.
mysys/my_static.c:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Removed an unused global variable.
sql/ha_myisam.cc:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Moved an automatic (stack) variable to the scope where it is used.
sql/sql_table.cc:
Bug#17332 - changing key_buffer_size on a running server
can crash under load
Changed TL_READ to TL_READ_NO_INSERT in mysql_preload_keys.
CREATE TABLE...LIKE...
The mysql server option 'sync_frm' is ignored when table is created with
syntax CREATE TABLE .. LIKE..
Fixed by adding the MY_SYNC flag and calling my_sync() from my_copy() when
the flag is set.
In mysql_create_table(), when the 'sync_frm' is set, MY_SYNC flag is passed
to my_copy().
Note: TestCase is not attached and can be tested manually using debugger.
client/Makefile.am:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
add my_sync to sources as it is used in my_copy() method
include/my_sys.h:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
MY_SYNC flag is added to call my_sync() method
mysys/my_copy.c:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
my_sync() is method is called when MY_SYNC is set in my_copy()
sql/sql_table.cc:
BUG#46591 - .frm file isn't sync'd with sync_frm enabled for
CREATE TABLE...LIKE...
Fixed mysql_create_like_table() to call my_sync() when opt_sync_frm variable
is set
Invalid (old?) table or database name in logs
Post push patch.
Bug was that a non partitioned table file was not
converted to system_charset, (due to table_name_len was not set).
Also missing DBUG_RETURN.
And Innodb adds quotes after calling the function,
so I added one more mode where explain_filename does not
add quotes. But it still appends the [sub]partition name
as a comment.
Also caught a minor quoting bug, the character '`' was
not quoted in the identifier. (so 'a`b' was quoted as `a`b`
and not `a``b`, this is mulitbyte characters aware.)
sql/mysql_priv.h:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added an unquoted mode
sql/share/errmsg.txt:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Removed the quoting of identifier, only leaving the translated word.
sql/sql_table.cc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Fixed quoting of '`'
Added DBUG_RETURN.
Corrected table_name_len.
Added unquoted mode.
those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"
mysql-test/r/create.result:
test that syntax is not accepted
mysql-test/t/create.test:
test that syntax is not accepted
sql/handler.cc:
remove ROW_FORMAT=PAGE
sql/handler.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(see also table.h)
sql/lex.h:
removing syntax
sql/sql_show.cc:
removing output of noise keywords in SHOW CREATE TABLE and INFORMATION_SCHEMA.TABLES
sql/sql_table.cc:
removing TRANSACTIONAL
sql/sql_yacc.yy:
removing syntax
sql/table.cc:
removing TRANSACTIONAL, PAGE_CHECKSUM. Their place in the frm file is not reclaimed,
for compatibility with older 5.1.
sql/table.h:
Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
(and there are several engines which use the content TABLE_SHARE and thus rely on a certain binary
layout of this structure).
to wrong result
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).
mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_temp_table_mix_row.test:
Added test case.
sql/sql_table.cc:
When dropping table(s) in mixed mode and current statement
logging is ROW, builds an extra DROP TEMPORARY TABLE IF
EXISTS for temporary tables that are being dropped. Later,
it logs the extra drop statement.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
There is an inconsistency with DROP DATABASE|TABLE|EVENT IF EXISTS and
CREATE DATABASE|TABLE|EVENT IF NOT EXISTS. DROP IF EXISTS statements are
binlogged even if either the DB, TABLE or EVENT does not exist. In
contrast, Only the CREATE EVENT IF NOT EXISTS is binlogged when the EVENT
exists.
This patch fixes the following cases for all the replication formats:
CREATE DATABASE IF NOT EXISTS.
CREATE TABLE IF NOT EXISTS,
CREATE TABLE IF NOT EXISTS ... LIKE,
CREAET TABLE IF NOT EXISTS ... SELECT.
sql/sql_insert.cc:
Part of the code was moved from the create_table_from_items to select_create::prepare.
When replication is row based, CREATE TABLE IF NOT EXISTS.. SELECT is binlogged if the table exists.
enabled message storing into error message list
for 'drop table' command
mysql-test/r/warnings.result:
test result
mysql-test/t/warnings.test:
test case
sql/sql_table.cc:
We should skip error sending then we should return
warnings to client as some functions may send its
own errors, so we should set no_warnings_for_error= 0
only in case of warning.
The fix is to enable message storing into error message
list for 'drop table' command(only for error case).
tests/mysql_client_test.c:
test fix
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
client/mysql.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster_binlog.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/handler.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/log.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/mysqld.cc:
removed unnecessary line
sql/parse_file.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_acl.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_base.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_db.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_delete.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_partition.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_rename.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_show.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_table.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_view.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
